UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C.  20549

FORM 10-Q

(Mark One)
[X] Quarterly Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the period ended March 28, 2015
or

[ ] Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the transition period from          to

 

Commission file number          0-16088

 

CPS TECHNOLOGIES CORPORATION

(Exact Name of Registrant as Specified in its Charter)

 

 

Delaware
(State or Other Jurisdiction
of Incorporation or Organization)
04-2832509
(I.R.S. Employer
Identification No.)

 

111 South Worcester Street
Norton MA
(Address of principal executive offices)

 

 

02766-2102
(Zip Code)

 

 

(508) 222-0614
Registrant’s Telephone Number, including Area Code:

 

CPS TECHNOLOGIES CORPORATION
111 South Worcester Street
Norton, MA 02766-2102
Former Name, Former Address and Former Fiscal Year if Changed since Last Report

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period than the registrant was required to file such reports), and (2) has been subject to the filing requirements for the past 90 days.  [X] Yes   [ ]  No

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). [X ] Yes [ ] No

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer or a non-accelerated filer or a smaller reporting company. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer [ ]   Accelerated filer [ ]   Non-accelerated filer [ ]   Smaller reporting company [X]

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act):
[ ] Yes       [X] No

 

APPLICABLE ONLY TO CORPORATE ISSUERS:

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date.  Number of shares of common stock outstanding as of April 23, 2015: 13,165,019.

 

PART I  FINANCIAL INFORMATION

ITEM 1  FINANCIAL STATEMENTS (Unaudited)

CPS TECHNOLOGIES CORPORATION
Balance Sheets (Unaudited)

 

  March 28,    December 27,  
   2015      2014
ASSETS           
Current assets:          
Cash and cash equivalents  $2,171,974   $2,305,580 
Accounts receivable-trade, net   4,084,110    3,589,191 
Inventories, net   2,533,671    2,528,954 
Prepaid expenses and other current assets   205,394    166,783 
Deferred taxes   666,448    682,968 
  
Total current assets   9,661,597    9,273,476 
  
Property and equipment:          
Production equipment   8,179,447    8,085,095 
Furniture and office equipment   404,856    404,856 
Leasehold improvements   832,410    759,819 
  
Total cost   9,416,713    9,249,770 
Accumulated depreciation and amortization   (8,189,591)   (8,047,561)
Construction in progress   485,986    555,334 
  
 Net property and equipment   1,713,108    1,757,543 
  
Deferred taxes, non-current portion   1,606,777    1,617,497 
  
 Total Assets  $12,981,482   $12,648,516 
  

 

See accompanying notes to financial statements.

 

(continued)

 

 

CPS TECHNOLOGIES CORPORATION
Balance Sheets (Unaudited)
(concluded)

 

LIABILITIES AND STOCKHOLDERS’    March 28,      December 27,  
EQUITY    2015      2014  
               
Current liabilities:          
Accounts payable   1,686,928    1,352,418 
Accrued expenses   886,237    1,049,616 
  
Total current liabilities   2,573,165    2,402,034 
  
Commitments (note 9)          
Stockholders’ equity:          
Common stock, $0.01 par value,          
authorized 20,000,000 and 15,000,000 shares;          
issued 13,334,792 and 13,293,092 shares;          
outstanding 13,165,019 and 13,144,489 shares;          
at March 28, 2015 and December 27, 2014, respectively   133,348    132,931 
Additional paid-in capital   34,913,344    34,763,698 
Accumulated deficit   (24,241,777)   (24,315,564)
Less cost of 169,773 and 148,603 common shares repurchased          
at March 28, 2015 and December 27, 2014, respectively   (396,598)   (334,583)
  
Total stockholders’ equity   10,408,317    10,246,482 
  
Total liabilities and stockholders’          
 equity  $12,981,482   $12,648,516 
  

 

See accompanying notes to financial statements.

