Use these links to rapidly review the document
TABLE OF CONTENTS
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Table of Contents

As filed with the Securities and Exchange Commission on June 18, 2015.

Registration No. 333-204384


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Amendment No. 2
to
FORM S-1
REGISTRATION STATEMENT
Under
THE SECURITIES ACT OF 1933

ConforMIS, Inc.
(Exact name of registrant as specified in its charter)

Delaware
(State or other jurisdiction of
incorporation or organization)
  3841
(Primary Standard Industrial
Classification Code No.)
  56-2463152
(I.R.S. Employer
Identification No.)

28 Crosby Drive
Bedford, MA 01730
(781) 345-9001
(Address, including zip code, and telephone number, including area code, of registrant's principal executive offices)

Philipp Lang, M.D.
President and Chief Executive Officer
28 Crosby Drive
Bedford, MA 01730
(781) 345-9001
(Name, address, including zip code, and telephone number, including area code, of agent for service)

Copies to:

 

 

David Cerveny, Esq.
Chief Legal Officer & General Counsel
ConforMIS, Inc.
28 Crosby Drive
Bedford, MA 01730
(781) 345-9001

 

 

Richard A. Hoffman, Esq.
Joshua D. Fox, Esq.
Wilmer Cutler Pickering Hale and Dorr LLP
60 State Street
Boston, MA 02109
(617) 526-6000

 

Peter N. Townshend, Esq.
Perkins Coie LLP
11988 El Camino Real, Suite 350
San Diego, CA 92130
(858) 720-5737

 

Richard D. Truesdell, Jr., Esq.
Sophia Hudson, Esq.
Davis Polk & Wardwell LLP
450 Lexington Avenue
New York, NY 10017
(212) 450-4000

Approximate date of commencement of proposed sale to the public:
As soon as practicable after this Registration Statement is declared effective.

           If any of the securities being registered on this form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, as amended (the "Securities Act"), please check the following box.    o

           If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.    o

           If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.    o

           If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.    o

           Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer o   Accelerated filer o   Non-accelerated filer ý
(Do not check if a
smaller reporting company)
  Smaller reporting company o

CALCULATION OF REGISTRATION FEE

               
 
Class of Securities To Be Registered
  Amount to be
Registered(1)

  Proposed Maximum
Offering Price
Per Share(2)

  Proposed Maximum
Aggregate Offering
Price(2)

  Amount of
Registration Fee(3)(4)

 

Common Stock, $0.00001 par value per share

  10,350,000   $16.00   $165,600,000   $19,243

 

(1)
Includes 1,350,000 shares of common stock the underwriters have the option to purchase.

(2)
Estimated solely for the purpose of calculating the registration fee pursuant to Rule 457(a) under the Securities Act of 1933, as amended.

(3)
Calculated pursuant to Rule 457(a) based on an estimate of the proposed maximum aggregate offering price.

(4)
A registration fee of $20,045 was previously paid in connection with the Registration Statement.

           The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933, as amended, or until the Registration Statement shall become effective on such date as the Securities and Exchange Commission, acting pursuant to said Section 8(a), may determine.

   


Table of Contents

Subject to completion, dated June 18, 2015

The information in this preliminary prospectus is not complete and may be changed. We may not sell these securities until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell these securities and it is not soliciting an offer to buy these securities in any jurisdiction where the offer or sale is not permitted.

9,000,000 shares

GRAPHIC

Common stock



This is an initial public offering of common stock by ConforMIS, Inc. We are selling 9,000,000 shares of common stock. The estimated initial public offering price is between $14.00 and $16.00 per share.



Prior to this offering, there has been no public market for our common stock. We have applied to have our common stock listed on the NASDAQ Global Market under the symbol "CFMS".

We are an emerging growth company as that term is used in the Jumpstart Our Business Startups Act of 2012, and as such, will be subject to certain reduced public reporting requirements.

  Per share     Total    

Initial public offering price

  $     $    

Underwriting discounts and commissions(1)

  $     $    

Proceeds to ConforMIS, before expenses

  $     $    

(1)
We have agreed to reimburse the underwriters for certain FINRA-related expenses. See "Underwriting" beginning on page 176 of this prospectus.

We have granted the underwriters an option for a period of 30 days to purchase up to an additional 1,350,000 shares of our common stock.

Investing in our common stock involves risks. See "Risk Factors" beginning on page 12 of this prospectus.

Neither the Securities and Exchange Commission nor any other regulatory body has approved or disapproved of these securities or passed upon the accuracy or adequacy of this prospectus. Any representation to the contrary is a criminal offense.

The underwriters expect to deliver the shares of common stock to investors on or about             , 2015.



Joint Bookrunners

J.P. Morgan       Deutsche Bank Securities

 

Co-Managers

Wells Fargo Securities   Canaccord Genuity   Oppenheimer & Co.

The date of this prospectus is             , 2015.

LOGO


Table of Contents


TABLE OF CONTENTS

 
  Page

Prospectus Summary

  1

Risk Factors

 
12

Special Note Regarding Forward-Looking Statements

 
61

Use of Proceeds

 
63

Dividend Policy

 
64

Industry and Other Data

 
64

Capitalization

 
65

Dilution

 
67

Selected Consolidated Financial Data

 
70

Management's Discussion and Analysis of Financial Condition and Results of Operations

 
72

Business

 
94

Management

 
129

Executive Compensation

 
139

Certain Relationships and Related-Persons Transactions

 
152

Principal Stockholders

 
158

Description of Capital Stock

 
162

Shares Eligible for Future Sale

 
169

Material U.S. Federal Tax Considerations for Non-U.S. Holders of Common Stock

 
172

Underwriting

 
176

Legal Matters

 
184

Experts

 
184

Where You Can Find More Information

 
184

Index to Consolidated Financial Statements

 
F-1

        Neither we nor the underwriters have authorized anyone to provide you with any information or to make any representations other than those contained in this prospectus, any amendment or supplement to this prospectus or in any free writing prospectus we may authorize to be delivered or made available to you. Neither we nor the underwriters take responsibility for, and can provide no assurance as to the reliability of, any other information that others may give you. We are offering to sell, and seeking offers to buy, shares of our common stock only in jurisdictions where offers and sales are permitted. The information contained in this prospectus is accurate only as of the date on the front cover of this prospectus, regardless of the time of delivery of this prospectus or any sale of shares of our common stock. Our business, financial condition, results of operations and prospects may have changed since that date.

        For investors outside the United States: We have not, and the underwriters have not, done anything that would permit this offering or possession or distribution of this prospectus in any jurisdiction where action for that purpose is required, other than in the United States. Persons outside the United States who come into possession of this prospectus must inform themselves about, and observe any restrictions relating to, the offering of the shares of common stock and the distribution of this prospectus outside the United States.

i


Table of Contents

 


PROSPECTUS SUMMARY

        This summary highlights selected information appearing elsewhere in this prospectus. This summary is not complete and does not contain all of the information you should consider before investing in our common stock. You should read this entire prospectus carefully, especially the "Risk Factors," "Business" and "Management's Discussion and Analysis of Financial Condition and Results of Operations" sections and our consolidated financial statements and the related notes appearing elsewhere in this prospectus before making an investment decision. Unless the context otherwise requires, we use the terms "ConforMIS," "our company," "we," "us" and "our" in this prospectus to refer to ConforMIS, Inc., together with its wholly owned subsidiaries.

Our business

        We are a medical technology company that uses our proprietary iFit Image-to-Implant technology platform to develop, manufacture and sell joint replacement implants that are individually sized and shaped, which we refer to as customized, to fit each patient's unique anatomy. The worldwide market for joint replacement products is approximately $15 billion annually and growing, and we believe our iFit technology platform is applicable to all major joints in this market. We believe we are the only company offering a broad line of customized knee implants designed to restore the natural shape of a patient's knee. We have sold more than 30,000 knee implants in the United States and Europe. In recent clinical studies, iTotal CR, our cruciate-retaining total knee replacement implant and best-selling product, demonstrated superior clinical outcomes, including better function and greater patient satisfaction compared to traditional, off-the-shelf implants. We recently initiated the limited launch of iTotal PS, our posterior-stabilized total knee replacement implant which addresses the largest segment of the knee replacement market. We expect to submit an application for clearance of iTotal Hip, our first customized hip replacement implant, to the U.S. Food and Drug Administration, or FDA, in 2015.

        Our iFit technology platform comprises three key elements:

We believe our iFit technology platform enables a highly scalable business model that greatly lowers our inventory requirements, reduces the amount of working capital required to support our operations and allows us to launch new products and product improvements more rapidly, as compared to manufacturers of traditional, off-the-shelf implants.

        We own or exclusively in-license approximately 470 issued patents and pending patent applications that cover customized implants and patient-specific instrumentation, or PSI, for all major joints and other elements of our iFit technology platform. All of our knee replacement products have been cleared by the FDA under the premarket notification process of Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the FDCA, and have received certification to CE Mark.

        We have 87 employees engaged in the sales and marketing of our products in the United States, Germany and the United Kingdom to orthopedic surgeons, hospitals and other medical facilities and patients. For the year ended December 31, 2014 we generated revenue of

 

1


Table of Contents

$48.2 million from product sales, representing a 39% increase over the prior year. For the three months ended March 31, 2015, we generated revenue of $14.7 million from product sales, representing a 36% increase over the three months ended March 31, 2014.

Market opportunity

        Osteoarthritis is the principal condition that leads to joint replacement surgery. An estimated 27 million people in the United States and 630 million people worldwide suffer from osteoarthritis. Compelling demographic trends, such as the growing population of aging yet active individuals and rising rates of obesity, are expected to be key drivers in the continued growth of osteoarthritis occurrence. The National Institutes of Health, or NIH, projects that by 2030, approximately 70 million people in the United States will be 65 years or older and at high risk of developing osteoarthritis. According to the Orthopaedic Industry Annual Report published in March 2015 by Orthoworld Inc., or the 2014 Orthoworld Report, worldwide sales of joint replacement products, including replacements for knees, hips, shoulders, elbows, wrists, ankles and digits outside of trauma, exceeded $15.4 billion in 2014 and are expected to grow to approximately $18 billion by the end of 2020.

Clinical shortcomings with off-the-shelf knee implants

        Manufacturers of traditional knee replacement implants offer products with a limited range of sizes and geometries, which we refer to as off-the-shelf implants. Off-the-shelf implants are not designed to restore a particular patient's unique anatomy and are not customized to fit an individual patient's knee. As a result, during a knee replacement procedure, the surgeon has to fit the patient's soft tissue, bones and cartilage to the fixed dimensions of the implant through an iterative process of sizing and positioning. This entails removing bone, performing bone cuts and shaping the residual bone to the implant. Surgeons often have to make compromises on implant fit, rotation and alignment because they are limited by the size and shape of the implant. These compromises can cause residual pain and functional limitations after surgery, which we believe contribute to patient dissatisfaction. Our summary of one study indicates that approximately one in five patients who receives an off-the-shelf total knee replacement is not satisfied with the results. See "Business—Industry Background—Knee implants" for a description of our summary of this study.

        In an effort to overcome the shortcomings associated with off-the-shelf implants, manufacturers have focused on improving traditional knee replacement in various ways, including the use of patient-specific instrumentation, or PSI, and robotic assistance and offering an increased range of sizes. We believe, however, that these efforts do not fully address the needs of patients, surgeons and hospitals.

The ConforMIS Solution: One Patient, One Implant

        We believe our customized joint replacement products and proprietary technology create an opportunity to disrupt the large, existing market for orthopedic implants. Based on clinical data developed independently by orthopedic surgeons comparing our iTotal CR to off-the-shelf total knee replacement implants, as well as our own research and the common approach we employ in the design and manufacture of all of our products, we believe that our customized knee replacement implants offer significant benefits to the patient, the surgeon and the hospital that are not afforded by off-the-shelf implants.

 

2


Table of Contents

Our products

Knee replacement products

        All of our knee replacement products have been cleared by the FDA under the premarket notification process of Section 510(k) of the FDCA and have received certification to CE Mark.

Hip replacement product candidate

 

3


Table of Contents

Proprietary iJigs

        Our iJigs are customized, single-use, patient-specific instruments. The iJigs we deliver with our joint replacement products include the guides and instruments the surgeon requires to remove the bone and soft tissue necessary to fit our customized implants to the patient.

Our strategy

        Our objective is for our customized implants to become the standard of care for orthopedic joint replacement surgery. We believe that our iFit Image-to-Implant technology platform will enable us to offer a wide variety of customized joint replacement implants with superior performance that offer key clinical and economic benefits over off-the-shelf implants. Key elements of our strategy to achieve our objective are to:

Risks associated with our business

        Our business is subject to a number of risks of which you should be aware before making an investment decision. These risks are discussed more fully in the "Risk Factors" section of this prospectus immediately following this prospectus summary. These risks include the following:

 

4


Table of Contents

Our company

        Our company was formed as ConforMIS, Inc., a Delaware corporation, on March 26, 2004. Our principal executive offices are located at 28 Crosby Drive, Bedford, Massachusetts 01730, and our telephone number is (781) 345-9001. Our website address is www.conformis.com. The information contained on, or that can be accessed through, our website is not a part of, and is not incorporated into, this prospectus. We have included our website address in this prospectus solely as an inactive textual reference.

        iFit® Image-to-Implant®, iTotal®, iUni®, iDuo® and iView® are our registered trademarks. The other trademarks, trade names and service marks appearing in this prospectus are the property of the respective owners. We do not intend our use or display of other companies' trademarks, trade names or service marks to imply a relationship with, or endorsement or sponsorship of us by, these other companies.

 

5


Table of Contents

Implications of being an emerging growth company

        As a company with less than $1 billion in revenue during our last fiscal year, we qualify as an "emerging growth company" as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act, and we may remain an emerging growth company until the end of the 2020 fiscal year. For so long as we remain an emerging growth company, we are permitted, and intend, to rely on exemptions from certain disclosure and other requirements that are applicable to other public companies that are not emerging growth companies. In particular, in this prospectus, we have not included all of the executive compensation-related information that would be required if we were not an emerging growth company. Accordingly, the information contained herein may be different than the information you receive from other public companies in which you hold stock.

 

6


Table of Contents

 


THE OFFERING

Common stock offered by us

  9,000,000 shares

Common stock to be outstanding after this offering

 

39,062,616 shares

Option to purchase additional shares

 

The underwriters have an option for a period of 30 days to purchase up to 1,350,000 additional shares of our common stock.

Use of proceeds

 

We estimate that the net proceeds from our issuance and sale of 9,000,000 shares of our common stock in this offering will be approximately $121 million, assuming an initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, after deducting estimated underwriting discounts and commissions and estimated offering expenses payable by us. If the underwriters exercise their option to purchase additional shares in full, we estimate that the net proceeds from this offering will be approximately $140 million.

 

We intend to use the net proceeds of this offering as follows: approximately $9 million to purchase and install capital equipment to expand our manufacturing capacity; approximately $59 million to expand and support our sales and marketing efforts; and approximately $26 million to fund research, development and clinical activities. The remaining proceeds will be used for working capital and other general corporate purposes. See "Use of Proceeds" for more information.

Risk factors

 

You should read the "Risk Factors" section starting on page 12 of this prospectus for a discussion of factors to consider carefully before deciding to invest in shares of our common stock.

Proposed NASDAQ Global Market symbol

 

"CFMS"

        The number of shares of our common stock to be outstanding after this offering is based on the following:

 

7


Table of Contents

        The number of shares of our common stock to be outstanding after this offering excludes:

        Unless otherwise indicated, all information in this prospectus reflects and assumes the following:

 

8


Table of Contents

        In addition, unless otherwise indicated, all information in this prospectus gives effect to a one-for-two reverse stock split of our common stock that became effective on June 16, 2015.

 

9


Table of Contents

 


SUMMARY CONSOLIDATED FINANCIAL DATA

        You should read the following summary consolidated financial data together with the more detailed information contained in "Selected Consolidated Financial Data," "Management's Discussion and Analysis of Financial Condition and Results of Operations" and our consolidated financial statements and the accompanying notes thereto appearing elsewhere in this prospectus. We have derived the statements of operations data for the years ended December 31, 2013 and 2014 from our audited consolidated financial statements appearing elsewhere in this prospectus. We have derived the statements of operations data for the three months ended March 31, 2014 and 2015 from our unaudited consolidated financial statements appearing elsewhere in this prospectus. Historical results are not indicative of the results to be expected in the future, and our interim period results are not necessarily indicative of results to be expected for a full year or any other interim period.

 
  Years ended
December 31,
  Three months ended
March 31,
 
(in thousands, except share and per share data)
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Consolidated statements of operations data:

                         

Revenue

  $ 34,597   $ 48,186   $ 10,799   $ 14,700  

Cost of revenue

    27,283     30,638     7,512     9,388  

Gross profit

    7,314     17,548     3,287     5,312  

Operating expenses:

   
 
   
 
   
 
   
 
 

Sales and marketing

    26,149     31,103     8,379     9,579  

Research and development

    13,779     15,107     3,578     4,016  

General and administrative

    14,693     16,763     3,948     5,780  

Total operating expenses

    54,621     62,973     15,905     19,375  

Loss from operations

    (47,307 )   (45,425 )   (12,618 )   (14,063 )

Other income and expenses

                         

Interest income

    89     104     25     39  

Interest expense

    (642 )   (360 )   (52 )   (223 )

Total other expenses

    (553 )   (256 )   (27 )   (184 )

Loss before income taxes

    (47,860 )   (45,681 )   (12,645 )   (14,247 )

Income tax provision

    29     41     8     10  

Net loss

  $ (47,889 ) $ (45,722 ) $ (12,653 ) $ (14,257 )

Net loss per share applicable to common stockholders—basic and diluted(1)

  $ (11.98 ) $ (10.78 ) $ (3.04 ) $ (3.32 )

Weighted-average number of common shares used in net loss per share applicable to common stockholders—basic and diluted(1)

    3,996,867     4,239,564     4,165,760     4,296,613  

Pro forma net loss per share applicable to common stockholders—basic and diluted (unaudited)(1)(2)

       
$

(1.53

)
     
$

(0.48

)

Pro forma weighted average number of common shares outstanding—basic and diluted (unaudited)(1)(2)

          29,965,425           30,013,474  

 

10


Table of Contents

 

 
  March 31, 2015  
(in thousands)
  Actual   Pro forma(2)   Pro forma as
adjusted(3)
 
 
  (unaudited)
   
   
 

Consolidated balance sheet data:

                   

Cash and cash equivalents

  $ 22,939   $ 22,995   $ 144,277  

Working capital

    31,065     31,121     152,403  

Total assets

    60,705     60,761     182,043  

Long-term debt, including current portion

    10,560     10,560     10,560  

Total stockholders' equity

    36,781     36,837     158,119  

(1)
See Note B in the notes to our consolidated financial statements appearing elsewhere in this prospectus for a description of the method used to calculate basic and diluted net loss per share applicable to common stockholders.

(2)
The pro forma balance sheet data give effect to (a) the exercise of warrants to purchase 9,374 shares of our preferred stock since March 31, 2015, (b) the automatic conversion of all outstanding shares of our preferred stock into 25,497,480 shares of common stock, (c) the assumed warrant exercises and (d) the Series D warrant exchange.

(3)
The pro forma as adjusted balance sheet data give further effect to our issuance and sale of 9,000,000 shares of common stock in this offering (assuming no exercise by the underwriters of their option to purchase additional shares) at an assumed initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, after deducting the underwriting discounts and commissions and estimated offering expenses payable by us.

        A $1.00 increase (decrease) in the assumed initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, would increase (decrease) the pro forma as adjusted amount of each of cash and cash equivalents, working capital and total stockholders' equity by approximately $8.4 million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting estimated underwriting discounts and commissions and estimated offering expenses payable by us.

        In connection with the closing of this offering, the holders of the net exercise warrants have the option to net exercise their warrants or exercise their warrants for cash at various exercise prices ranging from $4.32 to $12.00 per common share. In the event that all the net exercise warrants are exercised with cash consideration instead of being net exercised upon the closing of this offering, an additional 53,131 shares of our common stock would be outstanding as of the closing. In addition, the pro forma and pro forma as adjusted amount of each of cash and cash equivalents, working capital and total stockholders' equity would increase by $0.8 million.

 

11


Table of Contents


RISK FACTORS

        Investing in our common stock involves a high degree of risk. Before you decide to invest in our common stock, you should consider carefully the risks described below, together with the other information contained in this prospectus, including our consolidated financial statements and the related notes appearing at the end of this prospectus. We believe the risks described below are material to us as of the date of this prospectus. If any of the following risks actually occur, our business, financial condition, results of operations and future growth prospects could be materially and adversely affected. In these circumstances, the market price of our common stock could decline, and you may lose all or part of your investment.

Risks related to our financial position

We have incurred losses in the past, expect to incur losses for at least the next several years and may never achieve profitability.

        We have incurred significant net operating losses in every year since our inception and expect to incur net operating losses for the next several years. Our net loss was $47.9 million for the year ended December 31, 2013, $45.7 million for the year ended December 31, 2014, $14.3 million for the three months ended March 31, 2015, and $12.7 million for the three months ended March 31, 2014. As of March 31, 2015, we had an accumulated deficit of $282.4 million. We expect to continue to incur significant product development, clinical and regulatory, sales and marketing, manufacturing and other expenses as our business continues to grow and we expand our product offerings. Additionally, following this offering, our general and administrative expense will increase due to the additional operational and reporting costs associated with our expanded operations and being a public company. We will need to generate significant additional revenue to achieve and maintain profitability, and even if we achieve profitability, we cannot be sure that we will remain profitable for any substantial period of time. In addition, our growth may slow, for reasons described in these risk factors. Our failure to become and remain profitable would decrease the value of our company and could impair our ability to raise capital, expand our business, maintain our research and development efforts or continue our operations.

We expect to incur substantial expenditures in the foreseeable future and might require additional capital to support business growth. This capital might not be available on terms favorable to us or at all.

        We expect to incur substantial expenditures in the foreseeable future in connection with the following:

12


Table of Contents

        In addition, following this offering, our general and administrative expense will increase due to the additional operational and reporting costs associated with our expanded operations and being a public company.

        We anticipate that following this offering our principal sources of funds will be revenue generated from the sales of our products, borrowings under our credit facilities and revenues that we may generate in connection with licensing our intellectual property. Our credit facility with Silicon Valley Bank and Oxford Finance LLC, referred to as the SVB/Oxford Agreement, is our only committed external source of funds. In November 2014, we borrowed the first of two $10 million term loans under the SVB/Oxford Agreement. We are eligible to borrow a second term loan in a principal amount of $10 million on or prior to November 7, 2015 upon meeting certain conditions, including our being able to make certain agreed upon representations and warranties to the lenders and a determination by the lenders, in their sole discretion, that there has been no occurrence of any material adverse change, as defined in the SVB/Oxford Agreement, or any material deviation from the annual financial projections provided by us and accepted by the lenders. There can be no assurance that we will be able to satisfy these conditions or borrow the second $10 million term loan. For further information regarding this facility, see "Management's Discussion and Analysis of Financial Conditions and Results of Operations—Credit facilities—SVB/Oxford."

        We will need to generate significant additional revenue to achieve and maintain profitability, and even if we achieve profitability, we cannot be sure that we will remain profitable for any substantial period of time. Our failure to become and remain profitable could impair our ability to raise capital, expand our business, maintain our research and development efforts or continue to fund our operations.

        We may need to engage in equity or debt financings to secure additional funds, including the funds required to pay our existing indebtedness at maturity. We may not be able to obtain additional financing on terms favorable to us, or at all. In addition, the covenants, pledge of our assets as collateral and negative pledge with respect to our intellectual property under the SVB/Oxford Agreement could limit our ability to obtain additional debt financing. To the extent that we raise additional capital through the future sale of equity or convertible debt, the ownership interest of our stockholders will be diluted. The terms of these future equity or debt securities may include liquidation or other preferences that adversely affect the rights of our existing common stockholders or involve agreements that include covenants limiting or restricting our ability to take specific actions, such as incurring additional debt or making capital expenditures.

Risks related to our business, industry and competitive position

We have a limited operating history and may face difficulties encountered by early stage companies in rapidly evolving markets.

        We began operations in 2004, introduced our first product commercially in 2007 and only introduced our best-selling product, our iTotal CR, in 2011. Accordingly, we have a limited operating history upon which to base an evaluation of our business and prospects. In assessing our prospects, you must consider the risks and difficulties frequently encountered by early stage companies in new and rapidly evolving markets, particularly companies engaged in the development and sales of medical devices. These risks include our ability to:

13


Table of Contents

        We may allocate significant amounts of capital toward products or technologies for which market demand is lower than anticipated and, as a result, abandon such efforts. If we are unable to obtain adequate financing or financing on terms satisfactory to us when we require it, or if we expend capital on projects that are not successful, our ability to continue to support our business growth and to respond to business challenges could be significantly limited, and we may even have to scale back our operations. We can also be negatively affected by general economic conditions. Because of our limited operating history, we may not have insight into trends that could emerge and negatively affect our business. As a result of these or other risks, our business strategy might not be successful.

We have derived nearly all of our revenues from sales of a limited portfolio of knee replacement products and may not be able to maintain or increase revenues from these products.

        To date, we have derived nearly all of our revenues from sales of our knee replacement products, and we expect that sales of these products will continue to account for the majority of our revenues for at least the next several years. If we are unable to achieve and maintain significantly greater market acceptance of these products, we may be materially constrained in our ability to fund our operations and the development and commercialization of improvements and other products. Any factors that negatively impact sales or growth in sales of our current products, including the size of the addressable markets for these products, our failure to convince surgeons to adopt our products, competitive factors and other factors described in these risk factors, could adversely affect our business, financial condition and operating results.

We may not be successful in the development of, obtaining regulatory clearance for or commercialization of additional products.

        We are expanding our offerings to include an additional joint replacement product for the knee, iTotal PS, which we are in the process of launching commercially on a limited basis, and expect to introduce our first hip replacement product, the iTotal Hip, for which we expect to file for marketing clearance in 2015 with the FDA. However, we may not be able to successfully commercialize the iTotal PS and we may not be able to develop or obtain regulatory approval or clearance of or successfully commercialize the iTotal Hip on the timelines that we expect to, or at all. Any factors that delay the commercial launch of, including the process for obtaining regulatory clearance for, our additional products, or result in sales of our additional products increasing at a lower rate than expected, could adversely affect our business, financial condition and operation results. In addition, even if we do launch these products, there can be no assurance that these products will be accepted in the market or commercially successful or profitable.

14


Table of Contents

        All of the products we currently market in the United States have either received pre-market clearance under Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the FDCA, or are exempt from pre-market review. The FDA's 510(k) clearance process requires us to show that our proposed product is "substantially equivalent" to another legally marketed product that did not require premarket approval. This process is shorter and typically requires the submission of less supporting documentation than other FDA approval processes and does not always require clinical studies. To date, we have not been required to conduct clinical studies or obtain clinical data in order to obtain regulatory clearance in the United States for our products. Additionally, to date, we have not been required to complete clinical studies in connection with obtaining regulatory clearance for the sale of our products outside the United States. If we must conduct clinical studies or obtain clinical data to obtain regulatory clearance or approval for any of our products in the United States or elsewhere. The results of such studies may not be sufficient to support regulatory clearance or approval. In addition, our costs of developing and the time to develop our products would increase significantly. Moreover, even if we obtain regulatory clearance or approval to market a product, the FDA, in the United States, or a Notified Body, in the EU, has the power to require us to conduct postmarketing studies beyond those we contemplate conducting. We may need to raise additional funds to support any such clinical efforts, and if we are required to conduct such clinical efforts, our results of operations would be adversely affected.

We are in a highly competitive market and face competition from large, well-established companies as well as new market entrants.

        The market for orthopedic replacement products generally, and for knee and hip implant products in particular, is intensely competitive, subject to rapid change and dominated by a small number of large companies. Our principal competitors are the major producers of prosthetic knee and hip replacement products. We also compete with numerous smaller companies, many of whom have a significant regional market presence. In addition, a number of companies are developing biologic cartilage repair solutions to address osteoarthritis of the knee that could reduce the demand for knee replacement procedures and products. See "Business—Competition." Stem cell therapies and other new, emerging therapies could reduce or obviate the need for joint replacement surgery in the future.

        Many of our larger competitors are either publicly traded or divisions or subsidiaries of publicly traded companies, and enjoy several competitive advantages over us, including:

15


Table of Contents

        As a result of these advantages, our competitors may be able to develop, obtain regulatory clearance or approval for and commercialize products and technologies more quickly than us, which could impair our ability to compete. If alternative treatments are, or are perceived to be, superior to our products, or if we are unable to increase market acceptance of our products, as compared to existing or competitive products, sales of our products could be negatively affected and our results of operations could suffer. Our competitors also may seek to copy our products using similar technologies for use in other joints or applications into which we have not yet expanded, which would have the effect of reducing the market potential of our current or future products. In addition, based on their favorable attributes, we expect our products to be offered at higher price points than some competitive products, and our pricing decisions may make our products less competitive.

We are deploying a new business model in an effort to disrupt a relatively mature industry. In order to become profitable, we will need to scale this business model considerably through increased sales.

        Our business model, based on our iFit Image-to-Implant technology platform and our just-in-time delivery is new to the joint replacement industry. We manufacture our customized replacement implants and iJigs to order and do not maintain significant inventory of finished product. We deliver the customized replacement implants and iJigs to the hospital days in advance of the scheduled arthroplasty procedure. In order to deliver our product on a timely basis, we must execute our processes on a defined schedule with limited room for error. Our competitors generally sell from a pre-produced inventory and can sell products and satisfy demand without being as dependent on business continuity. Even minor delays or interruptions to our design, manufacturing or delivery processes could result in delays in our ability to deliver products to specification, or at all, thereby significantly impacting our reputation and our ability to make commercial sales. In order to become profitable, we will need to significantly increase sales of our existing products and successfully develop and commercially launch future products at a scale that we have not yet achieved. In order to increase our gross margins we will need, among other things, to:

        However, we may not be successful in achieving these objectives, and our gross margins may not increase, or could even decrease. We may not be successful in executing on our business model, in increasing our gross margins or in bringing our sales and production up to a scale that will be profitable, which would have a material adverse effect on our financial condition, results of operations and cash flows.

16


Table of Contents

To be commercially successful, we must convince orthopedic surgeons that our joint replacement products are attractive alternatives to our competitors' products.

        Orthopedic surgeons play a significant role in determining the course of treatment and, ultimately, the type of product that will be used to treat a patient. Acceptance of our products depends on educating orthopedic surgeons as to the distinctive characteristics, perceived clinical benefits, safety and cost-effectiveness of our products as compared to our competitors' products. If we are not successful in convincing orthopedic surgeons of the merits of our products or educating them on the use of our products, they may not use our products and we will be unable to increase our sales or reach profitability.

        We believe orthopedic surgeons will not widely adopt our products unless they determine, based on experience, clinical data and published peer-reviewed journal articles, that our products and the techniques to implant them provide benefits to patients and are attractive alternatives to our competitors' products. Surgeons may be hesitant to change their medical treatment practices for the following reasons, among others:

        If clinical, functional or economic data does not demonstrate the benefits of using our products, surgeons may not use our products. In such circumstances, we may not achieve expected sales and may be unable to achieve profitability. To understand the clinical, functional and economic benefits of using our products, surgeons may refer to published studies sponsored by us, conducted by orthopedic surgeons who are paid consultants to us or conducted independently by orthopedic surgeons comparing our customized products to off-the-shelf products. To the extent such studies do not report favorably on our products, surgeons may be less likely to use our products. We are aware of only one clinical study, which was presented as an abstract at an industry conference and not in a peer-reviewed journal, conducted by a single surgeon and involving only 21 iTotal CR patients, in which our iTotal CR product performed less well than off-the-shelf knee replacement products. This study compared our iTotal CR product to posterior-stabilized and non-cemented rotating platform implants, but not cruciate-retaining implants, which we believe makes the comparison of questionable value. The measures on which our iTotal CR product performed less well than the off-the-shelf products were range of motion at six weeks (although our iTotal CR product performed equally well at minimum one year follow-up) and

17


Table of Contents

manipulation under anesthesia, or MUA, a procedure used post-operatively to adjust a knee replacement implant to improve its function. In a subsequent multi-center study of our iTotal CR product involving 197 patients for which we provided financial support, the 2.55% rate of MUA for our iTotal CR product was substantially lower than the 28.6% rate of MUA shown in this earlier and much smaller single-surgeon study. See "Business—Clinical studies" for additional information on this multi-center study. By comparison, the rate of MUA reported in a separate multi-center study of off-the-shelf implants was 4.6%.

        Moreover, overall patient satisfaction with our products, as observed by individual surgeons, will continue to be an important factor in surgeons' deciding to use our products for joint replacement procedures. The success of any particular joint replacement procedure, and a patient's satisfaction with the procedure, is dependent on the technique and execution of the procedure by the surgeon. Even if our iJigs and implants are manufactured exactly to specification, there is a risk that the surgeon makes a mistake during a procedure, leading to patient dissatisfaction with the procedure. In addition, following joint replacement procedures, fibrosis, scarring and other issues unrelated to the choice of implant product can lead to patient dissatisfaction. Furthermore, based on their prior experience using non-customized, off-the-shelf implant products, surgeons may be accustomed to making modifications to the implant components during a procedure. Because our products are already individually-made to fit the unique anatomy of each patient, modifications made to the implant components or the process of fitting the implant during the surgical procedure are not recommended and may result in negative surgical outcomes. If patients do not have a good outcome following procedures conducted using our products, surgeons' views of our products may be negatively impacted.

        The first step in the process for a patient to receive one of our joint replacement products involves a CT scan of the patient's affected joint and one or two CT images of other biomechanically relevant joints. CT scans involve the use of radiation to image the bone and other tissue in the scanned joint. Surgeons may be reluctant to recommend, and patients may be reluctant to undertake, a procedure that involves this imaging modality as a result of the actual or perceived risks of exposure to radiation as part of the CT scan. The use of an off-the-shelf joint replacement product generally does not require a CT scan. As a result, surgeons and patients may view the alternative joint replacement approaches that do not require a CT scan as more attractive. Competitors may promote their products on this basis, and as a result, our sales, revenue and profitability may be adversely affected.

Surgeons, hospitals and independent sales representatives and distributors may have existing or future relationships with other medical device companies that make it difficult for us to establish new or continued relationships with them; as a result, we may not be able to sell and market our products effectively.

        We believe that to sell and market our products effectively, we must establish relationships with key surgeons and hospitals and other medical facilities in the field of orthopedic surgery. Many of these key surgeons and hospitals and other medical facilities already have long-standing relationships with large, well-known companies that dominate the medical devices industry. Some of these relationships may be contractual, such as collaborative research programs or consulting relationships. Because of these existing relationships, surgeons and hospitals and other medical facilities may be reluctant or unable to adopt our products to the extent our products compete with, or have the potential to compete with, products supported by these existing relationships. Even if these surgeons and hospitals and other medical facilities purchase our products, they may be unwilling to provide us with follow up clinical and economic data important to our efforts to distinguish our products.

18


Table of Contents

        We also work with independent sales representatives and distributors to market, sell and support our products in the United States and international markets. If our independent sales representatives and distributors believe that a relationship with us is less beneficial than other relationships they may have with more established or well-known medical device companies, they may be unwilling to establish or continue their relationships with us, making it more difficult for us to sell and market our products effectively.

The success of our products is dependent on our ability to demonstrate their clinical benefits.

        To date, we have collected only limited clinical data supporting the favorable attributes of our iUni, iDuo and iTotal CR knee replacement products and no clinical data regarding our iTotal PS knee replacement product or iTotal Hip replacement product, which is currently in development. Our ongoing or future clinical studies may not yield the results that we expect to obtain and may not demonstrate that our products are superior to, or may demonstrate that our products are inferior to, off-the-shelf products with regard to clinical, functional or economic measures. Long-term device survivorship data for our products may show that the survivorship of our customized joint replacement products is shorter than that of off-the-shelf products. Competitors may initiate their own clinical studies which may yield data that is inconsistent with data from our studies or data showing the superiority of their products over our products.

The safety and efficacy of our products is supported by limited short- and long-term clinical data, and our products might therefore prove to be less safe and effective than initially thought.

        To date, we have obtained regulatory clearance for our products in the United States without conducting premarket clinical studies, and we do not believe that we will need premarket clinical data in order to obtain regulatory clearance in the United States for additional knee products or iTotal Hip. Additionally, to date, we have not been required to complete premarket clinical studies in connection with obtaining regulatory approval for the sale of our products outside the United States, and we do not believe that we will need premarket clinical data in order to obtain regulatory clearance in most jurisdictions outside the United States for additional knee products or iTotal Hip. However, to date, the regulatory agencies in the EU have required us to perform post-market clinical studies on our cleared products and may continue to do so with respect to our future products. As a result of the absence of premarket clinical studies, we currently lack the breadth of published long-term clinical data supporting the safety and efficacy of our products and the benefits they offer that might have been generated in connection with other approval processes. For these reasons, orthopedic surgeons may be slow to adopt our products, we may not have comparative data that our competitors have or are generating and we may be subject to greater regulatory and product liability risks. Further, future patient studies or clinical experience may indicate that treatment with our products does not improve patient outcomes. Such results would slow the adoption of our products by orthopedic surgeons, reduce our ability to achieve expected sales and could prevent us from achieving or sustaining profitability. Moreover, if future results and experience indicate that our products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to mandatory product recalls, suspension or withdrawal of FDA clearance or approval, loss of our ability to CE Mark our products, significant legal liability or harm to our business reputation.

19


Table of Contents

If we are unable to continue to develop new products and technologies in a timely manner, or if we develop new products and technologies that are not accepted by the market, the demand for our products may decrease or our products could become obsolete, and our revenue and profitability may decline.

        We are continually engaged in product development, research and improvement efforts. Our ability to grow sales depends on our capacity to keep up with existing or new products and technologies in the joint replacement product markets. If our competitors are able to develop and introduce new products and technologies before us, they may gain a competitive advantage and render our products and technologies obsolete. The additional markets into which we plan to expand our business are subject to similar competitive pressures and our ability to successfully compete in those markets will depend on our ability to develop and market new products and technologies in a timely manner, and in particular, on our ability to successfully commercially launch our new iTotal PS knee replacement product and complete development of, obtain regulatory clearance for and successfully commercially launch our planned iTotal Hip replacement product.

        We believe that offering a broad line of joint replacement products, including iTotal PS and iTotal Hip, is important to convincing surgeons to use our products generally. If we do not complete development of and obtain regulatory clearance for our iTotal Hip, or if market acceptance of iTotal PS or iTotal Hip is less than we expect, the growth in sales of our existing products may slow and our financial results would be adversely affected. The success of our product development efforts will depend on many factors, including our ability to:

        Moreover, research and development efforts may require a substantial investment of time and resources before we are adequately able to determine the commercial viability of a new product, technology or other innovation. Our competition may respond more quickly to new or emerging technologies, undertake more effective marketing campaigns, adopt more aggressive pricing policies, have greater financial, marketing and other resources than us or may be more successful in attracting potential customers, employees and strategic partners.

        Even in the event that we are able successfully to develop new products and technologies, they may not produce revenue in excess of the costs of development and may be quickly rendered obsolete as a result of changing customer preferences, changing demographics, slowing industry growth rates, declines in the knee or other orthopedic replacement implant markets, evolving surgical philosophies, evolving industry standards or the introduction by our competitors of products embodying new technologies or features. New materials, product designs and surgical techniques that we develop may not be accepted quickly, in some or all markets, because of, among other factors, entrenched patterns of clinical practice, the need for regulatory clearance and uncertainty with respect to third-party reimbursement of procedures that utilize our products.

20


Table of Contents

If surgeons, hospitals and other medical facilities are unable to obtain favorable reimbursement rates from third-party payors for procedures involving use of our products, or if reimbursement from third-party payors for such procedures significantly declines, surgeons, hospitals and other medical facilities may be reluctant to use our products and our sales may decline.

        In the United States, surgeons and hospitals and other medical facilities who purchase medical devices such as our products generally rely on third-party payors, principally federal Medicare, state Medicaid and private health insurance plans, to pay for all or a portion of the costs and fees associated with the joint replacement surgery and the products utilized in the procedure, including the cost of our products. Our customers' access to adequate coverage and reimbursement for the procedures performed using our products by government and third-party payors is central to the acceptance of our current and future products. Payors may view new products or products that have only recently been launched or with limited clinical data available, including the iTotal PS and iTotal Hip, as unproven or experimental, and on that basis may deny coverage of procedures involving use of our products. We may be unable to sell our products on a profitable basis if government and third-party payors deny coverage for such procedures or set reimbursement rates at unfavorable levels for procedures involving use of our products.

        To contain costs of new technologies, governmental healthcare programs and third-party payors are increasingly scrutinizing new and even existing treatments by requiring extensive evidence of favorable clinical outcomes and cost effectiveness. Surgeons, hospitals and other medical facilities may not purchase our products if they do not receive satisfactory reimbursement from these third-party payors for the cost of the procedures using our products. Payors continue to review their coverage policies carefully for existing and new therapies and can, without notice, deny coverage for treatments that include the use of our products. If third-party payors refuse coverage for these procedures or if we are not able to be reimbursed at cost-effective levels, this could have a material adverse effect on our business and operations.

        The first step in the process for a patient to receive one of our joint replacement products involves a CT scan of the patient's affected joint and one or two CT images of other biomechanically relevant joints. The cost of the CT scan is not always reimbursed by third-party payors. In addition, the costs of alternative imaging techniques that we could substitute for a CT scan in our iFit process, such as magnetic resonance imaging, or MRI, generally, are higher than the cost of a CT scan. If third-party payors do not reimburse the costs of the CT scan or any alternative imaging technique, we could find that we have to pay these costs ourselves, or reduce the prices of our products that we charge hospitals and other medical facilities that bear these costs, in order to maintain market acceptance of our products. In such event, our costs of sales would increase and our profitability would be adversely affected.

        The Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010 or, collectively, the PPACA, has changed how some healthcare providers are reimbursed by the Medicare program and some private third-party payors. As physicians consolidate into Accountable Care Organizations, or ACOs, these physicians, through the ACOs, are taking on the financial risk for providing care to all patients in their ACO. Medicare and some private third-party payors provide a set global, annual payment per beneficiary or member of the ACO. ACOs use these payments to provide care for their patients. When the cost of providing care is less than payments received, the ACO shares the savings with Medicare and the private third-party payors. ACOs are therefore incentivized to control and reduce the cost of patient care. Attempts to control and reduce the cost of care within an ACO could result in fewer referrals for elective surgery, or require the use of the least expensive implant available, either or both of which could cause our revenue to decline.

21


Table of Contents

        Outside of the United States, reimbursement systems vary significantly by country. Many foreign markets have government-managed healthcare systems that govern reimbursement for orthopedic implants and procedures. Many countries use a system of Diagnosis Related Groups to set a price for a particular medical procedure, including orthopedic implants that will be used in that procedure. In the EU, the pricing of medical devices is subject to governmental control, and pricing negotiations with governmental authorities can take considerable time after a device has been CE marked. To obtain reimbursement or pricing approval in some countries, we may be required to supply data that compares the cost-effectiveness of our products to other available therapies. Additionally, some foreign reimbursement systems provide for limited payments in a given period and therefore result in extended collection periods. Further, reimbursement rates for our products in other jurisdictions, including in Germany, where we have attained reimbursement rates at higher price points than some competitive products, could change negatively. If reimbursement of our products is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, it may not be profitable to sell our products outside of the United States, which would negatively affect the long-term growth of our business.

We are subject to cost-containment efforts of hospitals and other medical facilities and group purchasing organizations, which may have a material adverse effect on our financial condition, results of operations and cash flows.

        In order for surgeons to use our products, the hospitals and other medical facilities where these surgeons treat patients typically require us to enter into purchasing contracts. The process of negotiating a purchasing contract can be lengthy and time-consuming, require extensive management time and may not be successful. In addition, many of our customers and potential customers are members of group purchasing organizations that are focused on containing costs. Group purchasing organizations negotiate pricing arrangements with medical supply and device manufacturers, and these negotiated prices are made available to a group purchasing organization's affiliated hospitals and other medical facilities. If we do not have pricing agreements with group purchasing organizations, their affiliated hospitals and other medical facilities may be less likely to purchase our products. Our failure to complete purchasing contracts with hospitals or other medical facilities or contracts with group purchasing organizations may cause us to lose market share to our competitors and could have a material adverse effect on our sales, financial condition, results of operations and cash flows. Our competitors may also elect to lower their prices in select accounts, thereby rendering our products non-competitive on the basis of price, with resulting losses in sales to these accounts.

If we are unable to train orthopedic surgeons on the safe and appropriate use of our products, we may be unable to achieve our expected growth.

        An important part of our sales process includes training surgeons on the safe and appropriate use of our products. If we become unable to attract potential new surgeon customers to our training programs, or if we are unable to attract existing customers to training programs for future products, we may be unable to achieve our expected growth.

        There is a learning process involved for orthopedic surgeons to become proficient in the use of our products. It is critical to the success of our commercialization efforts to train a sufficient number of orthopedic surgeons and to provide them with adequate instruction in the use of our products. This training process may take longer than expected and may therefore affect our ability to increase sales. Following completion of training, we rely on the trained surgeons to advocate the benefits of our products in the broader marketplace. Convincing surgeons to dedicate the time and energy necessary for adequate training of themselves or other surgeons is challenging, and we may not be successful in these efforts. If surgeons are not properly trained, they may misuse or ineffectively use

22


Table of Contents

our products. This may also result in unsatisfactory patient outcomes, patient injury, negative publicity or lawsuits against us, any of which could have an adverse effect on our business.

        Although we believe our training methods for surgeons are conducted in compliance with FDA and other applicable regulations, if the FDA or other applicable government agency determines that our training constitutes promotion of an unapproved use or other inappropriate promotion, they could request that we modify our training or subject us to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure, civil fine and criminal penalty.

We rely on our direct sales force to sell our products in targeted geographic regions and any failure to maintain our direct sales force could harm our business.

        We rely on our direct sales force to market and sell our products in targeted geographic regions in the United States, Germany and the United Kingdom. We do not have any long-term employment contracts with the members of our direct sales force. The members of our direct sales force are highly trained and possess substantial technical expertise, and the loss of these personnel to competitors or otherwise could materially harm our business. If we are unable to retain our direct sales force personnel or replace them with individuals of equivalent technical expertise and qualifications, or if we are unable to successfully instill such technical expertise in replacement direct sales force personnel, our revenues and results of operations could be materially harmed.

If our relationships with independent sales representatives and distributors are not successful, our ability to market and sell our products would be harmed.

        We depend on relationships with independent sales representatives and distributors of orthopedic implants and instrumentation for the marketing and sales of our products in geographic regions that are not targeted by our direct sales force, including parts of the United States, Switzerland, Hong Kong and Singapore. Revenues generated from the sales of our products by independent sales representatives represented approximately 52% of our total revenue from sales of our products in the United States for the year ended December 31, 2014 and approximately 51% of our total revenue from sales of our products in the United States for the year ended December 31, 2013. We did not generate any revenue from sales of our products by independent sales representatives outside the United States in the years ended December 31, 2014 and December 31, 2013. Revenues generated from the sales of our products to distributors represented approximately 4% of our total revenue from sales of our products outside the United States for the year ended December 31, 2014 and approximately 5% of our total revenue from sales of our products outside the United States for the year ended December 31, 2013. We did not generate any revenue from sales of our products to distributors in the United States in the years ended December 31, 2014 and December 31, 2013. We have entered into agreements with these independent sales representatives and distributors; we have a limited ability, however, to influence the efforts of these independent sales representatives and distributors. Relying on independent sales representatives and distributors for our sales and marketing could harm our business for various reasons, including:

23


Table of Contents

        None of our independent sales representatives or distributors have been required to sell our products exclusively and many of them may freely sell the products of our competitors. We cannot be certain that they will prioritize selling our products over those of our competitors, and our competitors may enter into arrangements with our independent sales representatives and distributors that require them to cease distributing our products. If one or more of our independent sales representatives or any of our key distributors were to cease selling or distributing our products, our sales could be adversely affected. In such a situation, we may need to seek alternative relationships with independent sales representatives and distributors or increase our reliance on our other independent sales representatives or distributors or our direct sales force, which may not prevent our sales from being adversely affected. Additionally, to the extent that we enter into additional arrangements with independent sales representatives or distributors to perform sales, marketing or distribution services, the terms of the arrangements could cause our product margins to be lower than if we directly marketed and sold our products.

The current global economic uncertainties may adversely affect our results of operations.

        Our results of operations could be substantially affected by global economic conditions and local operating and economic conditions, which can vary substantially by market. Although the U.S. economy continues to recover from the worst recession in decades, unemployment and consumer confidence have not rebounded as quickly as in some prior recessions, resulting in reduced numbers of insured patients and the deferral of elective joint replacement procedures. Global economic conditions remain uncertain. Much of Europe remains in recession as the credit ratings of several European countries and the possibility that certain European Union member states will default on their debt obligations have contributed to significant uncertainty about the stability of global credit and financial markets. In addition, the Chinese economy has recently showed slowing growth, and economies of oil producing regions are weakening, in some cases rapidly and significantly as a result of volatility in the supply and price of oil. Challenges and pressures in the global economy may ultimately impact joint replacement procedure volumes, average selling prices and reimbursement rates from third-party payors, any of which could adversely affect our results of operations.

        Unfavorable economic conditions can depress sales in a given market and may result in actions that adversely affect our margins, constrain our operating flexibility or result in charges which are unusual or non-recurring. Certain macroeconomic events, such as the continuing adverse conditions in the global economy, the recent recessions in Europe, the eurozone crisis and the softening Chinese economy could have a more wide-ranging and prolonged impact on the general business environment, which could also adversely affect us. These economic developments could affect us in numerous ways, many of which we cannot predict. Among the potential effects could be:

        In addition, it is possible that further deteriorating economic conditions, and resulting U.S. federal budgetary concerns, could prompt the U.S. federal government to make significant changes in the Medicare program, which could adversely affect our results of operations. We are unable to

24


Table of Contents

predict the likely duration and severity of the current disruption in financial markets and adverse economic conditions, or the effects these disruptions and conditions could have on us.

Economic uncertainty may reduce patient demand for knee or other joint replacement procedures. If there is not sufficient patient demand for the procedures for which our products are used, customer demand for our products would likely drop, and our business, financial condition and results of operations would be harmed.

        The orthopedics industry in which we operate is vulnerable to economic trends. Joint replacement procedures are elective procedures, the cost of which may not be fully covered by or reimbursable through government, including Medicare or Medicaid, or private health insurance. In times of economic uncertainty or recession, individuals may reduce the amount of money that they spend on deferrable medical procedures, including joint replacement procedures. Economic downturns in the United States and international markets could have an adverse effect on demand for our products.

Our existing and any future indebtedness could adversely affect our ability to operate our business.

        As of March 31, 2015, we had $10.0 million of outstanding term loans under the SVB/Oxford Agreement and $0.7 million of outstanding term loans under our credit facility with the Massachusetts Development Finance Agency, referred to as the MDFA facility. We could in the future incur additional indebtedness under the SVB/Oxford Agreement, including, subject to an available borrowing base, under a committed $5.0 million revolving line of credit, referred to as the Revolving Line, and, upon meeting certain conditions, under a $10.0 million commitment for additional term loans, or additional indebtedness from other lenders. See "Management's Discussion and Analysis of Financial Condition and Results of Operations—Liquidity, capital resources and plan of operations—Credit facilities" for a description of our outstanding credit facilities.

        Our obligations under the SVB/Oxford Agreement and the MDFA facility will require us to dedicate a portion of our cash resources to the payment of interest and principal, reducing money available to fund working capital, capital expenditures, product development and other general corporate purposes. In addition, indebtedness under the Revolving Line bears interest at a variable rate, making us vulnerable to increases in the market rate of interest. If the market rate of interest increases substantially, we will have to pay additional interest on this indebtedness, which would reduce cash available for our other business needs.

        Our obligations under the SVB/Oxford Agreement are secured by a security interest over substantially all of our assets and the assets of our wholly owned subsidiary ImaTx, Inc., or ImaTx, other than intellectual property, with respect to which we and ImaTx granted a negative pledge. Moreover, the MDFA facility is secured by a lien over certain of our equipment. The security interests granted over our assets and the negative pledge with respect to our intellectual property could limit our ability to obtain additional debt financing. In addition, the SVB/Oxford Agreement and the documentation governing the MDFA facility contain negative covenants restricting our activities, including limitations on dispositions, mergers or acquisitions, incurring indebtedness or liens, paying dividends or making investments and certain other business transactions. Future debt securities or other financing arrangements could contain similar or more restrictive negative covenants.

        We may not have sufficient funds, and may be unable to arrange for additional financing, to pay the amounts due under our debt arrangements. Our obligations under the agreements governing our indebtedness are subject to acceleration upon the occurrence of specified events of default, including payment defaults or the occurrence of a material adverse change in our business,

25


Table of Contents

operations or financial or other condition. If an event of default occurs and the lenders accelerate the amounts due, we may not be able to make payments in the amount of obligations that were accelerated, and the lenders could seek to enforce security interests in the collateral securing such indebtedness.

        Our outstanding indebtedness combined with our other financial obligations and contractual commitments, including any additional indebtedness that we incur, could increase our vulnerability to adverse changes in general economic, industry and market conditions; limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we compete; and place us at a competitive disadvantage compared to our competitors that have less debt or better debt servicing options.

Our inability to maintain adequate working relationships with external research and development consultants and surgeons could have a negative impact on our ability to market and sell new products.

        We maintain professional working relationships with external research and development consultants and leading surgeons and medical personnel in hospitals and universities who assist in product research and development and training. We continue to emphasize the development of proprietary products and product improvements to complement and expand our existing product line. It is possible that U.S. federal and state laws requiring us to disclose payments or other transfers of value, such as free gifts or meals, to physicians and other healthcare providers could have a chilling effect on these relationships with individuals or entities that may, among other things, want to avoid public scrutiny of their financial relationships with us. In addition, consultants, surgeons and medical personnel in hospitals and universities may be subject to conflict of interest policies that limit our ability to engage these individuals as our advisors and in connection with future development and training efforts. If we are unable to establish and maintain our relationships with consultants, surgeons and medical personnel, our ability to develop and sell new and improved products could decrease, and our future operating results could be unfavorably affected.

