Sign In  |  Register  |  About Burlingame  |  Contact Us

Burlingame, CA
September 01, 2020 10:18am
7-Day Forecast | Traffic
  • Search Hotels in Burlingame

  • CHECK-IN:
  • CHECK-OUT:
  • ROOMS:

Boeing, FAA urge operators to inspect 737 MAX jets for loose bolt

Boeing and the Federal Aviation Administration are calling for airlines operating the 737 MAX to inspect the aircraft for a possible loose bolt in the jet's rudder control system.

Aircraft manufacturer Boeing is urging airlines to inspect 737 MAX airliners for a possible loose bolt in the jet’s rudder control system, the Federal Aviation Administration (FAA) said on Thursday.

The FAA said that it is "closely monitoring targeted inspections" of Boeing 737 MAX airplanes after Boeing notified operators of newer single-aisle airplanes to look at specific tie rods that control rudder movement to see if there is any loose hardware.

Boeing recommended the inspections after an international operator of the 737 MAX found a bolt with a missing nut during routine maintenance on a mechanism in the rudder control linkage. The company also found an additional undelivered aircraft with a nut that wasn’t properly tightened.

"The issue on the particular airplane has been remedied," Boeing said in a statement provided to FOX Business. "Out of an abundance of caution, we are recommending operators inspect their 737 MAX airplanes and inform us of any findings. We informed the FAA and our customers and will continue to keep them aware of the progress."

BOEING ELIMINATED FROM AIR FORCE’S ‘DOOMSDAY PLANE’ COMPETITION

Boeing noted that there have been no in-service incidents caused by this issue and that flight crews routinely conduct checks before departing the airport gate that would alter them if the rudder weren’t functioning properly.

The company also plans to inspect all new 737 MAX airplanes for this issue before delivery. It added that the process for this inspection is relatively straightforward, requiring the removal of an access panel and visually validating that the part is installed properly, a process that it estimates would take about two hours per plane.

CHINA MADE C919 LANDS IN HONG KONG IN MAIDEN FLIGHT OUTSIDE MAINLAND, VIEWED AS FUTURE BOEING COMPETITOR

The FAA said it will remain in touch with Boeing and the airlines while inspections are underway. The aviation regulator is asking airlines to go through their approved Safety Management Systems to identify whether they have previously detected any loose hardware and to give the FAA details about how quickly the airlines can complete the two-hour inspections.

The agency added that it will consider additional action based on any further discoveries of loose or missing hardware.

GET FOX BUSINESS ON THE GO BY CLICKING HERE

The Boeing 737 MAX was grounded for 20 months around the world after it was involved in two fatal crashes in 2018 and 2019 that killed 346 people in Ethiopia and Indonesia. The accidents resulted in Boeing revamping its crew alerting and flight control systems on the 737 MAX. 

The company has retrofitted the existing fleet of MAX 8 and MAX 9 aircraft and is awaiting FAA certification of the smaller MAX 7 and larger MAX 10 variants. The company also paid a $2.5 billion settlement, including a $500 million fund to compensate victims’ families, to resolve charges related to defrauding regulators who approved the 737 MAX.

Reuters contributed to this report.

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
 
 
Copyright © 2010-2020 Burlingame.com & California Media Partners, LLC. All rights reserved.