CPS TECHNOLOGIES CORPORATION
Statements of Income (Unaudited)

 

  Fiscal Quarter Ended  
    March 28,      March 29,  
     2015      2014  
Revenues:          
Product sales  $5,248,012   $5,952,080 
Research and development under          
cooperative agreement   42,254    33,971 
Total revenues   5,290,266    5,986,051 
Cost of product sales   4,119,931    4,419,360 
Cost of research and development          
under cooperative agreement   34,970    28,322 
Gross Margin   1,135,365    1,538,369 
Selling, general, and          
administrative expense   1,012,838    1,125,788 
Income from operations   122,527    412,581 
Interest expense, net   —      (962)
Income before taxes   122,527    411,619 
Income tax provision   48,740    164,000 
Net income  $73,787   $247,619 
Net income  per          
basic common share  $0.01   $0.02 
Weighted average number of          
basic common shares          
outstanding   13,147,672    13,069,577 
Net income per          
diluted common share  $0.01   $0.02 
Weighted average number of          
diluted common shares          
outstanding   13,731,364    13,696,583 

 

See accompanying notes to financial statements.

CPS TECHNOLOGIES CORPORATION
Statements of Cash Flows (Unaudited)

 

  Fiscal Quarter Ended  
    March 28,      March 29,  
     2015      2014  
               
Cash flows from operating activities:          
Net income  $73,787   $247,619 
Adjustments to reconcile net income          
to cash provided by (used) in operating activities:          
Depreciation and amortization   142,030    150,547 
Share-based compensation   66,347    72,448 
Deferred taxes   48,740    164,000 
Excess tax benefit from stock options exercised   (21,500)   (17,286)
Changes in:          
Accounts receivable-trade   (494,919)   (1,589,931)
Inventories   (4,717)   (25,283)
Prepaid expenses and other current assets   (38,611)   19,665 
Accounts payable   334,510    410,324 
Accrued expenses   (163,379)   (40,600)
  
Net cash used in operating activities   (57,712)   (608,497)
  
Cash flows from investing activities:          
Purchases of property and equipment   (97,595)   (106,806)
  
Net cash used in investing          
activities   (97,595)   (106,806)
  
Cash flows from financing activities:          
Payment of capital lease obligations   —      (20,524)
Excess tax benefit from stock options exercised   21,500    17,286 
Proceeds from issuance of common stock   62,216    48,297 
Repurchase of common stock   (62,015)   (44,091)
  
Net cash provided by          
financing activities   21,701    968 
  
Net decrease in cash and cash equivalents   (133,606)   (714,335)
Cash and cash equivalents at beginning of period   2,305,580    1,571,054 
  
Cash and cash equivalents at end of period  $2,171,974   $856,719 
  
Supplemental cash flow information:          
Cash paid for taxes, net of refunds  $—     $27,456 
Interest paid  $—     $962 

 

See accompanying notes to financial statements.

CPS TECHNOLOGIES CORPORATION
Notes to Financial Statement
(Unaudited)

(1)  Nature of Business

            CPS Technologies Corporation (the “Company” or “CPS”) provides advanced material solutions to the electronics, power generation, automotive and other industries.   The Company’s primary advanced material solution is metal-matrix composites which are a combination of metal and ceramic.

            CPS also assembles housings and packages for hybrid circuits. These housings and packages may include components made of metal-matrix composites or they may include components made of more traditional materials such as aluminum, copper-tungsten, etc.

            The Company sells into several end markets including the wireless communications infrastructure market, high-performance microprocessor market, motor controller market, and other microelectronic and structural markets.  

 

(2)  Interim Financial Statements

As permitted by the rules of the Securities and Exchange Commission applicable to quarterly reports on Form 10-Q, these notes are condensed and do not contain all disclosures required by generally accepted accounting principles.

 

The accompanying financial statements are unaudited.  In the opinion of management, the unaudited financial statements of CPS reflect all normal recurring adjustments which are necessary to present fairly the financial position and results of operations for such periods.

 

The Company’s balance sheet at December 27, 2014 has been derived from the audited financial statements at that date, but does not include all of the information and footnotes required by accounting principles generally accepted in the United States of America for complete financial statements.

 

For further information, refer to the financial statements and footnotes thereto included in the Registrant’s Annual Report on Form 10-K for the year ended December 27, 2014.

The results of operations for interim periods are not necessarily indicative of the results to be expected for the full year.