Fluctuations in insurance cost and availability could adversely affect our profitability or our risk management profile.

        We hold a number of insurance policies, including product liability insurance, directors' and officers' liability insurance, business interruption insurance, property insurance and workers' compensation insurance. If the costs of maintaining adequate insurance coverage should increase significantly in the future, our operating results could be materially adversely affected. Likewise, if any of our current insurance coverage should become unavailable to us or become economically impractical, we would be required to operate our business without indemnity from commercial insurance providers.

Consolidation in the healthcare industry could lead to demands for price concessions or the exclusion of some suppliers from certain of our markets, which could have an adverse effect on our business, financial condition or operating results.

        Because healthcare costs have risen significantly over the past decade, numerous initiatives and reforms initiated by legislators, regulators and third-party payors to curb these costs have resulted in a consolidation trend in the healthcare industry to create new companies with greater market power, including hospitals. As the healthcare industry consolidates, competition to provide products and services to industry participants has become and will continue to become more intense. This in turn has resulted and likely will continue to result in greater pricing pressures and the exclusion of certain suppliers from important market segments as group purchasing organizations, independent delivery networks and large single accounts continue to use their market power to consolidate purchasing decisions for some of our customers. We expect that

26


Table of Contents

market demand, government regulation, third-party reimbursement policies and societal pressures will continue to change the worldwide healthcare industry, resulting in further business consolidations and alliances among our customers, which may reduce competition, exert further downward pressure on the prices of our products and may adversely impact our business, financial condition or operating results.

Risks related to our manufacturing

We may encounter problems or delays in the manufacturing of our products or fail to meet certain regulatory requirements that could result in a material adverse effect on our business and financial results.

        We manufacture a portion of our products at our facilities in Burlington, Bedford and Wilmington, Massachusetts. We are in the process of transitioning our manufacturing operations at our Burlington facility to our Wilmington facility and expect to complete this transition by August 2015, when we intend to vacate our Burlington facility. We may encounter delays as part of this transition and may have limited manufacturing capacity in the event that we are not able to complete the transition on a timely basis. Any limitation in our manufacturing capacity could adversely affect our results of operations.

        We plan to continue the build out of our manufacturing capabilities at our Wilmington facility using a portion of the net proceeds of this offering. All manufacturing processes in our Bedford, Burlington and Wilmington facilities require manufacturing validation and are subject to FDA inspections, as well as inspections by international regulatory agencies, including Notified Bodies for the European Union. We are in the process of validating our manufacturing processes for implant components and instrumentation manufactured at our new Wilmington facility. Delays in validation or FDA registration of our new facilities could impact our ability to grow our business in the future.

        Our current and planned future products are complex and require the integration of a number of separate components and processes. To become profitable, we must manufacture our products in increased quantities in compliance with regulatory requirements and at an acceptable cost. Increasing our capacity to manufacture our products on this scale will require us to introduce new manufacturing processes, including direct metal laser sintering, or DMLS, 3D printing of metal implant components and vertical integration of the manufacturing process by performing machining, polishing and other finishing services in-house, and to improve internal efficiencies. To date, we have not used 3D printing technology to manufacture commercially the metal implants that are used in our joint replacement systems. In addition, we have limited commercial manufacturing experience with respect to our iTotal PS knee and no commercial manufacturing experience yet with respect to our iTotal Hip replacement products.

        If we are unable to satisfy commercial demand for our products due to our inability to manufacture them in compliance with applicable laws and regulations, our business and financial results, including our ability to generate revenue, would be impaired, market acceptance of our products could be diminished and customers may instead purchase our competitors' products.

        We may encounter other difficulties in increasing and expanding our manufacturing capacity, including difficulties:

27


Table of Contents

        Moreover, any significant disruption of our manufacturing operations or damage to our facilities or stores of raw materials for any reason, such as fire or other events beyond our control, including as a result of natural disasters or terrorist attacks, could adversely affect our sales and customer relationships and therefore adversely affect our business.

Possible shortages of, or our inability to obtain, the necessary raw materials that we currently use and intend to use in the future, including in our 3D printing manufacturing processes, could limit our ability to operate and grow our business.

        We purchase raw materials, including polymer powders that currently are used, and metal powders we intend to use, in our 3D printing and manufacturing processes from a limited number of third-party suppliers. Because we rely on these few suppliers and generally maintain a forward inventory of these materials sufficient only for approximately six months of supply, there are a number of risks in our business, including:

        We currently depend on sole source suppliers for the supply of polymer and metal powders. These sole source suppliers may be unwilling or unable to supply the powders to us reliably, continuously and at the levels we anticipate or are required by the market. We may incur added costs or delays in identifying and qualifying replacement suppliers. In addition, because these suppliers supply large portions of the markets for these materials, there is competition for such supply. As a result of such competition, the prices for these supplies may increase and their availability to us may decrease.

        If any of our key suppliers were to decide to discontinue or limit the supply of a raw material that we use, the unanticipated change in the availability of supplies could cause delays in, or loss of, sales, increased production or related costs and damage to our reputation. In addition, because we use a limited number of suppliers, price increases by our suppliers may have an adverse effect on our results of operations, as we may be unable to find an alternative supplier who can supply us at a lower price. As a result, the loss of a limited source supplier could adversely affect our relationships with our customers and our results of operations and financial condition.

28


Table of Contents

We are dependent on third-party suppliers for important manufactured components included in our products, as well as for services that are essential to our manufacturing processes. The loss of any of these suppliers, or their inability to provide us with an adequate supply of components or to complete finishing or other manufacturing services, could limit our ability to operate and grow our business.

        We rely on third-party suppliers to manufacture all of the implant components, packaging materials, and instrumentation used in our joint replacement products that we do not currently manufacture ourselves. Currently, our in-house manufacturing is limited to our iJigs and the majority of the tibial components used in our implants. We outsource the manufacture of the remainder of the tibial components and femoral and other implant components to third-party suppliers. While we plan to establish additional internal manufacturing capabilities for our implant components, we also expect that we will continue to rely on third-party suppliers to manufacture and supply certain of our implant components. For us to be successful, these manufacturers must be able to provide us with these components in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable costs and, in particular, on a timely basis. Our anticipated growth could strain the ability of our suppliers to manufacture and deliver an increasingly large supply of implants and components. Manufacturers often experience difficulties in scaling up production, including problems with quality control and assurance.

        We generally purchase our outsourced implant components through purchase orders and do not have long-term contractual arrangements with any of our key suppliers. As a result, our suppliers have no obligation to manufacture for us or sell to us any given quantity of implant components. Without such contractual commitments, we could face difficulties in obtaining acceptance for our purchase orders, which could impair our ability to purchase adequate quantities of our implant components. If we are unable to obtain sufficient quantities of high-quality, individually-made components to meet demand on a timely basis, we could lose customers, our reputation may be harmed and our business would suffer. In addition, we currently depend on sole source suppliers for the supply of the reusable instrument trays and related logistics associated with our implant products. These sole source suppliers may be unwilling or unable to supply the trays and logistics services to us reliably, continuously and at the levels we anticipate or are required by the market.

We utilize a "just-in-time" manufacturing and delivery model, with minimal levels of inventories, which could leave us vulnerable to delays or shortages of key components or materials necessary for our products or delays in delivering our products. Any such shortages or delays could result in our inability to satisfy consumer demand for our products in a timely manner or at all, which could harm our reputation, future sales, profitability and financial condition.

        As all of our products are individually-made to fit an individual patient, we can assemble our products only after we receive orders from customers and must utilize "just-in-time" manufacturing processes. Supply lead times for components used in our products may vary significantly and depend upon a variety of factors, such as:

29


Table of Contents

        We generally maintain minimal inventory levels, except for inventories of raw materials used in our 3D printing and manufacturing processes. As a result, an unexpected shortage of supply of key components used to manufacture our products, or an unexpected and significant increase in the demand for our products, could lead to inadequate inventory and delays in shipping our products to customers. Any such delays could result in lost sales and harm to our relationships with surgeons, especially in the event of a missed surgery, which could in turn harm our profitability and financial condition.

        Moreover, our suppliers are dependent on commercial freight carriers to deliver implant components to our facilities, and we are dependent on commercial freight carriers to deliver our finished products to hospitals and surgeons. If the operations of these carriers are disrupted for any reason, we may be unable to deliver our products to our customers on a timely basis. If we cannot deliver our products in an efficient and timely manner, our customers may reduce their orders from us and our revenues and operating profits could materially decline. In a rising fuel cost environment, our and our suppliers' freight costs will increase. If freight costs materially increase and we are unable to pass that increase along to our customers for any reason or otherwise offset such increases in our cost of revenues, our gross margin and financial results could be adversely affected.

Our information technology systems are critical to our business. System management and implementation issues and system security risks could disrupt our operations, which could have a material adverse impact on our business and operating results.

        We rely on the efficient and uninterrupted operation of complex information technology systems. All information technology systems are vulnerable to damage or interruption from a variety of sources. As our business has grown in size and complexity, the growth has placed, and will continue to place, significant demands on our information technology systems.

        The iFit software applications we have developed for our existing products are critical for efficiently and correctly designing customized implants and iJigs. These applications require maintenance and further improvements in design automation in order to continue increasing productivity of the design process. If we fail to meet our goals for design automation and productivity, this may impact our ability to reduce production costs. Furthermore, bugs or errors in these complex iFit software applications could cause production delays or product defects, which may lead to customer dissatisfaction or possibly even product recalls.

        Our development of new products depends on our capability to adapt our iFit concepts and applications to new requirements. It may be more difficult than anticipated to make such adjustments, which could lead to delays or limitations in our ability to develop new, innovative products. Moreover, changes in privacy laws could increase the risk we are exposed to in managing patient data, and could limit some of the applications of that data in our business.

        In addition, experienced computer programmers and hackers may be able to penetrate our network security and misappropriate our confidential information or that of third parties, create system disruptions or cause shutdowns. The costs to eliminate or alleviate security problems or viruses could be significant, and the efforts to address these problems could result in interruptions that may have a material adverse impact on our operations, net revenues and operating results.

Risks related to our international operations

We are exposed to risks related to our international operations and failure to manage these risks may adversely affect our operating results and financial condition.

        We sell our products internationally in the United Kingdom, Germany, Austria, Ireland, Switzerland, Hong Kong and Singapore. We expect that our international activities will increase over

30


Table of Contents

the foreseeable future as we continue to pursue opportunities in international markets. During each of the years ended December 31, 2013 and 2014, approximately 29% of our revenue was attributable to our international customers, and as of December 31, 2014, approximately 6% of our employees were located outside the United States. For the three months ended March 31, 2015, approximately 30% of our revenue was attributable to our international customers, and as of March 31, 2015, approximately 6% of our employees were located outside the United States. The sale and shipment of our products across international borders, as well as the purchase of components and products from international sources, subjects us to extensive U.S., Canadian, EU and other foreign governmental trade, import and export and customs regulations and laws. Compliance with these regulations and laws is costly and exposes us to penalties for non-compliance. Therefore, we are subject to risks associated with having international operations. These international operations will require significant management attention and financial resources.

        International operations are subject to inherent risks, and our future results could be adversely affected by a number of factors, including:

Our international operations expose us to risks of fluctuations in foreign currency exchange rates.

        Our international operations expose us to risks of fluctuations in foreign currency exchange rates. To date, a significant portion of our international sales have been denominated in euros. We do not currently hedge any of our foreign currency exposure. As a result, a decline in the value of the euro against the U.S. dollar could have a material adverse effect on the gross margins and profitability of our international operations. In addition, sales to countries that do not utilize the euro could decline as the cost of our products to our customers in those countries increases or as the

31


Table of Contents

local currencies decrease. In addition, because our financial statements are denominated in U.S. dollars, a decline in the euro would negatively impact our overall revenue as reflected in our financial statements. To date, we have not used risk management techniques to hedge the risks associated with these fluctuations. Even if we were to implement hedging strategies, not every exposure can be hedged and, where hedges are put in place based on expected foreign currency exchange exposure, they are based on forecasts that may vary or that may later prove to have been inaccurate. As a result, fluctuations in foreign currency exchange rates or our failure to successfully hedge against these fluctuations could have a material adverse effect on our operating results and financial condition.

Risks related to managing our future growth

We expect to grow our organization, and as a result, we may encounter difficulties in managing our growth, which could disrupt our operations.

        We expect to experience significant growth in the number of our employees and the scope of our operations, particularly in the areas of research and development, manufacturing, manufacturing engineering, regulatory affairs, sales, marketing and distribution and general administration, some of whom we will require to have specific technical skills that are in high demand. Our management may need to divert a disproportionate amount of its attention away from our day-to-day activities to devote time to managing these growth activities. To manage these growth activities, we must continue to implement and improve our managerial, operational and financial systems, expand our facilities and continue to recruit and train additional qualified personnel. Due to our limited financial resources and the limited experience of our management team in managing a company with such anticipated growth, we may not be able to effectively manage the expansion of our operations or recruit and train additional qualified personnel. Our inability to effectively manage the expansion of our operations may result in weaknesses in our infrastructure, give rise to operational mistakes, loss of business opportunities, loss of employees and reduced productivity among remaining employees. Our expected growth could require significant capital expenditures and may divert financial resources from other projects, such as the development of additional products. If our management is unable to effectively manage our expected growth, our expenses may increase more than expected, our ability to generate revenues could be reduced, and we may not be able to implement our business strategy. In addition, we may consider further expanding our operations through potential acquisitions. Potential and completed acquisitions and strategic investments involve numerous risks, including diversion of management's attention from our core business, problems assimilating the purchased technologies or business operations and unanticipated costs and liabilities. Our future financial performance and our ability to commercialize products and compete effectively will depend, in part, on our ability to effectively manage any future growth, including growth through acquisitions.

Our future success depends on our ability to retain our Chief Executive Officer, Chief Technology Officer and other key executives and to attract, retain and motivate qualified personnel.

        We are highly dependent on the medical device industry expertise of Philipp Lang, M.D., our Chief Executive Officer, and Daniel Steines, M.D., our Chief Technology Officer, as well as the other principal members of our management, scientific and development teams. Although we have formal employment agreements with our executive officers, these agreements do not prevent them from terminating their employment with us at any time. In addition, we do not carry key-man insurance on any of our executive officers or employees and may not carry any key-man insurance in the future.

32


Table of Contents

        If we lose one or more of our executive officers, our ability to implement our business strategy successfully could be seriously harmed. Furthermore, replacing executive officers may be difficult and may take an extended period of time because of the limited number of individuals in our industry with the breadth of skills and experience required to develop, gain marketing approval of and commercialize products successfully. Competition to hire from this limited pool is intense, and we may be unable to hire, train, retain or motivate these additional key personnel on acceptable terms given the competition among numerous medical device companies for similar personnel. In addition, we rely on consultants and advisors, including scientific and clinical advisors, to assist us in formulating our research and development and commercialization strategy. Our consultants and advisors may be employed by employers other than us and may have commitments under consulting or advisory contracts with other entities that may limit their availability to us. If we are unable to continue to attract and retain high quality personnel, our ability to develop and commercialize product candidates will be limited.

Our management could have interests that conflict with our interests and the interests of our shareholders.

        We are party to revenue share agreements with certain past and present members of our scientific advisory board and our Chief Executive Officer that relate to these individuals' participation in the design and development of our products and related intellectual property. Compensation under these agreements for services rendered by these individuals includes a product revenue share. The existence of the revenue share arrangement may create a conflict of interest. For example, these advisors and our Chief Executive Officer may favor decisions that result in our making expenditures and allocating resources that increase revenue but do not result in profits or do not result in profits as great as other expenditures and allocations of resources would. Our Chief Executive Officer's equity interest, through his common stock and option ownership may, depending on the level of his equity interest and the level of our revenues, reduce this conflict. If any such decisions were made, however, our business could be harmed. For more information on the revenue share arrangements, see "Certain Relationships and Related-Persons Transactions—Revenue share agreement with Dr. Lang."

Risks related to our intellectual property and potential litigation

If we are unable to obtain, maintain or enforce sufficient intellectual property protection for our products and technologies, or if the scope of our intellectual property protection is not sufficiently broad, our competitive position could be harmed or we could be required to incur significant expenses to enforce our rights.

        We rely primarily on patent, copyright, trademark and trade secret laws, know-how and continuing technological innovation, as well as confidentiality and non-disclosure agreements and other methods, to protect the intellectual property related to our technologies and products. However, these legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage.

        We hold, or have in-licensed rights with respect to, patents and patent applications and have applied for additional patent protection relating to certain existing and proposed products and processes. While we generally apply for patents in those countries where we intend to make, have made, use or sell patented products, we may not accurately predict all of the countries where patent protection will ultimately be desirable. If we fail to timely file a patent application in any such country or fail to properly pursue an application through to the issuance of a patent, we may be precluded from doing so at a later date. Furthermore, our patent applications may not issue as patents. The rights granted to us under our patents, including prospective rights sought in our pending patent applications, may not be meaningful or provide us with any commercial advantage

33


Table of Contents

and they could be opposed, contested or circumvented by our competitors or could be declared invalid or unenforceable in judicial or in a wide variety of administrative proceedings including opposition, interference, re-examination, post-grant review, inter partes review, nullification and derivation proceedings. In such proceedings, third parties can raise objections against the initial grant of the patent. In the course of some such proceedings, which may continue for a protracted period of time, we may be compelled to limit the scope of the challenged claims, or may lose them altogether. In addition, our pending patent applications include claims to material aspects of our products and procedures that are not currently protected by issued patents. The process of applying for patent protection itself is time consuming and expensive. The failure of our patents to protect our products and technologies adequately might make it easier for our competitors to offer the same or similar products or technologies. Competitors may be able to design around our patents or develop products that provide outcomes that are comparable to ours without infringing on our intellectual property rights.

We may be involved in lawsuits to protect or enforce our intellectual property rights, which could be expensive, time consuming and unsuccessful.

        If a competitor infringes or otherwise violates one of our patents, the patents of our licensors, or our other intellectual property rights, enforcing those patents, trademarks and other rights may be difficult, time consuming or unsuccessful. In addition, in an infringement proceeding, a court may decide that a patent of ours is not valid or is unenforceable, in whole or part, or may refuse to stop the other party in such infringement proceeding from using the technology at issue on the grounds that our patents do not cover the technology in question. An adverse result in any litigation or defense proceedings could put one or more of our patents at risk of being invalidated, held unenforceable or interpreted narrowly, and could put any of our patent applications at risk of not yielding an issued patent. Even if successful, litigation to defend our patents and trademarks against challenges or to enforce our intellectual property rights could be expensive and time consuming and could divert management's attention from managing our business. Moreover, we may not have sufficient resources or desire to defend our patents or trademarks against challenges or to enforce our intellectual property rights.

If we are unable to protect the confidentiality of our trade secrets, the value of our technology could be materially adversely affected, and our business would be harmed.

        In addition to the protection afforded by patents, we rely on confidential proprietary information, including trade secrets, and know-how to develop and maintain our competitive position, especially with respect to our proprietary software used in the iFit Design and iFit Printing aspects of our technology platform. Any disclosure to or misappropriation by third parties of our confidential proprietary information could enable competitors to quickly duplicate or surpass our technological achievements, thus eroding our competitive position in our market. We seek to protect our confidential proprietary information, in part, by confidentiality agreements and invention assignment agreements with our employees, consultants, scientific advisors, contractors and collaborators. These agreements are designed to protect our proprietary information, however, we cannot be certain that such agreements have been entered into with all relevant parties, and we cannot be certain that our trade secrets and other confidential proprietary information will not be disclosed or that competitors will not otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. For example, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. We also seek to preserve the integrity and confidentiality of our confidential proprietary information by maintaining physical security of our premises and physical and electronic security of our information technology systems, but it is possible that these security measures could be breached. If any of our confidential proprietary

34


Table of Contents

information were to be lawfully obtained or independently developed by a competitor, we would have no right to prevent such competitor from using that technology or information to compete with us, which could harm our competitive position. Further, the laws of some foreign countries do not protect proprietary rights to the same extent or in the same manner as the laws of the United States. As a result, we may encounter significant problems in protecting and defending our intellectual property both in the United States and abroad. If we are unable to prevent material disclosure of the intellectual property related to our technologies to third parties, we will not be able to establish or maintain a competitive advantage in our market, which could materially adversely affect our business, results of operations and financial condition.

If we fail to comply with our obligations in the agreements under which we license intellectual property rights from third parties or otherwise experience disruptions to our business relationships with our licensors, we could be required to pay monetary damages or could lose license rights that are important to our business.

        We have entered into license agreements with third parties providing us with rights under various third-party patents and patent applications, including the rights to prosecute patent applications and to enforce patents. Certain of these license agreements impose and, for a variety of purposes, we may enter into additional licensing and funding arrangements with third parties that also may impose, diligence, development or commercialization timelines and milestone payment, royalty, insurance and other obligations on us. Under certain of our existing licensing agreements, we are obligated to pay royalties on net product sales of our products, pay a percentage of sublicensing revenues, make other specified payments relating to our products or pay license maintenance and other fees. We also have diligence and development obligations under certain of these agreements that we are required to satisfy. If we fail to comply with our obligations under our current or future license agreements, our counterparties may have the right to terminate these agreements, in which event we might not be able to develop, manufacture or market any product that is covered by the licenses provided for under these agreements or we may face claims for monetary damages or other penalties under these agreements. Such an occurrence could diminish the value of these products and our company. Termination of the licenses provided for under these agreements or reduction or elimination of our rights under these agreements may result in our having to negotiate new or reinstated agreements with less favorable terms, or cause us to lose our rights under these agreements, including our rights to important intellectual property or technology.

In the future, we may not be able to license additional intellectual property rights that we need for our business. If we are unable to do so, we may be unable to develop or commercialize the affected products, which could harm our business significantly.

        In the future, we may need to obtain additional licenses from others to expand our product lines, advance our technology or allow commercialization of our current or future products. It is possible that we may be unable to obtain additional licenses at a reasonable cost or on reasonable terms, if at all. In that event, we may be required to expend significant time and resources to redesign our products or the methods for manufacturing them or to develop or license replacement technology, all of which may not be feasible on a technical or commercial basis. If we are unable to do so, we may be unable to develop or commercialize the affected products, which could harm our business significantly. We cannot provide any assurances that third-party patents do not exist which might be enforced against our current manufacturing methods, products or future methods or products, resulting in either an injunction prohibiting our manufacture or sales, or, with respect to our sales, an obligation on our part to pay royalties or other forms of compensation to third parties.

35


Table of Contents

The medical device industry is characterized by frequent patent litigation, and we could become subject to litigation that could be costly, result in the diversion of management's time and efforts, require us to pay damages or prevent us from marketing our existing or future products.

        Our commercial success depends in part on not infringing the patents or violating the other proprietary rights of others and we may become party to, or threatened with, litigation or other adversarial proceedings regarding intellectual property rights with respect to our technology or products, including interference or derivation proceedings before the U.S. Patent and Trademark Office. Significant litigation regarding patent rights occurs in our industry. Our competitors in both the United States and abroad, many of which have substantially greater resources and have made substantial investments in patent portfolios and competing technologies, may have applied for or obtained or may in the future apply for and obtain, patents that may prevent, limit or otherwise interfere with our ability to make, use and sell our products. Our ability to defend ourselves or our third-party suppliers may be limited by our financial and human resources, the availability of reasonable defenses, and the ultimate acceptance of our defenses by the courts or juries. In addition, patent applications in the United States and elsewhere can be pending for many years before issuance, so there may be applications of others now pending of which we are unaware that may later result in issued patents that may prevent, limit or otherwise interfere with our ability to make, use or sell our products. The large number of patents, the rapid rate of new patent applications and issuances, the complexities of the technology involved and the uncertainty of litigation increase the risk of business assets and management's attention being diverted to patent litigation.

        We have received in the past, and may receive in the future, particularly as a public company, communications from various industry participants and patent holders alleging our infringement of their patents, trade secrets or other intellectual property rights or offering licenses to such intellectual property. We are aware of non-practicing entities that are seeking to exploit patents in the orthopedic area.

        Lawsuits resulting from allegations of infringement could, if successful, subject us to significant liability for damages and invalidate our proprietary rights. We have in the past settled allegations of infringement by entering into a settlement and license agreement and may need to do so again in the future. Any potential intellectual property litigation also could force us to do one or more of the following:

36


Table of Contents

        Any litigation or claim against us, even those without merit, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our core business and harm our reputation. Further, as the number of participants in the joint replacement industry grows, the possibility of intellectual property infringement claims against us increases. If we are found to infringe the intellectual property rights of third parties, we could be required to pay substantial damages, which may be increased up to three times of awarded damages, or substantial royalties and could be prevented from selling our products unless we obtain a license or are able to redesign our products to avoid infringement. Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our products in a way that would not infringe the intellectual property rights of others. If we fail to obtain any required licenses or make any necessary changes to our products or technologies, we may have to withdraw existing products from the market or may be unable to commercialize one or more of our products, all of which could have a material adverse effect on our business, results of operations and financial condition.

        In addition, any claims that we assert against perceived infringers could provoke these parties to assert counterclaims against us alleging that we infringe their intellectual property rights. As part of our intellectual property strategy, we plan to continue pursuing opportunities to assert our patents and intellectual property portfolio to secure agreements from other companies to pay royalties or make other payments to us with respect to their products that incorporate our technology. This activity could potentially bring unwanted attention to or scrutiny of our patent and intellectual property portfolio.

We may not be able to adequately protect our intellectual property rights throughout the world.

        Filing, prosecuting and defending patents on our products in all countries throughout the world would be prohibitively expensive. The requirements for patentability may differ in certain countries, particularly developing countries, and the breadth of patent claims allowed can be inconsistent. In addition, the laws of some foreign countries may not protect our intellectual property rights to the same extent as laws in the United States. Consequently, we will not be able to prevent third parties from practicing our inventions in all countries outside the United States. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and, further, may export otherwise infringing products to territories in which we have patent protection that may not be sufficient to enable us to terminate infringing activities.

        We do not have patent rights in certain foreign countries in which a market may exist. We have filed patent applications only in the United States and fewer than 18 other countries, many of which are in the European Union, and we therefore lack any patent protection in all other countries. In countries where we do not have significant patent protection, we are unlikely to stop a competitor from marketing products in such countries that are the same as or similar to our products. Moreover, in foreign jurisdictions where we do have patent rights, proceedings to enforce such rights could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly, and our patent applications at risk of not issuing. Additionally, such proceedings could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Thus, we may not be able to stop a competitor from marketing and selling in foreign countries products that are the same as or similar to our products, and our competitive position in the international market would be harmed.

37


Table of Contents

Changes in patent law could diminish the value of patents in general, thereby impairing our ability to protect our existing and future products.

        Recent patent reform legislation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents. On September 16, 2011, the Leahy-Smith America Invents Act, or the Leahy-Smith Act, was signed into law. The Leahy-Smith Act includes a number of significant changes to U.S. patent law. These include provisions that affect the way patent applications are prosecuted, redefine prior art, may affect patent litigation, and switched the United States patent system from a "first-to-invent" system to a "first-to-file" system. Under a "first-to-file" system, assuming the other requirements for patentability are met, the first inventor to file a patent application generally will be entitled to the patent on an invention regardless of whether another inventor had made the invention earlier. The United States Patent and Trademark Office recently developed new regulations and procedures to govern administration of the Leahy-Smith Act, and many of the substantive changes to patent law associated with the Leahy-Smith Act, in particular, the first-to-file provisions, only became effective on March 16, 2013. Accordingly, it is not clear what, if any, impact the Leahy-Smith Act will have on the operation of our business. The Leahy-Smith Act and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents, all of which could have a material adverse effect on our business and financial condition.

        In addition, patent reform legislation may pass in the future that could lead to additional uncertainties and increased costs surrounding the prosecution, enforcement and defense of our patents and applications. Furthermore, the U.S. Supreme Court and the U.S. Court of Appeals for the Federal Circuit have made, and will likely continue to make, changes in how the patent laws of the United States are interpreted. Similarly, foreign courts have made, and will likely continue to make, changes in how the patent laws in their respective jurisdictions are interpreted. We cannot predict future changes in the interpretation of patent laws or changes to patent laws that might be enacted into law by United States and foreign legislative bodies. Those changes may materially affect our patents or patent applications and our ability to obtain additional patent protection in the future.

If product liability lawsuits are brought against us, our business may be harmed, and we may be required to pay damages that exceed our insurance coverage.

        Our business exposes us to potential product liability claims that are inherent in the testing, manufacture and sale of medical devices for knee and hip replacement procedures. Knee replacement surgery involves significant risk of serious complications, including bleeding, infection, instability, dislocation, nerve injury and death. Hip replacement surgery involves significant risk of serious complications including bleeding, infection, dislocation, leg length discrepancy, nerve injury and death. In addition, joint replacement surgery involves product risks, including failures over time due to polyethylene wear and aseptic loosening, which is a condition caused by wear debris generated by the implant. We or our suppliers could suffer breaches to our sterilization procedures, which could cause contamination of the affected components and products we market and ultimately could cause infections in patients. Moreover, patients may be dissatisfied with the results of joint replacement surgery even if there is no medical complication. Furthermore, if orthopedic surgeons are not sufficiently trained in the use of our products, they may misuse or ineffectively use our products, which may result in unsatisfactory patient outcomes or patient injury. We could become the subject of product liability lawsuits alleging that component failures, malfunctions, manufacturing flaws, design defects or inadequate disclosure of product-related risks or product-related information resulted in an unsafe condition or injury to patients.

38


Table of Contents

        We have had product liability claims relating to our products asserted against us in the past, and some product liability claims currently are outstanding. No claim to date either individually, or in the aggregate, has resulted, in a material negative impact on our business. In light of the nature of our business, it is likely we will continue to be subject to product liability claims in the future, some of which could have a negative impact on our business.

        Regardless of the merit or eventual outcome, product liability claims may result in:

        Our existing product liability insurance coverage may be inadequate to protect us from any liabilities we might incur. If a product liability claim or series of claims is brought against us for uninsured liabilities or in excess of our insurance coverage, our business could suffer. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates or the inability to secure coverage in the future. In addition, a recall of some of our products, whether or not the result of a product liability claim, could result in significant costs and loss of customers.

        In addition, we may not be able to maintain insurance coverage at a reasonable cost or in sufficient amounts or scope to protect us against losses. Any claims against us, regardless of their merit, could severely harm our financial condition, strain our management and other resources and adversely affect or eliminate the prospects for commercialization or sales of a product or product candidate that is the subject of any such claim.

Risks related to regulatory approval

Our medical device products are subject to extensive governmental regulation both in the United States and abroad, and our failure to comply with applicable requirements could cause our business to suffer.

        Our products are classified as medical devices and are subject to extensive regulation by the FDA and other federal, state and foreign governmental authorities. These regulations relate to manufacturing, labeling, sale, promotion, distribution, importing and exporting and shipping of our products. If we fail to comply with applicable laws and regulations it could jeopardize our ability to sell our products and result in enforcement actions such as:

39


Table of Contents

        Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, results of operations and financial condition.

The regulations to which we are subject are complex and have tended to become more stringent over time, making obtaining clearances and maintaining compliance increasingly difficult.

        Before we can market or sell a new regulated product or a significant modification to an existing product in the United States, we must obtain either clearance from the FDA through the filing of a 510(k) premarket notification or approval from the FDA pursuant to a premarket approval application, or PMA, unless the device is specifically exempt from premarket review. The clearance or approval that is required will depend upon how the product is classified by the FDA. The FDA classifies medical devices into one of three classes. Devices deemed to pose low to moderate risk are placed in either Class I or II, which, absent an exemption, requires the manufacturer to submit to the FDA a premarket notification requesting permission for commercial distribution, which is known as 510(k) clearance. Class III devices, such as life-sustaining or life-supporting devices or devices that are of substantial importance in preventing impairment of human health or which present a potential unreasonable risk of illness or injury, require approval of a PMA application to provide reasonable assurance of safety and effectiveness.

        In the 510(k) clearance process, the FDA must determine that a proposed device is "substantially equivalent" to a device legally on the market, known as a "predicate" device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. Clinical data is sometimes required to support substantial equivalence. In the PMA approval process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including technical, pre-clinical, clinical trial, manufacturing and labeling data.

        In order to obtain a PMA and, in some cases, a 510(k) clearance, a product sponsor must conduct well controlled clinical trials designed to test the safety and effectiveness of the product. To date, we have not been required to conduct clinical studies or to obtain clinical data in order to obtain 510(k) clearance in the United States for our products. Additionally, to date, we have not been required to complete clinical studies in connection with obtaining regulatory approval for the sale of our products outside the United States. Conducting clinical trials generally entails a long, expensive and uncertain process that is subject to delays and failure at any stage. The data obtained from clinical trials may be inadequate to support approval or clearance of a submission. In addition, the occurrence of unexpected findings in connection with clinical trials may prevent or

40


Table of Contents

delay obtaining approval or clearance. If we conduct clinical trials, they may be delayed or halted or may be inadequate to support approval or clearance, for numerous reasons, including:

        The FDA's 510(k) clearance process for each device or modification usually takes from three to 12 months, but may last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is submitted to the FDA until an approval is obtained.

        In the United States, all of our FDA-cleared products have been cleared without the use of a PMA under the 510(k) clearance process. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, our product introductions or modifications could be delayed or canceled, which could cause our sales to decline. The FDA may demand that we obtain a PMA prior to marketing certain of our future products. In addition, if the FDA disagrees with our determination that a product we currently market is eligible for clearance under the premarket notification process of Section 510(k) of the FDCA, the FDA may require us to submit a PMA in order to continue marketing the product. Further, even with respect to those future products where a PMA is not required, we may not be able to obtain the 510(k) clearances with respect to those products.

        To date, we have used the CE Marking process to satisfy the conformity standards required to market and sell our joint replacement products in the EU. In the CE Marking process, a medical device manufacturer must carry out a clinical evaluation of its medical device to demonstrate conformity with the relevant Essential Requirements. This clinical evaluation is part of the product's technical file. A clinical evaluation includes an assessment of whether a medical device's performance is in accordance with its intended use, that the known and foreseeable risks linked to the use of the device under normal conditions are minimized and acceptable when weighed against the benefits of its intended purpose. The clinical evaluation conducted by the manufacturer must also address any clinical claims, the adequacy of the device labeling and information (particularly claims, contraindications, precautions and warnings) and the suitability of related instructions for use. This assessment must be based on clinical data, which can be obtained from clinical studies

41


Table of Contents

conducted on the device being assessed, scientific literature from similar devices whose equivalence with the assessed device can be demonstrated or both clinical studies and scientific literature. With respect to implantable devices or devices classified as Class III in the EU, the manufacturer must conduct clinical studies to obtain the required clinical data, unless reliance on existing clinical data from similar devices can be justified.

        As part of the conformity assessment process, depending on the type of device, an entity authorized to conduct the conformity assessment, which is referred to as a Notified Body, will review the manufacturer's clinical evaluation process, assess the clinical evaluation data of a representative sample of the device's subcategory or generic group, or assess all the clinical evaluation data, verify the manufacturer's assessment of that data and assess the validity of the clinical evaluation report and the conclusions drawn by the manufacturer. The conduct of clinical studies to obtain clinical data that might be required as part of the described clinical evaluation process can be expensive and time-consuming. To date, we have not been required to conduct any of these clinical studies to obtain clinical data as part of the clinical evaluation process.

        Any delay in, or failure to receive or maintain, clearance or approval for our products under development could prevent us from generating revenue from these products or achieving profitability. Additionally, the FDA and other regulatory authorities have broad enforcement powers. Regulatory enforcement or inquiries, or other increased scrutiny on us, could dissuade some surgeons from using our products and adversely affect our reputation and the perceived safety and efficacy of our products.

        Even after we have obtained the proper regulatory clearance or approval to market a product, the FDA has the power to require us to conduct postmarketing studies. For example, as a condition of approval, we could be required to conduct a post-approval study, as well as an enhanced surveillance study. Failure to conduct required studies in a timely manner could result in the revocation of the 510(k) clearance or PMA approval for the product that is subject to such a requirement and could also result in the recall or withdrawal of the product, which would prevent us from generating sales from that product in the United States.

        Even after we receive a CE Certificate of Conformity enabling us to affix the CE Mark to a product and to sell our product in the EEA, a Notified Body or a competent authority may require post-marketing studies of our product. Failure to comply with such requirements in a timely manner could result in the withdrawal of our CE Certificate of Conformity and the recall or withdrawal of our product from the market in the European Union, which would prevent us from generating revenue from sales of that product in the EEA. Moreover, each CE Certificate of Conformity is valid for a maximum of five years, but more commonly three years. Our CE Certificates of Conformity are valid through August 5, 2016 for our iTotal CR product, February 12, 2017 for our iUni product, June 11, 2019 for our iDuo product and March 5, 2020 for our iTotal PS product. At the end of each period of validity we are required to apply to the Notified Body for a renewal of the CE Certificate of Conformity. There may be delays in the renewal of the CE Certificate of Conformity or the Notified Body may require modifications to our products or to the related technical files before it agrees to issue the new CE Certificate of Conformity.

Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales.

        The FDA or the EU may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions that may prevent or delay approval or clearance of our products under development or may impact our ability to modify our currently approved or cleared products on a timely basis. For example, as part of the Food and Drug Administration Safety and Innovation Act of 2012, or the FDASIA, the U.S. Congress enacted

42


Table of Contents

several reforms entitled the Medical Device Regulatory Improvements and additional miscellaneous provisions which will further affect medical device regulation both pre- and post-approval. Any change in the laws or regulations that govern the clearance and approval processes relating to our current and future products could make it more difficult and costly to obtain clearance or approval for new products, or to produce, market and distribute existing products. Similarly, the EU may reclassify any of our Class II products as Class III in the EU. In either such event, the process for attaining regulatory approval of our products would be more difficult and costly and would take additional time compared to the regulatory clearance processes that have been applicable to our products to date.

        The FDA could also reclassify some or all of our products that are currently classified as Class II to Class III requiring additional controls, clinical studies and submission of a PMA for us to continue marketing and selling those products. Under new changes instituted by the FDASIA, the FDA may now change the classification of a medical device by administrative order instead of by regulation. Although the revised process is simpler, the FDA must still publish a proposed order in the Federal Register, hold a device classification panel meeting and consider comments from affected stakeholders before issuing the reclassification order. The FDA may reclassify any of our Class II devices into Class III and require us to submit a PMA for FDA review and approval of the safety and effectiveness of our products.

Modifications to our currently FDA-cleared products or the introduction of new products may require new regulatory clearances or approvals or require us to recall or cease marketing our current products until clearances or approvals are obtained.

        Modifications to our products may require new regulatory approvals or clearances or require us to recall or cease marketing the modified products until these clearances or approvals are obtained. Any modification to one of our 510(k)-cleared products that would constitute a major change in its intended use or any change that could significantly affect the safety or effectiveness of the device would require us to obtain a new 510(k) marketing clearance and may even, in some circumstances, require the submission of a PMA if the change raises complex or novel scientific issues or the product has a new intended use. We may be required to submit extensive pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or premarket approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and operating results.

        The FDA requires every manufacturer to make the determination regarding the need for a new 510(k) submission in the first instance, but the FDA may review any manufacturer's decision. We have modified some of our 510(k) cleared products, and have determined based on our review of the applicable FDA guidance that in certain instances the changes did not require new 510(k) clearances or PMA approval. If the FDA disagrees with our determination and requires us to seek new 510(k) clearances or PMA approval for modifications to our previously cleared products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or distribution of our products or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties.

        Furthermore, potential changes to the 510(k) program may make it more difficult for us to make modifications to our previously cleared products, by either imposing more strict requirements on when a new 510(k) clearance for a modification to a previously cleared product must be submitted or applying more onerous review criteria to such submissions. In July and December 2011, the FDA issued draft guidance documents addressing when to submit a new 510(k) clearance due to modifications to 510(k)-cleared products and the criteria for evaluating substantial equivalence. The

43


Table of Contents

July 2011 draft guidance document was ultimately withdrawn as the result of the passage of the FDASIA. As a result, the FDA's original guidance document regarding 510(k) modifications, which dates back to 1997, remains in place. It is uncertain when the FDA will seek to issue new guidance on product modifications. Any efforts to do so could result in a more rigorous review process and make it more difficult to obtain clearance for device modifications.

The FDA may not grant 510(k) clearance or PMA approval of our future products, and failure to obtain necessary clearances or approvals for our future products would adversely affect our ability to grow our business.

        Any future products that we develop, including our iTotal Hip replacement products, will require FDA clearance of a 510(k) or FDA approval of a PMA. The FDA may not approve or clear these products for the indications that are necessary or desirable for successful commercialization. Indeed, the FDA may refuse our requests for 510(k) clearance or premarket approval of new products.

        In December 2012 the FDA issued guidance documents intended to explain the procedures and criteria the FDA will use in assessing whether a 510(k) submission meets a minimum threshold of acceptability and should be accepted for substantive review. Under the "Refuse to Accept" guidance, the FDA conducts an early review against specific acceptance criteria to inform 510(k) and PMA submitters if the submission is administratively complete, or if not, to identify the missing element(s). Submitters are given the opportunity to provide the FDA with the identified information. If the information is not provided within a defined time, the submission will not be accepted for FDA review. Significant delays in receiving clearance or approval, or the failure to receive clearance or approval for our new products would have an adverse effect on our ability to expand our business.

Our cleared and approved products are, and any future products will be, subject to post-marketing restrictions, and we may be subject to substantial penalties if we fail to comply with all applicable regulatory requirements.

        The products for which we have obtained regulatory clearance or approval are, and any of our future products will be, along with the manufacturing processes, post-approval clinical data, labeling, advertising and promotional activities for such products, subject to continual requirements of and review by the FDA and other regulatory authorities. These requirements include submissions of safety and other post-marketing information and reports, registration and listing requirements, Quality System regulations relating to manufacturing, quality control and quality assurance and corresponding maintenance of records and documents. If we receive regulatory clearance or approval of additional products in the future, the clearance or approval may be subject to limitations on the indicated uses for which the product may be marketed or to the conditions of clearance or approval, and the accompanying label may limit the approved use of our product, which could limit sales of the product.

        The FDA may also impose requirements for costly post-marketing studies or clinical trials and surveillance to monitor the safety or efficacy of a product. The FDA and other agencies, including the Department of Justice, or DOJ, closely regulate the manufacturing, marketing and promotion of medical devices. Violations of the FDCA and other statutes, including the False Claims Act, may lead to investigations alleging violations of federal and state health care fraud and abuse laws, as well as state consumer protection laws. In addition, later discovery of previously unknown safety issues or other problems with our products, manufacturers or manufacturing processes, or failure to comply with regulatory requirements, may result in:

44


Table of Contents

We may fail to obtain or maintain foreign regulatory approvals to market our products in other countries.

        To market and sell our products in countries outside the United States, we must seek and obtain regulatory approvals, certifications or registrations and comply with the laws and regulations of those countries. These laws and regulations, including the requirements for approvals, certifications or registrations and the time required for regulatory review, vary from country to country. Obtaining and maintaining foreign regulatory approvals, certifications or registrations are expensive and we cannot be certain that we will maintain or receive regulatory approvals, certifications or registrations in any foreign country in which we currently market or plan to market our products.

        The regulatory approval process outside the United States generally includes all of the risks associated with obtaining FDA approval. In addition, in many countries outside the United States, the product must be approved for reimbursement before the product can be approved for sale in that country. We may not obtain approvals from regulatory authorities outside the United States on a timely basis, if at all. Approval by the FDA does not ensure approval by regulatory authorities in other countries or jurisdictions, and approval by one regulatory authority outside the United States does not ensure approval by regulatory authorities in other countries or jurisdictions or by the FDA. If we fail to obtain or maintain regulatory approvals, certifications or registrations in any foreign country in which we currently market or plan to market our products, our ability to generate revenue will be harmed.

If we or our suppliers fail to comply with ongoing FDA, EU or other foreign regulatory authority requirements, or if we experience unanticipated problems with our products, these products could be subject to restrictions or withdrawal from the market.

        Any product for which we obtain clearance or approval, and the manufacturing processes, reporting requirements, post-approval clinical data and promotional activities for such product, will be subject to continued regulatory review, oversight and periodic inspections by the FDA and other

45


Table of Contents

domestic and foreign regulatory bodies. In particular, we and our third-party suppliers are required to comply with the FDA's Quality System Regulation, or QSR, and the applicable regulatory requirements in the EU on product assessments and quality system assessments. In the EU, compliance with harmonized standards prepared under a mandate from the European Commission and referenced in the Official Journal of the EU, or harmonized standards, serve as a presumption of conformity with the relevant Essential Requirements under the Medical Devices Directive 93/42/EEC, as amended. These FDA regulations and EU standards cover the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of our products and expected future products. Compliance with applicable regulatory requirements is subject to continual review and is monitored rigorously through periodic inspections by the FDA. Compliance with harmonized standards in the EU is also subject to regular review through the conduct of inspection by Notified Bodies or other regulatory bodies. In September 2013, the European Commission issued a new recommendation on audits and assessments performed by Notified Bodies in the field of medical devices. According to this recommendation, Notified Bodies have to perform unannounced audits to verify continuous compliance with applicable legal obligations under Directive 93/42/EEC. We must permit and allow unimpeded access for Notified Body staff to conduct unannounced audits in order to maintain our CE Certificate of Conformity. If we, or our manufacturers, fail to adhere to QSR requirements in the United States or regulatory requirements in the EU, this could delay production of our products and lead to fines, difficulties in obtaining regulatory clearances or CE Certificate of Conformity, recalls, enforcement actions, including injunctive relief or consent decrees, or other consequences, which could, in turn, have a material adverse effect on our financial condition or results of operations.

        The FDA audits compliance with the QSR through periodic announced and unannounced inspections of manufacturing and other facilities. The FDA inspected our Bedford, Massachusetts facility and quality system in June 2015. While all of our previous inspections have resulted in no significant observations, we cannot provide assurance that we can maintain a comparable level of regulatory compliance in the future at our facilities or that future inspections will have the same result.

        The British Standards Institute, or BSI, an independent global notified body, conducts annual assessments of our quality management system in order to confirm that our quality management system complies with the requirements of ISO13485 in all material respects and periodic full recertification audits of our quality management system in order to confirm that we comply with the requirements of the Medical Devices Directive 93/42/EEC. Our last full recertification audit was completed in February 2015. We expect that BSI will continue to conduct annual audits, or unannounced audits, to assess our compliance with the applicable EU requirements.

        The failure by us or one of our suppliers to comply with applicable statutes and regulations administered by the FDA, or applicable regulatory requirements in the EU, or the failure to timely and adequately respond to any adverse inspectional observations, nonconformances or product safety issues, could result in any of the enforcement actions or sanctions described above under the risk factor captioned "—Our medical device products are subject to extensive governmental regulation both in the United States and abroad, and our failure to comply with applicable requirements could cause our business to suffer." Any of these sanctions could have a material adverse effect on our reputation, business, results of operations and financial condition. Furthermore, our key third-party manufacturers may not currently be or may not continue to be in compliance with all applicable regulatory requirements, which could result in our failure to produce our products on a timely basis and in the required quantities, if at all.

46


Table of Contents

If our products, or malfunction of our products, cause or contribute to a death or a serious injury, we will be subject to medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions.

        Under the FDA medical device report, or MDR, regulations, medical device manufacturers are required to report to the FDA information that a device has or may have caused or contributed to a death or serious injury or has malfunctioned in a way that would likely cause or contribute to death or serious injury if the malfunction of the device or one of our similar devices were to recur. The decision to file an MDR involves a judgment by us as the manufacturer. We have made decisions that certain types of events are not reportable on an MDR; however, there can be no assurance that the FDA will agree with our decisions. If we fail to report MDRs to the FDA within the required timeframes, or at all, or if the FDA disagrees with any of our determinations regarding the reportability of certain events, the FDA could take enforcement actions against us, which could have an adverse impact on our reputation and financial results.

        Additionally, all manufacturers placing medical devices in the market in the EU are legally bound to report any serious or potentially serious incidents involving devices they produce or sell to the competent authority in whose jurisdiction the incident occurred. In the EU, we must comply with the EU Medical Device Vigilance System. Under this system, incidents must be reported to the relevant National Competent Authorities of the EU countries, and manufacturers are required to take Field Safety Corrective Actions, or FSCAs, to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. An incident is defined as any malfunction or deterioration in the characteristics or performance of a device, as well as any inadequacy in the labeling or the instructions for use which, directly or indirectly, might lead to or might have led to the death of a patient or user or of other persons or to a serious deterioration in their state of health. An FSCA may include the recall, modification, exchange, destruction or retrofitting of the device. FSCAs must be communicated by the manufacturer or its European Authorized Representative to its customers and to the end users of the device through Field Safety Notices.

        Any such adverse event involving our products could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection or enforcement action. Adverse events involving our products have been reported to us in the past, and similar adverse events may occur in the future. Any corrective action, whether voluntary or involuntary, will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.

In the future, our products may be subject to product recalls either voluntarily or at the direction of the FDA or another governmental authority that could have a significant adverse impact on us.

        The FDA and similar foreign governmental authorities have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture. The authority to require a recall must be based on an FDA finding that there is reasonable probability that the device would cause serious injury or death. In addition, foreign governmental bodies have the authority to require the recall of our products in the event of material deficiencies or defects in design or manufacture. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found. We have experienced limited recalls in the past, related to manufacturing defects, labeling updates and packaging inconsistencies. The FDA requires that certain classifications of recalls be reported to the FDA within 10 working days after the recall is initiated. A government-mandated or voluntary recall by us or one of our international distributors could occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing errors, design or labeling defects or other deficiencies and issues. We

47


Table of Contents

are also required to follow detailed recordkeeping requirements for all company-initiated medical device corrections and removals and to report such corrective and removal actions to the FDA if they are carried out in response to a risk to health and have not otherwise been reported under the MDR regulations. We may initiate voluntary recalls involving our products in the future that we determine do not require notification to the FDA. If the FDA disagrees with our determinations, they could require us to report those actions as recalls. A future recall announcement could harm our reputation with customers and negatively affect our sales. In addition, the FDA could take enforcement action for failing to report the recalls when they were conducted.

        In addition, in October 2014, the FDA issued guidance intended to assist the FDA and medical device industry in distinguishing medical device recalls from device enhancements. Per the guidance, if any change or group of changes to a device addresses a violation of the FDCA, that change would generally constitute a medical device recall and not simply a product enhancement and would require submission of a recall report to the FDA.

        Recalls of any of our products would divert managerial and financial resources and have an adverse effect on our reputation, results of operations and financial condition, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers' demands. We may also be subject to liability claims or may be required to bear other costs or to take other actions that may have a negative impact on our future sales and our ability to generate profits.

We may be subject to enforcement action if we engage in improper marketing or promotion of our products.

        Our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition of the promotion of unapproved, or off-label, use. Use of a device outside its cleared or approved indications is known as "off-label" use. We believe that the specific surgical procedures for which our products are marketed fall within the scope of the surgical applications that have been cleared by the FDA. However, physicians may use our products off-label, as the FDA does not restrict or regulate a physician's choice of treatment within the practice of medicine. If the FDA determines that our promotional materials or other product labeling constitute promotion of an unapproved, or off-label use, it could request that we modify our materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fine or criminal penalties.

        Other federal, state and foreign regulatory agencies, including the U.S. Federal Trade Commission, have issued guidelines and regulations that govern how we promote our products, including how we use endorsements and testimonials. If our promotional materials are inconsistent with these guidelines or regulations, we could be subject to enforcement actions, which could result in significant fines, costs and penalties. Our reputation could also be damaged and the adoption of our products could be impaired. In addition, the off-label use of our products may increase the risk of product liability claims. Product liability claims are expensive to defend and could divert our management's attention, result in substantial damage awards against us and harm our reputation.

        In the EU, our medical devices may be promoted only for the intended purpose for which the devices have been CE Marked. Failure to comply with this requirement could lead to the imposition of penalties by the competent authorities of the EU Member States. The penalties could include warnings, orders to discontinue the promotion of the medical device, seizure of the promotional materials and fines. Our promotional materials must also comply with various laws and codes of conduct developed by medical device industry bodies in the EU governing promotional claims, comparative advertising, advertising of medical devices reimbursed by the national health insurance systems and advertising to the general public. If our promotional materials do not comply with

48


Table of Contents

these laws and industry codes we could be subject to penalties that could include significant fines. Our reputation could also be damaged and the adoption of our products could be impaired.

Legislative or regulatory healthcare reforms may make it more difficult and costly for us to obtain regulatory clearance or approval of our products and to produce, market and distribute our products after clearance or approval is obtained.

        Recent political, economic and regulatory influences are subjecting the healthcare industry to fundamental changes. The sales of our products depend in part on the availability of coverage and reimbursement from third-party payors such as government health programs, private health insurers, health maintenance organizations and other healthcare-related organizations. Both the federal and state governments in the United States and foreign governments continue to propose and pass new legislation and regulations designed to contain or reduce the cost of healthcare. Such legislation and regulations may result in decreased reimbursement for medical devices or the procedures in which they are used, which may further exacerbate industry-wide pressure to reduce the prices charged for medical devices. This could harm our ability to market our products, generate sales and become or remain profitable.

        In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of our products. Delays in receipt of, or failure to receive, regulatory clearances or approvals for our new products would have a material adverse effect on our business, results of operations and financial condition.

        Federal and state governments in the United States have recently enacted legislation to overhaul the nation's healthcare system. While the goal of healthcare reform is to expand coverage to more individuals, it also involves increased governmental price controls, additional regulatory mandates and other measures designed to constrain medical costs. The Patient Protection and Affordable Care Act significantly impacts the medical device industry. Among other things, the PPACA:

        In addition, other legislative changes have been proposed and adopted since the PPACA was enacted. On August 2, 2011, President Obama signed into law the Budget Control Act of 2011, which, among other things, created the Joint Select Committee on Deficit Reduction to recommend to the U.S. Congress proposals in spending reductions. The Joint Select Committee did not achieve a targeted deficit reduction of at least $1.2 trillion for the years 2013 through 2021, triggering the legislation's automatic reduction to several government programs. This includes reductions to Medicare payments to providers of 2% per fiscal year through 2024, unless additional congressional action is taken. On January 2, 2013, President Obama signed into law the American Taxpayer Relief Act of 2012, or the ATRA which, among other things, reduced Medicare payments to several

49


Table of Contents

providers, including hospitals and imaging centers and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. We expect that additional state and federal healthcare reform measures will be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, which could result in reduced demand for our products or additional pricing pressure.

Risks related to other legal and compliance matters

Our financial performance may be adversely affected by medical device tax provisions in the healthcare reform laws.

        The PPACA imposes, among other things, an excise tax of 2.3% on any entity that manufactures or imports medical devices offered for sale in the United States as of 2013. Under these provisions, the Congressional Research Service predicts that the total cost to the medical device industry may be up to $20 billion over the next decade. The Internal Revenue Service issued final regulations implementing the tax in December of 2012 that require, among other things, bi-monthly payments if the tax liability exceeds $2,500 for the quarter and quarterly reporting. We are subject to this excise tax and during the year ending December 31, 2014, we incurred $0.7 million in tax expense associated with the medical device tax in the United States, which is included in general and administrative expense.

We are subject to federal and state laws prohibiting "kickbacks" and false and fraudulent claims which, if violated, could subject us to substantial penalties. Additionally, any challenges to or investigation into our practices under these laws could cause adverse publicity and could be costly to respond to, and thus could harm our business.

        There are numerous U.S. federal and state laws pertaining to healthcare fraud and abuse, including anti-kickback laws and physician self-referral laws. Our relationships with surgeons, hospitals and other medical facilities, group purchasing organizations and our international distributors are subject to scrutiny under these laws. Violations of these laws are punishable by criminal and civil sanctions, including significant monetary penalties and, in some instances, imprisonment and exclusion from participation in federal and state healthcare programs, including the Medicare, Medicaid and Veterans Administration health programs.

        Healthcare fraud and abuse regulations are complex, and even minor irregularities can potentially give rise to claims that a statute or prohibition has been violated. The laws that may affect our ability to operate include:

50


Table of Contents

        Further, the PPACA, among other things, amended the intent requirements of the federal Anti-Kickback Statute and the criminal statute governing healthcare fraud. A person or entity can now be found guilty of violating the Anti-Kickback Statute and the federal criminal healthcare fraud statute without actual knowledge of the statute or specific intent to violate it. In addition, the PPACA provides that the government may assert that a claim that included items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal False Claims Act or federal civil money penalties statute. Possible sanctions for violation of laws include monetary fines, civil and criminal penalties, exclusion from Medicare and Medicaid programs and forfeiture of amounts collected in violation of such prohibitions. Moreover, while we do not submit claims and our customers make the ultimate decision on how to submit claims, from time-to-time, we may provide generally applicable information regarding reimbursement from publicly available sources to our customers, including hospitals, surgery centers and physicians. If a government authority were to conclude that we provided improper advice to our customers or encouraged the submission of false claims for reimbursement, we could face action against us by government authorities. Any violations of these laws, or any action against us for violation of these laws, even if we successfully defend such actions, could result in a material adverse effect on our reputation, business, results of operations and financial condition.

        To enforce compliance with the federal laws, the DOJ has recently increased its scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. Dealing with investigations can be time- and resource-consuming and can divert management's attention from a company's business. Additionally, settlements with the DOJ or other law enforcement agencies have forced healthcare providers to agree to additional onerous compliance and reporting requirements as part of consent decrees or corporate integrity agreements. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business.

        On February 8, 2013, the Centers for Medicare & Medicaid Services, or CMS, released its final rule, commonly known as the Physician Payment Sunshine Act, implementing certain provisions of the PPACA imposing new reporting requirements on device manufacturers for payments by them and in some cases their distributors to physicians and teaching hospitals, as well as ownership and investment interests held by physicians. Failure to submit required information may result in civil monetary penalties of up to an aggregate of $150,000 per year (or up to an aggregate of $1 million per year for "knowing failures"), for all payments, transfers of value or ownership or investment interests that are not timely, accurately and completely reported in an annual submission. Device manufacturers were required to begin collecting data on August 1, 2013 and to submit reports to CMS beginning March 31, 2014 and by the 90th day of each subsequent calendar year. In addition, CMS estimates that approximately 1,000 device and medical supply companies will be required to comply with the disclosure requirements and that the average cost per entity will be approximately $170,000 in the first year. The Physician Payment Sunshine Act was only recently enacted and

51


Table of Contents

additional questions surrounding implantation remain to be resolved by CMS. In light of this regulatory uncertainty, we may not, in the view of CMS, successfully report all transfers of value by us and our independent sales representatives and distributors, and any failure to successfully report could result in significant fines and penalties.

        In addition, the scope and enforcement of these laws is uncertain and subject to rapid change in the current environment of healthcare reform, especially in light of the lack of applicable precedent and regulations. Federal or state regulatory authorities might challenge our current or future activities under these laws. Any such challenge could have a material adverse effect on our reputation, business, results of operations and financial condition. Any state or federal regulatory review of us, regardless of the outcome, would be costly and time-consuming. Additionally, we cannot predict the impact of any changes in these laws, whether or not retroactive.

Laws and regulations governing our foreign operations, including anti-corruption laws, may preclude us from developing, manufacturing and selling certain products outside of the United States and require us to develop and implement costly compliance programs.

        We must dedicate additional resources to comply with numerous laws and regulations in each jurisdiction in which we operate or plan to operate outside of the United States, including anti-corruption laws such as the FCPA, U.K. Bribery Act 2010, or the Bribery Act, and other anti-corruption laws. The FCPA, the Bribery Act and these other anti-corruption laws generally prohibit us, our officers, and our employees and intermediaries from bribing, being bribed or making other prohibited payments to government officials or other persons to obtain or retain business or gain some other business advantage. The FCPA also obligates companies whose securities are listed in the United States to comply with certain accounting provisions requiring the company to maintain books and records that accurately and fairly reflect all transactions of the company, including international subsidiaries, and to devise and maintain an adequate system of internal accounting controls for international operations.

        Compliance with the FCPA and Bribery Act is expensive and difficult, particularly in countries in which corruption is a recognized problem, and we may participate in collaborations and relationships with third parties whose actions could potentially subject us to liability under the FCPA, Bribery Act or local anti-corruption laws. In addition, the FCPA presents particular challenges in the medical device industry, because, in many countries, hospitals are operated by the government, and doctors and other hospital employees are considered foreign officials. Certain payments to hospitals in connection with clinical studies and other work have been deemed to be improper payments to government officials and have led to FCPA enforcement actions.

        There is no assurance that we will be completely effective in ensuring our compliance with all applicable anti-corruption laws, including the FCPA, the Bribery Act or other legal requirements. If we are not in compliance with the FCPA, the Bribery Act and other anti-corruption laws, we may be subject to criminal and civil penalties, disgorgement and other sanctions and remedial measures, and legal expenses, which could have an adverse impact on our business, financial condition, results of operations and liquidity. Likewise, any investigation of any potential violations of the FCPA, the Bribery Act or other anti-corruption laws or U.S., U.K. or other authorities could also have an adverse impact on our reputation, our business, results of operations and financial condition. The Securities and Exchange Commission, or SEC, also may suspend or bar issuers from trading securities on U.S. exchanges for violations of the FCPA's accounting provisions.

        Various laws, regulations and executive orders also restrict the use and dissemination outside of the United States, or the sharing with certain non-U.S. nationals, of information classified for national security purposes, as well as certain products and technical data relating to those products. To comply with these laws will require additional resources, and these laws may preclude

52


Table of Contents

us from developing, manufacturing or selling certain product candidates and products outside of the United States, which could limit our growth potential and increase our development costs.

If we fail to comply with environmental, health and safety laws and regulations, we could become subject to fines or penalties or incur costs that could have a material adverse effect on the success of our business.

        We are subject to numerous environmental, health and safety laws and regulations, including those governing the generation, handling, use, storage, treatment, manufacture, transportation and disposal of, and exposure to, hazardous materials and wastes, as well as laws and regulations relating to occupational health and safety. Our operations involve the use of hazardous materials, including chemicals, and produce hazardous waste products. We generally contract with third parties for the disposal of these materials and wastes. We cannot eliminate the risk of contamination or injury from these materials or wastes. In the event of contamination or injury resulting from hazardous materials or wastes either at our sites or third-party sites, we could be held liable for any resulting damages, and any liability could exceed our resources.

        Although we maintain workers' compensation insurance for certain costs and expenses we may incur due to injuries to our employees resulting from the use of hazardous materials or other work related injuries, this insurance may not provide adequate coverage against potential liabilities. We also could incur significant costs associated with civil or criminal fines and penalties.

        In addition, we may incur substantial costs in order to comply with current or future environmental, health and safety laws and regulations, which have tended to become more stringent over time. These current or future laws and regulations may impair our research, development or production efforts. Failure to comply with these laws and regulations also may result in substantial fines, penalties or other sanctions or liabilities, which could materially adversely affect our business, financial condition, results of operations and prospects.

If we are found to have violated laws protecting the confidentiality of patient health information, we could be subject to civil or criminal penalties, which could increase our liabilities and harm our reputation or our business.

        There are a number of federal and state laws protecting the confidentiality of certain patient health information, including patient records, and restricting the use and disclosure of that protected information. In particular, the U.S. Department of Health and Human Services, or HHS, promulgated patient privacy rules under the Health Insurance Portability and Accountability Act of 1996, or HIPAA. These privacy rules protect medical records and other personal health information by limiting their use and disclosure, giving individuals the right to access, amend and seek accounting of their own health information and limiting most use and disclosures of health information to the minimum amount reasonably necessary to accomplish the intended purpose. Healthcare providers, including our customers, are subject to these regulations, and we contractually agree to obligations of confidentiality with respect to personal health information we receive as part of our business operations. If we or any of our service providers are found to be in violation of the promulgated patient privacy rules under HIPAA, we could be subject to civil or criminal penalties, which could increase our liabilities, harm our reputation and have a material adverse effect on our business, financial condition and operating results.

53


Table of Contents

Risks related to our common stock and this offering

If you purchase shares of common stock in this offering, you will suffer immediate dilution in the book value of your investment.

        The initial public offering price of our common stock is substantially higher than the net tangible book value per share of our common stock. Therefore, if you purchase shares of our common stock in this offering, you will pay a price per share that substantially exceeds our net tangible book value per share after this offering. Based on the assumed initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, you will experience immediate dilution of $11.00 per share, representing the difference between our pro forma net tangible book value per share after giving effect to this offering and the assumed initial public offering price. Purchasers of common stock in this offering will have contributed approximately 29% of the aggregate price paid by all purchasers of our stock and will own approximately 23% of our common stock outstanding after this offering, excluding any shares of our common stock that they may have acquired prior to this offering. Furthermore, if the underwriters exercise their option to purchase additional shares or our previously issued options and warrants to acquire common stock at prices below the assumed initial public offering price are exercised, you will experience further dilution. For a further description of the dilution that you will experience immediately after this offering, see "Dilution."

An active trading market for our common stock may not develop.

        Prior to this offering, there has been no public market for our common stock. The initial public offering price for our common stock will be determined through negotiations with the underwriters. This price will not necessarily reflect the price at which investors in the market will be willing to buy and sell our shares following this offering. Although we have applied to list our common stock on the NASDAQ Global Market, an active trading market for our shares may never develop or, if developed, be maintained following this offering. If an active market for our common stock does not develop or is not maintained, it may be difficult for you to sell shares you purchase in this offering without depressing the market price for the shares or at all. An inactive trading market may also impair our ability to raise capital to continue to fund operations by selling shares and may impair our ability to acquire other companies or technologies by using our shares as consideration.

The price of our common stock is likely to be volatile and fluctuate substantially, which could result in substantial losses for purchasers of our common stock in this offering.

        Our stock price is likely to be volatile. The stock market in general and the market for medical device companies in particular have experienced extreme volatility that has often been unrelated to the operating performance of particular companies. As a result of this volatility, you may not be able to sell your common stock at or above the initial public offering price. The market price for our common stock may be influenced by many factors, including:

54


Table of Contents

Our quarterly operating results are subject to substantial fluctuations, and you should not rely on them as an indication of our future results.

        Our quarterly operating results have historically varied and may in the future vary significantly due to a combination of factors, many of which are beyond our control. These factors include:

55


Table of Contents

        We believe our quarterly sales and operating results may vary significantly in the future and period-to-period comparisons of our results of operations are not necessarily meaningful and should not be relied upon as indications of future performance. We may not be able to increase our sales, sustain our sales in future periods or achieve or maintain profitability in any future period. Any shortfalls in sales or earnings from levels expected by securities or orthopedic industry analysts could have an immediate and significant adverse effect on the trading price of our common stock in any given period.

We have broad discretion in the use of the net proceeds from this offering and may not use them effectively.

        Our management will have broad discretion in the application of the net proceeds from this offering and could spend the proceeds in ways that do not improve our results of operations or enhance the value of our common stock. See "Use of Proceeds." The failure by our management to apply these funds effectively could result in financial losses that could have a material adverse effect on our business and cause the price of our common stock to decline. Pending their use, we may invest the net proceeds from this offering in a manner that does not produce income or that loses value.

A significant portion of our total outstanding shares is restricted from immediate resale but may be sold into the market in the near future, which could cause the market price of our common stock to decline significantly, even if our business is doing well.

        Sales of a substantial number of shares of our common stock in the public market could occur at any time. These sales, or the perception in the market that the holders of a large number of shares of common stock intend to sell shares, could reduce the market price of our common stock. After this offering, we will have 39,062,616 shares of common stock outstanding based on the 29,843,235 shares outstanding as of May 31, 2015 after giving effect to the conversion of all outstanding shares of our preferred stock into 25,497,480 shares of our common stock upon the closing of this offering, the assumed warrant exercises and the Series D warrant exchange. Of these shares, the 9,000,000 shares sold by us in this offering may be resold in the public market immediately, unless purchased by our affiliates. The remaining 30,062,616 shares are currently restricted under securities laws or as a result of lock-up or other agreements, but will be able to be sold after this offering as described in the "Shares Eligible for Future Sale" and "Underwriting" sections of this prospectus. Moreover, upon the closing of the offering contemplated by the registration statement of which this prospectus forms a part, pursuant to the terms of the Registration Rights Agreement described under "Description of Capital Stock—Registration rights," subject to the lock-agreements described under "Shares Eligible for Future Sale—Lock-up agreements," holders of an aggregate of 25,497,480 shares of our common stock that will be issued upon the conversion of our preferred stock, which we refer to as registrable shares, will have the right to require us to register these registrable shares under the Securities Act no earlier than 180 days after the closing of the offering contemplated by the registration statement of which this prospectus forms a part, and to participate in future registrations of securities by us, under the circumstances and subject to the conditions described under "Description of Capital Stock—

56


Table of Contents

Registration rights." In addition, subject to the lock-up agreements described under "Shares Eligible for Future Sale—Lock-up agreements," upon the closing of the offering contemplated by the registration statement of which this prospectus forms a part, the holders of warrants to purchase an aggregate of 684,334 shares of our common stock, assuming conversion of our preferred stock into common stock upon the closing of the offering, the assumed warrant exercises and the Series D warrant exchange, will have the right to have the shares of common stock issuable upon exercise of such warrants be treated as registrable shares and to require us to register these registrable shares under the Securities Act no earlier than 180 days after the closing of the offering contemplated by the registration statement of which this prospectus forms a part, and to participate in future registrations of securities by us, under the circumstances and subject to the conditions described under "Description of Capital Stock—Registration rights." We also plan to register all 7,878,488 shares of common stock that we may issue under our equity compensation plans. Once we register these shares, they can be freely sold in the public market upon issuance and once vested, subject to volume limitations applicable to affiliates and the lock-up agreements described in the "Underwriting" section of this prospectus.

After this offering, our executive officers, directors and principal stockholders, if they choose to act together, will continue to have the ability to significantly influence all matters submitted to stockholders for approval.

        Upon the closing of this offering, our executive officers, directors and stockholders who owned more than 5% of our outstanding common stock before this offering and their affiliates will, in the aggregate, beneficially own shares representing approximately 40.49% of our capital stock (or 39.22% if the underwriters exercise their option to purchase additional shares in full). As a result, if these stockholders were to choose to act together, they would be able to significantly influence all matters submitted to our stockholders for approval, as well as our management and affairs. For example, these persons, if they choose to act together, would significantly influence the election of directors and approval of any merger, consolidation or sale of all or substantially all of our assets. This concentration of ownership control may:

Our ability to use our net operating loss carryforwards and certain other tax attributes may be limited.

        As of December 31, 2014, we had federal net operating loss, or NOL, carryforwards of $229 million and state NOL carryforwards of $117 million available to reduce future taxable income. These federal and state NOL carryforwards will begin to expire in 2020, if not utilized. Utilization of these NOL and tax credit carryforwards may be subject to a substantial limitation under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, or the Code, and comparable provisions of state, local and foreign tax laws due to changes in ownership of our company that have occurred previously or that could occur in the future. We have completed a study to assess whether an ownership change has occurred or whether there have been multiple ownership changes since our formation. The results of this study indicate that we experienced ownership changes, as defined by Section 382 of the Code. We have not identified NOLs that, as a result of these limitations, will expire unused. We may also experience ownership changes in the future as a result of subsequent shifts in our stock ownership, including as a result of the

57


Table of Contents

consummation of this offering. As a result, if we generate taxable income, our ability to use our pre-change NOL and tax credits carryforwards to reduce U.S. federal and state taxable income may be subject to further limitations, which could result in increased future tax liability to us. All or a portion of the carryforwards could expire before being available to reduce future income tax liabilities.

Provisions in our corporate charter documents and under Delaware law could make an acquisition of us, which may be beneficial to our stockholders, more difficult and may prevent attempts by our stockholders to replace or remove our current management.

        Provisions in our restated certificate of incorporation and our bylaws that will become effective upon the closing of this offering may discourage, delay or prevent a merger, acquisition or other change in control of us that stockholders may consider favorable, including transactions in which you might otherwise receive a premium for your shares. These provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock. In addition, because our board of directors is responsible for appointing the members of our management team, these provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors. Among other things, these provisions:

        Moreover, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which prohibits a person who owns in excess of 15% of our outstanding voting stock from merging or combining with us for a period of three years after the date of the transaction in which the person acquired in excess of 15% of our outstanding voting stock, unless the merger or combination is approved in a prescribed manner. This could discourage, delay or prevent someone from acquiring us or merging with us, whether or not it is desired by, or beneficial to, our stockholders.

58


Table of Contents

Our restated certificate of incorporation that will become effective upon the closing of this offering designates the state courts in the State of Delaware or, if no state court located within the State of Delaware has jurisdiction, the federal court for the District of Delaware, as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, which could discourage lawsuits against our company and our directors and officers.

        Our restated certificate of incorporation that will become effective upon the closing of this offering provides that, unless our board of directors otherwise determines, the state courts in the State of Delaware or, if no state court located within the State of Delaware has jurisdiction, the federal court for the District of Delaware, will be the sole and exclusive forum for any derivative action or proceeding brought on our behalf, any action asserting a claim of breach of a fiduciary duty owed by any of our directors or officers to our company or our stockholders, any action asserting a claim against us or any of our directors or officers arising pursuant to any provision of the General Corporation Law of the State of Delaware, or any action asserting a claim against us or any of our directors or officers governed by the internal affairs doctrine. This exclusive forum provision may limit the ability of our stockholders to bring a claim in a judicial forum that such stockholders find favorable for disputes with us or our directors or officers, which may discourage such lawsuits against us and our directors and officers.

Because we do not anticipate paying any cash dividends on our capital stock in the foreseeable future, stockholders must rely on capital appreciation, if any, for any return on their investment.

        We have never declared or paid cash dividends on our capital stock. We currently intend to retain all of our future earnings, if any, to finance the operation, development and growth of our business. Furthermore, the terms of our SVB/Oxford Agreement preclude us from paying dividends, and any future debt agreements may also preclude us from paying or place restrictions on our ability to pay dividends. As a result, capital appreciation, if any, of our common stock will be your sole source of gain with respect to your investment for the foreseeable future.

We are an "emerging growth company," and the reduced disclosure requirements applicable to emerging growth companies may make our common stock less attractive to investors.

        We are an "emerging growth company," or EGC, as defined in the JOBS Act, and may remain an EGC until the earlier of: (1) the last day of the fiscal year in which we have total annual gross revenues of $1 billion or more; (2) the last day of the fiscal year following the fifth anniversary of the date of the completion of this offering; (3) the date on which we have issued more than $1 billion in nonconvertible debt during the previous three years; or (4) the date on which we are deemed to be a large accelerated filer under the rules of the SEC, which means the first day of the year following the first year in which the market value of our common stock that is held by non-affiliates exceeds $700 million as of June 30. For so long as we remain an EGC, we are permitted and plan to rely on exemptions from certain disclosure requirements that are applicable to other public companies that are not EGCs. These exemptions include not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act of 2002, or SOX Section 404, not being required to comply with any requirement that may be adopted by the Public Company Accounting Oversight Board regarding mandatory audit firm rotation or a supplement to the auditor's report providing additional information about the audit and the financial statements, reduced disclosure obligations regarding executive compensation and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. In this prospectus, we have provided only two years of audited financial statements and have not included all of the executive compensation related

59


Table of Contents

information that would be required if we were not an EGC. We cannot predict whether investors will find our common stock less attractive if we rely on certain or all of these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.

        In addition, the JOBS Act provides that an EGC can take advantage of an extended transition period for complying with new or revised accounting standards. This allows an EGC to delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have irrevocably elected not to avail ourselves of this exemption from new or revised accounting standards and, therefore, we will be subject to the same new or revised accounting standards as other public companies that are not EGCs.

We will incur increased costs as a result of operating as a public company, and our management will be required to devote substantial time to new compliance initiatives and corporate governance practices.

        As a public company, and particularly after we are no longer an EGC, we will incur significant legal, accounting and other expenses that we did not incur as a private company. The Sarbanes-Oxley Act of 2002, the Dodd-Frank Wall Street Reform and Consumer Protection Act, the listing requirements of the NASDAQ Global Market and other applicable securities rules and regulations impose various requirements on public companies, including establishment and maintenance of effective disclosure and financial controls and corporate governance practices. We expect that we will need to hire additional accounting, finance and other personnel in connection with our becoming, and our efforts to comply with the requirements of being, a public company and our management and other personnel will need to devote a substantial amount of time towards maintaining compliance with these requirements. These requirements will increase our legal and financial compliance costs and will make some activities more time-consuming and costly. For example, we expect that the rules and regulations applicable to us as a public company may make it more difficult and more expensive for us to obtain director and officer liability insurance, which could make it more difficult for us to attract and retain qualified members of our board of directors. We are currently evaluating these rules and regulations, and cannot predict or estimate the amount of additional costs we may incur or the timing of such costs. These rules and regulations are often subject to varying interpretations, in many cases due to their lack of specificity, and, as a result, their application in practice may evolve over time as new guidance is provided by regulatory and governing bodies. This could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices.

        Pursuant to SOX Section 404 we will be required to furnish a report by our management on our internal control over financial reporting beginning with our second filing of an Annual Report on Form 10-K with the SEC after we become a public company, including an attestation report on internal control over financial reporting issued by our independent registered public accounting firm. However, while we remain an EGC, we will not be required to include an attestation report on internal control over financial reporting issued by our independent registered public accounting firm. To achieve compliance with SOX Section 404 within the prescribed period, we will be engaged in a process to document and evaluate our internal control over financial reporting, which is both costly and challenging. In this regard, we will need to continue to dedicate internal resources, potentially engage outside consultants and adopt a detailed work plan to assess and document the adequacy of internal control over financial reporting, continue steps to improve control processes as appropriate, validate through testing that controls are functioning as documented and implement a continuous reporting and improvement process for internal control over financial reporting. Despite our efforts, there is a risk that neither we nor our independent registered public accounting firm will be able to conclude, within the prescribed timeframe or at all, that our internal control over financial reporting is effective as required by SOX Section 404. If we identify one or more material weaknesses, it could result in an adverse reaction in the financial markets due to a loss of confidence in the reliability of our financial statements.

60


Table of Contents


SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

        This prospectus contains forward-looking statements that involve substantial risks and uncertainties. All statements, other than statements of historical facts, contained in this prospectus, including statements regarding our strategy, future operations, future financial position, future revenue, projected costs, prospects, plans and objectives of management and expected market growth are forward-looking statements. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements.

        The words "anticipate," "believe," "continue," "could," "estimate," "expect," "intend," "may," "might," "plan," "potential," "predict," "project," "should," "target," "will," or "would" or the negative of these terms or other similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words.

        These forward-looking statements include, among other things, statements about:

61


Table of Contents

        We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements, and you should not place undue reliance on our forward-looking statements. Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements we make. We have included important factors in the cautionary statements included in this prospectus, particularly in the "Risk Factors" section, that could cause actual results or events to differ materially from the forward-looking statements that we make. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, collaborations, joint ventures or investments that we may make or enter into.

        You should read this prospectus, the documents that we reference in this prospectus and the documents that we have filed as exhibits to the registration statement of which this prospectus is a part completely and with the understanding that our actual future results may be materially different from what we expect. We do not assume any obligation to update any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

62


Table of Contents


USE OF PROCEEDS

        We estimate that the net proceeds from our issuance and sale of 9,000,000 shares of our common stock in this offering will be approximately $121 million, assuming an initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, after deducting estimated underwriting discounts and commissions and estimated offering expenses payable by us. If the underwriters exercise their option to purchase additional shares in full, we estimate that the net proceeds from this offering will be approximately $140 million.

        A $1.00 increase (decrease) in the assumed initial public offering price of $15.00 per share would increase (decrease) the net proceeds from this offering by approximately $8.4 million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting the estimated underwriting discounts and commissions.

        As of March 31, 2015, we had cash and cash equivalents of $22.9 million. We currently estimate that we will use the net proceeds from this offering as follows:

        We believe opportunities may exist from time to time to expand our current business through acquisitions or in-licenses of complementary products or technologies or acquisitions of companies with complementary products or technologies. While we have no current agreements, commitments or understandings for any specific acquisitions or in-licenses at this time, we may use a portion of the net proceeds for these purposes.

        The expected use of net proceeds from this offering represents our intentions based upon our current plans and business conditions, which could change in the future as our plans and business conditions evolve. The amounts and timing of our actual expenditures may vary significantly depending on numerous factors including the degree and rate of market acceptance of, and the amount of revenue derived from, our products, including our iTotal PS product which is currently in limited commercial launch, the timing of U.S. and EU regulatory clearance and commercial launch of our iTotal Hip, the progress of our plans to expand and further vertically integrate our manufacturing processes and facilities and the size, scope and timing of any additional research and development efforts and clinical studies that we may decide to pursue for our current products or future product candidates. As a result, our management will retain broad discretion over the allocation of the net proceeds from this offering.

        Pending our use of the net proceeds from this offering, we intend to invest the net proceeds in a variety of capital preservation investments, including short-term, investment-grade, interest-bearing instruments and U.S. government securities.

63


Table of Contents


DIVIDEND POLICY

        We have never declared or paid any cash dividends on our capital stock. We currently intend to retain all of our future earnings, if any, to finance the growth and development of our business. We do not intend to pay any cash dividends to the holders of our common stock in the foreseeable future. Our ability to pay dividends on our common stock is prohibited by the covenants of our debt facilities with Silicon Valley Bank and Oxford Financial LLC and with the Massachusetts Development Finance Agency and may be further restricted by the terms of any of our future indebtedness.


INDUSTRY AND OTHER DATA

        This prospectus includes statistical and other industry and market data that we obtained from industry publications and research, surveys and studies conducted by third parties, including content republished with permission from ORTHOWORLD®, a specialized publishing firm serving the global orthopedic market. Industry publications and third party research, surveys and studies generally indicate that their information has been obtained from sources believed to be reliable, although they do not guarantee the accuracy or completeness of such information. While we believe these industry publications and third-party research, surveys and studies are reliable, we have not independently verified such data.

64


Table of Contents


CAPITALIZATION

        The following table sets forth our cash and cash equivalents and capitalization as of March 31, 2015 on:

        See "Prospectus Summary—The Offering" for a description of the assumed warrant exercises and the Series D warrant exchange.

        Our capitalization following the closing of this offering will be adjusted based on the actual initial public offering price and other terms of the offering determined at pricing. You should read the following table in conjunction with our consolidated financial statements and related notes,

65


Table of Contents

"Selected Consolidated Financial Data" and "Management's Discussion and Analysis of Financial Condition and Results of Operations" appearing elsewhere in this prospectus.

 
  As of March 31, 2015  
(in thousands, except share and per share data)
  Actual   Pro forma   Pro forma
as adjusted
 
 
  (unaudited)
   
   
 

Cash and cash equivalents

  $ 22,939   $ 22,995   $ 144,277  

Stockholders' equity:

                   

Convertible preferred stock, $0.00001 par value; 53,496,241 shares authorized, 50,985,652 shares issued and outstanding, actual; no shares authorized, issued or outstanding, pro forma and pro forma as adjusted

             

Preferred stock, $0.00001 par value; no shares authorized, issued or outstanding, actual; 5,000,000 shares authorized, no shares issued or outstanding, pro forma and pro forma as adjusted

             

Common stock, $0.00001 par value per share; 80,000,000 shares authorized, 4,314,338 shares issued and outstanding, actual; 200,000,000 shares authorized, 29,807,131 shares issued and outstanding, pro forma; 200,000,000 shares authorized, 39,062,616 shares issued and outstanding, pro forma as adjusted

             

Additional paid-in capital

    319,634     319,690     440,972  

Accumulated deficit

    (282,353 )   (282,353 )   (282,353 )

Accumulated other comprehensive (loss) income

    (500 )   (500 )   (500 )

Total stockholders' equity

    36,781     36,837     158,119  

Total capitalization

  $ 36,781   $ 36,837   $ 158,119  

        A $1.00 increase (decrease) in the assumed initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, would increase (decrease) the pro forma as adjusted amount of each of total cash and cash equivalents and total stockholders' equity by approximately $8.4 million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting estimated underwriting discounts and commissions and estimated offering expenses payable by us.

        The table above does not include:

66


Table of Contents


DILUTION

        If you invest in our common stock in this offering, your ownership interest will be immediately diluted to the extent of the difference between the initial public offering price per share and the pro forma tangible book value per share of our common stock after this offering.

        Our historical net tangible book value as of March 31, 2015 was $35.0 million, or $8.09 per share of our common stock. Historical net tangible book value per share represents the amount of our total tangible assets less total liabilities, divided by 4,314,338 shares of our common stock outstanding as of March 31, 2015.

        Our pro forma net tangible book value as of March 31, 2015 was $35.0 million, or $1.16 per share of common stock. Pro forma net tangible book value per share represents the amount of our total tangible assets less our total liabilities, divided by the pro forma number of shares of our common stock outstanding on March 31, 2015, after giving effect to the following:

        After giving effect to our issuance and sale of 9,000,000 shares of common stock in this offering at an assumed initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, and after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us, the pro forma net tangible book value as of March 31, 2015 would have been $156.2 million, or $4.00 per share. This represents an immediate increase in pro forma net tangible book value to existing stockholders of $2.84 per share. The initial public offering price per share will significantly exceed the pro forma net tangible book value per share. Accordingly, new investors who purchase shares of common stock in this offering will suffer an immediate dilution of their investment of $11.00 per share. The following table illustrates this per share dilution to the new investors purchasing shares of common stock in this offering without giving effect any exercise by the underwriters to purchase additional shares:

Assumed initial public offering price per share (the midpoint of the estimated price range set forth on the cover page of this prospectus)

        $ 15.00  

Historical net tangible book value per share as of March 31, 2015

  $ 8.09        

Decrease attributable to the conversion of outstanding preferred stock and warrants to purchase preferred stock

    (6.93 )      

Pro forma net tangible book value per share as of March 31, 2015

    1.16        

Increase per share attributable to sale of shares of common stock in this offering

    2.84        

Pro forma net tangible book value per share after this offering

        $ 4.00  

Dilution per share to new investors

        $ 11.00  

        Each $1.00 increase (decrease) in the assumed initial public offering price of $15.00 per share would increase (decrease) the pro forma net tangible book value by $8.4 million, the pro forma net tangible book value per share after this offering by $0.22 per share and the dilution to investors in this offering by $0.78 per share, assuming that the number of shares offered by us, as set forth on

67


Table of Contents

the cover page of this prospectus, remains the same and after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.

        If the underwriters exercise their option to purchase additional shares in full, the pro forma net tangible book value will increase to $4.33 per share, representing an immediate increase to existing stockholders of $3.17 per share and an immediate dilution of $10.67 per share to new investors. If any shares are issued upon exercise of outstanding options or our outstanding warrants, you will experience further dilution.

        The following table summarizes, on a pro forma basis as of March 31, 2015, after giving effect to the exercise of warrants to purchase 9,374 shares of our preferred stock since March 31, 2015; to the automatic conversion of all of our outstanding shares of preferred stock into 25,497,480 shares of common stock upon the closing of this offering; the assumed warrant exercises; the Series D warrant exchange, the differences between the number of shares of common stock purchased from us, the total consideration paid to us and the average price per share paid by existing stockholders and by new investors purchasing shares of common stock in this offering. The calculation below is based on an assumed initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, before the deduction of the estimated underwriting discounts and commissions and estimated offering expenses payable by us:

 
  Shares purchased   Total consideration    
 
 
  Average
price per
share
 
 
  Number   %   Amount   %  

Existing stockholders

    30,031,199     77 % $ 329,624,223     71 % $ 10.97  

New investors

    9,000,000     23     135,000,000     29   $ 15.00  

Total

    39,031,199     100 % $ 464,624,223     100 % $ 11.90  

        A $1.00 increase (decrease) in the assumed initial public offering price of $15.00 per share, which is the midpoint of the estimated price range set forth on the cover page of this prospectus, would increase (decrease) the total consideration paid by new investors by $9.0 million and increase (decrease) the percentage of total consideration paid by new investors by approximately 1.3%, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same.

        The number of shares purchased from us by existing stockholders is based on 4,314,338 shares of our common stock outstanding as of March 31, 2015, after giving effect to the exercise of warrants to purchase 9,374 shares of our preferred stock since March 31, 2015; to the automatic conversion of all of our outstanding shares of preferred stock into 25,497,480 shares of common stock upon the closing of this offering; the assumed warrant exercises; the Series D warrant exchange; and excludes:

68


Table of Contents

        If the underwriters exercise their option to purchase additional shares in full:

        Effective immediately upon closing of this offering, an aggregate of 2,256,013 shares of our common stock will be reserved for issuance under our 2015 stock incentive plan, assuming the number of shares available for issuance under our 2011 stock incentive plan, which become available for issuance under the 2015 stock incentive plan upon the closing of the offering, does not change following May 31, 2015, and this share reserve will also be subject to automatic annual increases in accordance with the terms of the 2015 stock incentive plan. Furthermore, we may choose to raise additional capital through the sale of equity or equity-linked securities due to market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans. To the extent that new equity awards are issued under our 2015 stock incentive plans or we issue additional shares of common stock or other equity or equity-linked securities in the future, there may be further dilution to investors participating in this offering.

69


Table of Contents


SELECTED CONSOLIDATED FINANCIAL DATA

        You should read the following selected consolidated financial data together with our consolidated financial statements and accompanying notes appearing at the end of this prospectus and the "Management's Discussion and Analysis of Financial Condition and Results of Operations" section of this prospectus. The selected consolidated financial data in this section are not intended to replace our consolidated financial statements and the related notes included elsewhere in this prospectus.

        The selected consolidated statement of operations data for the years ended December 31, 2013 and 2014 and the selected consolidated balance sheet data as of December 31, 2013 and 2014 are derived from our audited consolidated financial statements appearing elsewhere in this prospectus. The selected consolidated statement of operations data for the three months ended March 31, 2014 and 2015 and the selected consolidated balance sheet data as of March 31, 2014 and 2015 are derived from our unaudited consolidated financial statements included elsewhere in this prospectus. The selected consolidated statement of operations data for the year ended December 31, 2012 and the selected consolidated balance sheet data as of December 31, 2012 are derived from our audited consolidated financial statements, which are not included in this prospectus. Our historical results are not necessarily indicative of the results that may be expected

70


Table of Contents

in the future, and our interim period results are not necessarily indicative of results to be expected for a full year or any other interim period.

 
  Years ended December 31,   Three months ended
March 31,
 
(in thousands, except share and per share data)
  2012   2013   2014   2014   2015  
 
   
   
   
  (unaudited)
  (unaudited)
 

Consolidated statements of operations data:

                               

Revenue

  $ 24,644   $ 34,597   $ 48,186   $ 10,799   $ 14,700  

Cost of revenue

    21,820     27,283     30,638     7,512     9,388  

Gross profit

    2,824     7,314     17,548     3,287     5,312  

Operating expenses:

   
 
   
 
   
 
   
 
   
 
 

Sales and marketing

    26,070     26,149     31,103     8,379     9,579  

Research and development

    10,127     13,779     15,107     3,578     4,016  

General and administrative

    10,827     14,693     16,763     3,948     5,780  

Total operating expenses

    47,024     54,621     62,973     15,905     19,375  

Loss from operations

    (44,200 )   (47,307 )   (45,425 )   (12,618 )   (14,063 )

Other income and expenses

                               

Interest income

    126     89     104     25     39  

Interest expense

    (3,427 )   (642 )   (360 )   (52 )   (223 )

Total other expenses

    (3,301 )   (553 )   (256 )   (27 )   (184 )

Loss before income taxes

    (47,501 )   (47,860 )   (45,681 )   (12,645 )   (14,247 )

Income tax provision

        29     41     8     10  

Net loss

  $ (47,501 ) $ (47,889 ) $ (45,722 ) $ (12,653 ) $ (14,257 )

Net loss per share applicable to common stockholders—basic and diluted(1)

  $ (13.48 ) $ (11.98 ) $ (10.78 ) $ (3.04 ) $ (3.32 )

Weighted-average number of common shares used in net loss per share applicable to common stockholders—basic and diluted(1)

   
3,523,466
   
3,996,867
   
4,239,564
   
4,165,760
   
4,296,613
 

Pro forma earnings (loss) per common share, basic and diluted (unaudited)

             
$

(1.53

)
     
$

(0.48

)

Weighted-average shares used to compute pro forma net earnings (loss) per common share, basic and diluted (unaudited)(1)(2)

               
29,956,425
         
30,013,474
 

(1)
See Note B in the notes to our consolidated financial statements appearing elsewhere in this prospectus for a description of the method used to calculate basic and diluted net (loss) per share applicable to common stockholders.

(2)
The pro forma net loss per share applicable to common stockholders is computed using the weighted-average number of common shares outstanding after giving effect to (a) the exercise of warrants to purchase 9,374 shares of our preferred stock since March 31, 2015, (b) the automatic conversion of all outstanding shares of our preferred stock into 25,492,793 shares of common stock, (c) the assumed warrant exercises, and (d) the Series D warrant exchange.

 
  December 31,    
 
 
  March 31,
2015
 
(in thousands)
  2012   2013   2014  
 
   
   
   
  (unaudited)
 

Consolidated balance sheet data:

                         

Cash and cash equivalents

  $ 39,734   $ 54,221   $ 37,900   $ 22,939  

Working capital

    37,122     54,277     45,036     31,065  

Total assets

    59,376     83,891     71,278     60,705  

Long term debt, including current portion

    7,456     3,111     10,620     10,560  

Total stockholders' equity

    43,095     68,960     49,827     36,781  

71


Table of Contents


MANAGEMENT'S DISCUSSION AND ANALYSIS
OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

        You should read the following discussion and analysis of our financial condition and results of operations together with our consolidated financial statements and related notes appearing elsewhere in this prospectus. Some of the information contained in this discussion and analysis or set forth elsewhere in this prospectus, including information with respect to our plans and strategy for our business and related financing, includes forward-looking statements that involve risks and uncertainties. As a result of many important factors, including those factors set forth in the "Risk Factors" section of this prospectus, our actual results could differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis. See "Special Note Regarding Forward-Looking Statements."

Overview

        We are a medical technology company that uses our proprietary iFit Image-to-Implant technology platform to develop, manufacture and sell joint replacement implants that are individually sized and shaped, which we refer to as customized, to fit each patient's unique anatomy. The worldwide market for joint replacement products is approximately $15 billion annually and growing, and we believe our iFit technology platform is applicable to all major joints in this market. We believe we are the only company offering a broad line of customized knee implants designed to restore the natural shape of a patient's knee. We have sold a total of more than 30,000 knee implants in the United States and Europe. In recent clinical studies, iTotal CR, our cruciate-retaining total knee replacement implant and best-selling product, demonstrated superior clinical outcomes, including better function and greater patient satisfaction compared to traditional, off-the-shelf implants. We recently initiated the limited launch of iTotal PS, our posterior-stabilized total knee replacement implant which addresses the largest segment of the knee replacement market. We expect to submit an application for clearance of iTotal Hip, our first customized hip replacement implant, with the U.S. Food and Drug Administration, or FDA, in 2015.

        Our iFit technology platform comprises three key elements:

We believe our iFit technology platform enables a scalable business model that greatly lowers our inventory requirements, reduces the amount of working capital required to support our operations and allows us to launch new products and product improvements more rapidly, as compared to manufacturers of traditional, off-the-shelf implants.

        We own or exclusively in-license a total of approximately 470 issued patents and pending patent applications that cover customized implants and patient-specific instrumentation, or PSI, for all major joints and other elements of our iFit technology platform. Our intellectual property portfolio includes 112 issued United States patents, 51 patents issued in countries outside the United States, and 309 patent applications worldwide. We believe that our patent portfolio provides a significant barrier to entry.

72


Table of Contents

        All of our knee replacement products have been cleared by the FDA under the premarket notification process of Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the FDCA, and have received certification to CE Mark. We market our products to orthopedic surgeons, hospitals and other medical facilities and patients. We have 87 employees engaged in the sales and marketing of our products in the United States, Germany and the United Kingdom. We use independent sales representatives and distributors to complement our own sales and marketing efforts in these and other markets.

        We were incorporated in Delaware and commenced operations in 2004. We introduced our iUni and iDuo partial knee replacement products in 2007 and our iTotal CR in 2011. For the year ended December 31, 2014 we generated revenue of $48.2 million from product sales, representing a 39% increase over the prior year. For the three months ended March 31, 2015 we generated revenue of $14.7 million from product sales, representing a 36% increase over the three months ended March 31, 2014.

Financial update

        We expect our gross margin to decline for the three months ended June 30, 2015 as compared to the three months ended March 31, 2015, primarily as the result of our hiring of additional manufacturing personnel in advance of production volume increases and increased overtime pay. We believe we will be able to reduce these effects on our gross margins in subsequent periods as production volume increases and we maintain better balance of production employee hiring and work schedules with production needs. Another factor that we expect will contribute to the anticipated gross margin decrease for the three months ended June 30, 2015, as compared to the three months ended March 31, 2015, is increased labor costs associated with the fulfillment of orders for our iTotal PS knee implants, which are in limited launch and are more labor-intensive than our other products with respect to the process of converting CT scans to patient-specific implants. We believe we will be able to reduce the labor costs associated with production of our iTotal PS knee implants when we complete the development of, and receive 510(k) clearance to use, our improved design software. We expect we will complete the development of this software and submit it for 510(k) clearance in the fourth quarter of 2015 and that these labor costs will continue to affect our gross margin until the improved design software is implemented.

Components of our results of operations

        The following is a description of factors that may influence our results of operations, including significant trends and challenges that we believe are important to an understanding of our business and results of operations.

Revenue

        Our revenue is generated from sales to hospitals and other medical facilities that are served through a direct sales force, independent sales representatives and distributors in the United States, the United Kingdom, Austria, Germany, Ireland, Switzerland, Hong Kong and Singapore. In order for surgeons to use our products, the medical facilities where these surgeons treat patients typically require us to enter into purchasing contracts. The process of negotiating a purchasing contract can be lengthy and time-consuming, require extensive management time and may not be successful.

        Revenue from sales of our products fluctuates principally based on the selling price of the joint replacement product, as the sales price of our products varies among hospitals and other medical facilities. In addition, our revenue may fluctuate based on the product sales mix and mix of sales by geography. Our revenue from international sales can be significantly impacted by fluctuations in foreign currency exchange rates, as our sales are denominated in the local currency in the countries in which we sell our products. We expect our revenue to fluctuate from quarter-to-quarter

73


Table of Contents

due to a variety of factors, including seasonality, as we have historically experienced lower sales in the summer months and around year-end, the timing of the introduction of our new products, if any, and the impact of the buying patterns and implant volumes of medical facilities.

        In April 2015, we entered into a fully paid up, worldwide license agreement with Wright Medical Group, Inc., or Wright Group, and its wholly owned subsidiary Wright Medical Technology, Inc., or Wright Technology and collectively with Wright Group, Wright Medical. Under the terms of this license agreement, we granted a perpetual, irrevocable, non-exclusive license to Wright Medical to use patient specific instrument technology covered by our patents and patent applications with off-the-shelf implants in the foot and ankle. This license does not extend to patient-specific implants. This license agreement provided for a single lump-sum payment by Wright Medical to us of mid-single digit millions of dollars upon entering into the license agreement, which has been paid. This license agreement will expire upon the expiration of the last to expire of our patents and patent applications licensed to Wright Medical, which currently is expected to occur in 2030.

        In April 2015, we entered into a worldwide license agreement with MicroPort Orthopedics Inc., or MicroPort, a wholly owned subsidiary of MicroPort Scientific Corporation. Under the terms of this license agreement, we granted a perpetual, irrevocable, non-exclusive license to MicroPort to use patient specific instrument technology covered by our patents and patent applications with off-the-shelf implants in the knee. This license does not extend to patient-specific implants. This license agreement provides for the payment to us of a fixed royalty at a high single to low double digit percentage of net sales on patient-specific instruments and associated implant components in the knee, including MicroPort's Prophecy patient specific instruments used with its Advance and Evolution implant components. This license agreement also provided for a single lump-sum payment by MicroPort to us of low-single digit millions of dollars upon entering into the license agreement, which has been paid. This license agreement will expire upon the expiration of the last to expire of our patents and patent applications licensed to MicroPort, which currently is expected to occur in 2029. We cannot be certain as to the timing or amount of payment of any royalties under this license agreement. We do not at this time anticipate that any such royalties that may be paid to us pursuant to this license agreement will be material in amount, including relative to our revenues.

        We do not believe that a termination of either the license agreement with MicroPort or the license agreement with Wright Medical would have a material impact on our business, including on our revenues or results of operations.

Cost of revenue

        We produce all of our CAD designs in-house and use them to direct all of our product manufacturing efforts. We manufacture all of our patient-specific instruments, or iJigs, in our facilities in Burlington and Wilmington, Massachusetts. We also make in our facilities the majority of the tibial components used in our implants. We outsource the production of the remainder of the tibial components and the manufacture of femoral and other implant components to third-party suppliers. Our suppliers make our customized implant components using the CAD designs we supply. Cost of revenue consists primarily of costs of raw materials, manufacturing personnel, manufacturing supplies, inbound freight and manufacturing overhead and depreciation expense.

        We calculate gross margin as revenue less cost of revenue divided by revenue. Our gross margin has been and will continue to be affected by a variety of factors, including primarily volume of units produced, mix of product components manufactured by us versus sourced from third parties, our average selling price, the geographic mix of sales and product sales mix.

        Other than as discussed above, we expect our gross margin to expand over time to the extent we are successful in reducing our manufacturing costs per unit and increasing our manufacturing

74


Table of Contents

efficiency as sales volume increases. We believe that areas of opportunity to expand our gross margins in the future, if and as the volume of our product sales increases, include the following:

We also plan to explore other opportunities to reduce our manufacturing costs. However, these and the above opportunities may not be realized. In addition, our gross margin may fluctuate from period to period.

Operating expenses

        Our operating expenses consist of sales and marketing, research and development and general and administrative expenses. Personnel costs are the most significant component of operating expenses and consist of salaries, benefits, stock-based compensation and sales commissions.

        Sales and marketing.    Sales and marketing expense consists primarily of personnel costs, including salary, employee benefits and stock-based compensation for personnel employed in sales, marketing, customer service, medical education and training, as well as investments in surgeon training programs, industry events and other promotional activities. In addition, our sales and marketing expense includes sales commissions and bonuses, generally based on a percentage of sales, to our sales managers, direct sales representatives and independent sales representatives. Recruiting, training and retaining productive sales representatives and educating surgeons about the benefits of our products are required to generate and grow revenue. We expect sales and marketing expense to significantly increase as we build up our sales and support personnel and expand our marketing efforts. Our sales and marketing expense may fluctuate from period to period due to the seasonality of our revenue and the timing and extent of our expenses.

        Research and development.    Research and development expense consists primarily of personnel costs, including salary, employee benefits and stock-based compensation for personnel employed in research and development, regulatory and clinical areas. Research and development expense also includes costs associated with product design, product refinement and improvement efforts before and after receipt of regulatory clearance, development prototypes, testing, clinical study programs and regulatory activities, contractors and consultants, and equipment and software to support our development. As our revenue increases, we will also incur additional expenses for revenue share payments to our past and present scientific advisory board members, including our Chief Executive Officer. We expect research and development expense to increase in absolute dollars as we develop new products to expand our product pipeline, add research and development personnel and conduct clinical activities.

75


Table of Contents

        General and administrative.    General and administrative expense consists primarily of personnel costs, including salary, employee benefits and stock-based compensation for our administrative personnel that support our general operations, including executive management, general legal and intellectual property, finance and accounting, information technology and human resources personnel. General and administrative expense also includes outside legal costs associated with intellectual property and general legal matters, financial audit fees, insurance, fees for other consulting services, depreciation expense, freight, medical device tax and facilities expense.

        We expect our general and administrative expense will increase in absolute dollars as we increase our headcount and expand our infrastructure to support growth in our business and our operations as a public company, as well as in connection with the move of our primary manufacturing facility from Bedford to Wilmington in 2015. We anticipate increased expenses associated with being a public company will include increases in audit, legal, regulatory and tax-related services associated with maintaining compliance with exchange listing and SEC requirements, director and officer insurance premiums and investor relations costs. As our revenue increases we also will incur additional expenses for freight and medical device tax. Our general and administrative expense may fluctuate from period to period due to the timing and extent of the expenses.

Other income (expense), net

        Other income (expense), net consists primarily of interest expense and amortization of debt discount associated with our term loans and realized gains (losses) from foreign currency transactions. The effect of exchange rates on our foreign currency-denominated asset and liability balances are recorded in other income (expense) and are recorded as foreign currency translation adjustments in the consolidated statements of comprehensive loss.

Income tax provision

        Income tax provision consists primarily of a provision for income taxes in foreign jurisdictions in which we conduct business. We maintain a full valuation allowance for deferred tax assets including net operating loss carryforwards and research and development credits and other tax credits.

76


Table of Contents

Consolidated results of operations

Comparison of the three months ended March 31, 2014 and 2015

        The following table sets forth our results of operations expressed as dollar amounts, percentage of total revenue and quarter-to-quarter change (in thousands):

 
  2014   2015   2014 vs 2015  
Three months ended March 31,
  Amount   As a % of
Total
Revenue
  Amount   As a % of
Total
Revenue
  $
Change
  %
Change
 

Revenue

  $ 10,799     100 % $ 14,700     100 % $ 3,901     36 %

Cost of revenue

    7,512     70     9,388     64     1,876     25  

Gross profit

    3,287     30     5,312     36     2,025     62  

Operating expenses:

   
 
   
 
   
 
   
 
   
 
   
 
 

Sales and marketing

    8,379     78     9,579     65     1,200     14  

Research and development

    3,578     33     4,016     27     438     12  

General and administrative

    3,948     37     5,780     39     1,832     46  

Total operating expenses    

    15,905     147     19,375     132     3,470     22  

Loss from operations

    (12,618 )   (117 )   (14,063 )   (96 )   (1,445 )   (11 )

Total other expenses

    (27 )   0     (184 )   (1 )   (157 )   (581 )

Loss before income taxes

    (12,645 )   (117 )   (14,247 )   (97 )   (1,602 )   (13 )

Income tax provision

    8     0     10     0     2     25  

Net loss

  $ (12,653 )   (117 ) $ (14,257 )   (97 ) $ (1,604 )   (13 )

        Revenue.    Revenue was $14.7 million for the three months ended March 31, 2015 compared to $10.8 million for the three months ended March 31, 2014, an increase of $3.9 million, or 36%, due principally to increased sales of our first primary total knee product, iTotal CR, within the United States as well as increased sales of our other products generally within the United States.

        The following table sets forth, for the periods indicated, our product revenue by geography expressed as U.S. dollar amounts, percentage of product revenue and year-over-year change (in thousands):

 
  2014   2015   2014 vs 2015  
Three months ended March 31,
  Amount   As a % of
Product
Revenue
  Amount   As a % of
Product
Revenue
  $
Change
  %
Change
 

United States

  $ 6,952     64 % $ 10,313     70 % $ 3,361     48 %

Rest of world

    3,847     36     4,387     30     540     14  

Product revenue

  $ 10,799     100   $ 14,700     100   $ 3,901     36  

        Revenue in the United States is generated through our direct sales force and independent sales representatives. Revenue outside the United States is generated through our direct sales force and distributors. The percentage of total revenue generated in the United States increased from 64% for the three months ended March 31, 2014 to 70% for the three months ended March 31, 2015. We believe the lower level of US revenue as a percentage of product revenue in the three months ended March 31, 2014 was due to the acceleration of surgical cases in 2013 in anticipation of the implementation of the PPACA.

        Cost of revenue, gross profit and gross margin.    Cost of revenue was $9.4 million for the three months ended March 31, 2015 compared to $7.5 million for the three months ended March 31, 2014, an increase of $1.9 million or 25%. The increase was due primarily to an increase in production and personnel costs associated with the increase in sales volume. Gross profit increased $2.0 million, or 62%, to $5.3 million, for the three months ended March 31, 2015 as

77


Table of Contents

compared to $3.3 million for the three months ended March 31, 2014 due to higher sales volume, while our gross margin increased 6 percentage points to 36% from 30%. This increase in gross margin was driven primarily by additional volume related material discounts and better absorption of manufacturing overhead.