           

       

(3)  Net Income Per Common and Common Equivalent Share

Basic net income per common share is calculated by dividing net income by the weighted average number of common shares outstanding during the period.  Diluted net income per common share is calculated by dividing net income by the sum of the weighted average number of common shares plus additional common shares that would have been outstanding if potential dilutive common shares had been issued for granted stock options and stock purchase rights.  Common stock equivalents are excluded from the diluted calculations when a net loss is incurred as they would be anti-dilutive.

 

The following table presents the calculation of both basic and diluted earnings per share (“EPS”):

 

  For periods ended  
    March 28,      March 29,  
     2015      2014  
          
Basic EPS Computation:      
Numerator:          
Net income  $73,787   $247,619 
Denominator:          
Weighted average          
common shares          
Outstanding   13,147,672    13,069,577 
Basic EPS  $0.01   $0.02 
Diluted EPS Computation:          
Numerator:          
Net income  $73,787   $247,619 
Denominator:          
Weighted average          
common shares          
Outstanding   13,147,672    13,069,577 
stock options   583,692    627,006 
Total Shares   13,731,364    13,696,583 
Diluted EPS  $0.01   $0.02 

 

(4)  Share-Based Payments

            The Company measures the cost of employee services received in exchange for an award of equity instruments based on the grant date fair value of the award. That cost is recognized over the period during which an employee is required to provide services in exchange for the award, the requisite service period (usually the vesting period). The Company provides an estimate of forfeitures at initial grant date. Reductions in compensation expense associated with the forfeited options are estimated at the date of grant, and this estimated forfeiture rate is adjusted periodically based on actual forfeiture experience. The company uses the Black-Scholes option pricing model to determine the fair value of the stock options granted.

 

            During the quarters ended March 28, 2015 and March 29, 2014, a total of 123,500 and 108,500 stock options, respectively  were granted to employees under the Company’s 2009 Stock Incentive Plan (the “Plan) and a total of 45,000 and 30,000 stock options were granted to outside directors, respectively.  

 

            During the quarters ended March 28, 2015 and March 29, 2014 the Company issued 41,700 and 32,900 shares, respectively as a result of employee option exercises. During the quarters ended March 28, 2015 and March 29, 2014 there were no expired stock options.

 

            During the quarters ended March 28, 2015 and March 29, 2014 the Company repurchased 21,170 and 14,964 shares, respectively from employees to facilitate their exercise of stock options.

 

As of March 28, 2015, there was $623 thousand of total unrecognized compensation cost related to nonvested share-based compensation arrangements granted under the plans; that cost is expected to be recognized over a weighted average period of 2.88 years.

  

During the quarters ended March 28, 2015 and March 29, 2014, the Company recognized $66,347 and $72,448, respectively as shared-based compensation expense related to previously granted shares under the Plan.  

 

 

(5)        Inventories

Inventories consist of the following:

    March  28,      December 27,  
     2015      2014  
  
Raw materials  $575,444   $464,243 
Work in process   1,141,234    998,209 
Finished goods   1,217,493    1,467,002 
  
Gross inventory   2,934,171    2,929,454 
Reserve for obsolescence   (400,500)   (400,500)
  
Inventories, net  $2,533,671   $2,528,954 
  

 

           

(6)        Accrued Expenses

Accrued expenses consist of the following:

    March 28,      December 27,  
     2015      2014  
            
Accrued legal and accounting  $69,807   $83,307 
Accrued payroll and related   580,055    749,019 
Accrued other   220,849    201,956 
Accrued income taxes   15,526    15,334 
  
Total accrued expenses  $886,237   $1,049,616 
  

The accrued payroll and related at March 28, 2015 and December 27, 2014 includes $35 thousand  and $110 thousand, respectively for 401k company match and $55 thousand and $313 thousand, respectively for incentive bonuses.

 

(7)        Line of Credit and Equipment Lease Facility Agreements

In early May 2014, the Company renewed its $2 million revolving line of credit (“LOC”) and $500 thousand of an equipment finance facility (“Lease Line”) with Santander Bank.  Both agreements mature in May 2015.  The LOC is secured by the accounts receivable and other assets of the Company, has an interest rate of prime plus one half of percent (.05%) and a one-year term.  The LOC and the Lease Line are cross defaulted and cross collateralized. The Company is also subject to certain financial covenants within the terms of the line of credit that require the Company to maintain a targeted debt to equity and current ratio. At March 28, 2015, the Company was in compliance with existing covenants. 

 

At March 28, 2015, the Company had no borrowing under its Lease Line.  In addition at March 28, 2015 the Company had no borrowings under the LOC while its borrowing base at the time would have permitted borrowings up to the full $2 million of the LOC.

 

(8)        Income Taxes

            At December 27, 2014, the Company had approximately $750,000 of net operating loss carryforwards available to offset future income for U.S. Federal income tax purpose.

 

The Company recorded a tax expense of $38,020 for federal income taxes and $10,720 for state income taxes during the quarter ended March 28, 2015.

 

The Company has a current and non-current deferred tax asset aggregating $2,273,225 and $2,300,465 on the Company’s balance sheet at March 28, 2015 and December 27, 2014, respectively.  A valuation allowance is required to be established or maintained when it is "more likely than not" that all or a portion of deferred tax assets will not be realized. The Company believes that it will generate sufficient future taxable income to realize the tax benefits related to the remaining deferred tax assets and as such no valuation allowance has been provided against the deferred tax asset.

 

(9)        Commitment  

The Company entered into a 10-year lease for the Norton facilities effective on March 1, 2006. The leased facilities comprise approximately 38 thousand square feet. In January 2015 this lease was amended to extended the lease to February 28, 2017.  In addition in this amendment the Company obtained two, one-year options which, if fully exercised, would enable it to continue to lease through February 28, 2019. The lease is a triple net lease wherein the Company is responsible for payment of all real estate taxes, operating costs and utilities.  The Company also has an option to buy the property and a first right of refusal during the term of the lease.  Annual rental payments are $100 thousand in year one increasing to $152 thousand at the end of the extended term.

 

In February 2011, the Company entered into a lease for an additional 13.8 thousand square feet in Attleboro, MA. The lease term is for one year and has an option to extend the lease for five additional one-year periods. Monthly rent, which includes utilities, is $6,900. The Company renewed the lease in 2013 for one additional year and also obtained two years of additional options which could extend the Company use through February 2019.  In October 2014, the Company exercised its option to extend the lease through the end of February 2016.

 

(10)       Subsequent Events

            In April 2015, the Company renewed its $2 million revolving line of credit (“LOC”) and $500 thousand of an equipment finance facility (“Lease Line”) with Santander Bank.  

           

 

ITEM 2       MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

            The following discussion and analysis of financial condition and results of operations is based upon and should be read in conjunction with the financial statements of the Company and notes thereto included in this report and the Company’s Annual Report on Form 10-K for the year ended December 27, 2014.

 

Forward-Looking Statements

            This Quarterly Report on Form 10-Q contains forward-looking statements that involve a number of risks and uncertainties. There are a number of factors that could cause the Company’s actual results to differ materially from those forecasted or projected in such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements which speak only as of the date hereof.  The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements which may be made to reflect events or changed circumstances after the date hereof or to reflect the occurrence of unanticipated events.

 

Critical Accounting Policies

            The critical accounting policies utilized by the Company in preparation of the accompanying financial statements are set forth in Part II, Item 7 of the Company’s Annual Report on Form 10-K for the year ended December 27, 2014, under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations”.  There have been no material changes to these policies since December 27, 2014.

 

Overview

            CPS Technologies Corporation (the ‘Company’ or ‘CPS’) provides advanced material solutions to the electronics, power generation, automotive and other industries. In 2008 the Company also entered into a cooperative agreement with the U.S. Army to further develop its composite technology to produce armor. The Cooperative Agreement was a four-year agreement which was subsequently extended through March 31, 2015.

 

            The Company’s products are generally used in high-power, high-reliability applications. These applications always involve energy use or energy generation and the Company’s products allow higher performance and improved energy efficiency. The Company is an important participant in the growing movement towards alternative energy and "green" lifestyles. For example, the Company’s products are used in mass transit, hybrid and electric cars, wind-turbines for electricity generation as well as routers and switches for the internet which in turn allows telecommuting.