        Sales and marketing.    Sales and marketing expense was $9.6 million for the three months ended March 31, 2015 compared to $8.4 million for the three months ended March 31, 2014, an increase of $1.2 million or 14%. The increase was due primarily to a $1.1 million increase in personnel costs as a result of our hiring of additional direct sales representatives and increases in commissions as a result of the increase in sales volume, and a $0.1 million increase in marketing and other expenses. Sales and marketing expense decreased as a percentage of total revenue to 65% for the three months ended March 31, 2015 from 78% for the three months ended March 31, 2014.

        Research and development.    Research and development expense was $4.0 million for the three months ended March 31, 2015 compared to $3.6 million for the three months ended March 31, 2014, an increase of $0.4 million or 12%. The increase was due primarily to a $0.4 million increase in personnel costs and a $0.2 million increase in revenue share expenses, offset in part by a $0.3 million decrease in costs for consultants, testing and prototype development. Research and development expenses decreased as a percentage of total revenue to 27% for the three months ended March 31, 2015 from 33% for the three months ended March 31, 2014.

        General and administrative.    General and administrative expense was $5.8 million for the three months ended March 31, 2015 compared to $3.9 million for the three months ended March 31, 2014, an increase of $1.8 million or 46%. The increase was due primarily to a $0.7 million increase in personnel costs, a $0.7 million increase in freight expense, a $0.4 million increase in consulting services and a $0.4 million increase in various other expenses, offset in part by a decrease of $0.4 million in general and patent legal fees. General and administrative expenses increased as a percentage of total revenue to 39% for the three months ended March 31, 2015 from 37% for the three months ended March 31, 2014.

        Other expense, net.    Other expense, net was $184,000 for the three months ended March 31, 2015 compared to $27,000 for the three months ended March 31, 2014, an increase of $157,000, or 581%. The increase was primarily due to an increase in interest expense associated with our long-term debt of $10.3 million.

        Income taxes.    Income tax provision was $10,000 for the three months ended March 31, 2015 compared to $8,000 for the three months ended March 31, 2014. We continue to generate losses for U.S. federal and state tax purposes and have net operating loss carryforwards creating a deferred tax asset. We maintain a full valuation allowance for deferred tax assets.

78


Table of Contents

Comparison of the years ended December 31, 2013 and 2014

        The following table sets forth our results of operations expressed as dollar amounts, percentage of total revenue and year-over-year change (in thousands):

 
  2013   2014   2013 vs 2014  
Year ended December 31,
  Amount   As a % of
Total
Revenue
  Amount   As a % of
Total
Revenue
  $
Change
  %
Change
 

Revenue

  $ 34,597     100 % $ 48,186     100 % $ 13,589     39 %

Cost of revenue

    27,283     79     30,638     64     3,355     12  

Gross profit

    7,314     21     17,548     36     10,234     140  

Operating expenses:

   
 
   
 
   
 
   
 
   
 
   
 
 

Sales and marketing

    26,149     76     31,103     65     4,954     19  

Research and development

    13,779     40     15,107     31     1,328     10  

General and administrative

    14,693     42     16,763     35     2,070     14  

Total operating expenses    

    54,621     158     62,973     131     8,352     15  

Loss from operations

    (47,307 )   (137 )   (45,425 )   (94 )   1,882     4  

Total other expenses

    (553 )   (2 )   (256 )   (1 )   297     54  

Loss before income taxes

    (47,860 )   (139 )   (45,681 )   (95 )   2,179     5  

Income tax provision

    29     0     41     0     12     41  

Net loss

  $ (47,889 )   (139 ) $ (45,722 )   (95 ) $ 2,167     5  

        Revenue.    Revenue was $48.2 million for the year ended December 31, 2014 compared to $34.6 million for the prior year, an increase of $13.6 million, or 39%, due principally to increased sales of our first primary total knee product, iTotal CR, and increased sales of our products generally outside the United States.

        The following table sets forth, for the periods indicated, our product revenue by geography expressed as U.S. dollar amounts, percentage of product revenue and year-over-year change (in thousands):

 
  2013   2014   2013 vs 2014  
Year ended December 31,
  Amount   As a % of
Product
Revenue
  Amount   As a % of
Product
Revenue
  $
Change
  %
Change
 

United States

  $ 24,681     71 % $ 34,332     71 % $ 9,651     39 %

Rest of world

    9,916     29     13,854     29     3,938     40  

Product revenue

  $ 34,597     100   $ 48,186     100   $ 13,589     39  

        Revenue in the United States is generated through our direct sales force and independent sales representatives. Revenue outside of the United States is generated through our direct sales force and distributors. The revenue allocation or geographic split between United States and rest of world has remained relatively consistent over both periods.

        Cost of revenue, gross profit and gross margin.    Cost of revenue was $30.6 million for the year ended December 31, 2014 compared to $27.3 million for the year ended December 31, 2013, an increase of $3.3 million or 12%. The increase was due primarily to an increase in production costs and manufacturing supplies associated with the increase in sales volume. Gross profit increased $10.2 million, or 140%, to $17.5 million, in 2014 as compared to $7.3 million in 2013 due to higher sales volume, while our gross margin increased 1,500 basis points to 36% from 21% in 2013. This increase in gross margin was driven by additional volume related material discounts and decreased costs of iJigs and tibial components as a result of the increasing vertical integration of

79


Table of Contents

our manufacturing processes. The additional unit production volume improved our gross margin as a result of better absorption of manufacturing overhead.

        Sales and marketing.    Sales and marketing expense was $31.1 million for the year ended December 31, 2014 compared to $26.1 million for the year ended December 31, 2013, an increase of $5.0 million or 19%. The increase was due primarily to a $3.9 million increase in personnel costs as a result of our hiring of additional direct sales representatives and increases in commissions as a result of the increase in sales volume, and a $1.1 million increase in marketing and other expenses. Sales and marketing expense decreased as a percentage of total revenue to 65% in 2014 from 76% in 2013.

        Research and development.    Research and development expense was $15.1 million for the year ended December 31, 2014 compared to $13.8 million for the year ended December 31, 2013, an increase of $1.3 million or 10%. The increase was due primarily to a $0.7 million increase in revenue share expenses and a $0.7 million increase in costs for consultants, testing and prototype development, offset in part by a $0.1 million decrease in various other expenses. Research and development expenses decreased as a percentage of total revenue to 31% in 2014 from 40% in 2013.

        General and administrative.    General and administrative expense was $16.8 million for the year ended December 31, 2014 compared to $14.7 million for the year ended December 31, 2013, an increase of $2.1 million or 14%. The increase was due primarily to a $0.9 million increase in general and patent legal fees, a $1.0 million increase in personnel costs, and a $0.8 million charge for a settlement and fully paid-up patent license agreement, offset in part by a decrease of $0.6 million in various other expenses. General and administrative expenses decreased as a percentage of total revenue to 35% in 2014 from 42% in 2013.

        Other expense, net.    Other expense, net was $0.3 million for the year ended December 31, 2014 compared to $0.6 million for the year ended December 31, 2013, a decrease of $0.3 million, or 54%. The decrease was primarily due to a decrease in interest expense associated with our long-term debt of $0.5 million, partially offset by a $0.2 million loss due to the effect of changes in foreign currency exchange rates on foreign operations.

        Income taxes.    Income tax provision was $41,000 for the year ended December 31, 2014 compared to $29,000 for the year ended December 31, 2013. The change in income tax expense was due primarily to a provision for foreign income taxes. We continue to generate losses for U.S. federal and state tax purposes and have net operating loss carryforwards creating a deferred tax asset. We maintain a full valuation allowance for deferred tax assets.

Liquidity, capital resources and plan of operations

Sources of liquidity and funding requirements

        Since our inception in June 2004, we have financed our operations through private placements of preferred stock, bank debt and convertible debt financings, equipment purchase loans and, beginning in 2007, product revenue. Our product revenue has continued to grow from year-to-year; however, we have not yet attained profitability and continue to incur operating losses. As of March 31, 2015, we had an accumulated deficit of $282.4 million.

        Since 2004, we have raised an aggregate of $330 million from the sale of preferred stock and the exercise of preferred stock warrants and common stock warrants and options.

        In June 2011, we entered into a $1.4 million secured term loan facility with the Massachusetts Development Financing Agency, referred to as the MDFA facility, to finance equipment purchases, of which $0.75 million was outstanding as of December 31, 2014. We are scheduled to make monthly interest and principal payments for the MDFA facility through July 2017. For further

80


Table of Contents

information regarding this facility, see "—Credit facilities—Massachusetts Development Finance Agency" below.

        In May 2014, we made the final payment on a $15 million term loan facility with Western Technology Investment under which we originally borrowed $10 million in 2011.

        In November 2014, we entered into a senior secured $25 million loan and security agreement with Silicon Valley Bank and Oxford Finance, LLC, referred to as the SVB/Oxford Agreement, consisting of a revolving line of credit, or the Revolving Line, of up to $5 million and commitments for two $10 million term loans. In November 2014, in connection with our entry into the SVB/Oxford Agreement, we drew down the first $10 million term loan, referred to as the SVB/Oxford Term Loan A. We are eligible to draw down the second $10 million term loan on or prior to November 7, 2015 upon meeting certain conditions. As of March 31, 2015, we did not have any revolving loans outstanding under the Revolving Line, with $5 million available for borrowing, subject to our meeting certain conditions, based on our borrowing base under the Revolving Line. We believe our need for the availability of the second $10 million term loan and loans under the Revolving Line will be reduced significantly following this offering. For further information regarding this facility, see "—Credit facilities—SVB/Oxford" below.

        We expect to incur substantial expenditures in the foreseeable future in connection with the following:

        In addition, following this offering, our general and administrative expense will increase due to the additional operational and reporting costs associated with our expanded operations and being a public company.

        We anticipate that following this offering our principal sources of funds will be revenue generated from the sales of our products, borrowings under our credit facility and revenues that we may generate in connection with licensing our intellectual property. Our credit facility with SVB/Oxford is our only committed external source of funds. We will need to generate significant additional revenue to achieve and maintain profitability, and even if we achieve profitability, we cannot be sure that we will remain profitable for any substantial period of time. It is also possible that we may allocate significant amounts of capital toward products or technologies for which market demand is lower than anticipated and, as a result, abandon such efforts. If we are unable to obtain adequate financing or financing on terms satisfactory to us when we require it, or if we expend capital on projects that are not successful, our ability to continue to support our business growth and to respond to business challenges could be significantly limited, and we may even have to scale back our operations. Our failure to become and remain profitable could impair our ability to raise capital, expand our business, maintain our research and development efforts or continue to fund our operations.

81


Table of Contents

        We may need to engage in equity or debt financings to secure additional funds, including the funds required to pay our existing indebtedness at maturity. We may not be able to obtain additional financing on terms favorable to us, or at all. In addition, the negative covenants, pledge of our assets as collateral and negative pledge with respect to our intellectual property under the SVB/Oxford Agreement could limit our ability to obtain additional debt financing. To the extent that we raise additional capital through the future sale of equity or debt, the ownership interest of our stockholders will be diluted. The terms of these future equity or debt securities may include liquidation or other preferences that adversely affect the rights of our existing common stockholders or involve negative covenants that restrict our ability to take specific actions, such as incurring additional debt or making capital expenditures.

        At March 31, 2015, we had cash and cash equivalents of $22.9 million and $4.4 million in restricted cash allocated to lease deposits and funding a contractual commitment to expand our business in Asia, which we refer to as our Asia strategy. See "Certain Relationships and Related-Persons Transactions" for a description of our Asia strategy. Based on our current operating plan, we expect that the net proceeds from this offering, together with our existing cash and cash equivalents as of March 31, 2015, funding available under the SVB/Oxford Agreement and anticipated revenue from operations, including from projected sales of our products, will enable us to fund our operating expenses and capital expenditure requirements and pay our debt service as it becomes due for at least the next 24 months. We have based this expectation on assumptions that may prove to be wrong, such as the revenue that we expect to generate from the sale of our products, the gross profit we expect to generate from those revenues and the availability of additional funding under the SVB/Oxford Agreement, and we could use our capital resources sooner than we expect.

Cash flows

        The following table sets forth a summary of our cash flows for the periods indicated, as well as the year-over-year change between periods (in thousands):

 
  Year ended December 31,   Three months ended March 31,  
 
  2013   2014   $ Change   % Change   2014   2015   $ Change   % Change  

Net cash (used in) provided by:

                                                 

Operating activities

  $ (46,826 ) $ (43,539 ) $ 3,287     7 % $ (11,000 ) $ (13,657 ) $ (2,657 )   (24 )%

Investing activities

    (8,457 )   (1,506 )   6,951     82     104     (1,359 )   (1,463 )   (1407 )

Financing activities

    69,603     29,337     (40,266 )   (58 )   (1,347 )   58     1,405     104  

Effect of exchange rate on cash

    167     (613 )   (780 )   (467 )   8     (3 )   (11 )   (138 )

Total

  $ 14,487   $ (16,321 ) $ (30,808 )   (213 ) $ (12,235 ) $ (14,961 ) $ (2,726 )   (22 )

        Cash used in operating activities.    Net cash used in operating activities was $13.7 million for the three months ended March 31, 2015 and $11.0 million for the three months ended March 31, 2014, primarily reflecting the net losses during the periods of $14.3 million for the three months ended March 31, 2015 and $12.7 million for the three months ended March 31, 2014. The net cash used in operating activities for the three months ended March 31, 2015 was affected by changes in our operating assets and liabilities, including an increase of $2.6 million in accounts payable and accrued liabilities as well as non-cash stock-based compensation and depreciation totaling $1.6 million, which were offset in part by an increase in our outstanding prepaid and other assets of $1.6 million, an increase in our accounts receivable of $0.7 million and an increase in our inventory of $1.3 million. The net cash used in operating activities for the three months ended March 31, 2014 was affected by changes in our operating assets and liabilities, including non-cash stock-based compensation and depreciation totaling $0.9 million, a decrease in our inventory of $0.6 million and an increase in accounts payable and accrued liabilities of $0.5 million, which was offset in part by an increase in accounts receivable of $0.3 million.

82


Table of Contents

        Net cash used in operating activities was $43.5 million for the year ended December 31, 2014 and $46.8 million for the year ended December 31, 2013, primarily reflecting the net losses during the periods of $45.7 million for the year ended December 31, 2014 and $47.9 million for the year ended December 31, 2013. The net cash used in operating activities for the year ended December 31, 2014 was affected by changes in our operating assets and liabilities, including an increase of $2.1 million in accounts payable and accrued liabilities as well as non-cash stock-based compensation and depreciation totaling $4.6 million, which were offset in part by an increase in our outstanding prepaid and other assets of $0.3 million, an increase in our accounts receivable of $2.9 million and an increase in our inventory of $1.1 million. The net cash used in operating activities for the year ended December 31, 2013 was affected by changes in our operating assets and liabilities, including non-cash stock-based compensation and depreciation totaling $3.8 million, which was offset in part by an increase in our accounts receivable of $2.1 million and an increase in our inventory of $1.4 million.

        Net cash (used in) provided by investing activities.    Net cash used in investing activities was $1.4 million for the three months ended March 31, 2015 and net cash provided by investing activities was $0.1 million for the three months ended March 31, 2014, a decrease of $1.5 million. These amounts primarily reflect less cash used for purchases of property and equipment and a decrease in restricted cash balances. We anticipate that the amount of cash used in investing activities will increase in 2015 as we purchase additional property and equipment to manufacture more components in our own facility.

        Net cash used in investing activities was $1.5 million for the year ended December 31, 2014 and $8.5 million for the year ended December 31, 2013, a decrease of $7.0 million. These amounts primarily reflect less cash used for purchases of property and equipment and a decrease in restricted cash balances.

        Net cash (used in) provided by financing activities.    Net cash provided by financing activities was $58,000 for the three months ended March 31, 2015 and net cash used by financing activities was $1.3 million for the three months ended March 31, 2014, a decrease of $1.4 million. The decrease was due to a $1.1 million decrease in debt payments and a $0.3 million decrease in proceeds from the issuance of common and preferred stock.

        Net cash provided by financing activities was $29.3 million for the year ended December 31, 2014 and $69.6 million for the year ended December 31, 2013, a decrease of $40.3 million. The decrease was due to a $52.0 million decrease in proceeds from the issuance of preferred stock, partially offset by $10.0 million in debt financing and a $2.1 million decrease in debt payments between the two periods. We issued 2.8 million shares of Series E-1 preferred stock during the year ended December 31, 2014 and 9.3 million shares of Series E-1 preferred stock during the year ended December 31, 2013.

Credit facilities

SVB/Oxford

        On November 7, 2014, or the effective date, we and ImaTx entered into a senior secured $25 million loan and security agreement with Silicon Valley Bank and Oxford Finance, LLC, which we refer to as the SVB/Oxford Agreement, consisting of a revolving line of credit of up to $5 million (subject to availability under the borrowing base and the satisfaction of other funding conditions), or the Revolving Line, and commitments for two $10 million term loans, or the SVB/Oxford Term Loans. At the time we entered into the SVB/Oxford Agreement, we borrowed the first $10 million term loan, or the SVB/Oxford Term Loan A, and issued the lenders warrants to purchase 33,481 shares of our common stock. We are eligible to borrow a second term loan in a principal amount of $10 million, referred to as the SVB/Oxford Term Loan B, on or prior to November 7, 2015 upon

83


Table of Contents

meeting certain conditions, including our being able to make certain agreed upon representations and warranties to the lenders and a determination by the lenders, in their sole discretion, that there has been no occurrence of any material adverse change, as defined in the SVB/Oxford Agreement, or any material deviation from the annual financial projections provided by us and accepted by the lenders. Under the SVB/Oxford Agreement, we are required to deliver financial projections in a month-to-month format to the lenders on an annual basis and such lenders may, in their discretion, object to or accept such projections. We prepare our financial projections for this purpose in what we believe is a reasonable manner, including by taking into account trends reported by our sales and marketing team, macroeconomic trends and other relevant data. While we cannot be certain we will achieve our financial projections, we believe that we prepare them in a reasonable, good faith manner. At the time of a request to borrow the SVB/Oxford Term Loan B, the lenders may, in their discretion, determine that there has been a material deviation from the most recent financial projections accepted by the lenders, in which case we would not be entitled to borrow the SVB/Oxford Term Loan B. There can be no assurance that we will be able to borrow the additional $10 million term loan. In the event that we borrow the additional $10 million term loan, we will be obligated to issue warrants to purchase an additional 33,481 shares of our common stock to the lenders under the SVB/Oxford Agreement.

        Unless earlier terminated by us or accelerated by the lenders, the Revolving Line terminates on November 7, 2019, with all outstanding revolving credit borrowings and associated interest becoming due and payable upon such termination. Our ability to borrow under the Revolving Line is subject to a borrowing base, calculated as 85% (or such lower percent as Silicon Valley Bank may determine in accordance with the SVB/Oxford Agreement) of eligible accounts receivable. Borrowings under the Revolving Line bear interest at a floating per annum rate equal to the prime rate. Interest on the Revolving Line is payable monthly. In addition to interest, we are obligated to pay a $0.25 million fee for the Revolving Line, which is payable in annual increments of $50,000 due on the effective date and each anniversary of the effective date. We amortize this fee ratably over the term of the Revolving Line. Further, we are obligated to pay a termination fee of $0.1 million if we elect to terminate the Revolving Line prior to the first anniversary of the effective date, or $50,000 if we elect to terminate the Revolving Line between the first and third anniversaries of the effective date, provided that no termination fee will be payable if the Revolving Line is replaced with a new facility or an amended and restated facility from Silicon Valley Bank.

        Unless earlier prepaid by us or accelerated by the lenders, the SVB/Oxford Term Loans will each mature on November 1, 2019, referred to as the Term Loan Maturity Date. The SVB/Oxford Term Loan A bears interest at a fixed rate of 7.25% per annum, which rate was determined as the prime rate on the original date of funding, plus 4.0%. To the extent we borrow the SVB/Oxford Term Loan B, such term loan will accrue interest at a fixed per annum rate equal to the prime rate on the date of funding, plus 4.0%. Interest on each of the SVB/Oxford Term Loans is payable monthly in arrears. If we achieve a revenue milestone of $76 million, measured on a trailing 12 month basis for the 12 months ending May 31, 2016, and no event of default has occurred, only interest, and no principal, will be payable for the first 36 months following the effective date. If we do not achieve the revenue milestone, only interest, and no principal, will be payable for the first 24 months following the effective date. After the interest only period, we are required to make equal monthly payments of principal and interest, in arrears, for the remaining term until maturity. In addition to interest, we are obligated to make a final payment fee equal to the original principal amount of the applicable SVB/Oxford Term Loan, multiplied by 7%, on the earliest to occur of the Term Loan Maturity Date, the acceleration of any term loan, or the prepayment of a term loan. Further, with respect to any term loan subject to prepayment prior to the Term Loan Maturity Date, whether by mandatory or voluntary prepayment or acceleration, we will be required to make a prepayment fee equal to 3% of principal amount being prepaid, if such prepayment is made on or prior to the first anniversary of the funding date of the applicable term loan, 2% of the principal amount being

84


Table of Contents

prepaid, if such prepayment is made after the first anniversary but before the second anniversary of the funding date of the applicable term loan, or 1% of the principal amount being prepaid, if such prepayment is made after the second anniversary of the funding date of the applicable term loan.

        Our obligations under the SVB/Oxford Agreement are secured by a first-lien security interest over substantially all of our and ImaTx's assets, other than intellectual property, with respect to which we and ImaTx granted a negative pledge. The SVB/Oxford Agreement contains negative covenants restricting our activities, including limitations on dispositions, mergers or acquisitions, incurring indebtedness or liens, paying dividends or making investments and certain other business transactions. There are no financial covenants associated with the SVB/Oxford Agreement. Our obligations under the SVB/Oxford Agreement are subject to acceleration upon the occurrence of specified events of default, including a material adverse change in our business, operations or financial or other condition. Also, immediately upon the occurrence and during the continuance of an event of default, all obligations outstanding under the SVB/Oxford Agreement shall accrue interest at a fixed rate equal to the per annum rate that is otherwise applicable thereto plus 5%.

Massachusetts Development Finance Agency

        In June 2011, we entered into a $1.4 million term loan facility with the Massachusetts Development Finance Agency, or MDFA, for the purposes of financing equipment purchases. The MDFA facility, which is subordinated to the SVB/Oxford Term Loans and Revolving Line, is secured on a second-lien basis by certain of our tangible assets. At the time we entered into the MDFA facility, we borrowed the first tranche of $0.6 million, with the remaining funds to be borrowed over the following 18 months. To date, we have borrowed a total of $1.4 million of the available commitments under the facility, of which $0.75 million in loans were outstanding as of December 31, 2014 and $0.7 million as of March 31, 2015. Loans under the MDFA facility bear interest at a fixed rate of 6.5% per annum. Interest is payable monthly in arrears. Beginning on January 1, 2013, we began making payments of principal and interest in 66 equal monthly installments. In connection with our entry into the MDFA facility, we issued warrants to MDFA to purchase 16,000 shares of our Series D preferred stock.

Contractual obligations and commitments

        The following table summarizes our outstanding contractual obligations as of March 31, 2015 (in thousands).

 
  Payment Due by Period  
Contractual Obligations
  Total   Less than
1 year
  Years 2 to 3   Years 4 to 5   After
5 years
 

Senior Secured debt(1)

  $ 10,692   $ 211   $ 3,844   $ 6,637   $  

Operating lease obligations—real estate(2)

    5,274     1,629     2,117     744     784  

Interest payments on long-term debt(3)

    3,121     762     1,283     1,076      

Other(4)

    2,005     362     1,304     179     160  

Total(5)

  $ 21,092   $ 2,964   $ 8,548   $ 8,636   $ 944  

(1)
Represents amounts payable under the SVB/Oxford Agreement and MDFA facility, assuming that we do not satisfy the $76 million revenue milestone under the SVB/Oxford Agreement, thereby triggering repayment of principal under the facility beginning 24 months after the funding date of the SVB/Oxford Term Loan A in November 2016. See "—Liquidity, capital resources and plan of operations—Credit facilities" for further detail regarding the milestone.
(2)
Represents operating lease commitments for office and manufacturing space in Bedford, Burlington and Wilmington, Massachusetts.
(3)
Represents expected interest payments on senior secured debt.
(4)
Represents amounts payable under our product royalty agreements, operating leases for office equipment and contracts for marketing exhibit services and a software development collaboration project.
(5)
This table does not include: (a) revenue share obligations to past and present members of our scientific advisory board and our Chief Executive Officer, as the amounts of such payments are not known with certainty; and (b) contracts that are entered into in the ordinary course of business that are not material in the aggregate in any period presented above. See "—Revenue share agreements" and "Certain Relationships and Related-Persons Transactions—Revenue share agreement with Dr. Lang" for a description of our revenue share arrangements.

85


Table of Contents

Revenue share agreements

        We are party to revenue share agreements with certain past and present members of our scientific advisory board under which these advisors agreed to participate on our scientific advisory board and to assist with the development of our customized implant products and related intellectual property. These agreements provide that we will pay the advisor a specified percentage of our net revenue, ranging from 0.2% to 1.33%, with respect to our products on which the advisor made a technical contribution or, in some cases, which we covered by a claim of one of our patents on which the advisor is a named inventor. The specific percentage is determined by reference to product classifications set forth in the agreement and is tiered based on the level of net revenues collected by us on such product sales. Our payment obligations under these agreements typically expire a fixed number of years after expiration or termination of the agreement, but in some cases expire on a product-by-product basis or expiration of the last to expire of our patents or patents for which the advisor is a named inventor that claims the applicable product.

        Philipp Lang, M.D., our Chief Executive Officer, joined our scientific advisory board in 2004 prior to becoming our employee. We first entered into a revenue share agreement with Dr. Lang in 2008 when he became our Chief Executive Officer. In 2011, we entered into an amended and restated revenue share agreement with Dr. Lang. Under this agreement, the specified percentage of our net revenues payable to Dr. Lang ranges from 0.875% to 1.33% and applies to all of our current and planned products, including our iUni, iDuo, iTotal Cr, iTotal PS and iTotal Hip products, as well as certain other knee, hip and shoulder replacement products and related instrumentation we may develop in the future. Our payment obligations under this agreement expire on a product-by-product basis on the last to expire of our patents on which Dr. Lang is named as an inventor that claim the applicable product. These payment obligations survive termination of Dr. Lang's employment with us.

        The aggregate revenue share percentage of net revenue from our currently marketed knee replacement products, including percentages under all of our scientific advisory board and Chief Executive Officer revenue share agreements, ranges, depending on the particular product, from 3.4% to 5.8%. We incurred aggregate revenue share expense, including all amounts payable under our scientific advisory board and Chief Executive Officer revenue share agreements, of $1.4 million during the year ended December 31, 2013, representing 4.0% of revenue, $2.3 million during the year ended December 31, 2014, representing 4.8% of revenue, $0.6 million during the three months ended March 31, 2014, and $0.8 million during the three months ended March 31, 2015. See "Certain Relationships and Related-Persons Transactions—Revenue share agreement with Dr. Lang" for further information regarding our arrangement with our Chief Executive Officer.

Off-balance sheet arrangements

        Through March 31, 2015, we did not have any relationships with unconsolidated organizations or financial partnerships, such as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.

Critical accounting policies and significant judgments and use of estimates

        The discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements, which had been prepared in conformity with accounting principles generally accepted in the United States that require us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements, and the reported amounts of revenue and expenses during the reporting periods. The accounting estimates that require our

86


Table of Contents

most significant estimates include revenue recognition, accounts receivable valuation, inventory valuations, intangible valuation, equity instruments, impairment assessments, income tax reserves and related allowances, and the lives of property and equipment. We evaluate our estimates and judgments on an ongoing basis. Actual results may differ from these estimates under different assumptions or conditions.

Revenue

        We generate revenue from the sale of customized implants and instruments to medical facilities through the use of a combination of direct sales personnel, independent sales representatives and distributors.

        We recognize revenue when all of the following criteria are met:

        For a majority of sales to medical facilities, we recognize revenue upon completion of the procedure, which represents satisfaction of the required revenue recognition criteria. For the remaining sales, which are made directly through distributors and generally represent less than 1% of revenue, we recognize revenue at the time of shipment of the product, which represents the point in time when the customer has taken ownership and assumed the risk of loss and the required revenue recognition criteria are satisfied. Such customers are obligated to pay within specified time periods regardless of when or if they ever sell or use the products. Once the revenue recognition criteria have been satisfied we do not offer rights of return or price protection and we have no post-delivery obligations.

Accounts receivable and allowance for doubtful accounts

        The majority of our accounts receivable balances consist of amounts due from medical facilities. In estimating whether accounts receivable can be collected, we perform evaluations of customers and continuously monitor collections and payments and estimate an allowance for doubtful accounts based on the aging of the underlying invoices, experience to date and any specific collection issues that have been identified. The allowance for doubtful accounts is recorded in the period in which revenue is recorded or at the time potential collection risk is identified.

Inventories

        Inventories consist of raw materials, work-in-process components and finished goods. Inventories are stated at the lower of cost, determined using the first-in first-out method, or market value. We also review our inventory value to determine if it reflects lower of cost or market, with market determined based on net realizable value. Appropriate consideration is given to inventory items sold at negative gross margins, purchase commitments and other factors in evaluating net realizable value.

Intangibles and other long-lived assets

        Intangible assets consist of developed technology and other intellectual property rights in-licensed from ImaTx as part of the spin-out transaction in 2004. Intangible assets are carried at cost less accumulated amortization. We test impairment of long-lived assets when events or changes in circumstances indicate that the assets might be impaired. For assets with determinable

87


Table of Contents

useful lives, amortization is computed using the straight-line method over the estimated economic lives of the respective intangible assets.

        Furthermore, periodically we assess whether long-lived assets, including intangible assets, should be tested for recoverability whenever events or circumstances indicate that their carrying value may not be recoverable. The amount of impairment, if any, is measured based on fair value, which is determined using estimated undiscounted cash flows to be generated from such assets or group of assets. If the cash flow estimates or the significant operating assumptions upon which they are based change in the future, we may be required to record impairment charges. During 2013 and 2014 and for the three months ended March 31, 2015, no such impairment charges were recognized.

Medical device excise tax

        We are subject to the Health Care and Education Reconciliation Act of 2010, which imposes a tax equal to 2.3% on the sales price of any taxable medical device by a medical device manufacturer, producer or importer of such device. We incurred medical device excise tax expense of $0.4 million for the year ended December 31, 2013, $0.7 million for the year ended December 31, 2014, $0.1 million for the three months ended March 31, 2014 and $0.2 million for the three months ended March 31, 2015, which amounts are included in general and administrative expense.

Share-based compensation and common stock valuation

Stock-based compensation

        We measure the cost of awards of equity instruments based on the grant date fair value of the awards. We use the Black-Scholes option pricing model to determine the weighted-average fair value of options granted and recognize the compensation expense of stock-based awards on a straight-line basis over the vesting period of the award.

        The fair value of stock-based payment awards using the Black-Scholes option pricing model is affected by the stock price, exercise price, and a number of assumptions, including expected volatility of the stock, expected life of the option, risk-free interest rate and expected dividends on the stock. Our estimates of these important assumptions are primarily based on third-party valuations, historical data, peer company data and our judgment regarding future trends and other factors.

        The fair value of options at date of grant was estimated using the Black-Scholes option pricing model. The following assumptions were used for the options that were granted in the respective periods, if any:

 
  Years Ended December 31,   Three Months Ended March 31,
 
  2013   2014   2014   2015
 
   
   
  (unaudited)

Risk-free interest rate

  0.78% - 1.61%   1.66% - 2.29%     1.37% - 1.67%

Expected term (in years)

  5.00 - 6.25   5.00 - 7.25     5.47 - 6.45

Dividend yield

  0.00%   0.00%     0.00%

Expected volatility

  55.00%   50.00%     50.00%

        We recognized employee stock-based compensation expense of $2.3 million for the year ended December 31, 2013, $2.6 million for the year ended December 31, 2014, $0.5 million for the three months ended March 31, 2014 and $1.1 million for the three months ended March 31, 2015, which amounts were calculated based on awards ultimately expected to vest based on historical

88


Table of Contents

forfeiture rates to date, the amount of stock-based compensation capitalized as part of inventory was not material.

        The following is a summary of stock-based compensation expense (in thousands):

 
  Years Ended
December 31,
  Three Months Ended
March 31,
 
 
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Cost of revenues

  $ 179   $ 162   $ 41   $ 110  

Sales and marketing

    439     597     113     210  

Research and development

    879     628     98     254  

General and administrative

    840     1,163     213     514  

  $ 2,337   $ 2,550   $ 465   $ 1,088  

        At March 31, 2015, we had $5.8 million of total unrecognized compensation expense that will be recognized over a weighted-average period of 2.56 years.

Common stock valuations

        The fair value of the shares of our common stock underlying our stock options has historically been determined by our board of directors. Because there has been no public market for our common stock and in the absence of recent arm's-length cash sales transactions of our common stock with independent third parties, our board of directors has determined the fair value of our common stock by considering at the time of grant a number of objective and subjective factors. Our board of directors intends all options granted to be exercisable at a price per share not less than the per share fair value of our common stock underlying those options on the date of grant. The estimated fair value of our common stock was determined at each valuation date in accordance with the guidelines outlined in the American Institute of Certified Public Accountants, or AICPA, Audit and Accounting Practice Aid, "Valuation of Privately Held Company Equity Securities Issued as Compensation". Our board of directors, with the assistance of management, developed these valuations using significant judgment and taking into account numerous factors, including the following:

89


Table of Contents

        We considered the following approaches in the preparation of our valuations:

        In addition, we also considered an enterprise value allocation method:

        For the valuations performed as of September 30, 2013 and January 31, 2014, we estimated the per share common stock value by allocating the enterprise value of the company using a hybrid allocation method that utilized a combination of the OPM method and a scenario analysis that may be considered to be part of a PWERM. We determined the common stock value was $7.32 as of September 30, 2013 and $8.12 as of January 31, 2014. For the valuations performed as of May 31, 2014, November 30, 2014 and March 31, 2015, we estimated the per share common stock value by allocating our enterprise value using the PWERM method. We determined the common stock value was $8.96 as of May 31, 2014, $10.18 as of November 30, 2014 and $15.26 as of March 31, 2015.

        In determining the estimated fair value of our common stock, our board of directors also considered the fact that our stockholders could not freely trade our common stock in the public markets. Accordingly, we applied discounts to reflect the lack of marketability of our common stock based on the expected time to liquidity. The estimated fair value of our common stock at each

90


Table of Contents

grant date reflected a non-marketability discount partially based on the anticipated likelihood and timing of a future liquidity event.

        The key subjective factors and assumptions used in our valuations primarily consisted of:

        The following table sets forth information about our stock option grants since January 1, 2013 on each date on which we granted stock options:

Grant Date
  Number of
Options
Granted
  Exercise
Price $
  Estimated fair value of
common stock per
share used to
determine stock-based
compensation
expense $
 

4/2/2013

    483,155     5.5     3.54  

6/11/2013

    386,385     5.5     3.54  

8/4/2014

    616,050     8.96     8.96  

8/4/2014

    413,050     10.96     8.96  

9/17/2014

    7,500     10.96     8.96  

1/13/2015

    334,336     10.96     10.18  

2/5/2015

    12,500     10.96     10.18  

4/28/2015

    20,000     15.26     15.26  

    2,273,923              

        At each grant date the board of directors reviewed any recent events and their potential impact on the estimated fair value per share of the common stock. For grants of stock awards made on dates for which there was no valuation performed by an independent third party, our board of directors considered the most recent independent third-party valuation and other pertinent information available to it at the time of grant. As provided for in Code Section 409A, we generally rely on independent third-party valuations for up to 12 months unless we experienced a material event that would have affected the estimated fair value per common share.

        Following the closing of this offering, the fair value of our common stock will be determined based on the closing price of our common stock on the grant date.

Quantitative and qualitative disclosures about market risk

        We are exposed to various market risks, which may result in potential losses arising from adverse changes in market rates, such as interest rates and foreign exchange rates. We do not enter into derivatives or other financial instruments for trading or speculative purposes and do not believe we are exposed to material market risk with respect to our cash and cash equivalents.

91


Table of Contents

Interest rate risk

        We are exposed to interest rate risk in connection with borrowings made under the Revolving Line provided under the SVB/Oxford Agreement, which bears interest at a floating rate based on the prime rate. For variable rate debt, interest rate changes generally do not affect the fair value of the debt instrument, but do impact future earnings and cash flows, assuming other factors are held constant. A hypothetical 100 basis point change in interest rates during any of the periods presented would not have had a material impact on our consolidated financial statements.

Foreign currency exchange risk

        Fluctuations in the rate of exchange between the U.S. dollar and foreign currencies could adversely affect our financial results. Approximately 29% of our revenue from product sales for the years ended December 31, 2013 and 2014, 30% for the three months ended March 31, 2015 and 36% for the three months ended March 31, 2014 were denominated in foreign currencies, and we expect that foreign currencies will continue to represent a similarly significant percentage of our net sales in the future. Costs of revenue related to these sales are primarily denominated in U.S. dollars; however, operating costs, including sales and marketing and general and administrative expense, related to these sales are largely denominated in the same currencies as the sales, thereby partially limiting our transaction risk exposure. Additionally, fluctuations in foreign currency exchange rates may cause us to recognize transaction gains and losses in our statement of operations. To date, foreign currency transaction realized gains and losses have not been material to our consolidated financial statements, and we have not engaged in any foreign currency hedging transactions. As our international operations grow, we will continue to reassess our approach to managing the risks relating to fluctuations in currency rates. A 10% increase or decrease in foreign currency exchange rates would have resulted in additional income or expense of $0.3 million for the year ended December 31, 2013 and $0.5 million for the year ended December 31, 2014. A 10% increase or decrease in foreign currency exchange rates would not have had a material impact on our consolidated financial statements for the three months ended March 31, 2014 or for the three months ended March 31, 2015.

        We do not believe that inflation and change in prices had a significant impact on our results of operations for any periods presented in our consolidated financial statements.

Segment information

        We have one primary business activity and operate as one reportable segment.

JOBS Act accounting election

        The Jumpstart our Business Startups Act of 2012, or the JOBS Act, permits an "emerging growth company" such as us to take advantage of an extended transition period to comply with new or revised accounting standards applicable to public companies. We are choosing to "opt out" of this provision and, as a result, we will comply with new or revised accounting standards as required when they are adopted. This decision to opt out of the extended transition period under the JOBS Act is irrevocable.

Recent accounting pronouncements

        In August 2014, the Financial Accounting Standards Board, or FASB, issued Accounting Standards Update, or ASU, No. 2014-15, Presentation of Financial Statements-Going Concern (Subtopic 205-40)—Disclosure of Uncertainties about an Entity's Ability to Continue as a Going Concern (ASU 2014-15). This ASU provides guidance about management's responsibility to evaluate whether there is a substantial doubt about an entity's ability to continue as a going

92


Table of Contents

concern and to provide related footnote disclosures. Specifically, this ASU defines the term substantial doubt, requires an evaluation of every reporting period including interim periods, provides principles for considering the mitigating effect of management's plan, requires certain disclosures when substantial doubt is alleviated as a result of consideration of management's plans, requires an express statement and other disclosures when substantial doubt is not alleviated, and requires an assessment for a period of one year after the date that the financial statements are issued or available to be issued. ASU 2014-15 is effective for annual periods beginning after December 15, 2016 and interim periods within those reporting periods. Earlier adoption is permitted. We are currently evaluating the impact of this pronouncement on our consolidated financial statements.

        In April 2014, FASB issued ASU No. 2014-08, Reporting Discontinued Operations and Disclosures of Disposals of Components of an Entity. This ASU amendment changes the requirements for reporting discontinued operations in Subtopic 205-20. The amendment is effective on a prospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning on or after December 15, 2014. Early adoption is permitted for disposals that have not been reported in financial statements previously issued. We will apply the provisions of this ASU to any future transactions that qualify for reporting discontinued operations.

        In May 2014, FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606), which supersedes the revenue recognition requirements in ASC 605, Revenue Recognition. This ASU is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. The ASU also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract. This ASU's effective date will be the first quarter of fiscal year 2017 using one of two retrospective application methods. We have not determined the potential effects of this ASU on our consolidated financial statements.

93


Table of Contents


BUSINESS

Overview

        We are a medical technology company that uses our proprietary iFit Image-to-Implant technology platform to develop, manufacture and sell joint replacement implants that are individually sized and shaped, which we refer to as customized, to fit each patient's unique anatomy. The worldwide market for joint replacement products is approximately $15 billion annually and growing, and we believe our iFit technology platform is applicable to all major joints in this market. We believe we are the only company offering a broad line of customized knee implants designed to restore the natural shape of a patient's knee. We have sold a total of more than 30,000 knee implants in the United States and Europe. In recent clinical studies, iTotal CR, our cruciate-retaining total knee replacement implant and best-selling product, demonstrated superior clinical outcomes, including better function and greater patient satisfaction compared to off-the-shelf implants. We recently initiated the limited launch of iTotal PS, our posterior-stabilized total knee replacement implant which addresses the largest segment of the knee replacement market. We expect to submit an application for clearance of iTotal Hip, our first customized hip replacement implant, with the U.S. Food and Drug Administration, or FDA, in 2015.

        Our iFit technology platform comprises three key elements:

We believe our iFit technology platform enables a scalable business model that greatly lowers our inventory requirements, reduces the amount of working capital required to support our operations and allows us to launch new products and product improvements more rapidly, as compared to manufacturers of traditional implants.

        Manufacturers of traditional knee replacement implants offer products with a limited range of sizes and geometries, which we refer to as off-the-shelf implants. Off-the-shelf implants are not designed to restore a particular patient's unique anatomy. Our summary of one study indicates that approximately one in five patients who receives an off-the-shelf total knee replacement is not satisfied with the results. See "—Industry Background—Knee implants" for a description of our summary of this study.

        Based on clinical data developed independently by orthopedic surgeons comparing our iTotal CR to off-the-shelf total knee replacement implants, as well as our own research and the common approach we employ in the design and manufacture of our products, we believe that our customized knee replacement implants offer significant benefits to the patient, the surgeon and the hospital that are not afforded by off-the-shelf implants.

Better fit.  We design our customized knee implants to restore the patient's own native anatomy. As a result, we believe that our implants fit better.

94


Table of Contents

Faster recovery.  We believe an individual fit requires less bone and soft tissue removal by the surgeon, thereby shortening recovery times.

Better function.  We design our customized knee implants to follow the particular shape and contour of the patient's knee. As a result, we believe our implants offer an increased potential for a knee that moves more naturally and is more stable.

Greater patient satisfaction.  We believe our implants offer patients greater overall satisfaction with the results of their knee replacement.

For the surgeon.  We believe that the combination of the use of our iJigs with our customized knee replacement implants enables a more accurate, reproducible and simplified surgical procedure by reducing the number of required steps and increasing the precision of the placement of the implant. Our summary of a retrospective study of 200 knee replacement surgeries published in 2014 in the peer-reviewed Journal of Arthroplasty, or the 2014 JOA Study indicates that our iTotal CR implant was 1.8 times more likely to be in the desired alignment range after surgery than an off-the-shelf implant. One of the authors of this study is a paid consultant to us.

For the hospital.  We believe that our customized knee replacement implants and iFit technology platform provide a better economic outcome for hospitals by:

improving patient recovery times, reducing blood loss and reducing adverse event rates at discharge;

reducing the costs associated with managing and sterilizing large numbers of reusable instruments; and

improving turnaround times with the potential for more procedures to be completed within the same amount of time and for the hospital to generate additional revenue.

        We own or exclusively in-license a total of approximately 470 issued patents and pending patent applications that cover customized implants and patient-specific instrumentation, or PSI, for all major joints and other elements of our iFit technology platform. Our intellectual property portfolio includes 112 issued United States patents, 51 patents issued in countries outside the United States, and 309 patent applications worldwide. We believe that our patent portfolio provides a significant barrier to entry.

        All of our knee replacement products have been cleared by the FDA under the premarket notification process of Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the FDCA, and have received certification to CE Mark. We market our products to orthopedic surgeons, hospitals, hospital networks, ambulatory surgery centers and other medical facilities, and patients. We have 87 employees engaged in the sales and marketing of our products in the United States, Germany and the United Kingdom. We use independent sales representatives and distributors to complement our own sales and marketing efforts in these and other markets.

        We introduced our iUni and iDuo partial knee replacement products in 2007 and our iTotal CR in 2011. For the year ended December 31, 2014, we generated revenue of $48.2 million from product sales, representing a 39% increase over the prior year. For the three months ended March 31, 2015, we generated revenue of $14.7 million from product sales, representing a 36% increase over the three months ended March 31, 2014.

95


Table of Contents

Industry background

Market opportunity

Joint replacement for treatment of osteoarthritis

        Osteoarthritis is the principal condition that leads to joint replacement surgery. Osteoarthritis is a degenerative joint disease characterized by the breakdown of the cartilage that protects and cushions key joints in the body, including the knees, hips and shoulders. This causes the bones in the affected joint to rub against each other, which can result in significant and chronic joint pain, stiffness, swelling, numbness, loss of flexibility and loss of motor function. The pain of osteoarthritis, even during the early stages of the disease, can be overwhelming for patients and can have significant physical, psychological, quality of life and financial implications.

        An estimated 27 million people in the United States and 630 million people worldwide suffer from osteoarthritis. Compelling demographic trends, such as the growing population of aging yet active individuals and rising rates of obesity, are expected to be key drivers in the continued growth of osteoarthritis occurrence. The National Institutes of Health, or NIH, projects that by 2030, approximately 70 million people in the United States will be 65 years or older and will be at high risk of developing osteoarthritis. Osteoarthritis is more common in adults over the age of 50, but the condition and precursors of the condition can be observed much earlier.

        For moderate to advanced cases of osteoarthritis, a surgical procedure may be required to replace the damaged joint. During this joint replacement, or arthroplasty, procedure, a surgeon removes the damaged bone in the affected joint and inserts an implant as a replacement. The joint implant may replace all of the principal components of the joint, in which case the procedure is referred to as a total joint replacement, or may replace only a portion of the joint, in which case the procedure is referred to as a partial joint replacement. According to data from the American Academy of Orthopaedic Surgeons, or AAOS, most patients who undergo primary total knee arthroplasty, or TKA, and primary total hip arthroplasty, or THA, are aged 50 to 80 years old. However, our summary of presentations made at the 2014 annual meeting of the AAOS indicates that increased use of these procedures in patients between 45 and 64 years old has fueled recent growth in the TKA and THA markets. Based on these trends, we expect patient demand for total joint replacements will continue to increase.

Joint replacement market

        According to the Orthopaedic Industry Annual Report published in March 2015 by Orthoworld Inc., or the 2014 Orthoworld Report, worldwide sales of joint replacement products, including replacements for knees, hips, shoulders, elbows, wrists, ankles and digits outside of trauma, exceeded $15.4 billion in 2014 and are expected to grow to approximately $18 billion by the end of 2020. The 2014 Orthoworld Report estimated that worldwide sales of knee replacement products totaled approximately $7.5 billion in 2014. According to the Orthopaedic Industry Annual Report published in May 2014 by Orthoworld Inc., or the 2013 Orthoworld Report, 2013 estimated sales of knee replacement products in the United States represented approximately 56% of total estimated worldwide sales of such products.

        According to the industry report U.S. Market for Large Bone and Joint Orthopedic Devices published in February 2014 by iData Research, or the iData Report, primary total knee replacement implants and partial knee replacement implants accounted for approximately 83% of the 2013 knee replacement market by revenue in the United States. The remaining 17% of the knee replacement market is for follow up procedures known as revision surgeries and patient-specific instruments. According to the iData Report, in 2013, of the primary total knee replacement market in the United States, posterior-stabilized procedures represented approximately 72% by revenue and cruciate-

96


Table of Contents

retaining procedures represented approximately 28% by revenue. The decision to perform a posterior-stabilized or cruciate-retaining total knee replacement is usually a matter of a surgeon's preferred surgical technique.

        In 2014, according to the 2014 Orthoworld Report, worldwide sales of hip replacement products totaled approximately $6.3 billion. According to the 2013 Orthoworld Report, 2013 estimated sales of hip replacement products in the United States represented approximately 54% of total estimated worldwide sales of such products. According to the iData Report, primary total hip replacement implants accounted for approximately 69% by revenue of the 2013 hip replacement market in the United States.

        The market for joint replacements extends beyond knee and hip replacements. For example, the treatment of osteoarthritis in the extremities, including the shoulder, elbow, wrist and digit, may involve the replacement of the affected joint. According to the 2014 Orthoworld Report, the worldwide extremities joint replacement market was estimated at $1.6 billion in 2014.

Knee implants

        Knee replacement implants typically have four principal components:

        The tibial and femoral components are attached to the patient's bone using acrylic cement. The surfaces where the metal components meet are referred to as articular surfaces.

Clinical shortcomings of off-the-shelf knee implants

        Knees vary in size and shape; no two knees are the same. In a traditional knee replacement procedure, the surgeon must choose an off-the-shelf implant with a size and shape that the surgeon thinks will work best for the patient. However, off-the-shelf implants are not customized to fit an individual patient's knee, and during a knee replacement procedure, the surgeon has to fit the patient's soft tissue, bones and cartilage to the fixed dimensions of the implant through an iterative process of sizing and positioning. This typically entails removing bone and shaping the residual bone to the implant. Surgeons often have to make compromises on implant fit, rotation and alignment because the surgeons are limited by the size and shape of the implant. These compromises can cause residual pain and functional limitations after surgery, which we believe contribute to patient dissatisfaction. We reviewed a study of 1,703 patients published in 2009 in the peer-reviewed journal Clinical Orthopaedics and Related Research where patient satisfaction was determined by combining patients who answered very dissatisfied, dissatisfied or neutral into one group and patients who answered satisfied or very satisfied into a second group. Our summary of the study indicates that approximately one in five patients who receive an off-the-shelf implant is not satisfied with his or her total knee replacement.

97


Table of Contents

        We believe that the typical compromises surgeons must make with off-the-shelf implants can affect patient outcomes in the following important ways:

        The graphic below depicts femoral overhang, femoral undersizing, tibial overhang and tibial undersizing with an off-the-shelf knee implant:

GRAPHIC

98


Table of Contents

        In order to achieve proper tibial rotation, there are often tradeoffs among proper sizing, coverage and placement with off-the-shelf implants. The graphic below depicts proper rotation and malrotation of the tibial component:

GRAPHIC

99


Table of Contents

        The graphic below depicts abnormal femoral lift-off, one of the potential unnatural movements, in a knee replacement with an off-the-shelf implant.

GRAPHIC

100


Table of Contents

Other challenges associated with off-the-shelf implants

        In addition to the residual pain and functional limitations suffered by patients, we believe procedures using off-the-shelf knee implants present several intra-operative and economic challenges for surgeons and hospitals, including:

Recent efforts to improve traditional knee replacement surgery

        In an effort to overcome some of the shortcomings associated with off-the-shelf implants, manufacturers have focused on improving traditional knee replacement procedures. We believe, however, that these efforts do not fully address the needs of patients, surgeons and hospitals:

101


Table of Contents

The ConforMIS Solution: One Patient, One Implant

        No two joints are the same; accordingly, we believe no two implants should be the same. We believe our customized joint replacement products and proprietary technology create an opportunity to disrupt the large, existing market for off-the-shelf orthopedic implants. Our summary of a survey of 356 orthopedic surgeons conducted by iData Research during the 2014 annual meeting of the American Academy of Orthopaedic Surgeons indicates that approximately 47% of respondents claimed to see a benefit to using custom implants.

        We use our proprietary iFit Image-to-Implant technology platform to design and manufacture customized knee implants that are precisely sized and shaped to fit the unique three-dimensional curvatures of each patient's knee, as well as associated customized, single-use patient-specific instrumentation, which we refer to as iJigs. We believe our proprietary iFit technology platform is applicable to all major joints.

iFit Image-to-Implant technology platform

        Our iFit technology platform comprises three key elements:

        We believe our iFit technology platform enables a scalable business model that greatly lowers our inventory requirements, reduces the amount of working capital required to support our operations and allows us to launch new products and product improvements more rapidly, as compared to manufacturers of off-the-shelf implants.

102


Table of Contents

Our customized implant procedure

        The principal steps involved in the application of our iFit technology platform to the delivery of a customized knee implant to the hospital and surgical plan to the surgeon include:




LOGO

 

CT scan
The surgeon orders a standard diagnostic CT scan of the patient's knee, along with a few CT images of the hip and ankle. The CT scan is then sent to ConforMIS.



LOGO

 

Recreating the knee using three-dimensional modeling
We use our proprietary algorithms and computer software to map the articular surfaces of the knee joint, define the areas of disease and convert the imaging data into a three-dimensional model of the knee. Our software is designed to correct for deformities caused by osteoarthritis and to digitally recreate the biomechanical axes of the patient's knee, which is important in determining proper rotation and alignment of the implant.



LOGO

 

Personalizing the implant
Our engineers use computer-aided design, or CAD, software to design the customized implant and iJigs that will precisely match the three-dimensional model of the patient's knee. We are able to model the implant contact surfaces and maximize contact area for each patient with the goal of reducing polyethylene wear, a common reason for implant failure.



LOGO

 

Development of patient-specific surgical plan
For each patient, we generate and provide the surgeon with iView, which allows the surgeon to visualize all preoperative planning information, including surgical steps, measurements and orientations. We make iView available to the surgeon electronically in advance of the procedure and include iView in a single package with our customized implant and iJigs.



LOGO

 

Just-in-time delivery to hospital
We deliver the patient's customized knee implant and iJigs to the hospital in advance of the surgery. We are able to deliver our iUni, iDuo and iTotal CR products within six to seven weeks of the date of our receipt of an order and the CT scan, and we expect a similar delivery time for our iTotal PS.

Key benefits of our customized products

        We use our iFit technology platform to develop customized joint replacement systems and single-use surgical instruments. Based on clinical data developed independently by orthopedic surgeons comparing our iTotal CR to off-the-shelf total knee replacement implants, as well as our own research and the common approach we employ in the design and manufacture of all of our products, we believe that our customized knee replacement implants offer significant benefits to the patient, the surgeon and the hospital that are not afforded by off-the-shelf implants.

103


Table of Contents

104


Table of Contents

105


Table of Contents

106


Table of Contents

Our strategy

        Our objective is for our customized implants to become the standard of care for orthopedic joint replacement surgery. We believe that our iFit Image-to-Implant technology platform will enable us to offer a wide variety of customized joint replacement implants with superior performance that offer key clinical and economic benefits over off-the-shelf implants. Key elements of our strategy to achieve our objective are to:

107


Table of Contents

Our products

Knee replacement products

        We offer a broad line of primary knee replacement implants, both partial and total, that we customize to fit each particular patient. Surgeons use our family of customized knee implants to treat mild to severe osteoarthritis of the knee. All of our knee replacement products have been cleared by the FDA under the premarket notification process of Section 510(k) of the FDCA and have received certification to CE Mark. We deliver our customized knee replacement implants and iJigs, together with iView, to the hospital in a single pre-sterilized package in advance of the scheduled arthroplasty procedure.

        The following is an overview of each of our knee replacement implant products:


GRAPHIC
   
iTotal CR is the only cruciate-retaining, customized total knee replacement system on the market designed to restore the natural shape of a patient's knee. We introduced the iTotal CR in May 2011 and launched new generations in each of 2012, 2013 and 2015. The iTotal CR includes a femoral implant, a tibial tray, and dual medial and lateral polyethylene inserts, which serve as a cushion between the femoral and tibial components, all of which are individually made for the particular patient, together with a polyethylene patella designed to work with our customized components.  
GRAPHIC


 


GRAPHIC

 

 
The iTotal PS is the only posterior cruciate ligament substituting, or posterior-stabilized, customized total knee replacement product on the market designed to restore the natural shape of a patient's knee. We initiated a limited launch of the iTotal PS in the United States in February 2015, which we expect will continue into 2016. The iTotal PS includes a femoral implant with a metal cam, a tibial tray, and a single polyethylene insert, which includes a plastic spine, all of which are individually made for the particular patient, together with a polyethylene patella designed to work with our customized components.  
GRAPHIC

108


Table of Contents


 


GRAPHIC

 

 
The iDuo is the only customized bicompartmental knee replacement system on the market. The iDuo is considered a bicruciate-retaining knee replacement because the surgeon may retain both the anterior cruciate ligaments, or ACL, and posterior cruciate ligaments, or PCL. We first launched the iDuo in December 2007 and have launched new generations of the product in each of 2010 and 2012. The iDuo includes a femoral implant, a tibial tray and a single polyethylene insert, all of which are individually made for the particular patient, together with a polyethylene patella designed to work with our customized components.  
GRAPHIC


 


GRAPHIC

 

 
The iUni is the only customized unicompartmental knee replacement product on the market for treatment of the medial or lateral compartment of the knee. The iUni is considered a bicruciate-retaining knee replacement because the surgeon retains both the ACL and PCL. We first launched the iUni in June 2007 and launched new generations of the product in each of 2009 and 2012. The iUni includes a femoral implant, a tibial tray and a single polyethylene insert, all of which are individually made for the particular patient.  
GRAPHIC


 

Hip replacement product candidate

iTotal Hip

        We are currently developing our iTotal Hip to provide a customized total hip replacement implant. We expect to submit to the FDA an application for 510(k) clearance of our iTotal Hip in 2015. We expect that iTotal Hip will be our next product introduction after iTotal PS. We believe the introduction of iTotal Hip will provide synergies with our existing line of customized knee implants because most surgeons who perform knee replacements also perform hip replacements. Thus, we expect that iTotal Hip will complement our existing product line, customer base, sales force and distribution channels.

        Problems with off-the-shelf hip implants.    As with the knee, no two hips are the same. They vary in size and shape. As is the case for knee replacements, off-the shelf hip replacement implants are offered in a limited number of standard shapes and sizes. The key clinical challenges and complications with off-the-shelf total hip replacements are:

109


Table of Contents

        Manufacturers of off-the-shelf hip implants attempted to address these shortcomings by developing modular hip systems consisting of a large number of neck components with different neck angles, lengths and anteversion paired with off-the-shelf stems and femoral head components. The surgeon would select a modular neck during surgery that best fit the patient's anatomy. Following their introduction, these modular hips initially were widely used. However, there was a high failure rate because the implants had a tendency to break at the modular connection between the stem and the neck and corrode because of the additional metal-to-metal connection between the neck and the stem. As a result, usage of modular hips has declined dramatically.

        Off-the-shelf hip implants require a large number of trays of reusable instruments with the same instrument management challenges and costs of cleaning and sterilization associated with off-the-shelf knee implants. In addition, orthopedic surgery using off-the-shelf hip implants is characterized by a difficult surgical technique and can suffer from a lack of reproducibility in component placement.

        The ConforMIS hip replacement solution.    We are developing our iTotal Hip using our iFit technology platform. Our iTotal Hip will be customized to the individual patient and designed to address the limitations of off-the-shelf hip implants. We are designing our iTotal Hip to consist of the following components:

        We believe that our customized iTotal Hip monoblock femoral component has the same strength as the femoral component of a standard monoblock, or non-modular, off-the-shelf hip implant while at the same time addressing the variability of patients' femoral neck shapes. We believe that the customized nature of our implant will appeal to many surgeons who used modular hips in the past. In addition, we believe the combination of our customized implant paired with patient-specific iJigs and patient-specific placement of the acetabular cup and the femoral component will help address the problems of hip dislocation and leg length discrepancy associated with off-the-shelf implants.

110


Table of Contents

        Because our iTotal Hip is based on our iFit technology platform, we are designing it to take advantage of our proprietary design software, 3D printing technology and a just-in-time single package delivery system, just as we do with our customized knee implants.

Our proprietary iJigs

        Our iJigs are customized, single-use, patient-specific instrumentation. The iJigs we deliver with our joint replacement products include the guides and instruments the surgeon requires to remove the bone and soft tissue necessary to fit our customized implant to the patient. We believe that providing our iJigs with our customized knee implants enable a more accurate, reproducible and simplified surgical procedure by reducing the number of steps and increasing the precision of the alignment.

        In an off-the-shelf procedure, the surgeon must have large numbers of reusable instruments available because the surgeon does not know in advance which bone cuts and other tissue removal will be necessary to prepare the patient to receive the off-the-shelf implant. As a result, a knee replacement procedure performed using our customized implants and iJigs requires only one tray of reusable instruments, which we provide to the hospital, as compared to a knee replacement procedure using an off-the-shelf implant, which requires approximately five to 10 double-tiered, reusable instrument trays, which the off-the-shelf manufacturer provides to the hospital. We provide our implants with a full set of iJigs in a single package. Our iJigs arrive sterile and are discarded after use.

        The graphic below depicts our single package delivery systems for our iJigs and knee replacement products:

GRAPHIC

111


Table of Contents

Clinical studies

        In evaluating the clinical and economic benefits of our customized knee implants, we consider results obtained from studies sponsored by us, conducted by orthopedic surgeons who are paid consultants to us and conducted independently by orthopedic surgeons, including studies that compare our customized knee implants with off-the-shelf knee implants. As of May 31, 2015, there were 5 peer-reviewed journal articles and 24 abstracts either presented or accepted for presentation at conferences reporting on the results of clinical studies of our customized knee implants. Of the published or presented studies known to us that compared our knee replacement product to an off-the-shelf product, all but one reported either that the performance of our knee replacement product was superior to an off-the-shelf product on the reported measures or that there were no statistically significant differences detected between the performance of our knee replacement product and an off-the-shelf knee replacement product on those measures. The following provides our summary of the findings of several of these studies that relate to our iTotal CR product and that we considered in forming our views as to the clinical and economic benefits of our customized knee implants:

        Lower adverse event rates and faster hospital discharge.    We reviewed an abstract presented at the 2015 ICJR Arthroplasty Conference that described a retrospective study of 248 patients who had undergone a total knee replacement, 126 of whom received an iTotal CR and 122 of whom received a posterior cruciate-retaining off-the-shelf knee replacement. Our summary of the principal findings of the study is as follows:

        We provided financial support for this study.

        Improved clinical outcomes and greater patient satisfaction.    We reviewed an abstract presented at the 2015 ICJR Arthroplasty Conference that described an investigator-initiated, matched-pair, retrospective study of 35 patients who had undergone total knee replacement with an iTotal CR and 35 patients who had undergone total knee replacement with an off-the-shelf knee implant. Two surgeons performed these TKAs. For each matched pair, the same surgeon performed

112


Table of Contents

the iTotal CR and off-the-shelf procedure. Our summary of the principal findings of the study is as follows:

        This study was conducted by independent orthopedic surgeons.

        Favorable adverse event rate and outcomes.    We reviewed an abstract that has been accepted for presentation at the upcoming 2015 International Congress for Joint Reconstruction Pan-Pacific Congress that described a multi-center, prospective study of adverse event rates and outcome scores of 197 patients who had undergone total knee replacement with an iTotal CR. Our summary of the principal findings of the study is as follows:

        We provided financial support for this study. All of the authors of this study are paid consultants to us or have been paid by us for specified services.

        More accurate alignment.    We reviewed a paper published in 2014 in the Journal of Arthroplasty that described an investigator-initiated, retrospective study of 200 patients who had undergone total knee replacements, 100 of whom received an iTotal CR implant and 100 of whom received an off-the-shelf implant. The same surgeon performed all 200 implant procedures, and all

113


Table of Contents

of the iTotal CR and off-the-shelf implants had been performed consecutively. Our summary of the principal findings of the study is as follows:

        This study was conducted by five independent orthopedic surgeons and one surgeon who is a paid consultant to us.

        A more stable knee implant without abnormal lift off.    We reviewed an abstract presented at the 2014 ICJR Pan-Pacific Congress that described a study of 20 patients who had undergone total knee replacement, 11 of whom received an iTotal CR implant and nine of whom received an off-the-shelf knee implant. The same surgeon performed all 20 implant procedures. All patients had been assessed following the procedure on the Knee Society Knee Score, a commonly used surgeon-assessed weighted score of pain, stability, range of motion and function. Our summary of the principal findings of the study follows. All of the patients had Knee Society Knee Scores greater than 90 out of a maximum score of 100, which is an indication of a clinically successful knee replacement. Patients who had received an iTotal CR showed a post-operative kinematic pattern similar to a normal knee when asked to perform a deep knee bend and chair-rise. Patients with off-the-shelf implants experienced greater variability in their kinematic patterns, differing from the typical kinematic patterns of the normal knee. More than half of the patients with an off-the-shelf implant experienced abnormal lift off, while patients with an iTotal CR showed no lift off. Due to the small sample size, the results from this study were not statistically significant. We provided financial support for this study. Two of the surgeons who conducted this study are paid consultants to us.

        Improved function with a more normal kinematic pattern.    We reviewed an abstract presented at the 2014 ICJR Pan-Pacific Congress that described a study of 20 patients who had undergone a total knee replacement, 10 of whom received an iTotal CR implant and 10 of whom received an off-the-shelf knee implant. The same surgeon performed all 20 implant procedures. Our summary of the principal findings of the study follows. Patients who received an iTotal CR achieved more normal-like kinematic patterns. During both a deep knee bend and a chair-rise, patients with an iTotal CR achieved more normal motion of their lateral condyle and greater magnitude of axial rotation. One-half of the patients with off-the-shelf implants experienced an anterior slide of their lateral condyle, which is the opposite of normal knee kinematics. Due to the small sample size, the results from this study were not statistically significant. We provided financial support for this study. One of the authors of this study also is a paid consultant to us.

Sales and marketing

        We market and sell our products in the United States, Austria, Germany, Ireland, the United Kingdom, Switzerland, Hong Kong and Singapore. See our "Management's Discussion and Analysis of Financial Condition and Results of Operations—Consolidated results of operations—Revenue" section of this prospectus for a summary of product revenue by geography. We market our products to orthopedic surgeons, hospitals and other medical facilities, including ambulatory surgery centers, and patients. We have 87 employees in the United States and other countries engaged in the sales and marketing of our products, of which 70 are direct sales representatives. We use independent sales representatives and a limited number of distributors to complement our own sales and marketing efforts in these and other markets. We expect to expand

114


Table of Contents

the size of our sales and marketing capabilities through additional hires and by entering into additional distribution arrangements in key territories.

        We offer technical and product focused training programs for our direct sales, independent sales and distributor representatives. We have designed these programs to provide the entire sales force with technical expertise and product knowledge so they may more effectively represent and market our products to surgeons, hospitals and other medical facilities. We believe we offer a simplified surgical technique with the use of our products that may reduce the need for our representatives to spend time in the operating room during a procedure when compared to the representatives of off-the-shelf implant manufacturers. This potentially will allow our sales representatives to spend more time on new customer growth opportunities.

        We believe surgeons appreciate the clinical and economic benefits, including increased patient satisfaction, operating room efficiencies and lower adverse event rates, that we believe our products offer. We believe hospitals focus on the economic benefits that we believe are associated with our products, such as fewer instrument trays to manage, clean and sterilize, reduced operating room time, faster operating room set up and breakdown time and lower adverse event rates. We believe patients are interested in returning to daily activities quickly and are attracted to our customized approach. We employ direct-to-consumer marketing, primarily through patient testimonials, social media, search engine marketing, and print, online, radio and television news reports.

        In the United States, we use a database of surgeons, hospitals and procedure volumes to determine which geographical regions are most commercially attractive. Globally, we look for markets with a high volume of total knee replacements, favorable reimbursement characteristics and an historical openness to advanced technologies. We deploy sales representatives to focus on surgeons in these markets. In regions with a lower volume of total knee replacements, we generally contract with independent sales representatives and distributors to take advantage of their broad networks, surgeon relationships and ancillary, non-competitive, product lines such as sports medicine products.

        We work with orthopedic surgeons, including select key opinion leaders, affiliated with leading medical centers in the United States and Germany. We refer to the medical centers at which these surgeons practice as ConforMIS Centers of Excellence, or COE. We work with the COE surgeons on technical training and surgeon education. We plan to selectively add COEs on an ongoing basis.

        We identify local markets in the United States in which we believe we can become a top-three orthopedic implant supplier, as measured by procedures. We work to significantly increase our sales in these markets by focusing on high-volume, influential surgeons who use our products. We create a tailored direct marketing strategy to increase consumer awareness in these markets. We believe we have achieved a greater than 10% share by volume of procedures in a number of these markets.

Research and development

        Our internal research and development efforts are focused on continued innovation to develop customized implants for the knee and hip and to assess the application of our iFit technology platform to other major joints in the body. In our research and development activities, we actively work on:

115


Table of Contents

        Our team of 33 full-time research and development employees has extensive experience in biomechanical engineering, manufacturing engineering and software engineering and development. A significant portion of our research and development activities involves the development of proprietary algorithms and computer software that underpins our entire iFit technology platform.

        When we develop a new product or seek to improve our existing products, our team of biomechanical and software engineers typically collaborates closely with experienced orthopedic surgeons and other independent scientists. After we complete the development of a new product or an improvement to an existing product, we seek regulatory clearance before introducing the product into patients.

Manufacturing

        We conduct our manufacturing activities in state-of-the-art design and manufacturing facilities in Bedford, Burlington and Wilmington, Massachusetts. We are in the process of vacating our Burlington facility and transferring those operations to our Wilmington facility. We have 158 full-time employees on our manufacturing team.

        We produce all of our CAD designs in-house and use them to direct all of our product manufacturing efforts. We manufacture all of our patient-specific instruments, or iJigs, in our facilities. We also make the majority of the tibial components used in our implants at our facilities. We outsource the production of the remainder of the tibial components and the manufacture of femoral and other implant components to third-party suppliers. The femoral components of our implants are cast in metal and finished. Our suppliers make our customized implant components using the CAD designs we supply.

        We have established a diverse, approved supplier base that is skilled in medical device manufacturing. Our suppliers are primarily based in the United States. We do not have any long-term supply arrangements and purchase our supplies on a purchase order basis. We maintain a dual source capability for our purchased implant components in an effort to ensure supply reliability, flexibility and cost competitiveness. For certain raw materials, including the powders used for our 3D printing, we rely on sole source providers who service large portions of the markets for these materials.

        In the future, if and as the volume of our product sales increases, we expect to take the following steps in connection with our manufacturing activities:

116


Table of Contents

We also plan to explore other opportunities to reduce our manufacturing costs.

iFit 3D printing

        We believe that 3D printing is especially suited for production of our individually designed implants and instruments. We focus on 3D printing as a key element of our manufacturing because we believe it enables fast, cost-effective, and scalable processes that will deliver high quality implants and instruments customized to fit the unique anatomy of each patient. As a result, 3D printing plays a key and increasing role in our manufacturing operations.

        We currently apply our iFit 3D printing technology to manufacture iJigs using computer-controlled lasers that melt polymer powders into a solid on a layer-by-layer basis until the entire part is completed. The process of melting powders into a solid is called sintering. We use selective laser sintering, or SLS, with approved polymer powders to manufacture plastic components for our iJigs.

        We have received FDA clearance to apply our iFit 3D printing technology to manufacture the metal femoral implant component for our iTotal CR using direct metal laser sintering, or DMLS, using raw material that meets or exceeds the ASTM F-75 specification for chemical content and mechanical properties. ASTM F-75 is the accepted material standard for knee replacement femoral components. We plan to scale-up our 3D printing of the femoral component of our iTotal CR beginning in 2015.

        We expect to use a portion of the net proceeds of this offering to significantly expand our 3D printing capacity. Because we are able to operate our 3D printers on a near continuous basis with a limited workforce and can add 3D printing capacity without large incremental infrastructure investments, we believe that we will see additional per unit cost savings as we scale-up our manufacturing using 3D printing.

Quality assurance

        We apply a variety of automated and manual quality controls to our iJigs, implant components and other instruments we supply to ensure that our products conform to their specifications. Members of our quality department also inspect our devices at various steps during the manufacturing cycle to facilitate compliance with specifications. Our quality department periodically audits our suppliers to ensure conformity with our specifications and with our policies and procedures for our devices.

        We and our suppliers are subject to extensive regulation by the FDA under its Quality System Regulations, or QSR. The QSR provide that manufacturers must establish and follow quality systems consistent with the QSR framework to ensure that their products consistently meet applicable requirements and specifications. In accordance with the QSR framework, we have validated or verified the processes used in the manufacturing and testing of our devices. Our Burlington and Bedford manufacturing facilities are FDA registered, and we believe they are compliant with the FDA's QSR. We are in the process of completing our validations of our Wilmington facility and expect to register the facility with the FDA in the second quarter of 2015. We have also received certification from the British Standards Institution, or BSI, a Notified Body to the International Standards Organization of our quality system. Certification by a Notified Body is a necessary element of obtaining CE Marking in the EU. We are subject to periodic, announced and unannounced inspections by BSI, the FDA, and other governmental agencies. We continue to monitor our quality system and management efforts in order to maintain our overall level of compliance. See "—Regulatory requirements" below.

117


Table of Contents

Intellectual property

        Protection of our intellectual property is an important priority for our company. Our success depends in part on our ability to obtain and maintain proprietary rights for our products and technology, to operate without infringing the proprietary rights of others and to prevent others from infringing our proprietary rights. We seek to protect our intellectual property position by, among other things, filing U.S. and certain foreign patent applications related to our products and technology where patent protection is available. We also rely on trade secrets, know-how, continuing technological innovation and in-licensing opportunities to develop and maintain our proprietary position.

        We typically seek patents on inventions relating to customized implants and iJigs, and on their methods of manufacture. We generally file patent applications in the United States, the major markets in the EU, and in select other commercially important countries. We typically rely on trade secret protection for our proprietary algorithms that we use to design customized implants and iJigs.

Patent rights

        As of May 31, 2015, we owned or exclusively in-licensed 163 issued patents around the world, including 112 patents issued in the United States and 51 foreign patents.

        As of May 31, 2015, we owned or exclusively in-licensed 309 patent applications, including 122 patent applications pending in the United States and 187 foreign patent applications.

118


Table of Contents

        Our patent portfolio covers a range of subject matter, including:

Licenses from others

        We are a party to several agreements under which we have licensed rights in certain patents, patent applications and other intellectual property. We enter into these agreements to augment our proprietary intellectual property portfolio. The licensed intellectual property covers some of the products that we are researching, developing and commercializing and some of the technologies that we use. These licenses impose certain license fee, royalty payment and diligence obligations on us. We expect to continue to enter into these types of license agreements in the future. We do not believe that any of these licenses are material to our business.

Patent litigation

        The medical device industry is characterized by the existence of a large number of patents and frequent litigation based on allegations of patent infringement. Patent litigation can involve complex factual and legal questions and its outcome is uncertain. Any claim relating to infringement of patents that is successfully asserted against us may require us to pay substantial damages. Even if we were to prevail, any litigation could be costly and time-consuming and would divert the attention of our management and key personnel from our business operations.

        Our business success will depend in part on our not infringing the intellectual property rights of others, including patents issued to our competitors and potential competitors. If our products are found to infringe the patents of others, our development, manufacture and sale of such potential products could be severely restricted or prohibited. In addition, our competitors may independently develop similar technologies. Because of the importance of our patent portfolio to our business, we may lose market share to our competitors if we fail to protect our intellectual property rights.

Licenses to others

        In September 2013, we filed suit in the U.S. District Court, District of Massachusetts against Wright Medical Technology, Inc., or Wright Technology, a wholly owned subsidiary of Wright Medical Group, Inc., or Wright Group. We refer to Wright Technology and Wright Group collectively as Wright Medical. The lawsuit alleged that Wright Technology's PROPHECY® knee and ankle systems infringe four of our patents. In January 2014, Wright Group transferred its orthopedic reconstruction division to Micro-Port Orthopedics, Inc., or MicroPort, a wholly owned subsidiary of MicroPort Scientific Corporation. In February 2014, we filed an amended complaint, naming MicroPort as an additional defendant, and alleging infringement by both defendants of an additional patent. We settled this lawsuit against Wright Medical and MicroPort in April 2015. As part of the settlement, we granted to MicroPort and Wright Medical the licenses described below. We believe that MicroPort and Wright Medical also entered into a separate indemnification agreement related to the licensed products transferred to MicroPort in January 2014.

119


Table of Contents

License agreement with MicroPort

        In April 2015, we entered into a worldwide license agreement with MicroPort. Under the terms of this license agreement, we granted a perpetual, irrevocable, non-exclusive license to MicroPort to use patient specific instrument technology covered by our patents and patent applications with off-the-shelf implants in the knee. This license does not extend to patient-specific implants. This license agreement provides for the payment to us of a fixed royalty at a high single to low double digit percentage of net sales on patient specific instruments and associated implant components in the knee, including MicroPort's Prophecy patient specific instruments used with its Advance and Evolution implant components. This license agreement also provided for a single lump-sum payment by MicroPort to us of low-single digit millions of dollars upon entering into the license agreement, which has been paid. This license agreement will expire upon the expiration of the last to expire of our patents and patent applications licensed to MicroPort, which currently is expected to occur in 2029.

License agreement with Wright Medical

        In April 2015, we entered into a non-exclusive, fully paid up, worldwide license agreement with Wright Medical. Under the terms of this license agreement, we granted a perpetual, irrevocable, non-exclusive license to Wright Medical to use patient-specific instrument technology covered by our patents and patent applications with off-the-shelf implants in the foot and ankle. This license does not extend to patient-specific implants. This license agreement provided for a single lump-sum payment by Wright Medical to us of mid-single digit millions of dollars upon entering into the license agreement, which has been paid. This license agreement will expire upon the expiration of the last to expire of the patents and patent applications licensed to Wright Medical, which currently is expected to occur in 2030.

Trademarks

        As of May 31, 2015 we have filed 130 trademark registrations in the United States and in other major markets worldwide, including the following marks: ConforMIS, iFit, iTotal, iDuo, and iUni. We have 43 trademark applications pending in the United States and in other major markets worldwide.

Competition

        The joint replacement industry is intensely competitive, subject to rapid change and sensitive to the introduction of new products or other market activities of industry participants. We face competition from many different sources, including major medical device companies.

        We compete with several large, well-known companies that dominate the market for orthopedic products, principally LVB Acquisition, Inc., doing business as Biomet Group, Inc., or Biomet, Zimmer Holdings, Inc., or Zimmer, which is expected to acquire Biomet in 2015, DePuy Orthopedics, Inc., or DePuy, a Johnson & Johnson company, Smith & Nephew, Inc., or Smith & Nephew, Stryker Corporation, or Stryker, and MicroPort. These competitors have significantly greater financial resources, larger sales forces and networks of distributors, a greater number of established relationships, some of which may be exclusive, with key orthopedic surgeons, hospitals and third-party payors, and greater experience in research and development, manufacturing, obtaining regulatory clearances and marketing approved products than we do. These companies also compete with us in acquiring technologies complementary to, or necessary for, the development of our products and recruiting and retaining qualified scientific, engineering and management personnel.

        We also compete with numerous other companies that are developing and marketing competitive joint replacement products, as well as companies exploring alternatives to joint replacement such as biologic cartilage repair systems.

120


Table of Contents

        We believe that the principal factors on which we compete with others in our market include:

        The prices that we charge our customers for our products vary from customer to customer based on such factors as the volume of product being purchased, geographic region, reimbursement environment and competitive factors. We believe that our current pricing for our products generally is within the same range as that of our principal competitors.

Regulatory requirements

        Our products are medical devices that are subject to extensive regulation by government authorities in the United States and in other countries and jurisdictions, including the EU. These governmental authorities regulate the marketing and distribution of medical devices in their respective geographies. The regulations cover the entire life cycle of the product, including the research, development, testing, manufacture, quality control, packaging, storage, labeling, advertising and promotion of the devices. In addition, post-approval monitoring and reporting, as well as import and export of medical devices, are subject to regulatory requirements. The processes for obtaining regulatory approvals or clearances in the United States and in foreign countries and jurisdictions, along with subsequent compliance with applicable statutes and regulations, require the expenditure of substantial time and financial resources.

Review, approval and clearance of medical devices in the United States

        Medical devices in the United States are strictly regulated by the FDA. Under the FDCA a medical device is defined as an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article, including a component part or accessory, which is, among other things: intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease, in man or other animals; or intended to affect the structure or any function of the body of man or other animals, and which does not achieve its primary intended purposes through chemical action within or on the body of man or other animals and which is not dependent upon being metabolized for the achievement of any of its primary intended purposes.

        Unless an exemption applies, a new medical device may not be marketed in the United States unless it has been cleared by the FDA through filing of a 510(k) premarket notification, or 510(k), or approved by the FDA pursuant to a premarket approval application, or PMA. The information that must be submitted to the FDA in order to obtain clearance or approval to market a new medical device varies depending on how the medical device is classified by the FDA. Medical devices are classified into one of three classes depending on the level of control necessary to assure the safety and effectiveness of the device. Class I devices have the lowest level or risk associated with them, and are subject to general controls, including labeling, premarket notification and adherence to the

121


Table of Contents

QSR. Class II devices are subject to general controls and special controls, including performance standards. Class III devices, which have the highest level of risk associated with them, are subject to most of the aforementioned requirements as well as to premarket approval. Most Class I devices and some Class II devices are exempt from the 510(k) requirement, although manufacturers of these devices are still subject to registration, listing, labeling and QSR requirements.

        To date, we have used exclusively the 510(k) premarket notification process to obtain regulatory clearance from the FDA for the marketing and sale of our joint replacement products in the United States. All of our currently marketed products are Class II devices marketed pursuant to 510(k) clearances. We expect that our iTotal Hip product will be classified as a Class II device for which we will seek 510(k) clearance.

510(k) premarket notification

        A 510(k) is a premarket submission made to the FDA to demonstrate that the proposed device to be marketed is at least as safe and effective (i.e., substantially equivalent) to another legally marketed device, or predicate device, that did not require premarket approval. In evaluating a 510(k), the FDA will determine whether the device has the same intended use as the predicate device, and (a) has the same technological characteristics as the predicate device, or (b) has different technological characteristics, and (1) the data supporting substantial equivalence contains information, including appropriate clinical or scientific data, if deemed necessary by the FDA, that demonstrates that the device is as safe and as effective as a legally marketed device, and (2) does not raise different questions of safety and effectiveness than the predicate device. Most 510(k)s do not require clinical data for clearance, but the FDA may request such data.

        The FDA seeks to review and act on a 510(k) within 90 days of submission, but it may take longer if the agency finds that it requires more information to review the 510(k). If the FDA concludes that a new device is not substantially equivalent to a predicate device, the new device will be classified in Class III and the manufacturer will be required to submit a PMA to market the product. With the enactment of the Food and Drug Administration Safety and Innovation Act, or the FDASIA, a de novo pathway is directly available for certain low to moderate risk devices that do not qualify for the 510(k) pathway due to the absence of a predicate device.

        Modifications to a 510(k)-cleared medical device may require the submission of another 510(k) or a PMA if the changes could significantly affect safety or effectiveness or constitute a major change in the intended use of the device. Modifications to a 510(k)-cleared device frequently require the submission of a traditional 510(k), but modifications meeting certain conditions may be candidates for FDA review under a Special 510(k). If a device modification requires the submission of a 510(k), but the modification does not affect the intended use of the device or alter the fundamental technology of the device, then summary information that results from the design control process associated with the cleared device can serve as the basis for clearing the application. A Special 510(k) allows a manufacturer to declare conformance to design controls without providing new data. When the modification involves a change in material, the nature of the "new" material will determine whether a traditional or Special 510(k) is necessary.

Premarket approval application

        The PMA process for approval to market a medical device is more complex, costly and time consuming than the 510(k) clearance procedure. A PMA must be supported by extensive data, including technical, preclinical, clinical, manufacturing, control and labeling information, that demonstrate the safety and effectiveness of the device for its intended use. After a PMA is submitted, the FDA has 45 days to determine whether it is sufficiently complete to permit a substantive review. If the PMA is complete, the FDA will file the PMA. The FDA is subject to performance goal review times for PMAs and may issue a decision letter as a first action on a PMA

122


Table of Contents

within 180 days of filing, but if it has questions, it will likely issue a first major deficiency letter within 150 days of filing. It may also refer the PMA to an FDA advisory panel for additional review, and will conduct a preapproval inspection of the manufacturing facility to ensure compliance with the QSR, either of which could extend the 180-day response target. In addition, the FDA may request additional information or request the performance of additional clinical trials before it will reconsider the approval of the PMA or as a condition of approval, in which case the trials must be completed after the PMA is approved.

        If the FDA's evaluations of both the PMA and the manufacturing facilities are favorable, the FDA will either issue an approval letter authorizing commercial marketing or an approvable letter that usually contains a number of conditions that must be met in order to secure final approval. If the FDA's evaluations are not favorable, the FDA will deny approval of the PMA or issue a not approvable letter. The agency may determine that additional clinical trials are necessary, in which case the PMA approval may be delayed while the trials are conducted and the data acquired are submitted in an amendment to the PMA. Even with additional trials, the FDA may not approve the PMA application. The PMA process, including the gathering of clinical and nonclinical data and the submission to and review by the FDA, can take several years, and the process can be expensive and uncertain. Moreover, even if the FDA approves a PMA, the agency can impose post-approval conditions that it believes necessary to ensure the safety and effectiveness of the device, including, among other things, restrictions on labeling, promotion, sale and distribution. After approval of a PMA, a new PMA or PMA supplement may be required for a modification to the device, its labeling or its manufacturing process. None of our products are currently approved under a PMA approval.

Investigational device exemption

        A clinical trial is typically required for a PMA and, in a small percentage of cases, the FDA may require a clinical study in support of a 510(k) submission. A manufacturer that wishes to conduct a clinical study involving the device is subject to the FDA's Investigational Device Exemption, or IDE, regulation. The IDE regulation distinguishes between significant and nonsignificant risk device studies and the procedures for obtaining approval to begin the study differ accordingly. Also, some types of studies are exempt from the IDE regulations. A significant risk device presents a potential for serious risk to the health, safety, or welfare of a subject. Significant risk devices are devices that are substantially important in diagnosing, curing, mitigating or treating disease or in preventing impairment to human health. Studies of devices that pose a significant risk require both FDA approval and an approval of an independent institutional review board, or IRB, prior to initiation of a clinical study. Nonsignificant risk devices are devices that do not pose a significant risk to the human subjects. A nonsignificant risk device study requires only IRB approval prior to initiation of a clinical study.

        An IDE application is considered approved 30 days after it has been received by the FDA, unless the FDA otherwise informs the sponsor prior to 30 calendar days from the date of receipt, that the IDE is approved, approved with conditions, or disapproved. The clinical trial must be conducted in accordance with applicable regulations, including but not limited to the FDA's IDE regulations and current good clinical practices. A clinical trial may be suspended by the FDA, the IRB or the sponsor at any time for various reasons, including a belief that the risks to the study participants outweigh the benefits of participation in the trial.

        To date, none of our submissions to the FDA have required the submission of clinical data. However, we have conducted and continue to conduct numerous post-market studies aimed at demonstrating the benefits of our customized knee replacement systems as compared to traditional off-the-shelf systems.

123


Table of Contents

Post-marketing restrictions and enforcement

        After a device is placed on the market, numerous regulatory requirements apply. These include: compliance with the QSR; labeling regulations, which prohibit the promotion of products for uncleared or unapproved or "off-label" uses and impose other restrictions on labeling; and medical device reporting obligations, which require that manufacturers investigate and report to the FDA adverse events, including deaths, or serious injuries that may have been or were caused by a medical device and malfunctions in the device that would likely cause or contribute to a death or serious injury if it were to recur.

        The failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may include any of the following sanctions: warning letters; fines, injunctions, and civil penalties; recall or seizure of our products; operating restrictions, partial suspension or total shutdown of production; refusal to grant 510(k) clearance or PMA approvals of new products; withdrawal of 510(k) clearance or PMA approvals; and criminal prosecution. To ensure compliance with regulatory requirements, medical device manufacturers are subject to market surveillance and periodic, pre-scheduled and unannounced inspections by the FDA, and these inspections may include the manufacturing facilities of subcontractors.

Review and approval of medical devices in the EU

        The European Union, or EU, consists of 28 member states and has a coordinated system for the authorization of medical devices. The EU Medical Devices Directive (Council Directive 93/42/EEC, as amended) sets out the basic regulatory framework for medical devices in the European Union. In the EU our medical devices must comply with the Essential Requirements in Annex I to the EU Medical Devices Directive, which we refer to as the Essential Requirements. Compliance with these requirements is a prerequisite to be able to affix the Certificate of Conformity mark, or CE Mark, to our medical devices, without which they cannot be marketed or sold in the European Economic Area, or EEA. To demonstrate compliance with the Essential Requirements we must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification. Except for low risk medical devices (Class I with no measuring function and which are not sterile), where the manufacturer can issue a CE Declaration of Conformity based on a self-assessment of the conformity of its products with the Essential Requirements, a conformity assessment procedure requires the intervention of a third-party organization designated by competent authorities of an EU country to conduct conformity assessments, which is referred to as a Notified Body. The Notified Body would typically audit and examine products' technical file and the quality system for the manufacture, design and final inspection of the devices before issuing a CE Certificate of Conformity demonstrating compliance with the relevant Essential Requirements.

        To date, we have used the CE Marking process to satisfy the conformity standards required to market and sell our joint replacement products in the EU. The Notified Body that has conducted conformity assessments with respect to our joint replacement products is the BSI.

        Medical device manufacturers must carry out a clinical evaluation of their medical devices to demonstrate conformity with the relevant Essential Requirements. This clinical evaluation is part of the product's technical file. A clinical evaluation includes an assessment of whether a medical device's performance is in accordance with its intended use, that the known and foreseeable risks linked to the use of the device under normal conditions are minimized and acceptable when weighed against the benefits of its intended purpose. The clinical evaluation conducted by the manufacturer must also address any clinical claims, the adequacy of the device labeling and information (particularly claims, contraindications, precautions and warnings) and the suitability of related instructions for use. This assessment must be based on clinical data, which can be obtained from clinical studies conducted on the devices being assessed, scientific literature from similar

124


Table of Contents

devices whose equivalence with the assessed device can be demonstrated or both clinical studies and scientific literature.

        With respect to implantable devices or devices classified as Class III in the EU, the manufacturer must conduct clinical studies to obtain the required clinical data, unless reliance on existing clinical data from similar devices can be justified. As part of the conformity assessment process, depending on the type of devices, the Notified Body will review the manufacturer's clinical evaluation process, assess the clinical evaluation data of a representative sample of the devices' subcategory or generic group, or assess all the clinical evaluation data, verify the manufacturer's assessment of that data and assess the validity of the clinical evaluation report and the conclusions drawn by the manufacturer. The conduct of clinical studies to obtain clinical data that might be required as part of the described clinical evaluation process can be expensive and time-consuming. To date, we have not been required to conduct any of these clinical studies to obtain clinical data as part of the clinical evaluation process.

        Even after we receive a CE Certificate of Conformity enabling us to affix the CE Mark on a product and to sell our product in the EEA countries, a Notified Body or a competent authority may require post-marketing studies of our product. Failure to comply with such requirements in a timely manner could result in the withdrawal of our CE Certificate of Conformity and the recall or withdrawal of our product from the market in the EU, which would prevent us from generating revenue from sales of that product in the EEA. Moreover, each CE Certificate of Conformity is valid for a maximum of five years, but more commonly three years. Our current CE Certificates of Conformity are valid through August 5, 2016 for our iTotal CR product, February 12, 2017 for our iUni product, June 11, 2019 for our iDuo product and March 5, 2020 for our iTotal PS product. At the end of each period of validity we are required to apply to the Notified Body for a renewal of the CE Certificate of Conformity. There may be delays in the renewal of the CE Certificate of Conformity or the Notified Body may require modifications to our products or to the related Technical Files before it agrees to issue the new CE Certificate of Conformity.

        In addition, we must inform the Notified Body that carried out the conformity assessment of the medical devices we market or sell in the EEA of any planned substantial changes to our devices that could affect compliance with the Essential Requirements or the devices' intended purpose. The Notified Body will then assess the changes and verify whether they affect the products' conformity with the Essential Requirements or the conditions for the use of the devices. If the assessment is favorable, the Notified Body will issue a new CE Certificate of Conformity or an addendum to the existing CE Certificate of Conformity attesting compliance with the Essential Requirements. If it is not, we may not be able to continue to market and sell the product in the EEA.

        On September 26, 2012, the European Commission adopted a package of legislative proposals designed to replace the existing regulatory framework for medical devices in the EU. These proposals provide for a revision of the current regulatory framework for medical devices in the EU to strengthen patient safety, transparency and product traceability. The proposals, for instance, include reinforced rules governing clinical evaluation throughout the life of the device, improved traceability of devices in the supply chain, including a phased and risk-based introduction of unique device identification, or UDI, improved market surveillance and vigilance, as well as better co-ordination between national regulators, increased powers for Notified Bodies to undertake unannounced inspections and strengthened supervision of Notified Bodies by member states. The European Commission's proposals may undergo significant amendments as they are reviewed by the European Council and European Parliament as part of the EU legislative process. If and when adopted, the proposed new legislation may prevent or delay the EU approval or clearance of our products under development or may impact our ability to modify our currently EU approved or cleared products on a timely basis and impose additional costs relating to clinical evaluation, vigilance and product traceability.

125


Table of Contents

Marketing and sales considerations in the EU

        In the EU, medical devices may be promoted only for the intended purpose for which the devices have been CE Marked. Failure to comply with this requirement could lead to the imposition of penalties by the competent authorities of the EU Member States. The penalties could include warnings, orders to discontinue the promotion of the medical device, seizure of the promotional materials and fines. Promotional materials must also comply with various laws and codes of conduct developed by medical device industry bodies in the EU governing promotional claims, comparative advertising, advertising of medical devices reimbursed by the national health insurance systems and advertising to the general public.

Product vigilance and post-approval monitoring in the EU

        Additionally, all manufacturers placing medical devices into the market in the EU are legally bound to report any serious or potentially serious incidents involving devices they produce or sell to the competent authority in whose jurisdiction the incident occurred. In the EU, manufacturers must comply with the EU Medical Device Vigilance System. Under this system, incidents must be reported to the relevant authorities of the EU countries, and manufacturers are required to take field safety corrective actions, or FSCAs, to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. See "Risk Factors—Risks related to regulatory approval—If our products, or malfunction of our products, cause or contribute to a death or a serious injury, we will be subject to medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions."

Third-party reimbursement

        In the United States and most other major joint implant markets, third-party payors, including government health programs, commercial health insurers and managed care organizations, reimburse hospitals and other medical facilities an aggregate amount for all elements of a joint replacement procedure, including operating room time, patient care and the joint replacement product. As a result, our products generally are not reimbursed separately, but instead are subject to the limits imposed by third-party payors on the coverage and reimbursement of procedures that utilize our products.

        Sales of our products will depend, in part, on the extent to which the costs of such procedures involving the use of our products cleared by the FDA and approved by other government authorities will be covered by third-party payors, including government health programs in the United States, such as Medicare and Medicaid, commercial health insurers and managed care organizations. The process for determining whether a payor will provide coverage for a particular procedure may be separate from the process for setting the price or reimbursement rate that the payor will pay for the procedure once coverage is approved. Third party payors may limit coverage to particular procedures on an approved list, or formulary, which might not include all of the approved procedures involving the use of our products for a particular indication.

        In the EU, pricing and reimbursement schemes vary widely from country to country. In many foreign markets, pricing of medical devices is subject to governmental control. In the United States, there have been, and we expect that there will continue to be, a number of federal and state proposals to limit payments by governmental payors for medical devices, and the procedures in which medical devices are used. While we cannot predict whether such legislative or regulatory proposals will be adopted, the adoption of such proposals could have a material adverse effect on our business, financial condition and profitability.

126


Table of Contents

Healthcare laws and regulations

        Healthcare providers, physicians and third-party payors play a primary role in the recommendation and selection of medical devices for patients. Arrangements with third-party payors and customers are subject to broadly applicable fraud and abuse and other healthcare laws and regulations. Such restrictions under applicable federal and state healthcare laws and regulations include the following:

        State and foreign laws also govern the privacy and security of health information in some circumstances, many of which differ from each other in significant ways and often are not preempted by HIPAA, thus complicating compliance efforts.

Employees

        As of May 31, 2015, we had 353 full-time employees, 87 of whom were engaged in sales and marketing, 33 in research and development, 158 in manufacturing and service, 40 in regulatory, clinical affairs and quality activities and 35 in general administrative and accounting activities. None of our employees are covered by a collective bargaining agreement. We consider our relationship with our employees to be good.

127


Table of Contents

Facilities

        Our principal facilities consist of office space and manufacturing facilities in Bedford, Burlington and Wilmington, Massachusetts. We occupy approximately 90,000 square feet of office and manufacturing space in Bedford, Massachusetts under a lease that expires in April 2017. We occupy approximately 29,000 square feet of manufacturing space in Burlington, Massachusetts under a lease that expires in July 2015. We occupy approximately 41,000 square feet of manufacturing space in Wilmington, Massachusetts under a lease that expires in April 2021. We do not intend to renew our lease for the facility in Burlington, Massachusetts when it expires in July 2015, although we expect to remain in the facility through August 2015. We are transferring our activities at our Burlington, Massachusetts facility to our facility in Wilmington, Massachusetts.

Legal proceedings

        The manufacture and sale of joint replacement products is subject to routine risk of product liability and patent infringement claims. We recently settled a lawsuit against Wright Medical and MicroPort for infringement of four of our patents relating to patient-specific instrumentation. See "—Intellectual Property—Patent litigation." We currently are not a party to any other material legal proceedings.

128


Table of Contents


MANAGEMENT

        The following table sets forth the name, age and positions of each of our executive officers, key employees and directors as of June 15, 2015 and the composition of the committees of our board of directors listed below as of the effectiveness of the registration statement of which this prospectus forms a part.

Name
 
Age
 
Position(s)

Executive Officers

       

Philipp Lang, M.D.(4)

 

52

 

President and Chief Executive Officer and Director

Paul Weiner

 

51

 

Chief Financial Officer

Daniel Steines, M.D., M.S.

 

46

 

Chief Technology Officer

David Cerveny

 

48

 

Chief Legal Officer and General Counsel

Robert Law III

 

51

 

Senior Vice President, Sales

Matthew Scott

 

40

 

Senior Vice President, Operations

Key Employees

 

 

 

 

Amita Shah, M.S.

 

61

 

Senior Vice President, Regulatory and Quality Affairs

John Slamin

 

61

 

Senior Vice President, Knee Implant Engineering

Adam Hayden

 

42

 

Senior Vice President, Marketing

Ricky Paxton

 

60

 

Vice President, Sales, Eastern U.S. and Area Vice President, Southeast U.S.

Non-Employee Directors

 

 

 

 

Kenneth Fallon III(3)

 

76

 

Director and Chairman of the Board of Directors

Bradley Langdale(1)(2)

 

51

 

Director

Colm Lanigan(2)

 

49

 

Director

Richard Meelia

 

66

 

Director

Michael Milligan(1)(3)

 

51

 

Director

Frank Mühlenbeck, Ph.D.(3)

 

44

 

Director

Aditya Puri(2)(4)

 

44

 

Director

Laurent Souviron(1)

 

48

 

Director


(1)
Member of audit committee.

(2)
Member of compensation committee.

(3)
Member of the nominating and corporate governance committee.

(4)
Member of the Asia strategy committee.

129


Table of Contents

        The following is a brief biography of each of our executive officers, key employees and non-employee directors:

Executive officers

        Philipp Lang, M.D. is our founder and has served on our board of directors since March 2004, including as Chairman of our board of directors from March 2004 to February 2015. He has also served as our Chief Executive Officer since January 2008. He was also the founder of ImaTx, Inc., one of our wholly-owned subsidiaries, which focuses on osteoporosis screening. He previously held positions as the director of the musculoskeletal radiology unit at Brigham and Women's Hospital and Associate Professor at Harvard Medical School from September 2001 to September 2008 and as Distinguished Weissman Chair from May 2006 to September 2008. Dr. Lang has an M.B.A. from the University of California, Los Angeles Anderson School of Management and an M.D. from Albert-Ludwigs University, Freiburg School of Medicine in Germany. Dr. Lang has provided strategic leadership as an inventor of technology underlying more than 300 patents and patent applications in the United States and abroad. We believe that Dr. Lang is uniquely qualified to serve on our board of directors due to his institutional knowledge of our company as its founder as well as his extensive experience in the medical device industry.

        Paul Weiner has served as our Chief Financial Officer since April 2014. Prior to joining us, Mr. Weiner spent 18 years at Palomar Medical Technologies, Inc., or Palomar, a company engaged in research, development, manufacturing and sales of medical laser devices for aesthetic treatments, prior to its acquisition by Cynosure, Inc. He served in a number of roles at Palomar, including corporate controller, vice president of finance and, finally, chief financial officer, a position he held for 11 years. Prior to Palomar, Mr. Weiner was the chief financial officer at Hygenetics Environmental Services, Inc., an environmental consulting company, and worked in public accounting for Ernst & Young and Wolf & Company. Mr. Weiner is a Certified Public Accountant and has a B.S. in Accounting from Bryant University.

        Daniel Steines, M.D., M.S. has served as our Chief Technology Officer since June 2014. From July 2004 to June 2014, he was our Senior Vice President of Research & Development. Prior to joining us, he served as the Senior Vice President of Research & Development for ImaTx, Inc., one of our wholly-owned subsidiaries, from September 2001 to July 2004, where he was responsible for the development of image analysis applications for the diagnosis of osteoarthritis and osteoporosis. Prior to that, he held research positions at Stanford University and The Charité, Universitätsmedizin in Berlin, working in the areas of new imaging techniques to assess osteoarthritis and articular cartilage as well as novel medical video applications. Dr. Steines has an M.S. in computer science from the Technical University and an M.D. from the Technical University of Aachen.

        David Cerveny has served as our Chief Legal Officer and General Counsel since October 2008. Prior to joining us, Mr. Cerveny was the chief intellectual property counsel for Palomar, where he managed an extensive patent portfolio, active patent litigation and licensing strategy. He also was previously a partner at Hale and Dorr LLP, now Wilmer Cutler Pickering Hale and Dorr LLP, and an associate at Proskauer Rose LLP. Prior to law school, Mr. Cerveny worked as a systems engineer developing flight control systems for McDonnell Douglas Corporation, an aerospace manufacturing corporation now part of The Boeing Company. Mr. Cerveny has a B.S. in biomedical engineering from Marquette University and a J.D. from Boston College Law School.

        Robert Law III has served as our Senior Vice President, Sales since January 2012. From February 2008 to January 2012, he served as our Vice President of Sales, U.S. Western Region, and since April 2007, has served as a member of our sales management team. Before joining us, Mr. Law was a partner in CORE Outpatient Services, a medical device distributor. Mr. Law began his medical device career at SportsWorld Orthopedics, Inc., a medical device and post-surgical rehabilitation product distributor, where he held various senior executive roles including vice

130


Table of Contents

president of sales. Mr. Law has a B.S. with an emphasis in Kinesiology from Kansas State University.

        Matthew Scott has served as our Senior Vice President, Operations since April 2013. Prior to joining us, Mr. Scott was the director of operations at Zimmer Dental Inc., a medical device company specializing in dental products, from April 2010 to April 2013, where he led all operations functions, including global supply chain management, production management and manufacturing engineering. Prior to that, Mr. Scott was director of global operations at Zimmer Holdings, Inc., Zimmer Dental's parent company, from March 2006 to April 2010 where he was responsible for site startup and manufacturing transfers and global continuous improvement programs. Mr. Scott had over 11 years of manufacturing and engineering management experience at Zimmer. Mr. Scott began his career with General Electric Company as a member of the technical leadership program. Mr. Scott has a B.S. in Mechanical Engineering Technology from Purdue University.

Key employees

        Adam Hayden has served as our Senior Vice President, Marketing since April 2015, with responsibility for our international sales, product management, corporate communications, meetings and events and medical education outreach. From June 2013 to April 2015, he served as our Vice President, Marketing. From May 2012 to May 2013, he led our knee product management efforts. Prior to joining us, Mr. Hayden held various senior marketing positions from May 2007 to December 2011 at Smith & Nephew, a medical device company specializing in joint replacement products, including director of marketing responsible for global biomaterials franchise. From May 2002 to May 2007, he also held senior marketing positions at Johnson & Johnson's Orthopaedic Division, now DePuy Orthopedics, Inc., or Depuy. Prior to his career in orthopedics, Mr. Hayden served as a Captain in the U.S. Army. Mr. Hayden has a B.S. in Mechanical Engineering from Cornell University, an M.B.A. from the University of Colorado and an M.S. in Biomedical Engineering from the University of Michigan.

        Ricky Paxton has served as our Vice President, Sales, Eastern U.S. since February 2014, with responsibility for all aspects of sales management for the Eastern United States regions, and Area Vice President, Southeast U.S. since January 2013. From April 2011 to December 2012, he was a member of our Regional Sales Management team. From February 2000 to April 2011, Mr. Paxton served in various sales and sales management positions at GlaxoSmithKline plc, or GSK, a global healthcare company. Prior to GSK, Mr. Paxton served as a regional sales manager at NeuroMetrix, Inc., a medical device distributor, and a sales representative in the Patient Care Division of Procter & Gamble Co., a global manufacturer of household products. Mr. Paxton has a B.S.B.A. with a Business Law concentration from Western Carolina University.

        Amita Shah, M.S. has served as our Senior Vice President, Regulatory and Quality Affairs since August 2008, with responsibility for quality assurance and regulatory affairs functions. Prior to joining us, Ms. Shah served as director of quality assurance and regulatory affairs at ESA Biosciences, Inc., a diagnostic medical device company, from January 2008 to July 2008, where she led and managed the company's quality assurance and regulatory affairs activities. Prior to that, Ms. Shah served as the director of quality affairs at Confluent Surgical Inc., a cranial and spinal sealant company. Ms. Shah also has over a decade of experience in cardiovascular devices with C.R. Bard, Inc., a medical device company, where she advanced through positions of increasing responsibility in the quality assurance and regulatory affairs functions. Ms. Shah has a B.S. in Biology and Chemistry and an M.S. in Organic Chemistry, both from Kanpur University in India, as well as a Regulatory Affairs Certification from the Regulatory Affairs Professionals Society.

        John Slamin has served as our Senior Vice President, Knee Implant Engineering since October 2007, with responsibility for overseeing all product engineering and development of our knee implants. Before joining us, Mr. Slamin spent more than 30 years in research and development at

131


Table of Contents

Johnson & Johnson's Orthopaedic Division, now DePuy, where he was responsible for product development activities. Mr. Slamin is the holder of seven patents related to knee implant engineering. Mr. Slamin has an Associate Degree in Mechanical Engineering from Wentworth Institute of Technology in Boston, Massachusetts.

Non-employee directors

        Kenneth Fallon III has served as a member of our board of directors since January 2005, including as Chairman of our board of directors since February 2015. Mr. Fallon retired from active employment in March 2003. From time to time between March 2004 to June 2009, Mr. Fallon served as an advisor to Kairos Partners, an investment firm. Mr. Fallon retired as the chairman of the board of Axya Medical, Inc., a medical device company, in March 2003. Prior to that, Mr. Fallon also served as the chief executive officer of Axya Medical, Inc.; as president of the surgical business at Haemonetics Corporation, a manufacturer of blood processing technology; as chief executive officer and chairman of the board of UltraCision, Inc., a developer and manufacturer of ultrasonically powered surgical instruments; as president and chief executive officer of American Surgical Technologies Corporation, a company that manufactures laparoscopic viewing systems; as president, U.S. operations of Zimmer, Inc., a joint replacement company and then a subsidiary of Bristol-Myers Squibb Company; as president of Zimmer's Orthopaedic Implant Division and as its vice president of marketing and positions of significant responsibility with the Codman and Orthopaedic Divisions of Johnson & Johnson, a global healthcare company. Mr. Fallon also served as a member of the board of directors of Osteotech, Inc.,a company that produces bone graft materials for spinal procedures, between 1995 and 2010, including serving as chairman from April 2005 to August 2010, until it was acquired by Medtronic, Inc. Mr. Fallon has a B.B.A. degree in marketing from the University of Massachusetts and an M.B.A. from Northeastern University. We believe that Mr. Fallon is qualified to serve on our board of directors due to his experience in the medical device industry, particularly his experience serving as the chief executive officer and a member of the board of directors of several medical device companies.