 

            The Company’s primary advanced material solution is metal matrix composites (MMCs), a new class of materials which are a combination of metal and ceramic. CPS has a leading, proprietary position in metal matrix composites. Metal matrix composites have several superior properties compared to conventional materials including improved thermal conductivity, thermal expansion matching, stiffness and light weight which enable higher performance and higher reliability in our customers’ products.

 

            Like plastics several decades ago, we believe metal-matrix composites will penetrate many end markets over many years. CPS management believes our business model of providing advanced material solutions to a portfolio of high growth end markets which are, at any point in time, in various stages of the technology adoption lifecycle, provides CPS with the opportunity for sustained growth and a diversified customer base. We believe we have validated this model as we are now supplying customers at all stages of the technology adoption lifecycle.

 

            CPS is the leader in supplying metal matrix composites to certain high growth electronics end markets which are well along in the adoption lifecycle and therefore generating significant demand. These end markets include high-performance integrated circuits and circuit boards used in internet switches and routers, as well as motor controllers used in high-speed electric trains, subway cars and wind turbines.   CPS supplies heat spreaders, lids and baseplates to customers in these end markets. CPS is a fully qualified manufacturer for many of the world’s largest electronics OEMs.

 

            CPS also assembles housings and packages for hybrid circuits. These housings and packages may include components made of metal-matrix composites; they may include components made of more traditional materials such as aluminum, copper-tungsten, etc.

 

            A market at an earlier stage of the adoption lifecycle is the market for hybrid and electric automobiles.  The Company recently announced a multi-year supply agreement with a major tier one automotive supplier for the supply of AlSiC pin fin baseplates for use in motor controllers for hybrid and electric automobiles.

 

            We are also actively working with customers in end markets at the beginning stages of the adoption lifecycle. An example of such a market is the market for armor. In 2008 the Company entered into a cooperative agreement with the Army Research Laboratory to further develop large hybrid metal matrix composite modules which integrally combine metal matrix composites and ceramics by enveloping ceramic tiles with MMCs. This system offers a lighter weight, durable, multi-hit capable and cost competitive alternative to conventional steel, aluminum and ceramic based armor systems. CPS hybrid hard face armor modules are comprised of multiple materials completely enveloped within and mechanically and chemically bonded to lightweight and stiff aluminum metal matrix composites.

 

            The Company believes that its hybrid hard face armor tiles will find application in many military vehicles as well as armored commercial vehicles.

 

            Our products are manufactured by proprietary processes we have developed including the QuicksetTM Injection Molding Process (‘Quickset Process’) and the QuickCastTM Pressure Infiltration Process (‘QuickCast Process’).

 

            CPS was incorporated in Massachusetts in 1984 as Ceramics Process Systems Corporation and reincorporated in Delaware in April 1987 through a merger into a wholly-owned Delaware subsidiary organized for purposes of the reincorporation. In July 1987, CPS completed our initial public offering of 1.5 million shares of our Common Stock. In March 2007, we changed our name from Ceramics Process Systems Corporation to CPS Technologies Corporation.

 

 

Results of Operations for the First Fiscal Quarter of 2015 (Q1 2015) Compared to the First Fiscal Quarter of 2014 (Q1 2014); (all $ in 000’s)

 

Total revenue was $5,290 in Q1 2015, a 12% decrease compared with total revenue of $5,986 generated in Q1 2014. This decrease was due in large part to the sales of baseplates for traction products and, to a lesser degree, the sales of dissolvable ball sealers used in fracking oil and gas wells.

 

Gross margin in Q1 2015 totaled $1,135 or 21% of sales.  In Q1 2014, gross margin totaled $1,538, 26% of sales.   This reduction in the gross margin percentage was due largely to the decrease in sales volume and to price decreases of approximately $ 200, offset in part by manufacturing efficiencies.

 

Selling, general and administrative (SG&A) expenses were $1,013 in Q1 2015, down 10% compared with SG&A expenses of $1,126 in Q1 2014.  This decrease was primarily due to a reduction in  sales and marketing activities, including commissions, travel, and conference fees. 

 

Primarily as a result of lower revenues, the Company experienced a decline in operating profit to $123 and net income to $74 in Q1 2015 compared with an operating profit of $413 and net income of $248 in the same quarter of 2014.