        Bradley Langdale has served as a member of our board of directors since May 2008. From February 1996 until his retirement from active employment in December 2007, Mr. Langdale served in various roles at Masimo Corporation, a noninvasive monitoring technology company, including executive vice president, chief financial officer and executive vice president, chief marketing officer. In addition, Mr. Langdale previously served as director of finance for CareLine, Inc., an emergency medical services provider; manager of financial forecasting for Sunrise Company, a private real estate development company; and as a senior accountant for Price Waterhouse & Company LLP (now PricewaterhouseCoopers LLP), a global professional services organization. Mr. Langdale is a Certified Public Accountant and has a B.A. in Economics/Business from the University of California, Los Angeles. We believe that Mr. Langdale is qualified to serve on our board of directors due to his extensive management, accounting and business experience.

        Colm Lanigan has served as a member of our board of directors since July 2013. Since October 2012, Mr. Lanigan has been a senior investment professional at the Abu Dhabi Investment Authority, a sovereign wealth fund and parent company of Procific. From February 2006 to July 2011, Mr. Lanigan served as the chief executive officer at Tara Technologies Corporation, a manufacturing company in the semiconductor, aerospace, energy and medical markets, which was subsequently acquired by EnPro Industries, Inc. His prior experience includes service as Managing Director at Caxton-Iseman Capital, a private equity fund, and as a managing partner at Tara Capital Management, a hedge fund sponsor. Mr. Lanigan has a B.Sc. from the University of Toronto and a J.D./L.L.B. from the University of Toronto Law School. We believe that Mr. Lanigan is qualified to serve on our board of directors due to his extensive investment and capital raising experience across multiple industries.

132


Table of Contents

        Richard Meelia has served as a member of our board of directors since June 2015. Since July 2011, Mr. Meelia has served as a principal of Meelia Ventures, LLC, a private equity firm focused on early stage healthcare companies. From July 2007 to July 2011, Mr. Meelia served as president and chief executive officer of Covidien plc, a global healthcare products company, which was formerly known as Tyco Healthcare prior to its separation from Tyco International, a healthcare security company, in June 2007. From January 1995 through its separation from Tyco International in June 2007, Mr. Meelia served as the president of Tyco Healthcare. From January 1991 to January 1995, Mr. Meelia served as the group president of Kendall Healthcare Products Company, a medical products manufacturer and the foundation of the Tyco Healthcare business. Since July 2011, Mr. Meelia has served as chairman of the board of directors of Haemonetics Corporation, a global provider of blood and plasma supplies and services. He also currently serves as chairman of the board of Apollo Endosurgery Inc., a private company focused on the development of devices that advance therapeutic endoscopy, and as a member of several charitable boards, including Tufts Medical Center and St. Anselm College. In addition, Mr. Meelia served as chairman of the board of directors of Covidien plc from October 2008 to March 2012. Mr. Meelia has a B.A. from Saint Anselm College and an M.B.A. from Boston College. We believe Mr. Meelia is qualified to serve on our board of directors due to his years of leadership experience in the global healthcare industry.

        Michael Milligan has served as a member of our board of directors since November 2011. Since October 2002, Mr. Milligan has served as president and chief executive officer at Axel Johnson Inc., a private industrial and investment company. Prior to joining Axel Johnson Inc., Mr. Milligan spent 17 years as a partner and member of the board of directors of Monitor Group, a global consulting and merchant banking firm. In addition, Mr. Milligan is chairman of the board of directors of Sprague Resources Limited Partners, a supplier of energy and materials handling services in the Northeast United States and is a member of the board of directors of Cadence Inc., a supplier of advanced products, technologies and services to medical, life science, automotive, and industrial companies, Decisyon Inc., an enterprise software company, Kinetico Incorporated, a residential and commercial water treatment systems provider, Parkson Corporation, a provider of engineered solutions for municipal and industrial water treatment, and Walk2Campus Holdings, LLC, a real estate investment company providing student housing in proximity to public universities. Mr. Milligan has an A.B. from Bowdoin College and an M.B.A. from Harvard University. We believe that Mr. Milligan is qualified to serve on our board of directors due to his extensive business and investment experience across a broad range of disciplines and industry sectors.

        Frank Mühlenbeck, Ph.D., has served as a member of our board of directors since May 2009. Since November 2006, Dr. Mühlenbeck has served as a partner at aeris CAPITAL, a private investment office advising high-net-worth individuals. At aeris he heads up a team responsible for private and public equity investments in life sciences companies. In this capacity, Dr. Mühlenbeck serves on different boards of life science companies in Europe and the United States, including Affimed N.V., an antibody-drug development company, Solstice Biologics Inc., a ribonucleic acid interference therapeutics company, and Curetis AG, a molecular diagnostics company. Dr. Mühlenbeck earned a Ph.D. in cell biology and immunology from Stuttgart University. We believe that Mr. Mühlenbeck is qualified to serve on our board of directors due to his diverse business background with life sciences companies and wealth management.

        Aditya Puri has served as a member of our board of directors since December 2011. Mr. Puri has served as an investments director at Xeraya Capital, which is responsible for life sciences investments for Khazanah Nasional Berhad, the Malaysian government's strategic investment fund, since October 2012. Previously, he was a director in Khazanah Nasional's Life Sciences group since November 2011. Prior to that, Mr. Puri consulted part-time in the greater Boston area for various healthcare and cleantech startups affiliated with Harvard University and Massachusetts Institute of Technology, or MIT, from August 2009 to September 2011. Previously, Mr. Puri also served as managing director of global development at Salary.com, a skills management software company,

133


Table of Contents

and as a vice president of the Yankee Group, an information technology research and advisory company. Mr. Puri serves on several boards of directors of private companies in the investment and healthcare fields, including Viewray Incorporated, a medical device company. Mr. Puri has a B.S. from the University of Southern Maine and an M.B.A. from the MIT Sloan School of Management. We believe Mr. Puri is qualified to serve on our board of directors because of his extensive experience in life sciences and other areas of growth investment.

        Laurent Souviron has served as a member of our board of directors since November 2011. Since September 2009, Mr. Souviron has served as managing director of AGC Equity Partners, an alternative investment firm. Prior to joining AGC Equity Partners, Mr. Souviron was a managing director at Morgan Stanley, a financial services corporation, in London and started his career with Morgan Stanley in New York. He also previously served as a managing director with the SUN Group, a private equity company. Mr. Souviron has a B.S. in Operations Research and an M.B.A. in Finance from Columbia University. We believe Mr. Souviron is qualified to serve on our board of directors because of his extensive international finance and capital raising experience.

Board composition

        Our board of directors currently consists of nine members. Our directors hold office until their successors have been elected and qualified or until the earlier of their resignation or removal.

        Our restated certificate of incorporation and amended and restated bylaws that will become effective upon the closing of this offering provide that the authorized number of directors may be changed only by resolution of the board of directors. Our restated certificate of incorporation and amended and restated bylaws that will become effective upon the closing of this offering also provide that our directors may be removed only for cause by the affirmative vote of the holders of at least 75% of the votes that all our stockholders would be entitled to cast in an annual election of directors, and that any vacancy on our board of directors, including a vacancy resulting from an enlargement of our board of directors, may be filled only by vote of a majority of our directors then in office.

        In accordance with the terms of our restated certificate of incorporation and bylaws that will become effective upon the closing of this offering, our board of directors will be divided into three classes, class I, class II and class III, with members of each class serving staggered three-year terms. Upon the closing of this offering, the members of the classes will be divided as follows

        Upon the expiration of the term of a class of directors, directors in that class will be eligible to be elected for a new three-year term at the annual meeting of stockholders in the year in which their term expires.

        We have no formal policy regarding board diversity. Our priority in selection of board members is identification of members who will further the interests of our stockholders through his or her established record of professional accomplishment, the ability to contribute positively to the collaborative culture among board members, knowledge of our business and understanding of the competitive landscape.

        We have entered into a Sponsor Designee Recommendation Agreement with Procific, or the Procific Agreement, which will become effective upon the closing of this offering. The Procific

134


Table of Contents

Agreement provides that, in the event that Colm Lanigan should cease to serve as a member of our board of directors prior to the expiration of his term upon the commencement of our 2017 annual meeting of stockholders, prior to filling such vacancy, Procific will have the opportunity to recommend to our nominating and corporate governance committee an individual to fill such vacancy and to serve for the balance of Mr. Lanigan's incompleted term. Procific will no longer have rights under the Procific Agreement at such time as Procific and its affiliates no longer beneficially own at least 5% of the outstanding shares of our common stock. In addition, the Procific Agreement will terminate upon the earlier to occur of (a) a change of control, as defined in the Procific Agreement, (b) Procific's delivery of written notice to us requesting termination and (c) the commencement of our 2017 annual meeting of stockholders.

        The classification of our board of directors may have the effect of delaying or preventing changes in our control or management. See "Description of Capital Stock—Anti-takeover effects of Delaware law and our charter and bylaws."

Director Independence

        Rule 5605 of the NASDAQ Listing Rules requires a majority of a listed company's board of directors to be comprised of independent directors within one year of listing. In addition, the NASDAQ Listing Rules require that, subject to specified exceptions, each member of a listed company's audit, compensation and nominating and corporate governance committees be independent and that audit committee members also satisfy independence criteria set forth in Rule 10A-3 under the Securities Exchange Act of 1934, as amended, or the Exchange Act.

        Under Rule 5605(a)(2) of the NASDAQ Listing Rules, a director will only qualify as an "independent director" if, in the opinion of our board of directors, that person does not have a relationship that would interfere with the exercise of independent judgment in carrying out the responsibilities of a director. In order to be considered independent for purposes of Rule 10A-3, a member of an audit committee of a listed company may not, other than in his or her capacity as a member of the audit committee, the board of directors or any other board committee: (1) accept, directly or indirectly, any consulting, advisory or other compensatory fee from the listed company or any of its subsidiaries; or (2) be an affiliated person of the listed company or any of its subsidiaries. In addition, in affirmatively determining the independence of any director who will serve on a company's compensation committee, Rule 10C-1 under the Exchange Act requires that a company's board of directors consider all factors specifically relevant to determining whether a director has a relationship to such company which is material to that director's ability to be independent from management in connection with the duties of a compensation committee member, including, but not limited to: (1) the source of compensation of the director, including any consulting, advisory or other compensatory fee paid by such company to the director; and (2) whether the director is affiliated with the company or any of its subsidiaries or affiliates.

        In May 2015 our board of directors undertook a review of the composition of our board of directors and its committees and the independence of each director. Based upon information requested from and provided by each director concerning his or her background, employment and affiliations, including family relationships, our board of directors has determined that each of our directors, with the exception of Dr. Lang, is an "independent director" as defined under Rule 5605(a)(2) of the NASDAQ Listing Rules. Our board of directors also determined that Bradley Langdale, Michael Milligan and Laurent Souviron, who will comprise our audit committee following this offering, and Bradley Langdale, Colm Lanigan and Aditya Puri, who will comprise our compensation committee following this offering, satisfy the independence standards for such committees established by the SEC and the NASDAQ Listing Rules, as applicable. In making such determinations, our board of directors considered the relationships that each such non-employee director has with our company and all other facts and circumstances our board of directors

135


Table of Contents

deemed relevant in determining independence, including the beneficial ownership of our capital stock by each non-employee director.

        There are no family relationships among any of our directors or executive officers.

Board committees

        Our board of directors has established an audit committee, a compensation committee and a nominating and corporate governance committee, each of which will, upon the effectiveness of the registration statement of which this prospectus forms a part, operate under a charter that has been approved by our board of directors. Our board also has established an Asia strategy committee which will remain in existence until the second anniversary of the closing of the offering contemplated by the registration statement of which this prospectus forms a part. The composition of each committee will be effective upon effectiveness of the registration statement of which this prospectus forms a part. Members serve on these committees until their resignation or until otherwise determined by our board of directors. Our board of directors may establish other committees to facilitate the management of our business.

Audit committee

        The members of our audit committee will be Bradley Langdale, Michael Milligan and Laurent Souviron. Mr. Langdale will be the chair of the audit committee. Our board of directors has determined that each of these directors is independent within the meaning of Rule 10A-3 under the Exchange Act. In addition, our board of directors has determined that Mr. Langdale qualifies as an audit committee financial expert within the meaning of SEC regulations and the NASDAQ Listing Rules. In making this determination, our board has considered the formal education and nature and scope of his previous experience, coupled with past and present service on various audit committees. Our audit committee assists our board of directors in its oversight of our accounting and financial reporting process and the audits of our financial statements. Our audit committee's responsibilities will include:

136


Table of Contents

        All audit services to be provided to us and all non-audit services, other than de minimis non-audit services, to be provided to us by our registered public accounting firm must be approved in advance by our audit committee.

Compensation committee

        The members of our compensation committee will be Bradley Langdale, Colm Lanigan and Aditya Puri. Mr. Langdale will be the chair of the compensation committee. Our compensation committee assists our board of directors in the discharge of its responsibilities relating to the compensation of our executive officers. The compensation committee's responsibilities will include:

Nominating and corporate governance committee

        The members of our nominating and corporate governance committee will be Kenneth Fallon III, Michael Milligan and Frank Mühlenbeck. Mr. Fallon will be the chair of the nominating and corporate governance committee. The nominating and corporate governance committee's responsibilities will include:

Asia strategy committee

        Prior to the effectiveness of the registration statement of which this prospectus forms a part, the members of our Asia strategy committee were Philipp Lang, Kenneth Fallon III, Bradley Langdale and Aditya Puri. Dr. Lang was the chair of the Asia Strategy Committee. Effective upon the effectiveness of the registration statement of which this prospectus forms a part, the members of our Asia strategy committee will be Mr. Puri and Dr. Lang. Mr. Puri will be chair of the Asia strategy committee.

        The Asia strategy committee will have the authority to oversee our business development activities in Asia. It will remain in existence until the second anniversary of the closing of the offering contemplated by the registration statement of which this prospectus forms a part.

137


Table of Contents

Compensation committee interlocks and insider participation

        None of our executive officers serves, or in the past has served, as a member of the board of directors or compensation committee, or other committee serving an equivalent function, of any entity that has one or more executive officers who serve as members of our board of directors or our compensation committee. None of the members of our compensation committee is an officer or employee of our company, nor have they ever been an officer or employee of our company.

Code of business conduct and ethics

        We have adopted a written code of business conduct and ethics that applies to our directors, officers and employees, including our principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions. We intend to post on our website, www.conformis.com, a current copy of the code and all disclosures that are required by law or NASDAQ stock market listing standards concerning any amendments to, or waivers from, any provision of the code.

138


Table of Contents


EXECUTIVE COMPENSATION

        This section discusses the material elements of compensation awarded to, earned by or paid to our named executive officers in 2014. Our named executive officers for 2014 were Philipp Lang, who served as our President and Chief Executive Officer, Paul Weiner, who served as our Chief Financial Officer, and Daniel Steines, who served as our Chief Technology Officer. This section also includes qualitative information regarding the manner and context in which compensation is awarded to and earned by our named executive officers and is intended to place in perspective the data presented in the following tables and the corresponding narrative.

Summary compensation table

        The following table sets forth information regarding compensation awarded to, paid to or earned by our named executive officers during 2014.

Name
  Year   Salary
($)
  Option
awards
($)(1)
  All other
compensation
($)
  Total
($)
 

Philipp Lang, M.D. 

    2014     365,000     720,539     583,528 (2)   1,669,067  

President and Chief Executive Officer

                               

Paul Weiner

   
2014
   
231,923

(3)
 
1,145,636
   
3,250

(4)
 
1,380,809
 

Chief Financial Officer

                               

Daniel Steines, M.D., M.S. 

   
2014
   
230,063
   
393,021
   
4,808

(4)
 
627,892
 

Chief Technology Officer

                               

(1)
The amounts reported in the "Option Awards" column reflect the aggregate fair value of share-based compensation awarded during the year computed in accordance with the provisions of FASB Accounting Standard Codification Topic 718. See Note L to our audited financial statements appearing at the end of this prospectus regarding assumptions underlying the valuation of equity awards.

(2)
Such amount consists of $578,810 that Dr. Lang was entitled to receive for 2014 pursuant to a revenue share agreement, which is discussed in "Certain Relationships and Related-Persons Transactions—Revenue share agreement with Dr. Lang", and $4,718 that we contributed to our 401(k) plan in respect of Dr. Lang.

(3)
Mr. Weiner joined the Company on March 24, 2014 and has an annualized base salary of $300,000, which was prorated in 2014.

(4)
Includes the amount we contributed to our 401(k) plan in respect of the applicable named executive officer.

Narrative disclosure to summary compensation table

        We review compensation annually for all employees, including our executives. In setting executive base salaries and bonuses and granting equity incentive awards, we consider compensation for comparable positions in the market, the historical compensation levels of our executives, individual performance as compared to our expectations and objectives, our desire to motivate our employees to achieve short- and long-term results that are in the best interests of our stockholders, and a long-term commitment to our company. We do not target a specific competitive position or a specific mix of compensation among base salary, bonus or long-term incentives.

        Our board of directors has historically determined our executives' compensation. Our compensation committee typically reviews and discusses management's proposed compensation

139


Table of Contents

with our Chief Executive Officer for all executives other than our Chief Executive Officer. Based on those discussions and its discretion, the compensation committee then recommends to our board of directors the compensation for each executive officer, other than our Chief Executive Officer, including equity based awards. The compensation committee has the authority to approve the cash compensation of our executive officers, other than our Chief Executive Officer and President, but has historically made recommendations to our board of directors regarding such compensation. Our board of directors, without members of management present, discusses the compensation committee's recommendations and ultimately approves the compensation of our executive officers, including our Chief Executive Officer. In the fourth quarter of 2013, we engaged Frederic W. Cook & Co. as our independent compensation consultant to review our executive compensation peer group and program design and assess our executives' compensation relative to comparable companies.

        We use base salaries to recognize the experience, skills, knowledge and responsibilities required of all our employees, including our named executive officers. None of our named executive officers is currently party to an employment agreement or other agreement or arrangement that provides for automatic or scheduled increases in base salary. In 2014, we paid base salaries of $365,000 to Dr. Lang, $231,923 to Mr. Weiner and $230,063 to Dr. Steines. Mr. Weiner's employment began on March 24, 2014 and, as a result, the amount shown in the "Salary" column of the Summary Compensation Table reflects payments made to him from the period between March 24, 2014 and December 31, 2014. For 2014, Mr. Weiner's annualized base salary was $300,000.

        We have not historically had a formal performance-based bonus plan. Our board of directors has, in its discretion, awarded cash bonuses and granted equity awards in the form of stock options as bonuses to our executive officers from time to time in the past, and may award cash bonuses and grant equity awards as bonuses to our executive officers in the future. See "Executive Compensation—Stock option and other compensation plans—2015 annual cash bonus and equity grant plan" for a description of our cash and equity bonus plan for 2015.

        In connection with his appointment as Chief Financial Officer, the board of directors originally approved a stock option grant to Mr. Weiner at an exercise price per share above the then-current fair market value per share of common stock. This stock option award was subsequently amended in September 2014, to provide for an exercise price of $8.96 per share, which was the then-current fair market value of our common stock based on our per-share estimated valuation as of such date.

140


Table of Contents

Outstanding equity awards at year end

        The following table sets forth information regarding outstanding stock options held by our named executive officers as of December 31, 2014.

 
  Option awards  
Name
  Number of
securities
underlying
unexercised
options (#)
exercisable
  Number of
securities
underlying
unexercised
options (#)
unexercisable
  Option
exercise
price
($)
  Option
expiration
date
 

Philipp Lang, M.D. 

    13,747     68,753 (1)   10.96     8/3/2024  

President and Chief

    13,747     68,753 (1)   8.96     8/3/2024  

Executive Officer

    7,613         5.50     3/26/2022  

        187,500 (2)   5.50     3/27/2022  

    246,008         5.26     9/26/2021  

    18,231         5.26     9/26/2021  

    125,000         4.32     9/30/2020  

    222,694         1.22 (3)   2/8/2018  

    363,636         1.22 (3)   2/8/2018  

    125,000         1.10     12/22/2016  

Paul Weiner

   
   
253,852

(4)
 
8.96

(5)
 
8/3/2024
 

Chief Financial Officer

                         

Daniel Steines, M.D., M.S. 

   
7,498
   
37,502

(1)
 
10.96
   
8/3/2024
 

Chief Technology Officer

    7,498     37,502 (1)   8.96     8/3/2024  

    4,297         5.50     3/27/2022  

        27,500 (2)   5.50     3/26/2022  

    27,500         5.26     9/26/2021  

    5,531         5.26     9/26/2021  

    97,500         4.32     9/30/2020  

    50,000         0.60     9/11/2016  

(1)
The unvested awards are scheduled to vest in equal monthly installments through April 1, 2018.

(2)
The unvested awards are scheduled to vest beginning on January 1, 2015 in equal monthly installments through January 1, 2016.

(3)
The original exercise price was $1.21 and was later amended to $1.22.

(4)
This option provides for vesting as to 25% of the shares on March 23, 2015, with the remainder vesting in approximately equal monthly installments through March 23, 2018.

(5)
The original exercise price was $10.96 and was later amended to $8.96.

Agreements with Executive Officers

        We entered into an amended and restated employment agreement with Dr. Lang in January 2015. We have entered into an amendment to such agreement to be effective immediately prior to the closing of the offering contemplated by the registration statement of which this prospectus forms a part. In May 2015, we entered into amended and restated employment agreements with Dr. Steines and Messrs. Weiner, Cerveny, Law and Scott. Each of these agreements provides that the executive officer's employment will continue until either we or the executive provides written notice of termination in accordance with the terms of the agreement. In addition, we have

141


Table of Contents

agreements with each of our executive officers that prohibit the executive from disclosing confidential information and from competing with us during the term of his employment and for a specified time thereafter, where permitted under applicable law, and that provides for the assignment of intellectual property rights to us, subject in the case of Dr. Lang to exclusions specified therein. For additional information regarding the assignment of intellectual property rights by Dr. Lang to us, see "Certain Relationships and Related-Persons Transactions—Amended and restated employee confidential information, inventions and non-competition agreement with Dr. Lang."

        Pursuant to their respective employment agreements, each of these executives is entitled to receive an annual base salary as follows: Dr. Lang $395,000; Mr. Weiner: $330,000; Dr. Steines: $290,000; Mr. Cerveny: $290,000; Mr. Law: $260,000; and Mr. Scott: $250,000. Each of these executives is also eligible, in the sole discretion of the compensation committee of our board of directors, to receive an annual bonus. In the case of Dr. Lang, his employment agreement provides that Dr. Lang will be eligible for a cash bonus each year of at least 30% of his annual base salary. However, under our 2015 annual cash bonus and equity grant plan, the target annual cash bonus for 2015, as a percentage of annual base salary, for Dr. Lang is 55%. For additional information regarding annual cash bonuses and annual equity grants, see "Executive Compensation—Stock option and other compensation plan—2015 annual cash bonus and equity grant plan."

Potential Payments Upon Termination or Change in Control Transaction

        Each of our executives will be entitled to severance payments if his employment is terminated under specified circumstances.

        Termination During Change of Control Period.    If we terminate the executive's employment other than for cause, or if the executive terminates his employment with us for good reason, during a change of control period, as described below, we are obligated to:

        A change of control period is the period beginning three months immediately preceding and ending twelve months immediately following a change of control. The terms "termination for cause," "termination for good reason" and "change of control" are defined in the executive's employment agreement. Each of our executives other than Dr. Lang is required to execute a release of claims as a condition precedent to receipt of the severance payments described above.

        Termination Outside of Change of Control Period.    If we terminate the executive's employment other than for cause or if the executive terminates his employment with us for good reason other than during a change of control period, we are obligated to:

142


Table of Contents

        Each of our executives other than Dr. Lang is required to execute a release of claims as a condition precedent to receipt of the severance payments described above.

        Termination Resulting from Death or Disability.    In the event that the executive's employment terminates as a result of his death or disability, as defined in his employment agreement, we are obligated to:

Stock option and other compensation plans

2004 stock option plan

        Our 2004 Stock Option Plan, or 2004 Plan, was adopted by our board of directors and approved by our stockholders in June 2004. Our 2004 Plan was amended in October 2005, August 2007, May 2008 and September 2009. A maximum of 3,792,943 shares of common stock was authorized for issuance under the 2004 Plan.

        The 2004 Plan is administered by our board of directors. The 2004 Plan provided for the grant of incentive stock options and nonqualified stock options. Our employees, directors and consultants, and employees, directors and consultants of our parent or subsidiary corporations, were eligible to receive awards under the 2004 Plan. However, incentive stock options could only be granted to employees. The terms of awards are set forth in the applicable award agreements.

        Awards under the 2004 Plan are subject to appropriate adjustments in the event of a stock split, reverse stock split, stock dividend, or recapitalization, combination or reclassification with respect to our stock.

143


Table of Contents

        Upon a merger of our company with or into another corporation or sale of all or substantially all of our assets, in addition to any rights provided in an applicable award agreement:

        Upon a liquidation or dissolution, we must notify participants at least 30 days prior to such action, and all outstanding awards will terminate immediately prior to the consummation of such liquidation or dissolution, unless previously exercised by the participant.

        With participant consent, our board of directors may modify or amend, or defer the exercise date of, any awards under the 2004 Plan. Subject to applicable stockholder approval requirements, our board of directors may amend or alter the 2004 Plan at any time, except that no amendment or alteration may adversely affect outstanding awards without participant consent except as expressly permitted under the 2004 Plan.

        Effective upon the adoption of our 2011 stock option/stock issuance plan, or 2011 Plan, we ceased making awards under the 2004 Plan. Following the adoption of our 2011 Plan, any shares of common stock subject to awards originally granted under the 2004 Plan that expired, terminated, or were otherwise surrendered, canceled, forfeited or repurchased without having been fully exercised or resulting in any common stock being issued were available for issuance under the 2011 Plan.

        As of May 31, 2015, there were options to purchase an aggregate of 2,279,508 shares of common stock outstanding under the 2004 Plan at a weighted-average exercise price of $2.30 per share. Following the adoption of our 2015 stock incentive plan, or 2015 Plan, any shares of common stock subject to awards originally granted under the 2004 Plan that expire, terminate, or are otherwise surrendered, canceled, forfeited or repurchased without having been fully exercised or resulting in any common stock being issued will be available for issuance under the 2015 Plan, up to a specified number of shares.

2011 stock option plan/stock issuance plan

        Our 2011 Plan was adopted by our board of directors in February 2011 and approved by our stockholders in March 2011. Our 2011 Plan was amended in March 2012 and July 2013. A maximum of 6,630,242 shares of our common stock are authorized for issuance under the 2011 Plan.

        The 2011 Plan is administered by our board of directors and provides for the grant of incentive stock options within the meaning of Section 422 of the Code, non-statutory stock options and stock awards. Our employees, directors and independent contractors, and employees, directors and independent contractors of our parent or subsidiary corporations, are eligible to receive awards under the 2011 Plan. However, incentive stock options may only be granted to our employees. The terms of awards are set forth in the applicable award agreements.

        Awards under the 2011 Plan are subject to appropriate adjustments in the event of a stock split, stock dividend, recapitalization, combination of shares, exchange of shares or other change affecting our outstanding common stock as a class without our receipt of consideration.

        Upon a change of control, as defined in the 2011 Plan:

144


Table of Contents

        Our board of directors has the discretion, exercisable either at the time an award is granted or at any time while an award remains outstanding, to provide that such award will become fully vested upon the occurrence of a change of control or other specified event or the participant's involuntary termination, as defined in the 2011 Plan, within a designated period following a specified event.

        Subject to any applicable stockholder approval requirements pursuant to applicable laws and regulations, our board of directors may amend or terminate the 2011 Plan or any awards under the Plan in any or all respects, except that no amendment or termination may adversely affect the rights and obligations with respect to outstanding awards without participant consent. Our board of directors has the authority, with the consent of the affected participants, to cancel any or all outstanding options under the 2011 Plan and grant in substitution therefor new options covering the same or a different number of shares of our common stock.

        As of May 31, 2015, there were options to purchase an aggregate of 3,342,967 shares of common stock outstanding under the 2011 Plan at a weighted-average exercise price of $7.33 per share.

        As of May 31, 2015, there were 256,013 shares of common stock available for future issuance under the 2011 Plan. Effective as of immediately prior to the closing of this offering, we will grant no further stock options or other awards under the 2011 Plan. Any shares of common stock subject to awards under the 2011 Plan that expire, terminate, or are otherwise surrendered, canceled, forfeited or repurchased without having been fully exercised or resulting in any common stock being issued will be available for issuance under the 2015 stock incentive plan, or 2015 Plan, up to a specified number of shares.

2015 stock incentive plan

        Our board of directors has adopted, and our stockholders have approved, our 2015 Plan, which will become effective immediately prior to the effectiveness of the registration statement of which this prospectus forms a part. The 2015 Plan provides for the grant of incentive stock options, nonstatutory stock options, stock appreciation rights, restricted stock awards, restricted stock units and other stock-based awards. Upon effectiveness of the 2015 Plan, the number of shares of our common stock that will be reserved for issuance under the 2015 Plan will be the sum of: (1) 2,000,000; plus (2) the number of shares (up to 5,878,488 shares) equal to the sum of the number of shares of our common stock then available for issuance under the 2011 Plan and the number of shares of our common stock subject to outstanding awards under the 2011 Plan or under the 2004 Plan that expire, terminate or are otherwise surrendered, canceled, forfeited or

145


Table of Contents

repurchased by us at their original issuance price pursuant to a contractual repurchase right; plus (3) an annual increase, to be added on the first day of each fiscal year, beginning with the fiscal year ending December 31, 2016 and continuing until, and including, the fiscal year ending December 31, 2025, equal to the least of (a) 3,000,000 shares of our common stock, (b) 3% of the number of shares of our common stock outstanding on the first day of such fiscal year and (c) an amount determined by the Board.

        Our employees, officers, directors, consultants and advisors will be eligible to receive awards under the 2015 Plan. Incentive stock options, however, may only be granted to our employees.

        Pursuant to the terms of the 2015 Plan, our board of directors (or a committee delegated by our board of directors) will administer the plan and, subject to any limitations in the plan, will select the recipients of awards and determine:

        If our board of directors delegates authority to an executive officer to grant awards under the 2015 Plan, the executive officer will have the power to make awards to all of our employees, except executive officers, subject to any limitations under the 2015 Plan. Our board of directors will fix the terms of the awards to be granted by such executive officer, including the exercise price of such awards, which may include a formula by which the exercise price will be determined, and the maximum number of shares subject to awards that such executive officer may make.

Effect of certain changes in capitalization

        Upon the occurrence of any stock split, reverse stock split, stock dividend, recapitalization, combination of shares, reclassification of shares, spin-off or other similar change in capitalization or event, or any dividend or distribution to holders of our common stock other than an ordinary cash dividend, our board of directors shall equitably adjust:

146


Table of Contents

Effect of certain corporate transactions

        Upon a merger or other reorganization event, as defined in our 2015 Plan, our board of directors may, on such terms as our board determines, except to the extent specifically provided otherwise in an applicable award agreement or other agreement between the participant and us, take any one or more of the following actions pursuant to the 2015 Plan as to some or all outstanding awards, other than restricted stock:

        Our board of directors does not need to take the same action with respect to all awards, all awards held by a participant or all awards of the same type.

        In the case of certain restricted stock units, no assumption or substitution is permitted, and the restricted stock units will instead be settled in accordance with the terms of the applicable restricted stock unit agreement.

        Upon the occurrence of a reorganization event other than a liquidation or dissolution, the repurchase and other rights with respect to outstanding awards of restricted stock will continue for the benefit of the successor company and will, unless the board of directors may otherwise determine, apply to the cash, securities or other property into which shares of our common stock are converted or exchanged pursuant to the reorganization event. Upon the occurrence of a reorganization event involving a liquidation or dissolution, all restrictions and conditions on each outstanding award of restricted stock will automatically be deemed terminated or satisfied, unless otherwise provided in the agreement evidencing the restricted stock award or any other agreement between the participant and us.

        At any time, our board of directors may, in its sole discretion, provide that any award under the 2015 Plan will become immediately exercisable in full or in part, free of some or all restrictions or conditions, or otherwise realizable in whole or in part as the case may be.

        No award may be granted under the 2015 Plan on or after the ten year anniversary of the date of effectiveness of the registration statement of which this prospectus forms a part. Our board of

147


Table of Contents

directors may amend, suspend or terminate the 2015 Plan at any time, except that stockholder approval may be required to comply with applicable law or stock market requirements.

2015 annual cash bonus and equity grant plan

        In May 2015, our board of directors adopted an annual cash bonus and equity grant plan for 2015. Pursuant to such plan, each of our executive officers is eligible to receive an annual cash bonus, which is based on the achievement of individual and corporate performance objectives, calculated as a percentage of the executive's annual base salary, and which will be determined by the compensation committee of our board of directors, in its sole discretion. The target annual cash bonus for 2015, as a percentage of annual base salary, is as follows: Dr. Lang: 55%; Mr. Weiner: 40%; Dr. Steines: 40%; Mr. Cerveny: 40%; Mr. Law: 35%; and Mr. Scott: 35%. In addition, each of these executives is eligible to receive an annual equity grant, which is based on the achievement of individual and corporate performance objectives, and which will be determined by the compensation committee of our board of directors, in its sole discretion. We believe that equity grants provide our executives with a strong link to our long-term performance, create an ownership culture and help to align the interests of our executives and our stockholders. In addition, we believe that equity grants with a time-based vesting feature promote executive retention because this feature incentivizes our executive officers to remain in our employment during the vesting period. The target annual equity grant for 2015, by value as determined using the Black-Scholes pricing model in the case of stock options, for each of the executive officers is as follows: Dr. Lang: $350,000; Mr. Weiner: $250,000; Dr. Steines: $250,000; Mr. Cerveny: $250,000; Mr. Law: $150,000; and Mr. Scott: $150,000.

401(k) retirement plan

        We maintain a 401(k) retirement plan that is intended to be a tax-qualified defined contribution plan under Section 401(k) of the Code. In general, all of our employees are eligible to participate, beginning on the first day of the month following commencement of their employment. The 401(k) plan includes a salary deferral arrangement pursuant to which participants may elect to reduce their current compensation by up to the statutorily prescribed limit, equal to $18,000, or $24,000 for participants 50 years of age or older, in 2015, and have the amount of the reduction contributed to the 401(k) plan. Currently, we match 50% of employee contributions up to 2% of the employee's salary in total, subject to the statutorily prescribed limit. The match vests over a period of five years.

Rule 10b5-1 sales plans

        Our directors and executive officers may adopt written plans, known as Rule 10b5-1 plans, in which they will contract with a broker to buy or sell shares of our common stock on a periodic basis. Under a Rule 10b5-1 plan, a broker executes trades pursuant to parameters established by the director or officer when entering into the plan, without further direction from the director or officer. It also is possible that the director or officer could amend or terminate the plan when not in possession of material, nonpublic information. In addition, our directors and executive officers may buy or sell additional shares outside of a Rule 10b5-1 plan when they are not in possession of material, nonpublic information.

Limitation of liability and indemnification

        Our restated certificate of incorporation, which will become effective upon the closing of this offering, limits the personal liability of directors for breach of fiduciary duty to the maximum extent permitted by the Delaware General Corporation Law, or DGCL, and provides that no director will have personal liability to us or to our stockholders for monetary damages for breach of fiduciary

148


Table of Contents

duty or other duty as a director. However, these provisions do not eliminate or limit the liability of any of our directors:

        Any amendment to, or repeal of, these provisions will not eliminate or reduce the effect of these provisions in respect of any act, omission or claim that occurred or arose prior to such amendment or repeal. If the DGCL is amended to provide for further limitations on the personal liability of directors of corporations, then the personal liability of our directors will be further limited to the greatest extent permitted by the DGCL.

        In addition, our restated certificate of incorporation, which will become effective upon the closing of this offering, provides that we must indemnify our directors and officers and we must advance expenses, including attorneys' fees, to our directors and officers in connection with legal proceedings, subject to very limited exceptions.

        We maintain a general liability insurance policy that covers certain liabilities of our directors and executive officers arising out of claims based on acts or omissions in their capacities as directors or executive officers. In addition, we intend to enter into indemnification agreements with each of our directors and executive officers. These indemnification agreements may require us, among other things, to indemnify each such director or executive officer for some expenses, including attorneys' fees, judgments, fines and settlement amounts incurred by him or her in any action or proceeding arising out of his or her service as one of our directors or executive officers.

        Certain of our non-employee directors may, through their relationships with their employers, be insured and/or indemnified against certain liabilities incurred in their capacity as members of our board of directors.

        Insofar as indemnification for liabilities arising under the Securities Act of 1933, as amended, or the Securities Act, may be permitted to directors, executive officers or persons controlling us, in the opinion of the SEC, such indemnification is against public policy as expressed in the Securities Act and is therefore unenforceable.

149


Table of Contents

Director compensation

        The following table sets forth information regarding compensation earned by our non-employee directors during 2014.

Name
  Fees earned or
paid in cash ($)
  Option
awards
(1) ($)
  Total ($)  

Kenneth Fallon III

    60,000     104,090     164,090  

Bradley Langdale

    60,000     104,090     164,090  

Colm Lanigan

             

Richard Meelia(2)

             

Michael Milligan

             

Frank Mühlenbeck, Ph.D. 

             

Aditya Puri

             

Laurent Souviron

             

(1)
The amounts reported in the "Option Awards" column reflect the aggregate fair value of share-based compensation awarded during the year computed in accordance with the provisions of FASB Accounting Standard Codification Topic 718. See Note L to our audited financial statements appearing at the end of this prospectus regarding assumptions underlying the valuation of equity awards. As of December 31, 2014, Mr. Fallon and Mr. Langdale each held stock options to purchase an aggregate of 180,000 shares of our common stock, of which 161,248 shares were vested.

(2)
Mr. Meelia joined our board of directors in 2015.

        In addition to the amounts set forth in the table above, we also reimbursed Kenneth Fallon III and Bradley Langdale for reasonable travel and out-of-pocket expenses incurred in connection with attending board of director and committee meetings during 2014.

        For the period beginning February 4, 2015 until the effective date of the registration statement of which this prospectus forms a part, we will pay Messrs. Fallon and Langdale an annual fee of $40,000, which will be prorated for their period of service on our board of directors from February 4, 2015 until the effective date of the registration statement of which this prospectus forms a part. In addition, we will pay Mr. Fallon $50,000 for serving as Chairman of our board of directors, $10,000 for serving as chair of the nominating and corporate governance committee and $5,000 for serving as a member of the Asia strategy committee prorated for the period beginning February 4, 2015 until the effective date of the registration statement of which this prospectus forms a part. We will also pay Mr. Langdale $20,000 for serving as chair of the audit committee, $11,000 for serving as chair of the compensation committee and $5,000 for serving as a member of the Asia strategy committee prorated for the period beginning February 4, 2015 until the effective date of the registration statement of which this prospectus forms a part.

        In connection with his election to our board of directors, we approved a grant to Mr. Meelia under the 2015 Plan, effective as of and contingent upon the effectiveness of the registration statement of which this prospectus forms a part, of a number of shares of restricted stock equal to $220,000 divided by the per share price at which shares of our common stock are sold by the underwriters to the public in this offering. The shares will vest with respect to 100% of the shares on the second anniversary of the grant date, and such vesting will accelerate in full upon a change of control.

150


Table of Contents

        Upon the effective date of the registration statement of which this prospectus forms a part, our non-employee directors will be compensated for their services on our board of directors as follows:

        Unless otherwise provided at the time of grant, subject to the non-employee director's continued service as a director, the initial grant of our restricted common stock referred to in the first bullet above will vest with respect to 100% of the shares upon the two year anniversary of the grant date, and each annual grant of our restricted common stock referred to in the second bullet point above will vest with respect to 100% of the shares upon the earlier of the first anniversary of the grant date or the date of the first annual meeting of stockholders after the grant date. In the case of each of such initial grants and such annual grants, in the event of a change in control, the vesting schedule of the shares subject to each grant will accelerate in full.

        Each annual cash fee will be payable in arrears in four equal quarterly installments on the last day of each quarter. The amount of each payment will be prorated for any portion of a quarter that a director is not serving on our board or committee, as applicable. In addition, no fee will be payable in respect of any period prior to the effective date of the registration statement of which this prospectus is a part, and the first payment after the effective date will be prorated therefor.

        Each non-employee director will also be entitled to reimbursement for reasonable travel and other expenses incurred in connection with attending meetings of the board of directors and any committee on which he or she serves.

151


Table of Contents


CERTAIN RELATIONSHIPS AND RELATED-PERSONS TRANSACTIONS

        In addition to the compensation agreements with directors and executive officers described under "Executive Compensation," the following is a description of transactions since January 1, 2012 to which we have been a party, and in which any of our directors, executive officers or beneficial owners of more than 5% of our voting securities, or affiliates or immediate family members of any of our directors, executive officers or beneficial owners of more than 5% of our voting securities, had or will have a direct or indirect material interest. We believe the terms obtained or consideration that we paid or received, as applicable, in connection with the transactions described below were comparable to terms available or the amounts that would be paid or received, as applicable, from unrelated third parties.

Series E-1 preferred stock and series E-2 preferred stock financings

        From June 2011 through August 2014, we issued and sold an aggregate of 14,633,509 shares of our Series E-1 preferred stock, at a price per share of $8.00, for an aggregate purchase price of approximately $115.8 million. The sale of Series E-1 preferred stock was structured in multiple tranches and with multiple closing dates.

        From October 2011 through July 2013, we issued and sold an aggregate of 9,586,237 shares of our Series E-2 preferred stock, at a price per share of $8.00 for an aggregate purchase price of approximately $76.7 million. The sale of Series E-2 preferred stock was structured in multiple tranches and with multiple closing dates.

        In connection with the issuance and sale of our Series E-1 preferred stock and Series E-2 preferred stock, we entered into a promissory note conversion and warrant amendment agreement with Aeris Capital Archer L.P. and SGR Sagittarius Holding AG, collectively aeris CAPITAL, on December 12, 2012 that provided for the termination of a convertible promissory note in the original aggregate principal amount of $10.0 million and approximately $2.5 million in accrued interest in exchange for 672,952 shares of Series E-2 preferred stock, 687,134 shares of our Series D preferred stock and 261,765 shares of our common stock. In exchange for the shares, Aeris Capital Archer L.P. entered into stock purchase agreements for such shares. The promissory note conversion and warrant amendment agreement provided that the expiration date of certain warrants to purchase an aggregate of 666,665 shares of our Series D preferred stock at an exercise price per share of $6.00 held by aeris CAPITAL, which we refer to as the aeris CAPITAL warrants, was extended until the earlier to occur of (1) a sale or change in control of our company or (2) December 31, 2016. Prior to such extension, the aeris CAPITAL warrants would have terminated upon the earlier to occur of (1) a sale or change in control of our company, (2) an initial underwritten public offering of our common stock pursuant to a registration statement under the Securities Act or (3) various times between February 2013 and August 2015.

152


Table of Contents

        The following table sets forth the number of shares of our Series E-1 preferred stock and Series E-2 preferred stock purchased by our directors, executive officers and 5% stockholders and their affiliates pursuant to these transactions.

Purchaser(1)
  Shares of
Series E-1
preferred
stock
  Total purchase
price of Series E-1
preferred stock ($)
  Shares of
Series E-2
preferred
stock
  Total purchase
price of Series E-2
preferred stock ($)
  Total Series E-1
preferred stock
and Series E-2
preferred stock
purchase price ($)

Procific(2)

    3,125,000     25,000,000     3,125,000   25,000,000   50,000,000

Tasik Temenggor Investments (Cayman Islands) Limited(3)

    1,312,500     10,500,000     2,437,500 (7) 19,500,000   30,000,000

Stanhope Investments

    1,562,500     12,500,000     1,562,500   12,500,000   25,000,000

Aeris Capital Archer L.P.(4)

    375,000     3,000,000     672,952   Note Conversion(8)   3,000,000 and Note Conversion(8)

AGC Equity Partners Special Opportunities Fund I L.P.(5)

    525,000     4,200,000     975,000   7,800,000   12,000,000

NewtrAx LLC(6)

    656,250     5,250,000     1,218,750   9,750,000   15,000,000

(1)
See "Principal Stockholders" for more information about shares held by these entities.

(2)
Colm Lanigan, a member of our board of directors, is affiliated with Procific.

(3)
Aditya Puri, a member of our board of directors, is affiliated with Tasik Temenggor Investments (Cayman Islands) Limited.

(4)
Frank Mühlenbeck, a member of our board of directors, is affiliated with aeris CAPITAL.

(5)
Laurent Souviron, a member of our board of directors, is affiliated with AGC Equity Partners Special Opportunities Fund I L.P.

(6)
Michael Milligan, a member of our board of directors, is affiliated with NewtrAx LLC.

(7)
Such shares include the 381,875 shares of Series E-2 preferred stock that were issued in exchange for the cancellation of 381,875 shares of Series E-1 preferred stock pursuant to the terms of an amended and restated letter agreement discussed below.

(8)
Such payment was made through the cancellation of certain convertible notes held by Aeris Capital Archer L.P. in the original aggregate principal amount of $10.0 million and approximately $2.5 million in accrued interest, of which approximately $6.0 million was allocated as payment for the shares of Series E-2 preferred stock.

        In connection with the issuance and sale of our Series E-1 and E-2 preferred stock, we entered into a letter agreement with Stanhope Investments in July 2013 that provided Stanhope Investments with the right to invest up to $25,000,000, but no less than $10,000,000, in the first firm commitment underwritten public offering pursuant to an effective registration statement filed by us under the Securities Act covering the offer and sale of our common stock to the public with aggregate proceeds to us of not less than $50,000,000, before deduction of underwriting commissions and expenses, and with a per share price of not less than $10.00 per share, as adjusted for stock splits, combinations or similar transactions. The letter agreement provided that such right would continue until such time as Stanhope Investments no longer held at least 600,000 shares of our Series E-1 preferred stock and/or Series E-2 preferred stock or a change in control of our Company. Stanhope Investments has elected not to participate in the offering contemplated by the registration statement of which this prospectus forms a part. Upon such election not to participate, the letter agreement terminated.

153


Table of Contents

Asia strategy committee with Tasik

        In connection with the issuance and sale of our Series E-1 preferred stock and Series E-2 preferred stock, we entered into an amended and restated letter agreement with Tasik Temenggor Investments (Cayman Islands) Limited, or Tasik, dated July 16, 2013, that provides that $5.0 million of the proceeds received by us from Tasik for the sale of our Series E-1 preferred stock and Series E-2 preferred stock could only be used in connection with the marketing and sale of our products in Asia and that a committee of our board of directors, which we refer to as our Asia strategy committee, is required to be maintained for the purposes of directing and overseeing the investment of such proceeds. This letter agreement will terminate prior to or effective upon the closing of this offering contemplated by the registration statement of which this prospectus forms a part. Upon the termination of this letter agreement, we will not be required to invest such proceeds in the manner that had been required by the letter agreement and we will not be required to maintain such an Asia strategy committee. While we will not have an obligation to maintain such a committee, our board of directors has determined to continue to have such a committee for a period of two years following the closing of the offering contemplated by the registration statement of which this prospectus forms a part. Upon the effectiveness of this registration statement of which this prospectus forms a part, the members of the Asia strategy committee will be Philipp Lang and Aditya Puri and the committee's responsibility will be to oversee our business development activities in Asia.

        This letter agreement also provided that we issue to Tasik, at the time of the execution of the letter agreement, 381,875 shares of Series E-2 preferred stock in exchange for (1) 381,875 shares of Series E-1 preferred stock then held by Tasik and (2) the termination of an obligation owed by us to Tasik pursuant to the terms of a prior letter agreement between us and Tasik, which transaction we refer to as the Share Exchange. The obligation under the prior letter agreement provided that, in the event any payments were made to, received by or otherwise payable to the holders of our Series E-2 preferred stock with respect to the shares of our Series E-2 preferred stock held by such holders, we would be obligated to pay to Tasik an amount equal to 381,875 (as adjusted for stock splits, combinations, recapitalizations and the like with respect to the Series E-2 preferred stock), multiplied by the difference between (x) the amount paid to or received by the holders of Series E-2 preferred stock for each share of Series E-2 preferred stock held by them and (y) the amount paid to the holders of Series E-1 preferred stock for each share of Series E-1 preferred stock held by them. This letter agreement also provided that if any such obligation to pay to Tasik such an amount existed at the time of the Share Exchange, we would continue to be obligated to make such accrued but unpaid payment to Tasik. At the time of the Share Exchange, however, no such payment obligation existed. The Share Exchange was consummated in July 2013.

        As of March 31, 2015, $3.5 million of the proceeds referred to above was classified as restricted cash.

Sponsor designee recommendation agreement with Procific

        In May 2015, we entered into a Sponsor Designee Recommendation Agreement with Procific, or the Procific Agreement, which will become effective upon the closing of this offering. See "Management—Board composition" for the material terms of the Procific Agreement.

Registration rights agreement with holders of our preferred stock

        In June 2015, we entered into an amended and restated information and registration rights agreement, which we refer to as the Registration Rights Agreement, with holders of our preferred stock, including some of our 5% stockholders and their affiliates and entities affiliated with our directors. The Registration Rights Agreement provides these holders the right, subject to certain

154


Table of Contents

limitations, to demand that we file a registration statement or request that their shares be covered by a registration statement that we are otherwise filing. See "Description of Capital Stock—Registration rights" for additional information regarding these registrations rights.

Revenue share agreement with Dr. Lang

        In September 2011, we entered into an amended and restated revenue share agreement with Philipp Lang, M.D., our Chief Executive Officer, which amended and restated a similar agreement entered into in 2008 when Dr. Lang stepped down as chair of our scientific advisory board and became our Chief Executive Officer. This agreement provides that we will pay Dr. Lang on an annual basis 1.33% of our net revenues up to and including $125 million and 1.1667% of our net revenues in excess of $125 million with respect to our iTotal CR, iTotal PS and iTotal Hip products, as well as other hip and shoulder replacement products we may develop in the future and patient-specific, revision-implant instrumentation we may develop in the future. This agreement also provides that we will pay Dr. Lang on an annual basis 1.0% of our net revenues up to and including $125 million and 0.875% of our net revenues in excess of $125 million with respect to our iUni and iDuo products, as well as certain other knee replacement or resurfacing products, modifications to any of our knee, hip or shoulder products made by us with Dr. Lang's assistance in the future and patient-specific, non-revision-implant instrumentation we may develop in the future. For years beginning on or after January 1, 2016, our obligation to pay Dr. Lang applies only to those of our products that are covered by a valid claim of a patent assigned to us in the country in which we sell those products and on which Dr. Lang is a named inventor. Our payment obligations expire on a product-by-product basis on the last to expire of patents owned by us on which Dr. Lang is a named inventor that claim the applicable product. These payment obligations survive any termination of Dr. Lang's employment with us. Under this agreement, we incurred obligations to pay Dr. Lang $243,315 for the year ended December 31, 2012, $415,402 for the year ended December 31, 2013, $578,810 for the year ended December 31, 2014 and $181,133 for the three months ended March 31, 2015.

Vertegen license

        In April 2007, we entered into a license agreement with Vertegen, Inc., or Vertegen, which we amended in May 2015. Vertegen is an entity that is wholly-owned by Dr. Lang, our Chief Executive Officer. We call this agreement the Vertegen agreement. Under this agreement, Vertegen granted us an exclusive, worldwide license under specified Vertegen patent rights and related technology to make, use and sell products and services in the fields of diagnosis and treatment of articular disorders and disorders of the human spine. We may sublicense the rights licensed to us by Vertegen. We are required to use commercially reasonable efforts, at our sole expense, to prosecute the patent applications licensed to us by Vertegen.

        In connection with entering into the license agreement with Vertegen, we paid Vertegen an initial license fee of $10,000 and we issued Vertegen a warrant to purchase 100,000 shares of our common stock at an exercise price of $1.10 per share, which has expired unexercised. Pursuant to the license agreement as amended, we will be required to pay Vertegen a 6% royalty on each of net sales of products covered by the patents licensed to us by Vertegen, the subject matter of which is directed primarily to spinal implants, and any proceeds from our enforcing the patent rights licensed to us by Vertegen. Such 6% royalty rate will be reduced to 3% in the United States during the five-year period following the expiration of the last-to-expire applicable patent in the United States and in the rest of the world during the five-year period following the expiration of the last-to-expire patent anywhere in the world. To date, we have not sold any products subject to this agreement and have paid no royalties under this agreement. We have paid approximately $130,000

155


Table of Contents

in expenses to date in connection with the preparation of the patent applications licensed to us by Vertegen.

        The Vertegen agreement may be terminated by us at any time upon advance notice to Vertegen. In addition, Vertegen may terminate the Vertegen agreement in its entirety if we are in material breach of the agreement, and we fail to cure such breach during a specified period.

Amended and restated employee confidential information, inventions and non-competition agreement with Dr. Lang

        We have entered into confidential information, inventions and non-competition agreements with each of our executive officers. Our agreement with Dr. Lang provides that certain intellectual property developed by Dr. Lang is not assigned to us, including inventions associated with work done in conjunction with or on behalf of other entities prior to Dr. Lang's employment with us, such as Vertegen and Brigham and Women's Hospital. In addition, Dr. Lang is not required to assign various inventions that do not relate to our current business, including inventions related to anti-angiogenesis, spinal implants and vascular stents.

Indemnification of directors and officers

        Our restated certificate of incorporation that will be effective as of the closing of this offering provides that we will indemnify our directors and officers to the fullest extent permitted by Delaware law. Our restated certificate of incorporation will also provide our board of directors with discretion to indemnify our employees and agents when determined appropriate by the board of directors. In addition, we expect to enter into indemnification agreements with each of our directors and executive officers that may be broader in scope than the specific indemnification provisions contained in the Delaware General Corporation Law. See the "Executive compensation—Limitation of liability and indemnification" section of this prospectus for a further discussion of these arrangements.