 

 

Liquidity and Capital Resources (all $ in 000’s unless noted)

The Company’s cash and cash equivalents at March 28, 2015 totaled $2,172.  This compares to cash and cash equivalents at December 27, 2014 of $2,306. The decrease in cash was due primarily to a  $495 increase in receivables due to the fact that an unusually high portion of sales during Q4, 2014 were collected during the fourth quarter of that year. This reduction is cash was offset in part by earnings from operations of $123 plus non-cash expenses and an increase in payables and accruals of $171.

 

Accounts receivable at March 28, 2015 totaled $4.1 million compared with $3.6 million at December 27, 2014. Days Sales Outstanding (DSOs) increased from an unusually low 54 days at the end of 2014 to a more typical 69 days at the end of Q1 2015.  During Q4 of 2014, sales were weighted toward the front end of the quarter resulting in more collections during the quarter and fewer receivables

than normal at quarter end. The accounts receivable balances at December 27, 2014, and March 28, 2015 were both net of an allowance for doubtful accounts of $10.

 

Inventories totaled $2.5 million at March 28. 2015, flat with inventory levels at December 27, 

2014. The inventory turnover in 2014 was 7.1 times (based on a 5 point average) and decreased to 6.8 times for the most recent four quarters ending Q1 2015.

 

All consigned inventory is shipped under existing purchase orders and per customers’ requests. Of the inventory of $2.5 million at March 28, 2015, $754 thousand was located at customers’ locations pursuant to consigned inventory agreements. Of the total inventory of $2.5 million at December 27, 2014, $1.0 million was located at customers’ locations pursuant to consigned inventory agreements.

 

The Company financed its working capital during Q1 2015 with a combination of cash balances and funds generated from operations.  The Company expects it will continue to be able to fund its working capital requirements for the remainder of 2015 from a combination of operating cash flow, existing cash balances and borrowings under its line of credit, if necessary.

 

The Company continues to sell to a limited number of customers and the loss of any one of these customers could cause the Company to require additional external financing. Failure to generate sufficient revenues, raise additional capital or reduce certain discretionary spending could have a material adverse effect on the Company’s ability to achieve its business objectives.

Contractual Obligations

In April 2015, the Company renewed its $2 million revolving line of credit (“LOC”) and $500 thousand of an equipment finance facility (“Lease Line”) with Santander Bank.   Both agreements mature in May 2016.  The LOC is secured by the accounts receivable and other assets of the Company, has an interest rate of “prime” and a one-year term. Under the terms of the agreement, the Company is required to maintain its operating accounts with Santander Bank. The LOC and the Lease Line are cross defaulted and cross collateralized. The Company is also subject to certain financial covenants within the terms of the line of credit that require the Company to maintain a targeted coverage ratio as well as targeted debt to equity and current ratios. At March 28, 2015, the Company was in compliance with all covenants.  At March 28, 2015 the Company had no borrowings under either the LOC or the capital lease line.  Further, the Company’s  borrowing base at the time would have permitted  $2.0 million to have been borrowed under the LOC.

 

The covenants with Santander Bank are identical for the line of credit and equipment financing facility. The covenant requirements are shown below together with the actual ratios achieved:

 

Covenant Requirement Actual
Debt Service Coverage Ratio Minimum of $1.25 16
Current Ratio Minimum of 1.5X 3.5
Liabilities to Tangible Net Worth Maximum of 1.0X 0.3
Borrowings under the lease line Maximum of $500K None
Borrowings under the line of credit Maximum of $2.000K None
 

*(based on receivables at 3/28/2015)



 

Management believes that cash flows from operations, existing cash balances and the leasing and credit line in place with Santander Bank will be sufficient to fund our cash requirements for the foreseeable future. However, there is no assurance that we will be able to generate sufficient revenues or reduce certain discretionary spending in the event that planned operational goals are not met such that we will be able to meet our obligations as they become due.

 

As of March 28, 2015 the Company had $486 thousand of construction in progress.  The Company intends to finance production equipment in construction in progress and outstanding commitments under the lease agreement with existing cash balances and funds generated by operations.

 

The Company entered into a 10-year lease for the Norton facilities effective on March 1, 2006. The leased facilities comprise approximately 38 thousand square feet. In January 2015 this lease was amended to extended the lease to February 28, 2017.  In addition in this amendment the Company obtained two, one-year options which, if fully exercised, would enable it to continue to lease through February 28, 2019. The lease is a triple net lease wherein the Company is responsible for payment of all real estate taxes, operating costs and utilities.  The Company also has an option to buy the property and a first right of refusal during the term of the lease.  Annual rental payments are $100 thousand in year one increasing to $152 thousand at the end of the extended term.

 

In February 2011, the Company entered into a lease for an additional 13.8 thousand square feet in Attleboro, MA. The lease term is for one year and has an option to extend the lease for five additional one-year periods. Monthly rent, which includes utilities, is $6,900. The Company renewed the lease in 2013 for one additional year and also obtained two years of additional options which could extend the Company use through February 2019.  In October 2014, the Company exercised its option to extend the lease through the end of February 2016.

 

The Company’s contractual obligations at March 28, 2015, not including unexercised options to extend, consist of the following:

 

    Payments Due by Period
    Remaining in FY 2016 -  
  Total FY 2015 FY 2017 FY 2018 -
Operating lease obligation for facilities $361,100 $ 176,400 $ 184,700 $ --

 

 

ITEM 3             QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

The Company is not significantly exposed to the impact of interest rate changes or foreign currency fluctuations.  The Company has not used derivative financial instruments.

 

 

ITEM 4             CONTROLS AND PROCEDURES

 

(a)        The Company’s Chief Executive Officer and Chief Financial Officer have evaluated the effectiveness of the Company’s disclosure controls and procedures (as such term is defined in Rules 13a-14(c) and 15d - 14(c) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this Form 10-Q (the “Evaluation Date”).  Based on such evaluation, such officers have concluded that, as of the Evaluation Date,  1) the Company’s disclosure controls and procedures are effective to ensure that information required to be disclosed by the Company in reports the Company files under the Securities Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC and 2) the Company’s disclosure controls and procedures are effective to ensure that information required to be disclosed in the reports that the Company files or submits under the Exchange Act is accumulated and communicated to our management, including our chief executive officer and chief financial officer, to allow timely decisions regarding required disclosure.

 

(b)        Changes in Internal Controls. There has been no change in our internal control over financial reporting that occurred during our most recent fiscal quarter that has materially affected or is reasonably likely to materially affect our internal control over financial reporting.

PART II OTHER INFORMATION

 

ITEM 1             LEGAL PROCEEDINGS
            None.

 

ITEM 1A           RISK FACTORS
            There have been no material changes to the risk factors as discussed in our 2014 Form 10-K.

 

ITEM 2             UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS.
            None.

 

ITEM 3             DEFAULTS UPON SENIOR SECURITIES
            None.

 

ITEM 4             MINE SAFETY DISCLOSURES
            Not applicable.

 

ITEM 5             OTHER INFORMATION
            Not applicable.

 

ITEM 6             EXHIBITS AND REPORTS ON FORM 8-K:
 (a)       Exhibits:

Exhibit 31.1 Certification Of Chief Executive Officer Pursuant To 18 U.S.C. Section 1350, As Adopted Pursuant To Section 302 Of The Sarbanes-Oxley Act Of 2002

Exhibit 31.2 Certification Of Chief Financial Officer Pursuant To 18 U.S.C. Section 1350, As Adopted Pursuant To Section 302 Of The Sarbanes-Oxley Act Of 2002

Exhibit 32.1 Certification Pursuant To 18 U.S.C. Section 1350, As Adopted Pursuant To Section 906 Of The Sarbanes-Oxley Act Of 2002

 

(b)           Reports on Form 8-K:

On March 5, 2015 the Company filed a report on Form 8-K relating to the announcement of its financial results for the year ended December 27, 2014 as presented in a press release dated March 3, 2015.

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

CPS TECHNOLOGIES CORPORATION
(Registrant)

 

Date:    May 11, 2015
/s/        Grant C. Bennett
Grant C. Bennett
Chief Executive Officer

 

Date:    May 11, 2015

/s/        Ralph M. Norwood

Ralph M. Norwood

Chief Financial Officer