Corporate opportunities

        Pursuant to our restated certificate of incorporation that will be effective as of the closing of this offering (1) to the fullest extent permitted by law, we, on behalf of ourselves, our subsidiaries and our and their respective stockholders, renounce any interest or expectancy in, or in being offered an opportunity to participate in, any business opportunity that may be presented to aeris CAPITAL Archer L.P., SGR Sagittarius Holding AG, AGC Equity Partners Special Opportunities Fund I L.P., NewtrAx LLC, Procific and Tasik Temenggor (Cayman Islands) Limited or their partners, principals, directors, officers, members, managers, employees and/or other representatives and (2) no such person or entity has any duty to communicate or offer such business opportunity to us or any of our subsidiaries or shall be liable to us or any of our subsidiaries or any of our or its stockholders for breach of any duty, as a director or officer or otherwise, by reason of the fact that such person or entity pursues or acquires such business opportunity, directs such business opportunity to another person or fails to present such business opportunity, or information regarding such business opportunity, to us or our subsidiaries, unless, in the case of any such person who is a director or officer of ours, such business opportunity is expressly offered to such director or officer in writing solely in his or her capacity as our director or officer.

Policies and procedures for related person transactions

        In May 2015 our board of directors adopted written policies and procedures for the review of any transaction, arrangement or relationship in which we are a participant, the amount involved exceeds $120,000 and one of our executive officers, directors, director nominees or 5%

156


Table of Contents

stockholders (or their immediate family members), each of whom we refer to as a "related person," has a direct or indirect material interest.

        If a related person proposes to enter into such a transaction, arrangement or relationship, which we refer to as a "related-person transaction," the related person must report the proposed related-person transaction to our Chief Financial Officer or General Counsel. The policy calls for the proposed related-person transaction to be reviewed and, if deemed appropriate, approved by the audit committee of our board of directors. Whenever practicable, the reporting, review and approval will occur prior to entry into the transaction. If advance review and approval is not practicable, the committee will review and, in its discretion, may ratify the related-person transaction. The policy also permits the chairman of the audit committee to review and, if deemed appropriate, approve proposed related-person transactions that arise between committee meetings, subject to ratification by the committee at its next meeting. Any related-person transactions that are ongoing in nature will be reviewed annually.

        A related-person transaction reviewed under the policy will be considered approved or ratified if it is authorized by the committee after full disclosure of the related person's interest in the transaction. As appropriate for the circumstances, the committee will review and consider:

        The audit committee may approve or ratify the transaction only if the audit committee determines that, under all of the circumstances, the transaction is not inconsistent with our best interests. The audit committee may impose any conditions on the related-person transaction that it deems appropriate.

        In addition to the transactions that are excluded by the instructions to the SEC's related-person transaction disclosure rule, the board of directors has determined that the following transactions do not create a material direct or indirect interest on behalf of related persons and, therefore, are not related-person transactions for purposes of this policy:

        The policy provides that transactions involving compensation of executive officers shall be reviewed and approved by the compensation committee in the manner specified in its charter.

157


Table of Contents


PRINCIPAL STOCKHOLDERS

        The following table sets forth information regarding the beneficial ownership of our common stock as of May 31, 2015 by:

        Beneficial ownership is determined in accordance with the rules and regulations of the SEC. These rules generally attribute beneficial ownership of securities to persons who possess sole or shared voting power or investment power with respect to those securities and include shares of common stock issuable upon the exercise of stock options and warrants that are immediately exercisable or exercisable within 60 days after May 31, 2015. Except as otherwise indicated, all of the shares reflected in the table are shares of common stock and all persons listed below have sole voting and investment power with respect to the shares beneficially owned by them, subject to community property laws, where applicable. The information is not necessarily indicative of beneficial ownership for any other purpose.

        The number of shares beneficially owned in the following table assumes the automatic conversion of all outstanding shares of our preferred stock into shares of common stock upon closing of this offering. The percentage ownership calculations for beneficial ownership prior to this offering are based on 29,843,235 shares outstanding as of May 31, 2015, assuming the automatic conversion of all outstanding shares of our preferred stock into shares of common stock upon closing of this offering. Percentage ownership calculations for beneficial ownership after this offering also include the shares we are offering hereby. Except as otherwise indicated in the table below, addresses of named beneficial owners are in care of ConforMIS, Inc., 28 Crosby Drive, Bedford, Massachusetts 01730.

        In computing the number of shares of common stock beneficially owned by a person and the percentage ownership of that person, we deemed outstanding shares of common stock subject to options or warrants held by that person that are currently exercisable or exercisable within 60 days after May 31, 2015. We did not deem these shares outstanding, however, for the purpose of computing the percentage ownership of any other person.

158


Table of Contents

Name of beneficial owner
  Number of
shares
beneficially
owned
  Percentage of
shares
beneficially
owned before
offering
  Percentage of
shares
beneficially
owned after
offering
 

5% Stockholders

                   

Procific(1)

    3,125,000     10.47 %   8.00 %

Veron International Limited(2)

    2,942,177     9.86 %   7.53 %

SGR Sagittarius Holding AG and Aeris Capital Archer L.P.(3)

    3,874,913     12.77 %   9.79 %

Tasik Temenggor Investments (Cayman Islands) Limited(4)

    1,875,000     6.28 %   4.80 %

Stanhope Investments(5)

    1,562,500     5.24 %   4.00 %

Executive Officers and Directors

                   

Philipp Lang, M.D.(6)

    2,261,552     7.27 %   5.61 %

Paul Weiner(7)

    84,613     * %   * %

Daniel Steines, M.D., M.S.(8)

    469,956     1.56 %   1.20 %

Kenneth Fallon III(9)

    174,787     * %   * %

Bradley Langdale(10)

    174,787     * %   * %

Colm Lanigan

             

Richard Meelia(11)

             

Michael Milligan

             

Frank Mühlenbeck, Ph.D(12)

    3,874,913     12.77 %   9.79 %

Aditya Puri, M.S. 

             

Laurent Souviron

             

All current executive officers and directors as a group (14 persons)

    7,455,591     22.82 %   17.79 %

*
Represents beneficial ownership of less than 1% of our outstanding stock.

(1)
Consists of (a) 1,562,500 shares of common stock issuable upon conversion of Series E-1 preferred stock and (b) 1,562,500 shares of common stock issuable upon conversion of Series E-2 preferred stock. Procific, a Cayman Island exempted company with limited liability, is a wholly-owned subsidiary of the Abu Dhabi Investment Authority (ADIA), a public institution established by the Government of the Emirate of Abu Dhabi. ADIA's Investment Committee, which is chaired by the Managing Director, is responsible for managing and overseeing investment-related matters for ADIA, including authority over the exercise of investment and voting powers with respect to investments. The Investment Committee consists of: H.H. Sheikh Hamed Bin Zayed Al Nahyan (Managing Director), H.E. Khalil Mohammed Sharif Foulathi, H.E. Hareb Masood Hamad Rashed Aldarmaki, H.H. Sheikh Mohammed Bin Khalifa bin Zayed Al Nahhyan, H.E. Hamad Mohammed Al Hurr Al Suwaidi, Mohamed Ahmed M. Bandouq Alqamzi, Obaid Murad Hassan Abdulla Alsuwaidi, Nasser Shotait Salem Rashed Al Ketbi, Khalifa Matar Khalifa Qaroona Almheiri, Majed Salem Khalifa Rashed Alromaithi, Hamad Shahwan Surour Shahwan Aldhaheri, Juma Klamis Mugheer Jaber Alkhyeli and Salem Mohamed Hela Rashed Almazroueid. The registered address for Procific is 122 Mary Street, PO Box 709, Grand Cayman, Cayman Islands, KY1-1107.

(2)
Consists of (a) 716,045 shares of common stock, (b) 1,066,074 shares of common stock issuable upon conversion of Series B preferred stock, (c) 899,642 shares of common stock issuable upon conversion of Series C preferred stock and (d) 260,416 shares of common stock issuable upon conversion of Series D preferred stock. Voting and investment power over the shares held by Veron International Limited, or Veron, is controlled by Veron's board of directors consisting of Joseph Leung Wing Kong, Sunny Yeung Kwong and Milestone Management Ltd., which is wholly-owned by the estate of Kung Nina. Each of Joseph Leung Wing Kong and Sunny Yeung Kwong, as directors of Veron, and Jong Yat Kit, Chan Wai Tong Christopher and Wong Tak Wai, as Joint and Several Administrators of the Estate of Kung Nina, may be deemed to have voting and investment power with respect to the shares held by Veron. The principal business address for Veron International Limited is 35-38 Floor, Nina Tower 8 Yeung UK Road Tsuen Wan, N.T., Hong Kong.

(3)
Consists of (a) 261,765 shares of common stock held of record by aeris CAPITAL Archer L.P., or aeris, (b) 557,617 shares of common stock issuable upon conversion of Series B preferred stock held of record by SGR Sagittarius Holding AG, (c) 178,571 shares of common stock issuable upon conversion of

159


Table of Contents

(4)
Consists of (a) 656,250 shares of common stock issuable upon conversion of Series E-1 preferred stock and (b) 1,218,750 shares of common stock issuable upon conversion of Series E-2 preferred stock. Fares Zahir is authorized to make decisions on investment-related matters of Tasik Temenggor Investments (Cayman Islands) Limited, or Tasik, and may be deemed to have voting and dispositive power with respect to the shares held by Tasik. The principal business address for Tasik Temenggor Investments (Cayman Islands) Limited is TMF (Cayman) Ltd., 1st Floor, Windward Regatta Office Park, P.O. Box 10338, Grand Cayman, KYI-1003, Cayman Islands.

(5)
Consists of (a) 781,250 shares of common stock issuable upon conversion of Series E-1 preferred stock and (b) 781,250 shares of common stock issuable upon conversion of Series E-2 preferred stock. Stanhope Investments is a wholly owned subsidiary of Abu Dhabi Investment Council, which is a public institution established by the Government of the Emirate of Abu Dhabi in the United Arab Emirates. Voting and investment power over the shares held by Stanhope Investments is exercised by the Board of Directors of Stanhope Investments and such Board of Directors is comprised of Khaled Mohamed Balama, Khalifa Sultan Al Suwaidi, Salem Mohamed Al Ameri, Mohamed Ali Al Dhaheri, Omar Liaqat and Yousef Abdul Aziz Ahmed Abdulla Al Harmoodi, each of whom may be deemed to share voting and investment power over the shares held by Stanhope Investments. The principal business address for Stanhope Investments is 190 Elgin Avenue, Grand Cayman, KY1-9005, Cayman Islands.

(6)
Consists of (a) 64,670 shares of common stock held by Dr. Lang, (b) 1,253,480 shares of common stock issuable to Dr. Lang upon the exercise of options exercisable within 60 days after May 31, 2015, (c) 930,904 shares of common stock held by the NP Irrevocable Trust udt dated 12/28/12 and (d) 12,498 shares of common stock held by Dr. Lang's children. Dr. Lang holds voting and investment power over the shares held by the NP Irrevocable Trust udt dated 12/28/12 and by his children.

(7)
Consists of 84,613 shares of common stock issuable upon the exercise of options exercisable within 60 days after May 31, 2015.

(8)
Consists of (a) 113,259 shares of common stock held by Dr. Steines, (b) 226,697 shares of common stock issuable to Dr. Steines upon the exercise of options exercisable within 60 days after May 31, 2015 and (c) 130,000 shares of common stock held by the Steines 2011 Family Trust. Dr. Steines holds voting and investment power over the shares held by the Steines 2011 Family Trust.

160


Table of Contents

(9)
Consists of 174,787 shares of common stock issuable upon the exercise of options exercisable within 60 days after May 31, 2015.

(10)
Consists of 174,787 shares of common stock issuable upon the exercise of options exercisable within 60 days after May 31, 2015.

(11)
In connection with his election to our board of directors, we approved a grant to Mr. Meelia under our 2015 stock incentive plan, effective as of and contingent upon the effectiveness of the registration statement of which this prospectus forms a part, of a number of shares of restricted stock equal to $220,000 divided by the per share price at which shares of our common stock are sold by the underwriters to the public in this offering.

(12)
Consists of the shares described in note (3) above. Dr. Mühlenbeck, a member of our board of directors, is a managing director of an entity that acts as an investment advisor to aeris CAPITAL Archer Ltd. and to SGR Sagittarius Holding AG. Dr. Mühlenbeck disclaims beneficial ownership of the shares held by each of aeris CAPITAL Archer L.P. and SGR Sagittarius Holding AG, except to the extent of his pecuniary interest therein. Dr. Mühlenbeck's business address is Churerstrasse 70, 8808 Pfaeffikon, Switzerland.

161


Table of Contents


DESCRIPTION OF CAPITAL STOCK

General

        Following the closing of this offering, our authorized capital stock will consist of 200,000,000 shares of common stock, par value $0.00001 per share, and 5,000,000 shares of preferred stock, par value $0.00001 per share, all of which preferred stock will be undesignated. The following description of our capital stock and provisions of our restated certificate of incorporation and amended and restated bylaws are summaries and are qualified by reference to the restated certificate of incorporation and the bylaws that will be in effect upon the closing of this offering. We have filed copies of these documents with the SEC as exhibits to our registration statement of which this prospectus forms a part. The descriptions of the common stock and preferred stock reflect changes to our capital structure that will occur upon the closing of this offering.

        As of May 31, 2015, we had issued and outstanding:

        As of May 31, 2015, we had outstanding:

        Upon the closing of this offering:

162


Table of Contents

Common stock

        Holders of our common stock are entitled to one vote for each share held on all matters submitted to a vote of stockholders and do not have cumulative voting rights. An election of directors by our stockholders shall be determined by a plurality of the votes cast by the stockholders entitled to vote on the election. Other matters shall be decided by the affirmative vote of our stockholders having a majority in voting power of the votes cast by the stockholders present or represented and voting on such matter, except as otherwise disclosed below. Holders of common stock are entitled to receive proportionately any dividends as may be declared by our board of directors, subject to any preferential dividend rights of outstanding preferred stock.

        In the event of our liquidation or dissolution, the holders of common stock are entitled to receive proportionately all assets available for distribution to stockholders after the payment of all debts and other liabilities and subject to the prior rights of any outstanding preferred stock. Holders of common stock have no preemptive, subscription, redemption or conversion rights. Our common stock is not subject to sinking fund provisions. The rights, preferences and privileges of holders of common stock are subject to and may be adversely affected by the rights of the holders of shares of any series of preferred stock that we may designate and issue in the future.

Preferred stock

        Under the terms of our restated certificate of incorporation that will become effective upon the closing of this offering, our board of directors is authorized to issue shares of preferred stock in one or more series without stockholder approval. Our board of directors has the discretion to determine the rights, preferences, privileges and restrictions, including voting rights, dividend rights, conversion rights, redemption privileges and liquidation preferences, of each series of preferred stock.

163


Table of Contents

        The purpose of authorizing our board of directors to issue preferred stock and determine its rights and preferences is to eliminate delays associated with a stockholder vote on specific issuances. The issuance of preferred stock, while providing flexibility in connection with possible acquisitions, future financings and other corporate purposes, could have the effect of making it more difficult for a third party to acquire, or could discourage a third party from seeking to acquire, a majority of our outstanding voting stock. Upon the closing of this offering, there will be no shares of preferred stock outstanding, and we have no present plans to issue any shares of preferred stock.

Stock options

        As of May 31, 2015, options to purchase 5,622,475 shares of our common stock at a weighted average exercise price of $5.29 per share were outstanding, of which options to purchase 4,149,825 shares of our common stock were exercisable, at a weighted average exercise price of $4.10 per share.

Warrants

        As of May 31, 2015, we had outstanding:

        Upon the closing of this offering and after giving effect to the automatic conversion of our preferred stock into common stock:

164


Table of Contents

        All of the warrants that will remain outstanding after the closing of this offering can be exercised on a cashless basis and require adjustment to the number of shares for which each is exercisable and the exercise price of each in the event of any reclassifications, stock dividends, stock splits or other changes in our corporate structure.

        The series C warrant expires on July 19, 2017 or upon a sale of our company. The Series C warrant provides for a cashless exercise and the cashless exercise is automatic in the event the Series C warrant is not exercised as of immediately prior to the expiration date and the price per share of our securities underlying the warrant exceeds the then applicable exercise price per share of such securities. The Series C warrant also provides that we may have to purchase the shares of our capital stock underlying the Series C warrant, at a price per share equal to the then current fair market value of such shares, if the holder exercises its put option in the event the holder is not allowed to become a party to the Registration Rights Agreement or receive the registration and other rights provided for therein.

Registration rights

        Pursuant to the terms of the Registration Rights Agreement, subject to the lock-up agreements described under "Shares Eligible for Future Sale—Lock-up agreements," upon the closing of the offering contemplated by the registration statement of which this prospectus forms a part, holders of an aggregate of 25,497,480 shares of our common stock that will be issued upon conversion of our preferred stock, which we refer to as registrable shares, will have the right to require us to register these registrable shares under the Securities Act, and to participate in future registrations of securities by us, under the circumstances described below. In addition, subject to the lock-up agreements described under "Shares Eligible for Future Sale—Lock-up agreements," upon the closing of the offering contemplated by the registration statement of which this prospectus forms a part, the holders of warrants to purchase an aggregate of 684,334 shares of our common stock, assuming conversion of our preferred stock into common stock upon the closing of the offering, the assumed warrant exercises and the Series D warrant exchange will have the right to have the shares of common stock issuable upon exercise of such warrants be treated as registrable shares and to require us to register these registrable shares under the Securities Act, and to participate in future registrations of securities by us. After registration pursuant to these rights, these shares will become freely tradable without restriction under the Securities Act. If not otherwise exercised, the rights described below will expire on the earlier of (1) the date that is four years after the closing of the offering contemplated by the registration statement of which this prospectus forms a part, plus any period of time for which we have invoked our right under the agreement to defer the filing of a registration statement after a demand to file a registration statement has been made by the holders of registrable shares, plus any period of time, after the effective date of the resale registration statement described below, during which the effectiveness of such resale registration statement has been suspended, withdrawn or delayed, (2) the date on which such holder of such rights has resold all registrable shares and (3) such time as such holder, together with its affiliates, holds less than 5% of our capital stock and Rule 144 or another similar exemption under the Securities Act is available for the sale of all of such holder's registrable shares without limitation and without registration under the Securities Act.

165


Table of Contents

Demand registration rights

        Beginning six months after the closing of the offering contemplated by the registration statement of which this prospectus forms a part, subject to specified limitations set forth in the Registration Rights Agreement, the holders of at least 25% of the then outstanding registrable shares may at any time demand in writing that we register all or a portion of the registrable shares under the Securities Act on a Form other than Form S-3 for an offering of at least 20% of the then outstanding registrable shares or a lesser percent of the then outstanding registrable shares provided that it is reasonably anticipated the aggregate offering price, net of selling expenses, would exceed $20 million. We are not obligated to file a registration statement pursuant to this provision on more than two occasions.

        In addition, after such time as we are eligible to use Form S-3, subject to specified limitations set forth in the Registration Rights Agreement, the holders of at least 25% of the then outstanding registrable shares may at any time demand in writing that we register all or a portion of the registrable shares under the Securities Act on Form S-3 for an offering of at least 25% of the then outstanding registrable shares having an anticipated aggregate offering price to the public, net of selling expenses, of at least $5 million, which we refer to as a Resale Registration Statement. We are not obligated to effect a registration pursuant to a Resale Registration Statement on more than one occasion.

Incidental registration rights

        If, at any time after the closing of the offering contemplated by the registration statement of which this prospectus forms a part, we propose to file a registration statement to register any of our common stock under the Securities Act in connection with a public offering of such common stock, other than pursuant to certain specified registrations, the holders of our registrable shares are entitled to notice of registration and, subject to specified exceptions, including market conditions, we will be required, upon the holder's request, to register their then held registrable shares.

        In the event that any registration in which the holders of registrable shares participate pursuant to our Registration Rights Agreement is an underwritten public offering, we agree to enter into an underwriting agreement for such offering.

Expenses and Indemnification

        Pursuant to the Registration Rights Agreement, we are required to pay all expenses incurred by us in complying with our obligations to register registrable shares pursuant to the Registration Rights Agreement, including, without limitation, registration, qualification and filing fees, printing expenses, fees and disbursements of one special counsel to represent the selling stockholders, up to $50,000 per registration, Blue Sky fees and expenses and the expense of any special audits incident to or required by any such registration, but excluding underwriting discounts and selling commissions. We are not required to pay registration expenses if a demand registration request under the Registration Rights Agreement is withdrawn at the request of holders of a majority of the registrable shares to be registered, unless the withdrawal is due to discovery of a materially adverse change in our business or such holders agree to forfeit one of their demand rights.

        The Registration Rights Agreement contains customary cross-indemnification provisions, pursuant to which we are obligated to indemnify the selling stockholders in the event of material misstatements or omissions in the applicable registration statement attributable to us, and the selling stockholders are obligated to indemnify us for material misstatements or omissions in the registration statement attributable to them.

166


Table of Contents

Anti-takeover effects of Delaware law and our charter and bylaws

        Delaware law contains, and upon the completion of this offering our restated certificate of incorporation and our bylaws will contain, provisions that could have the effect of delaying, deferring or discouraging another party from acquiring control of us. These provisions, which are summarized below, are expected to discourage coercive takeover practices and inadequate takeover bids. These provisions are also designed to encourage persons seeking to acquire control of us to first negotiate with our board of directors.

Staggered board; removal of directors

        Upon the completion of this offering, our restated certificate of incorporation and bylaws will divide our board of directors into three classes with staggered three-year terms. In addition, a director will only be able to be removed for cause and only by the affirmative vote of the holders of at least 75% of the votes that all of our stockholders would be entitled to cast in an annual election of directors. Any vacancy on our board of directors, including a vacancy resulting from an enlargement of our board of directors, will only be able to be filled by vote of a majority of our directors then in office. The classification of our board of directors and the limitations on the removal of directors and filling of vacancies could make it more difficult for a third party to acquire, or discourage a third party from seeking to acquire, control of our company.

Stockholder action by written consent; special meetings

        Upon the completion of this offering, our restated certificate of incorporation will provide that any action required or permitted to be taken by our stockholders must be effected at a duly called annual or special meeting of such holders and may not be effected by any consent in writing by such holders. Upon the completion of this offering, our restated certificate of incorporation and bylaws will also provide that, except as otherwise required by law, special meetings of our stockholders can only be called by our chairman of the board, our Chief Executive Officer or our board of directors.

Advance notice requirements for stockholder proposals

        Upon the completion of this offering, our bylaws will establish an advance notice procedure for stockholder proposals to be brought before an annual meeting of stockholders, including proposed nominations of persons for election to our board of directors. Stockholders at an annual meeting will only be able to consider proposals or nominations specified in the notice of meeting or brought before the meeting by or at the direction of our board of directors or by a stockholder of record on the record date for the meeting who is entitled to vote at the meeting and who has delivered timely written notice in proper form to our secretary of the stockholder's intention to bring such business before the meeting. These provisions could have the effect of delaying until the next stockholder meeting stockholder actions that are favored by the holders of a majority of our outstanding voting securities.

Delaware business combination statute

        Upon the completion of this offering, we will be subject to Section 203 of the Delaware General Corporation Law. Subject to certain exceptions, Section 203 prevents us from engaging in a "business combination" with any "interested stockholder" for three years following the date that the person became an interested stockholder, unless the interested stockholder attained such status with the approval of our board of directors, the business combination is approved by our board of directors and stockholders in a prescribed manner or the interested stockholder acquired at least 85% of our outstanding voting stock in the transaction in which it became an interested stockholder. A "business combination" includes, among other things, a merger or consolidation involving us and

167


Table of Contents

the "interested stockholder" and the sale of more than 10% of our assets to the interested stockholder. In general, an "interested stockholder" is any entity or person beneficially owning 15% or more of our outstanding voting stock and any entity or person who is an associate or an affiliate of such entity or person.

Authorized but unissued shares

        The authorized but unissued shares of common stock and preferred stock are available for future issuance without stockholder approval, subject to any limitations imposed by the NASDAQ Listing Rules. These additional shares may be used for a variety of corporate finance transactions, acquisitions and employee benefit plans. The existence of authorized but unissued and unreserved common stock and preferred stock could make it more difficult or discourage an attempt to obtain control of us by means of a proxy contest, tender offer, merger or otherwise.

Amendment of certificate of incorporation and bylaws

        The Delaware General Corporation Law provides generally that the affirmative vote of a majority of the shares entitled to vote on any matter is required to amend a corporation's certificate of incorporation, unless a corporation's certificate of incorporation requires a greater percentage. Effective upon the completion of this offering, our bylaws may be amended or repealed by a majority vote of our board of directors or by the affirmative vote of the holders of at least 75% of the votes that all of our stockholders would be entitled to cast in any annual election of directors. In addition, the affirmative vote of the holders of at least 75% of the votes that all of our stockholders would be entitled to cast in any annual election of directors is required to amend or repeal or to adopt any provisions inconsistent with any of the provisions of our restated certificate of incorporation described above under "—Staggered board; removal of directors" and "—Stockholder action by written consent; special meetings."

        Effective upon the closing of this offering, our certificate of incorporation will provide that the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (1) any derivative action or proceeding brought on behalf of our company, (2) any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers or employees to our company or our stockholders, (3) any action asserting a claim against our company arising pursuant to any provision of the Delaware General Corporation Law or our certificate of incorporation or bylaws or (4) any action asserting a claim governed by the internal affairs doctrine. Although our certificate of incorporation contains the choice of forum provision described above, it is possible that a court could rule that such a provision is inapplicable for a particular claim or action or that such provision is unenforceable. See "Certain Relationships and Related-Persons Transactions—Corporate opportunities" for a summary of the provisions of our certificate of incorporation related to corporate opportunities.

Listing on the NASDAQ Global Market

        We have applied to have our common stock listed on the NASDAQ Global Market under the symbol "CFMS."

Transfer agent and registrar

        The transfer agent and registrar for our common stock will be American Stock Transfer & Trust Company.

168


Table of Contents


SHARES ELIGIBLE FOR FUTURE SALE

        Prior to this offering, there has been no public market for our common stock, and a liquid public trading market for our common stock may not develop or be sustained after this offering. Future sales of substantial amounts of our common stock in the public market, including shares issued upon exercise of outstanding options or warrants or in the public market after this offering, or the anticipation of those sales, could adversely affect market prices prevailing from time to time and could impair our ability to raise capital through sales of our equity securities. We have applied to have our common stock listed on the NASDAQ Global Market under the symbol "CFMS."

        Upon the closing of this offering, we will have outstanding 39,062,616 shares of our common stock, after giving effect to the following:

        Of the shares to be outstanding immediately after the closing of this offering, the 9,000,000 shares sold in this offering (assuming that the underwriters do not exercise their option to purchase additional shares), will be freely tradable without restriction or further registration under the Securities Act, except for any shares purchased by our "affiliates," as that term is defined in Rule 144 under the Securities Act, or Rule 144, whose sales would be subject to the Rule 144 resale restrictions described below, other than the holding period requirement.

        The remaining 30,062,616 shares of common stock will be "restricted securities," as that term is defined in Rule 144 under the Securities Act or will further be subject to either restrictions on transfer under the lock-up agreements described below or restrictions on transfer for a period of 180 days from the effectiveness of the registration statement of which this prospectus forms a part under stock option agreements entered into between us and the holders of those shares. Following the expiration of these restrictions, these shares will become eligible for public sale if they are registered under the Securities Act or if they qualify for an exemption from registration under Rules 144 or 701 under the Securities Act, which are summarized below.

        In addition, of the 5,622,475 shares of common stock that were issuable pursuant to stock options outstanding as of May 31, 2015, options to purchase 4,149,825 shares of common stock had vested and were exercisable as of May 31, 2015. Upon exercise, these shares will be eligible for sale, subject to the lock-up agreements and securities laws described below. All of the 684,334 shares of our capital stock (calculated on an as-converted basis giving effect to the closing of this

169


Table of Contents

offering, the assumed warrant exercises and the Series D warrant exchange) that were issuable pursuant to our warrants outstanding as of May 31, 2015 were exercisable as of May 31, 2015 and upon issuance these shares will be eligible for sale, subject to the lock-up agreements and securities laws described below.

Rule 144

Affiliate resales of restricted securities

        In general, beginning 90 days after the effective date of the registration statement of which this prospectus forms a part, a person who is an affiliate of ours, or who was an affiliate at any time during the 90 days before a sale, who has beneficially owned shares of our common stock for at least six months would be entitled to sell in "broker's transactions" or certain "riskless principal transactions" or to market makers, a number of shares within any three-month period that does not exceed the greater of:

        Affiliate resales under Rule 144 are also subject to the availability of current public information about us. In addition, if the number of shares being sold under Rule 144 by an affiliate during any three-month period exceeds 5,000 shares or has an aggregate sale price in excess of $50,000, the seller must file a notice on Form 144 with the SEC and the NASDAQ Stock Market concurrently with either the placing of a sale order with the broker or the execution directly with a market maker.

Non-affiliate resales of restricted securities

        In general, beginning 90 days after a person who is not an affiliate of ours at the time of sale, and has not been an affiliate at any time during the three months preceding a sale, and who has beneficially owned shares of our common stock for at least six months but less than a year, is entitled to sell such shares subject only to the availability of current public information about us. If such person has held our shares for at least one year, such person can resell under Rule 144(b)(1) without regard to any Rule 144 restrictions, including the 90-day public company requirement and the current public information requirement.

        Non-affiliate resales are not subject to the manner of sale, volume limitation or notice filing provisions of Rule 144.

        In general, under Rule 701 of the Securities Act, any of our employees, consultants or advisors, other than our affiliates, who purchased shares from us in connection with a qualified compensatory stock plan or other written agreement is eligible to resell these shares 90 days after the effective date of the registration statement of which this prospectus forms a part, in reliance on Rule 144, but without compliance with the various restrictions, including the availability of public information about us, holding period and volume limitations, contained in Rule 144. Subject to the 180-day lock-up period described below, approximately 751,735 shares of our common stock, based on shares outstanding as of May 31, 2015, will be eligible for sale in accordance with Rule 701.

Lock-up agreements

        We, and each of our executive officers and directors and the holders of substantially all of our outstanding stock have agreed that, without the prior written consent of J.P. Morgan Securities LLC

170


Table of Contents

and Deutsche Bank Securities Inc., we and they will not, subject to certain exceptions, during the period ending 180 days after the date of this prospectus:

Registration rights

        Pursuant to the terms of the Registration Rights Agreement described under "Description of Capital Stock—Registration rights," subject to the lock-agreements described above under "—Lock-up agreements," upon the closing of the offering contemplated by the registration statement of which this prospectus forms a part, the holders of an aggregate of 25,497,480 shares of our common stock that will be issued upon conversion of our preferred stock, which we refer to as registrable shares, will have the right to require us to register these registrable shares under the Securities Act, and to participate in future registrations of securities by us, under the circumstances and subject to the conditions described above under "Description of Capital Stock—Registration rights." In addition, subject to the lock-up agreements described above under "—Lock-up agreements," upon the closing of the offering contemplated by the registration statement of which this prospectus forms a part, the holders of warrants to purchase an aggregate of 684,334 shares of our common stock, assuming conversion of our preferred stock into common stock upon the closing of the offering, the assumed warrant exercises and the Series D warrant exchange will have the right to have the shares of common stock issuable upon exercise of such warrants be treated as registrable shares and, subject to certain conditions, to require us to register these registrable shares under the Securities Act, and to participate in future registrations of securities by us under the circumstances and subject to the conditions described above under "Description on Capital Stock—Registration rights." After registration pursuant to these rights and expiration of the lock-up agreements, these shares will become freely tradable without restriction under the Securities Act. See "Description of Capital Stock—Registration rights" for additional information regarding these registration rights.

Stock options and warrants

        As of May 31, 2015, we had outstanding options to purchase 5,622,475 shares of common stock, of which options to purchase 4,149,825 shares of common stock were vested and exercisable. Following this offering, we intend to file registration statements on Form S-8 under the Securities Act to register all of the shares of common stock subject to outstanding options and options and other awards issuable pursuant to the 2004 Plan, 2011 Plan and 2015 Plan.

        As of May 31, 2015, we also had outstanding and exercisable warrants to purchase 684,334 shares of our capital stock (calculated on an as-converted basis giving effect to the closing of this offering, the assumed warrant exercises and the Series D warrant exchange). Any shares purchased by our non-affiliates pursuant to the cashless exercise features of our warrants will be freely tradable under Rule 144(b)(1), subject to a 180-day lock-up period. Any shares purchased through the exercise of these warrants for cash will be eligible for sale subject to the lock-up agreements and securities laws described above.

171


Table of Contents


MATERIAL U.S. FEDERAL TAX CONSIDERATIONS FOR
NON-U.S. HOLDERS OF COMMON STOCK

        The following is a discussion of the material U.S. federal income and estate tax considerations applicable to non-U.S. holders with respect to their ownership and disposition of shares of our common stock. For purposes of this discussion, a non-U.S. holder means a beneficial owner (other than a partnership or other pass-through entity) of our common stock that is not for U.S. federal income tax purposes:

        This discussion does not address the tax treatment of partnerships or other entities that are pass-through entities for U.S. federal income tax purposes or persons that hold their common stock through partnerships or other pass-through entities. A partner in a partnership or other pass-through entity that will hold our common stock should consult his, her or its own tax advisor regarding the tax consequences of acquiring, holding and disposing of our common stock through a partnership or other pass-through entity, as applicable.

        This discussion is based on current provisions of the Code, existing and proposed U.S. Treasury Regulations promulgated thereunder, current administrative rulings and judicial decisions, all as in effect as of the date of this prospectus, all of which are subject to change or to differing interpretation, possibly with retroactive effect. Any change could alter the tax consequences to non-U.S. holders described in this prospectus. There can be no assurance that the Internal Revenue Service, which we refer to as the IRS, will not challenge one or more of the tax consequences described herein. We assume in this discussion that a non-U.S. holder holds shares of our common stock as a capital asset, generally property held for investment.

        This discussion does not address all aspects of U.S. federal income and estate taxation that may be relevant to a particular non-U.S. holder in light of that non-U.S. holder's individual circumstances nor does it address any aspects of U.S. state, local or non-U.S. taxes, the alternative minimum tax or the Medicare tax on net investment income. This discussion also does not consider any specific facts or circumstances that may apply to a non-U.S. holder and does not address the special tax rules applicable to particular non-U.S. holders, such as:

172


Table of Contents

        All prospective non-U.S. holders of our common stock should consult their own tax advisors with respect to the U.S. federal, state, local and non-U.S. tax consequences of the purchase, ownership and disposition of our common stock.

Distributions on our common stock

        Distributions on our common stock, if any, generally will constitute dividends for U.S. federal income tax purposes to the extent paid from our current or accumulated earnings and profits, as determined under U.S. federal income tax principles. If a distribution exceeds our current and accumulated earnings and profits, the excess will be treated as a tax-free return of the non-U.S. holder's investment, up to such holder's tax basis in the common stock. Any remaining excess will be treated as capital gain, subject to the tax treatment described below in "—Gain on sale, exchange or other disposition of our common stock." Any such distributions will also be subject to the discussion below under the section titled "—Withholding and information reporting requirements—FATCA."

        Dividends paid to a non-U.S. holder generally will be subject to withholding of U.S. federal income tax at a 30% rate or such lower rate as may be specified by an applicable income tax treaty between the United States and such holder's country of residence.

        A non-U.S. holder of our common stock who claims the benefit of an applicable income tax treaty between the United States and such holder's country of residence generally will be required to provide a properly executed IRS Form W-8BEN or W-8BEN-E (or successor form) and satisfy applicable certification and other requirements. Non-U.S. holders are urged to consult their tax advisors regarding their entitlement to benefits under a relevant income tax treaty.

        Dividends that are treated as effectively connected with a trade or business conducted by a non-U.S. holder within the United States and, if an applicable income tax treaty so provides, that are attributable to a permanent establishment or a fixed base maintained by the non-U.S. holder within the United States, are generally exempt from the 30% withholding tax if the non-U.S. holder satisfies applicable certification and disclosure requirements, generally by providing IRS Form W-8ECI. However, such U.S. effectively connected income, net of specified deductions and credits, is taxed at the same graduated U.S. federal income tax rates applicable to United States persons (as defined in the Code). Any U.S. effectively connected income received by a non-U.S. holder that is a corporation may also, under certain circumstances, be subject to an additional "branch profits tax" at a 30% rate or such lower rate as may be specified by an applicable income tax treaty between the United States and such holder's country of residence.

        A non-U.S. holder that is eligible for a reduced rate of U.S. withholding tax under an income tax treaty may obtain a refund or credit of any excess amounts withheld by timely filing a U.S. tax return with the IRS.

Gain on sale, exchange or other disposition of our common stock

        In general (subject to the discussion below under the section titled "—Withholding and information reporting requirements—FATCA"), a non-U.S. holder will not be subject to any U.S.

173


Table of Contents

federal income tax on any gain realized upon such holder's sale, exchange or other disposition of shares of our common stock unless:

U.S. federal estate tax

        Shares of our common stock that are owned or treated as owned at the time of death by an individual who is not a citizen or resident of the United States, as specifically defined for U.S. federal estate tax purposes, are considered U.S. situs assets and will be included in the individual's gross estate for U.S. federal estate tax purposes. Such shares, therefore, may be subject to U.S. federal estate tax, unless an applicable estate tax or other treaty provides otherwise.

Backup withholding and information reporting

        We must report annually to the IRS and to each non-U.S. holder the gross amount of the distributions on our common stock paid to such holder and the tax withheld, if any, with respect to such distributions. Non-U.S. holders may have to comply with specific certification procedures to establish that the holder is not a United States person (as defined in the Code) in order to avoid backup withholding at the applicable rate with respect to dividends on our common stock. Generally, a non-U.S. holder will comply with such procedures if it provides a properly executed

174


Table of Contents

IRS Form W-8BEN or W-8BEN-E (or other applicable Form W-8) or otherwise meets documentary evidence requirements for establishing that it is a non-U.S. holder, or otherwise establishes an exemption. Dividends paid to non-U.S. holders subject to withholding of U.S. federal income tax, as described above in "—Distributions on our common stock," generally will be exempt from U.S. backup withholding.

        Information reporting and backup withholding generally will apply to the proceeds of a disposition of our common stock by a non-U.S. holder effected by or through the U.S. office of any broker, U.S. or foreign, unless the holder certifies its status as a non-U.S. holder and satisfies certain other requirements, or otherwise establishes an exemption. Generally, information reporting and backup withholding will not apply to a payment of disposition proceeds to a non-U.S. holder where the transaction is effected outside the United States through a non-U.S. office of a broker. However, for information reporting purposes, dispositions effected through a non-U.S. office of a broker with substantial U.S. ownership or operations generally will be treated in a manner similar to dispositions effected through a U.S. office of a broker. Non-U.S. holders should consult their own tax advisors regarding the application of the information reporting and backup withholding rules to them.

        Copies of information returns may be made available to the tax authorities of the country in which the non-U.S. holder resides or is incorporated under the provisions of a specific treaty or agreement.

        Backup withholding is not an additional tax. Any amounts withheld under the backup withholding rules from a payment to a non-U.S. holder can be refunded or credited against the non-U.S. holder's U.S. federal income tax liability, if any, provided that an appropriate claim is timely filed with the IRS.

Withholding and information reporting requirements—FATCA

        The Foreign Account Tax Compliance Act, or FATCA, generally imposes a U.S. federal withholding tax at a rate of 30% on payments of dividends on, or gross proceeds from the sale or other disposition of, our common stock paid to a foreign entity unless: (1) if the foreign entity is a "foreign financial institution," such foreign entity undertakes certain due diligence, reporting, withholding and certification obligations; (2) if the foreign entity is not a "foreign financial institution," such foreign entity identifies certain of its U.S. investors, if any; or (3) the foreign entity is otherwise exempt under FATCA. Under applicable U.S. Treasury regulations, withholding under FATCA will apply (1) currently to payments of dividends on our common stock, and (2) to payments of gross proceeds from a sale or other disposition of our common stock made after December 31, 2016. Under certain circumstances, a non-U.S. holder may be eligible for refunds or credits of the tax. An intergovernmental agreement between the United States and an applicable foreign country may modify the requirements described in this paragraph. Non-U.S. holders should consult their own tax advisors regarding the possible implications of this legislation on their investment in our common stock and the entities through which they hold our common stock, including, without limitation, the process and deadlines for meeting the applicable requirements to prevent the imposition of the 30% withholding tax under FATCA.

175


Table of Contents


UNDERWRITING

        We are offering the shares of common stock described in this prospectus through a number of underwriters. J.P. Morgan Securities LLC and Deutsche Bank Securities Inc. are acting as joint book-running managers of the offering and as representatives of the underwriters. We have entered into an underwriting agreement dated the date of this prospectus with the representatives. Subject to the terms and conditions of the underwriting agreement, we have agreed to sell to the underwriters, and each underwriter has severally agreed to purchase, at the public offering price less the underwriting discounts and commissions set forth on the cover page of this prospectus, the number of shares of common stock listed next to its name in the following table:

Name
  Number
of
Shares
 

J.P. Morgan Securities LLC

       

Deutsche Bank Securities Inc. 

       

Wells Fargo Securities, LLC

       

Canaccord Genuity Inc. 

       

Oppenheimer & Co. Inc.

       

Total

    9,000,000  

        The underwriters are committed to purchase all the common shares offered by us if they purchase any shares. The underwriting agreement also provides that if an underwriter defaults, the purchase commitments of non-defaulting underwriters may also be increased or the offering may be terminated.

        The underwriters propose to offer the common shares directly to the public at the initial public offering price set forth on the cover page of this prospectus and to certain dealers at that price less a concession not in excess of $             per share. Any such dealers may resell shares to certain other brokers or dealers at a discount of up to $             per share from the initial public offering price. After the initial public offering of the shares, the offering price and other selling terms may be changed by the underwriters. Sales of shares made outside of the United States may be made by affiliates of the underwriters.

        The underwriters have an option to buy up to 1,350,000 additional shares of common stock from us to cover sales of shares by the underwriters which exceed the number of shares specified in the table above. The underwriters have 30 days from the date of this prospectus to exercise this option. If any shares are purchased with this option, the underwriters will purchase shares in approximately the same proportion as shown in the table above. If any additional shares of common stock are purchased, the underwriters will offer the additional shares on the same terms as those on which the shares are being offered.

        The underwriting fee is equal to the public offering price per share of common stock less the amount paid by the underwriters to us per share of common stock. The following table shows the per share and total underwriting discounts and commissions to be paid to the underwriters assuming both no exercise and full exercise of the underwriters' option to purchase additional shares.

 
  Without
option
exercise
  With full
option
exercise
 

Per share

  $     $    

Total

  $     $    

176


Table of Contents

        We estimate that the total expenses of this offering payable by us, including registration, filing and listing fees, printing fees and legal and accounting expenses, but excluding the underwriting discounts and commissions, will be approximately $4.3 million. We have agreed to reimburse the underwriters for expenses of up to $35,000 related to clearance of this offering with the Financial Industry Regulatory Authority, Inc., or FINRA.

        A prospectus in electronic format may be made available on the web sites maintained by one or more underwriters, or selling group members, if any, participating in the offering. The underwriters may agree to allocate a number of shares to underwriters and selling group members for sale to their online brokerage account holders. Internet distributions will be allocated by the representatives to underwriters and selling group members that may make Internet distributions on the same basis as other allocations.

        We have agreed that we will not (1) offer, pledge, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase or otherwise dispose of, directly or indirectly, or file with the SEC a registration statement under the Securities Act relating to, any shares of our common stock or securities convertible into or exchangeable or exercisable for any shares of our common stock, or publicly disclose the intention to make any offer, sale, pledge, disposition or filing, or (2) enter into any swap or other arrangement that transfers all or a portion of the economic consequences associated with the ownership of any shares of common stock or any such other securities (regardless of whether any of these transactions are to be settled by the delivery of shares of common stock or such other securities, in cash or otherwise), in each case without the prior written consent of J.P. Morgan Securities LLC and Deutsche Bank Securities Inc. for a period of 180 days after the date of this prospectus, subject to certain exceptions, including shares of our common stock or other securities issued in connection with a transaction that includes a commercial relationship (including joint ventures, marketing or distribution arrangements, collaboration agreements or intellectual property license agreements) or any acquisition of assets or not less than a majority or controlling portion of the equity of another entity, provided that the aggregate number of shares of our common stock issued pursuant to this exception shall not exceed 5.0% of the total number of outstanding shares of our common stock immediately following the issuance and sale of the underwritten shares pursuant to the underwriting agreement; provided, further, the recipient of any such shares of our common stock and securities issued pursuant to this exception during the 180-day restricted period described above shall enter into an agreement substantially in the form described below.

        Our directors and executive officers, and each of our significant shareholders have entered into lock-up agreements with the underwriters pursuant to which each of these persons or entities, with limited exceptions, for a period of 180 days after the date of this prospectus, may not, without the prior written consent of J.P. Morgan Securities LLC and Deutsche Bank Securities Inc., (1) offer, pledge, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase, or otherwise transfer or dispose of, directly or indirectly, any shares of our common stock or any securities convertible into or exercisable or exchangeable for our common stock (including without limitation, our common stock or such other securities which may be deemed to be beneficially owned by our directors and executive officers, and each of our significant shareholders in accordance with the rules and regulations of the SEC and securities which may be issued upon exercise of a stock option or warrant), or publicly disclose the intention to make any offer, sale, pledge or disposition, (2) enter into any swap or other agreement that transfers, in whole or in part, any of the economic consequences of ownership of our common stock or such other securities, whether any such transaction described in clause (1) or (2) above is to be settled by delivery of our common stock or such other securities, in cash or otherwise or (3) make any demand for or exercise any right with

177


Table of Contents

respect to the registration of any shares of our common stock or any security convertible into or exercisable or exchangeable for our common stock, in each case subject to certain exceptions.

        We have agreed to indemnify the underwriters against certain liabilities, including liabilities under the Securities Act.

        We have applied to have our common stock approved for listing/quotation on the NASDAQ Global Market under the symbol "CFMS".

        In connection with this offering, the underwriters may engage in stabilizing transactions, which involves making bids for, purchasing and selling shares of common stock in the open market for the purpose of preventing or retarding a decline in the market price of the common stock while this offering is in progress. These stabilizing transactions may include making short sales of the common stock, which involves the sale by the underwriters of a greater number of shares of common stock than they are required to purchase in this offering, and purchasing shares of common stock on the open market to cover positions created by short sales. Short sales may be "covered" shorts, which are short positions in an amount not greater than the underwriters' option to purchase additional shares referred to above, or may be "naked" shorts, which are short positions in excess of that amount. The underwriters may close out any covered short position either by exercising their option to purchase additional shares, in whole or in part, or by purchasing shares in the open market. In making this determination, the underwriters will consider, among other things, the price of shares available for purchase in the open market compared to the price at which the underwriters may purchase shares through the option to purchase additional shares. A naked short position is more likely to be created if the underwriters are concerned that there may be downward pressure on the price of the common stock in the open market that could adversely affect investors who purchase in this offering. To the extent that the underwriters create a naked short position, they will purchase shares in the open market to cover the position.

        The underwriters have advised us that, pursuant to Regulation M of the Securities Act, they may also engage in other activities that stabilize, maintain or otherwise affect the price of the common stock, including the imposition of penalty bids. This means that if the representatives of the underwriters purchase common stock in the open market in stabilizing transactions or to cover short sales, the representatives can require the underwriters that sold those shares as part of this offering to repay the underwriting discount received by them.

        These activities may have the effect of raising or maintaining the market price of the common stock or preventing or retarding a decline in the market price of the common stock, and, as a result, the price of the common stock may be higher than the price that otherwise might exist in the open market. If the underwriters commence these activities, they may discontinue them at any time. The underwriters may carry out these transactions on the NASDAQ Global Market, in the over-the-counter market or otherwise.

        Prior to this offering, there has been no public market for our common stock. The initial public offering price will be determined by negotiations between us and the representatives of the underwriters. In determining the initial public offering price, we and the representatives of the underwriters expect to consider a number of factors including:

178


Table of Contents

        Neither we nor the underwriters can assure investors that an active trading market will develop for our common shares, or that the shares will trade in the public market at or above the initial public offering price.

        Other than in the United States, no action has been taken by us or the underwriters that would permit a public offering of the securities offered by this prospectus in any jurisdiction where action for that purpose is required. The securities offered by this prospectus may not be offered or sold, directly or indirectly, nor may this prospectus or any other offering material or advertisements in connection with the offer and sale of any such securities be distributed or published in any jurisdiction, except under circumstances that will result in compliance with the applicable rules and regulations of that jurisdiction. Persons into whose possession this prospectus comes are advised to inform themselves about and to observe any restrictions relating to the offering and the distribution of this prospectus. This prospectus does not constitute an offer to sell or a solicitation of an offer to buy any securities offered by this prospectus in any jurisdiction in which such an offer or a solicitation is unlawful.

        This document is only being distributed to and is only directed at (1) persons who are outside the United Kingdom; (2) investment professionals falling within Article 19(5) of the Financial Services and Markets Act 2000 (Financial Promotion) Order 2005 (the "Order"); or (3) high net worth entities, and other persons to whom it may lawfully be communicated, falling within Article 49(2)(a) to (d) of the Order (all such persons together being referred to as "relevant persons"). The securities are only available to, and any invitation, offer or agreement to subscribe, purchase or otherwise acquire such securities will be engaged in only with, relevant persons. Any person who is not a relevant person should not act or rely on this document or any of its contents.

Selling restrictions

European Economic Area

        In relation to each Member State of the European Economic Area which has implemented the Prospectus Directive (each, a "Relevant Member State"), from and including the date on which the European Union Prospectus Directive (the "EU Prospectus Directive") was implemented in that Relevant Member State (the "Relevant Implementation Date"), an offer of securities described in this prospectus may not be made to the public in that Relevant Member State prior to the publication of a prospectus in relation to the shares which has been approved by the competent authority in that Relevant Member State or, where appropriate, approved in another Relevant Member State and notified to the competent authority in that Relevant Member State, all in accordance with the EU Prospectus Directive, except that, with effect from and including the Relevant Implementation Date, an offer of securities described in this prospectus may be made to the public in that Relevant Member State at any time:

provided that no such offer of securities described in this prospectus shall result in a requirement for the publication by us of a prospectus pursuant to Article 3 of the EU Prospectus Directive.

179


Table of Contents

        For the purposes of this provision, the expression an "offer of securities to the public" in relation to any securities in any Relevant Member State means the communication in any form and by any means of sufficient information on the terms of the offer and the securities to be offered so as to enable an investor to decide to purchase or subscribe for the securities, as the same may be varied in that Member State by any measure implementing the EU Prospectus Directive in that Member State. The expression "EU Prospectus Directive" means Directive 2003/71/EC (and any amendments thereto, including the 2010 PD Amending Directive, to the extent implemented in the Relevant Member State) and includes any relevant implementing measure in each Relevant Member State, and the expression "2010 PD Amending Directive" means Directive 2010/73/EU.

United Kingdom

        Each of the underwriters has:

Switzerland

        The shares may not be publicly offered in Switzerland and will not be listed on the SIX Swiss Exchange ("SIX") or on any other stock exchange or regulated trading facility in Switzerland. This document has been prepared without regard to the disclosure standards for issuance prospectuses under art. 652a or art. 1156 of the Swiss Code of Obligations or the disclosure standards for listing prospectuses under art. 27 ff. of the SIX Listing Rules or the listing rules of any other stock exchange or regulated trading facility in Switzerland. Neither this document nor any other offering or marketing material relating to the shares or the offering may be publicly distributed or otherwise made publicly available in Switzerland.

        Neither this document nor any other offering or marketing material relating to the offering, the Company or the shares have been or will be filed with or approved by any Swiss regulatory authority. In particular, this document will not be filed with, and the offer of shares will not be supervised by, the Swiss Financial Market Supervisory Authority FINMA ("FINMA"), and the offer of shares have not been and will not be authorized under the Swiss Federal Act on Collective Investment Schemes ("CISA"). The investor protection afforded to acquirers of interests in collective investment schemes under the CISA does not extend to acquirers of shares.

United Arab Emirates

        This prospectus relates to an Exempt Offer in accordance with the Offered Securities Rules of the Dubai Financial Services Authority ("DFSA"). This prospectus is intended for distribution only to persons of a type specified in the Offered Securities Rules of the DFSA. It must not be delivered to, or relied on by, any other person. The DFSA has no responsibility for reviewing or verifying any documents in connection with Exempt Offers. The DFSA has not approved this prospectus nor taken steps to verify the information set forth herein and has no responsibility for the prospectus. The shares to which this prospectus relates may be illiquid and/or subject to restrictions on their resale. Prospective purchasers of the shares offered should conduct their own due diligence on the

180


Table of Contents

shares. If you do not understand the contents of this prospectus you should consult an authorized financial advisor.

Qatar

        This offering of the securities does not constitute a public offer of securities in the State of Qatar under Law No. 5 of 2002 (the Commercial Companies Law). The securities are only being offered to a limited number of investors who are willing and able to conduct an independent investigation of the risks involved in an investment in the securities or have sufficient knowledge of the risks involved in an investment in the securities. No transaction will be concluded in the jurisdiction of the State of Qatar.

Australia

        No placement document, prospectus, product disclosure statement or other disclosure document has been lodged with the Australian Securities and Investments Commission ("ASIC"), in relation to the offering. This prospectus does not constitute a prospectus, product disclosure statement or other disclosure document under the Corporations Act 2001 (the "Corporations Act"), and does not purport to include the information required for a prospectus, product disclosure statement or other disclosure document under the Corporations Act.

        Any offer in Australia of the securities may only be made to persons (the "Exempt Investors") who are "sophisticated investors" (within the meaning of section 708(8) of the Corporations Act), "professional investors" (within the meaning of section 708(11) of the Corporations Act) or otherwise pursuant to one or more exemptions contained in section 708 of the Corporations Act so that it is lawful to offer the securities without disclosure to investors under Chapter 6D of the Corporations Act.

        The securities applied for by Exempt Investors in Australia must not be offered for sale in Australia in the period of 12 months after the date of allotment under the offering, except in circumstances where disclosure to investors under Chapter 6D of the Corporations Act would not be required pursuant to an exemption under section 708 of the Corporations Act or otherwise or where the offer is pursuant to a disclosure document which complies with Chapter 6D of the Corporations Act. Any person acquiring securities must observe such Australian on-sale restrictions.

        This prospectus contains general information only and does not take account of the investment objectives, financial situation or particular needs of any particular person. It does not contain any securities recommendations or financial product advice. Before making an investment decision, investors need to consider whether the information in this prospectus is appropriate to their needs, objectives and circumstances, and, if necessary, seek expert advice on those matters.

Hong Kong

        The securities have not been offered or sold and will not be offered or sold in Hong Kong, by means of any document, other than (a) to "professional investors" as defined in the Securities and Futures Ordinance (Cap. 571) of Hong Kong and any rules made under that Ordinance; or (b) in other circumstances which do not result in the document being a "prospectus" as defined in the Companies Ordinance (Cap. 32) of Hong Kong or which do not constitute an offer to the public within the meaning of that Ordinance. No advertisement, invitation or document relating to the securities has been or may be issued or has been or may be in the possession of any person for the purposes of issue, whether in Hong Kong or elsewhere, which is directed at, or the contents of which are likely to be accessed or read by, the public of Hong Kong (except if permitted to do so under the securities laws of Hong Kong) other than with respect to securities which are or are

181


Table of Contents

intended to be disposed of only to persons outside Hong Kong or only to "professional investors" as defined in the Securities and Futures Ordinance and any rules made under that Ordinance.

Japan

        The securities have not been and will not be registered under the Financial Instruments and Exchange Law of Japan (Law No. 25 of 1948, as amended) and, accordingly, will not be offered or sold, directly or indirectly, in Japan, or for the benefit of any Japanese Person or to others for re-offering or resale, directly or indirectly, in Japan or to any Japanese Person, except in compliance with all applicable laws, regulations and ministerial guidelines promulgated by relevant Japanese governmental or regulatory authorities in effect at the relevant time. For the purposes of this paragraph, "Japanese Person" shall mean any person resident in Japan, including any corporation or other entity organized under the laws of Japan.

Singapore

        This prospectus has not been registered as a prospectus with the Monetary Authority of Singapore. Accordingly, this prospectus and any other document or material in connection with the offer or sale, or invitation for subscription or purchase, of securities may not be circulated or distributed, nor may the securities be offered or sold, or be made the subject of an invitation for subscription or purchase, whether directly or indirectly, to persons in Singapore other than (i) to an institutional investor under Section 274 of the Securities and Futures Act, Chapter 289 of Singapore (the "SFA"), (ii) to a relevant person pursuant to Section 275(1), or any person pursuant to Section 275(1A), and in accordance with the conditions specified in Section 275, of the SFA, or (iii) otherwise pursuant to, and in accordance with the conditions of, any other applicable provision of the SFA.

        Where the securities are subscribed or purchased under Section 275 of the SFA by a relevant person which is:

182


Table of Contents

Other activities

        Certain of the underwriters and their affiliates may provide from time to time in the future certain commercial banking, financial advisory, investment banking and other services for us or our affiliates in the ordinary course of their business, for which they may receive customary fees and commissions. In addition, an affiliate of Wells Fargo Securities, LLC, an underwriter in the offering contemplated by the registration statement of which this prospectus forms a part, has issued a standby letter of credit as security for the lease of office space by us under which the affiliate receives customary fees.

        From time to time, certain of the underwriters and their affiliates may effect transactions for their own account or the account of customers, and hold on behalf of themselves or their customers, long or short positions in our debt or equity securities or loans.

        The underwriters and their respective affiliates are full service financial institutions engaged in various activities, which may include securities trading, commercial and investment banking, financial advisory, investment management, investment research, principal investment, hedging, financing and brokerage activities.

        The underwriters and their respective affiliates may also make investment recommendations and/or publish or express independent research views in respect of such securities or instruments and may at any time hold, or recommend to clients that they acquire, long and/or short positions in such securities and instruments.

183


Table of Contents


LEGAL MATTERS

        The validity of the shares of common stock being offered will be passed upon for us by Wilmer Cutler Pickering Hale and Dorr LLP. Davis Polk & Wardwell LLP is acting as counsel for the underwriters in connection with this offering.


EXPERTS

        The audited consolidated financial statements included in this prospectus and elsewhere in the registration statement have been so included in reliance upon the report of Grant Thornton LLP, independent registered public accountants, upon authority of said firm as experts in accounting and auditing.


WHERE YOU CAN FIND MORE INFORMATION

        We have filed with the SEC a registration statement on Form S-1 under the Securities Act with respect to the shares of common stock to be sold in this offering. This prospectus, which constitutes part of the registration statement, does not include all of the information contained in the registration statement and the exhibits, schedules and amendments to the registration statement. Some items are omitted in accordance with the rules and regulations of the SEC. For further information with respect to us and our common stock, we refer you to the registration statement and to the exhibits and schedules to the registration statement. Statements contained in this prospectus about the contents of any contract or any other document filed as an exhibit are not necessarily complete, and in each instance, we refer you to the copy of the contract or other documents filed as an exhibit to the registration statement. Each of these statements is qualified in all respects by this reference.

        You may read and copy the registration statement of which this prospectus is a part without charge at the SEC's public reference room, which is located at 100 F Street, N.E., Room 1580, Washington, D.C. 20549. You can request copies of the registration statement by writing to the SEC and paying a fee for the copying cost. Please call the SEC at 1-800-SEC-0330 for more information about the operation of the SEC's public reference room. In addition, the SEC maintains an Internet website, which is located at www.sec.gov, that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC. You may access the registration statement of which this prospectus is a part at the SEC's Internet website.

        Upon completion of this offering, we will be subject to the informational and periodic reporting requirements of the Exchange Act. We will fulfill our obligations with respect to such requirements by filing periodic reports and other information with the SEC. We intend to furnish our stockholders with annual reports containing consolidated financial statements certified by an independent registered public accounting firm. We also maintain a website at www.conformis.com. The information contained on, or that can be accessed through, our website is not a part of, and is not incorporated into, this prospectus. We have included our website address in this prospectus solely as an inactive textual reference.

184


Table of Contents


INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 
  Page

Report of Independent Registered Public Accounting Firm

  F-2

Consolidated Financial Statements

   

Consolidated Balance Sheets as of December 31, 2013 and 2014, and March 31, 2015 (unaudited)

  F-3

Consolidated Statements of Operations for the Years Ended December 31, 2013 and 2014, and the Three Months Ended March 31, 2014 and 2015 (unaudited)

  F-4

Consolidated Statements of Comprehensive Loss for the Years Ended December 31, 2013 and 2014, and the Three Months Ended March 31, 2014 and 2015 (unaudited)

  F-5

Consolidated Statements of Changes in Stockholders' Equity for the Years Ended December 31, 2013 and 2014, and the Three Months Ended March 31, 2015 (unaudited)

  F-6

Consolidated Statements of Changes in Cash Flows for the Years Ended December 31, 2013 and 2014, and the Three Months Ended March 31, 2014 and 2015 (unaudited)

  F-7

Notes to Consolidated Financial Statements

  F-8

F-1


Table of Contents


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders
ConforMIS, Inc.

We have audited the accompanying consolidated balance sheets of ConforMIS, Inc. (a Delaware corporation) and subsidiaries (the "Company") as of December 31, 2014 and 2013, and the related consolidated statements of operations, comprehensive loss, changes in stockholders' equity, and cash flows for each of the two years in the period ended December 31, 2014. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. We were not engaged to perform an audit of the Company's internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of ConforMIS, Inc. and subsidiaries as of December 31, 2014 and 2013, and the results of their operations and their cash flows for each of the two years in the period ended December 31, 2014 in conformity with accounting principles generally accepted in the United States of America.

/s/ GRANT THORNTON LLP

Boston, Massachusetts
March 20, 2015 (Except for note Q, which is as of June 16, 2015)

F-2


Table of Contents

CONFORMIS, INC. AND SUBSIDIARIES

Consolidated Balance Sheets

(in thousands, except share and per share data)

 
  December 31,    
 
 
  March 31,
2015
 
 
  2013   2014  
 
   
   
  (unaudited)
 

Assets

                   

Current Assets

                   

Cash and cash equivalents

  $ 54,221   $ 37,900   $ 22,939  

Accounts receivable, net

    6,196     9,119     9,792  

Inventories

    6,620     7,691     9,038  

Prepaid expenses and other current assets

    683     1,158     2,715  

Total current assets

    67,720     55,868     44,484  

Property and equipment, net

    7,957     8,696     9,626  

Other Assets

                   

Restricted cash

    5,546     4,438     4,381  

Intangible assets, net

    1,492     1,243     1,181  

Goodwill

    753     753     753  

Other long-term assets

    423     280     280  

Total assets

  $ 83,891   $ 71,278   $ 60,705  

Liabilities and stockholders' equity

                   

Current liabilities

                   

Accounts payable

    3,093     3,618     4,968  

Accrued expenses

    8,192     6,942     8,174  

Current portion of long-term debt

    2,158     272     277  

Total current liabilities

    13,443     10,832     13,419  

Other long-term liabilities

    535     271     222  

Long-term debt

    953     10,348     10,283  

Total liabilities

    14,931     21,451     23,924  

Commitments and contingencies

                   

Stockholders' equity

                   

Convertible preferred stock, $0.00001 par value:

                   

Authorized: 53,496,241 shares authorized, 47,811,716 and 50,985,652 shares issued and outstanding at December 31, 2013, and December 31, 2014 and March 31, 2015 (unaudited), respectively; (aggregate liquidation value of $352,626 at December 31, 2014 and March 31, 2015 (unaudited))

             

Common stock, $0.00001 par value:

                   

Authorized: 80,000,000 shares at December 31, 2013, December 31, 2014 and March 31, 2015; 4,161,178, 4,286,164 and 4,314,338 shares issued and outstanding at December 31, 2013, December 31, 2014 and March 31, 2015 (unaudited), respectively

             

Additional paid-in capital

    291,218     318,420     319,634  

Accumulated deficit

    (222,374 )   (268,096 )   (282,353 )

Accumulated other comprehensive income (loss)

    116     (497 )   (500 )

Total stockholders' equity

    68,960     49,827     36,781  

Total liabilities and stockholders' equity

  $ 83,891   $ 71,278   $ 60,705  

   

The accompanying notes are an integral part of these consolidated financial statements.

F-3


Table of Contents

CONFORMIS, INC. AND SUBSIDIARIES

Consolidated Statements of Operations

(in thousands, except share and per share data)

 
  Years Ended
December 31,
  Three Months Ended
March 31,
 
 
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Revenue

  $ 34,597   $ 48,186   $ 10,799   $ 14,700  

Cost of revenue

    27,283     30,638     7,512     9,388  

Gross profit

    7,314     17,548     3,287     5,312  

Operating expenses

   
 
   
 
   
 
   
 
 

Sales and marketing

    26,149     31,103     8,379     9,579  

Research and development

    13,779     15,107     3,578     4,016  

General and administrative

    14,693     16,763     3,948     5,780  

Total operating expenses

    54,621     62,973     15,905     19,375  

Loss from operations

    (47,307 )   (45,425 )   (12,618 )   (14,063 )

Other income and expenses

   
 
   
 
   
 
   
 
 

Interest income

    89     104     25     39  

Interest expense

    (642 )   (360 )   (52 )   (223 )

Total other expenses

    (553 )   (256 )   (27 )   (184 )

Loss before income taxes

    (47,860 )   (45,681 )   (12,645 )   (14,247 )

Income tax provision

    29     41     8     10  

Net loss

  $ (47,889 ) $ (45,722 ) $ (12,653 ) $ (14,257 )

Net loss per share—basic and diluted

  $ (11.98 ) $ (10.78 ) $ (3.04 ) $ (3.32 )

Weighted average common shares outstanding—basic and diluted

    3,996,867     4,239,564     4,165,760     4,296,613  

   

The accompanying notes are an integral part of these consolidated financial statements.

F-4


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Consolidated Statements of Comprehensive Loss

(in thousands)

 
  Years Ended
December 31,
  Three Months Ended
March 31,
 
 
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Net loss

  $ (47,889 ) $ (45,722 ) $ (12,653 ) $ (14,257 )

Other comprehensive income (loss)

   
 
   
 
   
 
   
 
 

Foreign currency translation adjustments

    167     (613 )   8     (3 )

Comprehensive loss

  $ (47,722 ) $ (46,335 ) $ (12,645 ) $ (14,260 )

   

The accompanying notes are an integral part of these consolidated financial statements.

F-5


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Consolidated Statements of Changes in Stockholders' Equity

(in thousands, except share and per share data)

 
  Convertible
Preferred Stock
   
   
   
   
   
   
 
 
  Common Stock    
   
  Accumulated
Other
Comprehensive
Income (Loss)
   
 
 
  Additional
Paid-In
Capital
  Accumulated
Deficit
   
 
 
  Shares   Par Value   Shares   Par Value   Total  

Balance, December 31, 2012

    38,503,591   $     3,827,267   $   $ 217,631   $ (174,485 ) $ (51 ) $ 43,095  

Issuance of common stock—option exercise

                333,911         521                 521  

Issuance of Series E-1 preferred stock

    5,801,250                     49,465                 49,465  

Issuance of warrants to purchase Series E-1 preferred stock

                            1,533                 1,533  

Issuance costs of Series E-1 preferred stock

                            (5,257 )               (5,257 )

Issuance of Series E-2 preferred stock

    3,506,875                     25,000                 25,000  

Issuance costs of Series E-2 preferred stock

                            (12 )               (12 )

Compensation expense related to issued stock options

                            2,337                 2,337  

Net loss

                                  (47,889 )         (47,889 )

Other comprehensive income

                                        167     167  

Balance, December 31, 2013

    47,811,716   $     4,161,178   $   $ 291,218   $ (222,374 ) $ 116   $ 68,960  

Issuance of common stock—option exercise

                124,986         121                 121  

Issuance of Series D preferred stock—warrant exercise

    367,456                     2,205                 2,205  

Issuance of Series E-1 preferred stock

    2,806,480                     22,452                 22,452  

Issuance costs of Series E-1 preferred stock

                            (302 )               (302 )

Issuance of Series E-1 and E-2 preferred stock warrants

                            42                 42  

Issuance costs of common stock warrants

                            134                 134  

Compensation expense related to issued stock options

                            2,550                 2,550  

Net loss

                                  (45,722 )         (45,722 )

Other comprehensive income

                                        (613 )   (613 )

Balance, December 31, 2014

    50,985,652   $     4,286,164   $   $ 318,420   $ (268,096 ) $ (497 ) $ 49,827  

Issuance of common stock—option exercise

                28,174         126                 126  

Compensation expense related to issued stock options

                            1,088                 1,088  

Net loss

                                  (14,257 )         (14,257 )

Other comprehensive income

                                        (3 )   (3 )

Balance, March 31, 2015 (unaudited)

    50,985,652   $     4,314,338   $   $ 319,634   $ (282,353 ) $ (500 ) $ 36,781  

   

The accompanying notes are an integral part of these consolidated financial statements.

F-6


Table of Contents

CONFORMIS, INC. AND SUBSIDIARIES

Consolidated Statements of Cash Flows

(in thousands)

 
  Years Ended
December 31,
  Three Months Ended
March 31,
 
 
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Cash flows from operating activities

                         

Net loss

  $ (47,889 ) $ (45,722 ) $ (12,653 ) $ (14,257 )

Adjustments to reconcile net loss to net cash used by operating activities:

   
 
   
 
   
 
   
 
 

Depreciation and amortization expense

    1,882     2,080     505     548  

Amortization of debt discount

    151     24     13     9  

Stock-based compensation expense

    2,337     2,550     465     1,088  

Provision for bad debts on trade receivables

    14     6     (64 )   42  

Disposal of long term assets

        44          

Changes in operating assets and liabilities:

                         

Accounts receivable

    (2,089 )   (2,929 )   (314 )   (714 )

Inventories

    (1,424 )   (1,071 )   609     (1,348 )

Prepaid expenses and other assets

    47     (332 )   (2 )   (1,557 )

Accounts payable and accrued liabilities

    117     2,075     501     2,581  

Other long-term liabilities

    28     (264 )   (60 )   (49 )

Net cash used in operating activities

    (46,826 )   (43,539 )   (11,000 )   (13,657 )

Cash flows from investing activities

                         

Acquisition of property and equipment

    (4,112 )   (2,614 )   (65 )   (1,415 )

Decrease (increase) in restricted cash

    (4,345 )   1,108     169     56  

Net cash (used) provided in investing activities

    (8,457 )   (1,506 )   104     (1,359 )

Cash flows from financing activities

                         

Net proceeds from issuance of preferred stock

    73,578     21,598     (171 )    

Proceeds from issuance of debt

        10,000          

Payments on notes payable

    (4,496 )   (2,382 )   (1,207 )   (68 )

Proceeds from issuance of common stock

    521     121     31     126  

Net cash (used) provided by financing activities

    69,603     29,337     (1,347 )   58  

Foreign exchange effect on cash and cash equivalents

    167     (613 )   8     (3 )

(Decrease) increase in cash and cash equivalents, beginning of period

    14,487     (16,321 )   (12,235 )   (14,961 )

Cash and cash equivalents, beginning of period

    39,734     54,221     54,221     37,900  

Cash and cash equivalents, end of period

  $ 54,221   $ 37,900   $ 41,986   $ 22,939  

Supplemental information:

                         

Cash paid for income taxes

  $ 123   $ 156   $ 74   $ 29  

Cash paid for interest

  $ 560   $ 162   $ 65   $ 242  

Non cash investing and financing activities

                         

Issuances of Series E-1 and E-2 preferred stock and common stock warrants

  $ 1,533   $ 177   $ 5   $  

   

The accompanying notes are an integral part of these consolidated financial statements.

F-7


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

NOTE A—ORGANIZATION AND BASIS OF PRESENTATION

        ConforMIS, Inc. and subsidiaries (the Company) is a medical technology company that uses its proprietary iFit Image-to-Implant technology platform to develop, manufacture and sell joint replacement implants that are individually sized and shaped, which the Company refers to as customized, to fit each patient's unique anatomy. The Company's proprietary iFit® technology platform is potentially applicable to all major joints. The Company offers a broad line of customized knee implants designed to restore the natural shape of a patient's knee.

        The Company was incorporated in Delaware and commenced operations in 2004. The Company introduced its iUni and iDuo in 2007 and its iTotal CR in 2011. The Company has its corporate offices in Bedford, Massachusetts.

Liquidity and operations

        Since the Company's inception in June 2004, it has financed its operations through private placements of preferred stock, bank debt and convertible debt financings, equipment purchase loans, and, beginning in 2007, product revenue. The Company's product revenue has continued to grow from year-to-year; however, it has not yet attained profitability and continues to incur operating losses. At March 31, 2015, the Company had an accumulated deficit of $282.4 million.

        In November 2014, the Company entered into a senior secured $25 million loan and security agreement with Silicon Valley Bank and Oxford Finance, LLC (the "SVB/Oxford Agreement"), consisting of a revolving line of credit, or the Revolving Line, of up to $5 million and commitments for two $10 million term loans. In November 2014, in connection with the Company's entry into the SVB/Oxford Agreement, the Company drew down the first $10 million term loan (the "SVB/Oxford Term Loan A"). The Company is eligible to draw down a second $10 million term loan on or prior to November 7, 2015 upon meeting certain conditions. As of December 31, 2014 and March 31, 2015, the Company did not have any revolving loans outstanding under the Revolving Line, with $5 million available for borrowing, subject to the Company meeting certain conditions and based on the Company's borrowing base under the Revolving Line. For further information regarding this facility, see "Note J—Debt and Notes Payable—SVB/Oxford" below. The Company expects to incur substantial expenditures in the foreseeable future in connection with the continued expansion of its business.

        The Company's principal sources of funds are revenue generated from the sale of its products and borrowings under its credit facilities. The Company's credit facility with SVB/Oxford is its only committed external source of funds.

        At December 31, 2014, the Company had cash and cash equivalents and investments of $37.9 million and $4.4 million in restricted cash allocated to lease deposits and funding for its Asia strategy. See "Note K—Related Party Transactions" for a description of the Asia strategy. At March 31, 2015, the Company had cash and cash equivalents and investments of $22.9 million and $4.4 million in restricted cash allocated to lease deposits and funding for its Asia strategy.

        As of December 31, 2014, based on the Company's current operating plan, it expects that its existing cash and cash equivalents as of December 31, 2014 and funding available under the SVB/Oxford Agreement without giving effect to any additional financings, will enable it to fund operating expenses, debt service and capital expenditure requirements at least to December 31, 2015.

F-8


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        In the event the Company's existing cash and available financing is not sufficient to fund its operations, the Company may need to engage in equity or debt financings to secure additional funds, including the funds required to pay its existing indebtedness at maturity. The Company may not be able to obtain additional financing on terms favorable to the Company, or at all. In addition, the negative covenants under the SVB/Oxford Agreement, the pledge of the Company's assets as collateral and the negative pledge with respect to its intellectual property could limit its ability to obtain additional financing.

        As of March 31, 2015 (unaudited), based on the Company's current operating plan, it expects that its existing cash and cash equivalents as of March 31, 2015 and funding available under the SVB/Oxford Agreement without giving effect to any additional financings, will enable it to fund operating expenses, debt service and capital expenditure requirement at least to December 31, 2015.

Basis of presentation and use of estimates

        The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements, and the reported amounts of revenue and expenses during the reporting periods. The most significant estimates used in these consolidated financial statements include the valuation of accounts receivable, inventory reserves, intangible valuation, equity instruments, impairment assessments, income tax reserves and related allowances, and the lives of property and equipment. Actual results may differ from those estimates.

Unaudited Interim Financial Information

        The accompanying Interim Financial Statements as of March 31, 2015 and for the three months ended March 31, 2014 and 2015, and related interim information contained within the notes to the Financial Statements are unaudited. These unaudited interim consolidated financial statements have been prepared in accordance with U.S. GAAP. In management's opinion, the unaudited interim consolidated financial statements have been prepared on the same basis as the audited financial statements and include all adjustment's (including normal recurring adjustments) necessary for the fair presentation of the Company's financial position as of March 31, 2015 and its results of operations and its cash flows for the three months ended March 31, 2015 and 2014. The results for the three months ended March 31, 2015 are not necessarily indicative of the results expected for the full fiscal year or any interim period.

Note B—Summary of Significant Accounting Policies

Concentrations of credit risk and other risks and uncertainties

        Financial instruments that subject the Company to credit risk primarily consist of cash, cash equivalents and accounts receivable. The Company maintains the majority of its cash with accredited financial institutions.

        The Company and its contract manufacturers rely on sole source suppliers for certain components. There can be no assurance that a shortage or stoppage of shipments of the materials or components that the Company purchases will not result in a delay in production or adversely

F-9


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

affect the Company's business. The Company is in the process of validating alternate suppliers relative to certain key components, which are expected to be phased in during the coming periods.

        For the years ended December 31, 2013 and 2014 and the three months ended March 31, 2014 and 2015, no customer represented greater than 10% of revenue. There were no customers that represented greater than 10% of the total gross receivable balance at December 31, 2013 or 2014, or March 31, 2015.

Principles of consolidation

        The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries including ImaTx, Inc., ConforMIS Europe GmbH, ConforMIS UK Limited and ConforMIS Hong Kong Limited. All material intercompany balances and transactions have been eliminated in consolidation.

Cash and cash equivalents

        The Company considers all highly liquid investment instruments with original maturities of 90 days or less when purchased, to be cash equivalents. The Company's cash equivalents consist of demand deposits and money market accounts on deposit with certain financial institutions and are carried at cost which approximates their fair value. The associated risk of concentration is mitigated by banking with credit worthy financial institutions.

        The Company had $8.1 million as of December 31, 2013, $1.2 million as of December 31, 2014 and $0.9 million as of March 31, 2015 held in foreign bank accounts. In addition, the Company has recorded restricted cash of $5.5 million as of December 31, 2013 and $4.4 million as of December 31, 2014 and March 31, 2015. Restricted cash consists of $0.8 million as of December 31, 2013, December 31, 2014, and March 31, 2015 of security provided for a lease obligation, and $4.6 million as of December 31, 2013, $3.6 million as of December 31, 2014 and $3.5 million as of March 31, 2015 of proceeds received in connection with the sale of Series E-1 and E-2 preferred stock that is contractually restricted for use (see Note L).

Fair value of financial instruments

        Certain of the Company's financial instruments, including cash and cash equivalents, accounts receivable, accounts payable, accrued expenses and other liabilities are carried at cost, which approximates their fair value because of the short-term maturity of these financial instruments. Based on borrowing rates currently available to the Company for loans with similar terms, the carrying value of the Company's long-term debt approximates its fair value.

Accounts receivable and allowance for doubtful accounts

        Accounts receivable consist of amounts due from medical facilities. In estimating whether accounts receivable can be collected, the Company performs evaluations of customers and continuously monitors collections and payments and estimates an allowance for doubtful accounts based on the aging of the underlying invoices, collections experience to date and any specific collection issues that have been identified. The allowance for doubtful accounts is recorded in the period in which revenue is recorded or at the time potential collection risk is identified.

F-10


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Inventories

        Inventories consist of raw materials, work-in-process components and finished goods. Inventories are stated at the lower of cost, determined using the first-in first-out method, or market value. The Company regularly reviews its inventory quantities on hand and related cost and records a provision for any excess or obsolete inventory based on its estimated forecast of product demand and existing product configurations. The Company also reviews its inventory value to determine if it reflects the lower of cost or market, with market determined based on net realizable value. Appropriate consideration is given to inventory items sold at negative gross margins, purchase commitments and other factors in evaluating net realizable value.

Initial Public Offering Costs

        The Company defers direct incremental costs attributable with the initial public offering ("IPO") of its common stock. These costs represent legal and other direct costs related to the Company's efforts to raise capital through a public sale of its common stock. Future costs will be deferred until the completion of the IPO, at which time they will be reclassified to additional paid-in capital as a reduction of the IPO proceeds. If the Company terminates its plan for an IPO or delays such plan for more than 90 days, any costs deferred will be expensed immediately. IPO costs are included in prepaid expenses and current assets in the consolidated balance sheets as "initial public offering costs." As of March 31, 2015, the Company deferred direct incremental costs attributable with IPO of $1.5 million.

Property and equipment

        Property and equipment is stated at cost less accumulated depreciation and is depreciated using the straight-line method over the estimated useful lives of the respective assets. Leasehold improvements are amortized over their useful life or the life of the lease, whichever is shorter. Assets capitalized under capital leases are amortized in accordance with the respective class of assets and the amortization is included with depreciation expense. Maintenance and repair costs are expensed as incurred.

Intangibles and other long-lived assets

        Intangible assets consist of developed technology and other intellectual property rights licensed from ImaTx as part of the spin-out transaction in 2004. Intangible assets are carried at cost less accumulated amortization.

        The Company tests impairment of long-lived assets when events or changes in circumstances indicate that the assets might be impaired. For assets with determinable useful lives, amortization is computed using the straight-line method over the estimated economic lives of the respective intangible assets.

        Furthermore, periodically the Company assesses whether long-lived assets, including intangible assets, should be tested for recoverability whenever events or circumstances indicate that their carrying value may not be recoverable.

        The amount of impairment, if any, is measured based on fair value, which is determined using estimated undiscounted cash flows to be generated from such assets or group of assets. If the cash flow estimates or the significant operating assumptions upon which they are based change in

F-11


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

the future, the Company may be required to record impairment charges. During 2013 and 2014 and the three months ended March 31, 2015, no such impairment charges were recognized.

Goodwill

        Goodwill relates to amounts that arose in connection with the acquisition of Imaging Therapeutics, Inc. (formerly known as Osteonet.com, renamed ImaTx, Inc.) in 2009. The Company tests goodwill at least annually for impairment, or more frequently when events or changes in circumstances indicate that the assets may be impaired. This impairment test is performed annually during the fourth quarter at the reporting unit level. Goodwill may be considered impaired if the carrying value of the reporting unit, including goodwill, exceeds the reporting unit's fair value. The Company is comprised of one reporting unit. When testing goodwill for impairment, the Company primarily looks to the fair value of the reporting unit, which is typically estimated using a discounted cash flow approach, which requires the use of assumptions and judgments including estimates of future cash flows and the selection of discount rates. The goodwill recognized upon acquiring ImaTx is not deductible for tax purposes. At December 31, 2013 and 2014, the Company proceeded directly to the comparison of the fair value of the reporting unit to its book value. This analysis indicated that no goodwill impairment existed. During the three months ended March 31, 2015, no event occurred that would have an adverse impact on the fair value of the goodwill.

Revenue recognition

        The Company generates revenue from the sale of customized implants and instruments to medical facilities through the use of a combination of direct sales personnel, independent sales representatives and distributors in the United States, Austria, Germany, Ireland, the United Kingdom, Switzerland, Hong Kong and Singapore.

        Revenue is recognized when all of the following criteria are met:

        For a majority of sales to medical facilities, the Company recognizes revenue upon completion of the procedure, which represents satisfaction of the required revenue recognition criteria. For the remaining sales, which are made directly through distributors and generally represent less than 1% of revenue, the Company recognizes revenue at the time of shipment of the product, which represents the point in time when the customer has taken ownership and assumed the risk of loss and the required revenue recognition criteria are satisfied. Such customers are obligated to pay within specified time periods regardless of when or if they ever sell or use the products. Once the revenue recognition criteria have been satisfied the Company does not offer rights of return or price protection and there are no post-delivery obligations.

Shipping and handling costs

        Amounts invoiced to customers for shipping and handling are classified as revenue. Shipping and handling costs incurred are included in general and administrative expense.

F-12


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Taxes collected from customers and remitted to government authorities

        The Company's policy is to present taxes collected from customers and remitted to government authorities on a net basis and not to include tax amounts in revenue.

Research and development expense

        The Company's research and development costs consist of engineering, product development, quality assurance, clinical and regulatory expense. These costs are primarily related to employee compensation, including salary, benefits and stock-based compensation. The Company also incurs costs related to consulting fees, materials and supplies, and marketing studies, including data management and associated travel expense. Research and development costs are expensed as incurred.

Advertising expense

        Advertising costs are expensed as incurred. Advertising expense was approximately $0.3 million for the year ended December 31, 2013, $0.5 million for the year ended December 31, 2014, $0.2 million for the three months ended March 31, 2014 and $0.1 million for the three months ended March 31, 2015.

Segment reporting

        Operating segments are defined as components of an enterprise about which separate financial information is available and is evaluated on a regular basis by the chief operating decision-maker, or decision-making group, in deciding how to allocate resources to an individual segment and in assessing performance of the segment. The Company's chief operating decision-maker is its chief executive officer. The Company's chief executive officer reviews financial information presented on an aggregate basis for purposes of allocating resources and evaluating financial performance. The Company has one business activity and there are no segment managers who are held accountable for operations, operating results and plans for products or components below the aggregate Company level. Accordingly, in light of the Company's current product offerings, management has determined that the primary form of internal reporting is aligned with the offering of the ConforMIS customized joint replacement products and that the Company operates as one segment. (see Note N).

Comprehensive loss

        Comprehensive loss consists of loss and other comprehensive loss. At December 31, 2013 and 2014 and March 31, 2014 and 2015, accumulated other comprehensive loss consists of foreign currency translation adjustments.

Foreign currency translation and transactions

        The assets and liabilities of the Company's foreign operations are translated into U.S. dollars at current exchange rates at the balance sheet date, and income and expense items are translated at average rates of exchange prevailing during the year. Gains and losses realized from transactions denominated in foreign currencies, including intercompany balances not considered permanent investments, are included in the consolidated statements of operations.

F-13


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Income taxes

        Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the consolidated financial statement carrying amounts of existing assets and liabilities and their respective tax bases, operating losses and tax credit carry forwards.

        Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized as income in the period that includes the enactment date.

        The tax benefit from an uncertain tax position is only recognized if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position. The tax benefits recognized in the consolidated financial statements from these positions are measured based on the largest benefit that has a greater than fifty percent likelihood of being realized upon ultimate resolution.

        The Company reviews its tax positions on an annual basis and more frequently as facts surrounding tax positions change. Based on these future events, the Company may recognize uncertain tax positions or reverse current uncertain tax positions, the impact of which would affect the consolidated financial statements.

Medical device excise tax

        The Company is subject to the Health Care and Education Reconciliation Act of 2010 (the "Act"), which imposes a tax equal to 2.3% on the sales price of any taxable medical device by a medical device manufacturer, producer or importer of such device. Under the Act, a taxable medical device is any device defined in section 201(h) of the Federal Food, Drug, and Cosmetic Act, intended for humans, which includes an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article, including any component, part, or accessory, which meets certain requirements. The Company incurred medical device excise tax expense of $0.4 million for the year ended December 31, 2013, $0.7 million for the year ended December 31, 2014, $0.1 million for the three months ended March 31, 2014 and $0.2 million for the three months ended March 31, 2015. Medical device tax is included in general and administrative expense.

Stock-based compensation

        The accounting guidance for stock-based payments requires all stock-based payments to employees and consultants, including grants of stock options, to be recognized in the consolidated statements of operations based on their fair values. The Company uses the Black-Scholes option pricing model to determine the weighted-average fair value of options granted and recognizes the compensation expense of stock-based awards on a straight-line basis over the vesting period of the award.

        The determination of the fair value of stock-based payment awards utilizing the Black-Scholes option pricing model is affected by the stock price, exercise price, and a number of assumptions, including expected volatility of the stock, expected life of the option, risk-free interest rate and expected dividends on the stock. The Company evaluates the assumptions used to value the

F-14


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

awards at each grant date and if factors change and different assumptions are utilized, stock-based compensation expense may differ significantly from what has been recorded in the past. If there are any modifications or cancellations of the underlying unvested securities, the Company may be required to accelerate, increase or cancel any remaining unearned stock-based compensation expense.

        The exercise prices for options grants are set by the Company's board of directors based upon guidance set forth by the American Institute of Certified Public Accountants, or AICPA, in its Technical Practice Aid, "Valuation of Privately Held Company Equity Securities Issued as Compensation".

        To that end, the board considers a number of factors in determining the option price, including: (1) past sales of the Company's convertible preferred stock, and the rights, preferences and privileges of the Company stock, (2) obtaining FDA 510(k) clearance, and (3) achievement of budgeted results. See Note L for a summary of the stock option activity under the Company's stock-based compensation plan.

Net loss per share

        The Company calculates net loss per share in accordance with Accounting Standards Codification 260, Earnings per Share. Basic earnings per share ("EPS") is calculated by dividing the net income or loss for the period by the weighted average number of common shares outstanding for the period, without consideration for common stock equivalents.

        Diluted EPS is computed by dividing the net income or loss for the period by the weighted average number of common shares outstanding for the period and the weighted average number of dilutive common stock equivalents outstanding for the period determined using the treasury stock method.

F-15


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        The following table sets forth the computation of basic and diluted earnings per share attributable to stockholders (in thousands, except share and per share data):

 
  Years Ended December 31,   Three Months Ended
March 31,
 
(in thousands, except share and per share data)
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Numerator:

                         

Numerator for basic and diluted earnings (loss) per share:

                         

Net loss

  $ (47,889 ) $ (45,722 ) $ (12,653 ) $ (14,257 )

Denominator:

                         

Denominator for basic earnings (loss) per share:

                         

Weighted average shares

    3,996,867     4,239,564     4,165,760     4,296,613  

Basic loss per share attributable to ConforMIS, Inc. stockholders

  $ (11.98 ) $ (10.78 ) $ (3.04 ) $ (3.32 )

Diluted loss per share attributable to ConforMIS, Inc. stockholders

  $ (11.98 ) $ (10.78 ) $ (3.04 ) $ (3.32 )

        The following table sets forth potential shares of common stock equivalents that are not included in the calculation of diluted net loss per share because to do so would be anti-dilutive as of the end of each period presented:

 
  December 31,   March 31,  
 
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Series A Preferred

    1,705,138     1,705,138     1,705,138     1,705,138  

Series B Preferred

    2,234,668     2,234,668     2,234,668     2,234,668  

Series C Preferred

    2,453,018     2,453,018     2,453,018     2,453,018  

Series D Preferred

    6,469,904     6,415,106     6,469,904     6,653,633  

Series E-1 Preferred

    4,352,976     6,530,429     5,937,192     7,316,744  

Series E-2 Preferred

    4,181,009     5,129,592     5,129,592     5,129,592  

Series C Preferred Warrants

    29,735     56,202     39,791     78,781  

Series D Preferred Warrants

    49,972     58,365     0     160,056  

Series E-1 Preferred Warrants

    0     0     0     8,674  

Series E-2 Preferred Warrants

    25,555     5,883     0     17,252  

Common stock warrants

    1,708     25,733     2,047     85,181  

Stock options

    2,290,768     2,780,631     2,606,419     3,824,135  

Total

    23,794,451     27,394,765     26,577,769     29,666,872  

Recent accounting pronouncements

        In August 2014, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") No. 2014-15, Presentation of Financial Statements-Going Concern (Subtopic 205-40)—Disclosure of Uncertainties about an Entity's Ability to Continue as a Going Concern (ASU 2014-15). This newly issued accounting standard provides guidance about management's responsibility to evaluate whether there is a substantial doubt about an entity's ability to continue as a going concern and to provide related footnote disclosures. Specifically, the

F-16


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

standard defines the term "substantial doubt", requires an evaluation of every reporting period including interim periods, provides principles for considering the mitigating effect of management's plans, requires certain disclosures when substantial doubt is alleviated as a result of consideration of management's plans, requires an express statement and other disclosures when substantial doubt is not alleviated, and requires an assessment for a period of one year after the date that the financial statements are issued or available to be issued.

        The amendments in ASU 2014-15 are effective for annual periods beginning after December 15, 2016 and interim periods within those reporting periods. Earlier adoption is permitted. We are currently evaluating the impact of this pronouncement on our consolidated financial statements.

        In April 2014, FASB issued ASU No. 2014-08, Reporting Discontinued Operations and Disclosures of Disposals of Components of an Entity. The ASU amendment changes the requirements for reporting discontinued operations in Subtopic 205-20. The amendment is effective on a prospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning on or after December 15, 2014. Early adoption is permitted for disposals that have not been reported in financial statements previously issued. We will apply the provisions of this ASU to any future transactions that qualify for reporting discontinued operations.

        In May 2014, FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606), which supersedes the revenue recognition requirements in ASC 605, Revenue Recognition. This ASU is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. The ASU also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract. The ASU's effective date will be the first quarter of fiscal year 2017 using one of two retrospective application methods. We have not determined the potential effects of this ASU on our consolidated financial statements.

Note C—Fair Value Measurements

        The Fair Value Measurements topic of the FASB Codification establishes a framework for measuring fair value in accordance with US GAAP, clarifies the definition of fair value within that framework and expands disclosures about fair value measurements. This guidance requires disclosure regarding the manner in which fair value is determined for assets and liabilities and establishes a three-tiered value hierarchy into which these assets and liabilities must be grouped, based upon significant levels of inputs as follows:

Level 1—Quoted prices in active markets for identical assets or liabilities.

Level 2—Observable inputs, other than Level 1 prices, such as quoted prices in active markets for similar assets and liabilities, quoted prices for identical or similar assets and liabilities in markets that are not active, or other inputs that are observable or can be corroborated by observable market data.

Level 3—Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities. This includes certain pricing models, discounted cash flow methodologies and similar techniques that use significant unobservable inputs.

F-17


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        The only assets and liabilities subject to fair value measurement standards at December 31, 2013, December 31, 2014 and March 31, 2015 are money market funds that are cash equivalents based on Level 1 inputs. The values of these funds are $33,000 as of December 31, 2013 and $30,000 as of December 31, 2014 and March 31, 2015.

Note D—Accounts Receivable

        Accounts receivable consist of the following (in thousands):

 
  December 31,    
 
 
  March 31,
2015
 
 
  2013   2014  
 
   
   
  (unaudited)
 

Total receivables

  $ 6,430   $ 9,281   $ 9,995  

Allowance for doubtful accounts and returns

    (234 )   (162 )   (203 )

Accounts receivable, net

  $ 6,196   $ 9,119   $ 9,792  

        Write-offs related to accounts receivable were $11,000 for the year ended December 31, 2013, $70,000 for the year ended December 31, 2014, $18,000 for the three months ended March 31, 2014 and $0 for the three months ended March 31, 2015.

Note E—Inventories

        Inventories consist of the following (in thousands):

 
  December 31,    
 
 
  March 31,
2015
 
 
  2013   2014  
 
   
   
  (unaudited)
 

Raw Material

  $ 3,148   $ 3,311   $ 4,056  

Work in process

    798     1,282     1,344  

Finished goods

    2,674     3,098     3,638  

Total Inventories

  $ 6,620   $ 7,691   $ 9,038  

Note F—Property and Equipment

        Property and equipment consist of the following (in thousands):

 
   
  December 31,    
 
 
  Estimated
Useful Life
(Years)
  March 31, 2015  
 
  2013   2014  
 
   
   
   
  (unaudited)
 

Equipment

  5 - 7   $ 7,595   $ 9,598   $ 10,354  

Furniture and fixtures

  5 - 7     359     362     374  

Computer and software

  3     3,465     3,725     4,034  

Leasehold improvements

  2 - 7     880     1,040     1,368  

Total property and equipment

        12,299     14,725     16,130  

Accumulated depreciation

        (4,342 )   (6,029 )   (6,504 )

Property and equipment, net

      $ 7,957   $ 8,696   $ 9,626  

        Depreciation expense related to property and equipment was $1.6 million for the year ended December 31, 2013, $1.8 million for the year ended December 31, 2014, $0.4 million for the three months ended March 31, 2014 and $0.5 million for the three months ended March 31, 2015.

F-18


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Note G—Intangible Assets

        The components of intangible assets are as follows (in thousands):

 
   
  December 31,    
 
 
  Estimated
Useful Life
(Years)
  March 31,
2015
 
 
  2013   2014  
 
   
   
   
  (unaudited)
 

Developed technology

  10   $ 979   $ 979   $ 979  

License agreements

  10     1,508     1,508     1,508  

Total intangible assets

        2,487     2,487     2,487  

Accumulated amortization

        (995 )   (1,244 )   (1,306 )

Intangible assets, net

      $ 1,492   $ 1,243   $ 1,181  

        The Company recognized amortization expense of $0.3 million in both of the years ended December 31, 2013 and 2014, and $0.1 million in both of the three months ended March 31, 2014 and 2015. The weighted-average remaining life of total amortizable intangible assets is 5 years for the developed technology and license agreement.

        The estimated future aggregated amortization expense for intangible assets owned as of March 31, 2015 is as follows (in thousands):

 
  Amortization
expense
 

2015 (remainder of year)

  $ 188  

2016

    249  

2017

    249  

2018

    249  

2019

    246  

  $ 1,181  

Note H—Accrued Expenses

        Accrued expenses consisted of the following at December 31, 2013 and 2014 and March 31, 2015 (in thousands):

 
  December 31,    
 
 
  March 31,
2015
 
 
  2013   2014  
 
   
   
  (unaudited)
 

Accrued employee compensation

  $ 1,710   $ 2,125   $ 2,711  

Accrued initial public offering costs

            1,282  

Accrued finance closing costs

    2,850          

Deferred rent

    288     277     240  

Accrued legal expense

    343     265     380  

Accrued consulting expense

    60     139     56  

Accrued vendor charges

    269     932     1,132  

Accrued revenue share expense

    572     727     752  

Accrued patent settlement and license costs

        750     500  

Accrued other

    2,100     1,727     1,111  

  $ 8,192   $ 6,942   $ 8,174  

F-19


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Note I—Commitments and Contingencies

Operating Leases

        The Company maintains its corporate headquarters in a leased building located in Bedford, Massachusetts, and a manufacturing facility located in Burlington, Massachusetts, both of which are accounted for as operating leases. In August 2014, the Company entered into a lease for a manufacturing facility located in Wilmington, Massachusetts, which will also be accounted for as an operating lease. The leases generally provide for a base rent plus real estate taxes and certain operating expenses related to the leases. The leases contain renewal options, escalating payments and leasehold allowances.

        The Company leases the Bedford facility under a long-term, non-cancellable sublease that is scheduled to expire in April 2017. The Company leases the Burlington facility under a long-term, non-cancellable lease that expires in October 2015. In June 2014, the Company entered into a termination agreement to terminate the Burlington facility lease as of July 31, 2015. Accordingly, all monetary obligations pursuant to the original lease are prorated through the termination date and deferred rent and depreciation of leasehold improvements expense was accelerated. The Wilmington facility is leased under a long-term, non-cancellable lease that is expected to commence in April 2015, and expire in March 2022. The Company also leases satellite facilities under short-term non-cancellable operating leases.

        The future minimum rental payments under the Company's non-cancellable operating leases as of March 31, 2015 (unaudited) are as follows (in thousands):

Year
  Minimum lease
Payments
 

2015 (remainder of year)

  $ 1,227  

2016

    1,641  

2017

    789  

2018

    364  

2019 - 2022

    1,253  

  $ 5,274  

        Rent expense of $1.5 million was charged to operations for the years ended December 31, 2013 and 2014, and $0.4 million for the three months ended March 31, 2014 and 2015. The Company's operating lease agreements contain scheduled rent increases, which are being amortized over the terms of the agreements using the straight-line method. Deferred rent was $0.8 million as of December 31, 2013, $0.5 million as of December 31, 2014 and $0.5 million as of March 31, 2015, and is included in liabilities.

License and revenue share agreements

Settlement and patent license

        In December 2014, the Company entered into a settlement and patent license agreement that grants ConforMIS a fully paid-up license to certain intellectual property and provides for the mutual release and absolute discharge of any and all claims in connection with the licensed patents and with suits filed by and against the parties to the agreement in exchange for $750,000 payable by the Company in two installments, wherein the first installment of $250,000 is payable in January of 2015 and the second installment of $500,000 is payable no later than December 1, 2015. The

F-20


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Company expensed the full amount of the consideration in 2014, included in general and administrative expense. The license continues until the expiration of the last patent.

Revenue share agreements

        The Company is party to revenue share agreements with certain past and present members of its scientific advisory board under which these advisors agreed to participate on its scientific advisory board and to assist with the development of the Company's customized implant products and related intellectual property. These agreements provide that the Company will pay the advisor a specified percentage of the Company's net revenues, ranging from 0.2% to 1.33%, with respect to the Company's products on which the advisor made a technical contribution or, in some cases, which the Company covered by a claim of one of its patents on which the advisor is a named inventor. The specific percentage is determined by reference to product classifications set forth in the agreement and is tiered based on the level of net revenues collected by the Company on such product sales. The Company's payment obligations under these agreements typically expire a fixed number of years after expiration or termination of the agreement, but in some cases expire on a product-by-product basis or expiration of the last to expire of the Company's patents where the advisor is a named inventor that claims the applicable product.

        Philipp Lang, M.D., the Company's Chief Executive Officer, joined the Company's scientific advisory board in 2004 prior to becoming an employee. The Company first entered into a revenue share agreement with Dr. Lang in 2008 when he became the Company's Chief Executive Officer. In 2011, the Company entered into an amended and restated revenue share agreement with Dr. Lang when he became the Company's Chief Executive Officer. Under this agreement, the specified percentage of the Company's net revenues payable to Dr. Lang ranges from 0.875% to 1.33% and applies to all of the Company's current and planned products, including the Company's iUni, iDuo, iTotal Cr, iTotal PS and iTotal Hip products, as well as certain other knee, hip and shoulder replacement products and related instrumentation the Company may develop in the future. The Company's payment obligations under this agreement expire on a product-by-product basis on the last to expire of the Company's patents on which Dr. Lang is named an inventor that claim the applicable product. These payment obligations survive termination of Dr. Lang's employment with the Company.

        The Company incurred aggregate revenue share expense, including all amounts payable under the Company's scientific advisory board and Chief Executive Officer revenue share agreements, of $1.4 million during the year ended December 31, 2013, representing 4.0% of revenue, $2.3 million during the year ended December 31, 2014, representing 4.0% of revenue, $0.6 million during the three months ended March 31, 2014, representing 5.2% of revenue, and $0.8 million during the three months ended March 31, 2015, representing 5.1% of revenue. See "Note K—Related Party Transactions" for further information regarding the Company's arrangement with its Chief Executive Officer.

Other obligations

        In the ordinary course of business, the Company is a party to certain non-cancellable contractual obligations typically related to research and development and marketing services. As of December 31, 2014, obligations under such agreements amounted to $1.2 million in the aggregate.

        As of March 31, 2015, obligations under such agreements amounted to $660,000 in the aggregate. The services are expected to be rendered through 2017.

F-21


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Legal proceedings

        In the ordinary course of conducting its business, the Company is subject to litigation, claims and administrative proceedings on a variety of matters. An estimate of the possible loss or range of loss as a result of any of these matters cannot be made; however, management does not believe that these matters, individually or in the aggregate, are material to its financial condition, results of operations or cash flows.

Indemnifications

        In the normal course of business, the Company enters into contracts and agreements that contain a variety of representations and warranties and provide for general indemnifications. The Company's exposure under these agreements is unknown because it involves claims that may be made against the Company in the future, but have not yet been made. To date, the Company has not paid any claims or been required to defend any action related to its indemnification obligations. However, the Company may record charges in the future as a result of these indemnification obligations. In accordance with its bylaws, the Company has indemnification obligations to its officers and directors for certain events or occurrences, subject to certain limits, while they are serving at the Company's request in such capacity. There have been no claims to date and the Company has a director and officer insurance policy that enables it to recover a portion of any amounts paid for future claims.

Note J—Debt and Notes Payable

        Summary of long-term debt as of December 31, 2013 and 2014, and March 31, 2015 is as follows (in thousands):

 
  December 31,    
 
 
  March 31,
2015
 
 
  2013   2014  
 
   
   
  (unaudited)
 

WTI Term Loan II

  $ 1,929   $   $  

Massachusetts Development Finance Agency

    1,215     760     692  

Oxford Finance, LLC

        6,250     6,250  

Silicon Valley Bank

        3,750     3,750  

    3,144     10,760     10,692  

Less total discount

   
(33

)
 
(140

)
 
(132

)

    3,111     10,620     10,560  

Less current installments

   
2,158
   
272
   
277
 

Long-term debt, excluding current installments

  $ 953   $ 10,348   $ 10,283  

F-22


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        The principal payments due under the debt agreements as of December 31, 2014 and March 31, 2015, assuming the $76 million revenue milestone under the SVB/Oxford Agreement is not satisfied (in thousands):

 
  Principal
Payment
 

2015 (remainder of year)

  $ 211  

2016

    548  

2017

    3,296  

2018

    3,347  

2019

    3,290  

Total

  $ 10,692  

SVB/Oxford

        On November 7, 2014, or the effective date, the Company and ImaTx entered into the SVB/Oxford Agreement consisting of a revolving line of credit of up to $5 million (subject to availability under the borrowing base and satisfaction of other funding conditions) (the "Revolving Line"), and commitments for two $10 million term loans, or the SVB/Oxford Term Loans. At the time the Company entered into the SVB/Oxford Agreement, it borrowed the first $10 million term loan, or the SVB/Oxford Term Loan A, and issued the lenders warrants to purchase 33,481 shares of the Company's common stock. The Company is eligible to borrow a second term loan in a principal amount of $10 million (the "SVB/Oxford Term Loan B"), on or prior to November 7, 2015, upon meeting certain conditions, including the Company being able to make certain agreed upon representations and warranties to the lenders and a determination by the lenders, in their sole discretion, that there has been no occurrence of any material adverse change, as defined in the SVB/Oxford Agreement, or any material deviation from the annual financial projections provided by the Company and accepted by the lenders. In the event that the Company borrows the additional $10 million term loan, the Company will be obligated to issue warrants to purchase an additional 33,481 shares of its common stock to the lenders under the SVB/Oxford Agreement.

        Unless earlier terminated by the Company or accelerated by the lenders, the Revolving Line terminates on November 7, 2019, with all outstanding borrowings and associated interest becoming due and payable upon such termination. The Company's ability to borrow under the Revolving Line is subject to a borrowing base, calculated as 85% (or such lower percent as Silicon Valley Bank may determine in accordance with the SVB/Oxford Agreement) of eligible accounts receivable. Borrowings under the Revolving Line bear interest at a floating per annum rate equal to the prime rate. Interest on the Revolving Line is payable monthly. In addition to interest, the Company is obligated to pay a $250,000 fee for the Revolving Line, which is payable in annual increments of $50,000 due on the effective date and each anniversary of the effective date. The Company will amortize this fee ratably over the term of the Revolving Line.

        Further, the Company is obligated to pay a termination fee of $100,000 if it elects to terminate the Revolving Line prior to the first anniversary of the effective date, or $50,000 if it elects to terminate the Revolving Line between the first and third anniversaries of the effective date, provided that no termination fee will be payable if the Revolving Line is replaced with a new facility or an amended and restated facility from Silicon Valley Bank.

        Unless earlier prepaid by the Company or accelerated by the lenders, the SVB/Oxford Term Loans will each mature on November 1, 2019 (the "Term Loan Maturity Date"). The SVB/Oxford

F-23


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Term Loan A bears interest at a fixed rate of 7.25% per annum, which rate was determined as the prime rate on the original date of funding plus 4%. To the extent the Company borrows the SVB/Oxford Term Loan B, such term loan will accrue interest at a fixed per annum rate equal to the prime rate on the date of funding, plus 4%. Interest on each of the SVB/Oxford Term Loans is payable monthly in arrears. If the Company achieves a revenue milestone of $76 million, measured on a trailing 12 month basis for the 12 months ending May 31, 2016, and no event of default has occurred, only interest, and no principal, will be payable for the first 36 months following the effective date. If the Company does not achieve the revenue milestone, only interest, and no principal, will be payable for the first 24 months following the effective date. After the interest only period, the Company is required to make equal monthly payments of principal and interest, in arrears, for the remaining term until maturity. In addition to interest, the Company is obligated to make a final payment fee equal to the original principal amount of the applicable SVB/Oxford Term Loan, multiplied by 7%, on the earliest to occur of the Term Loan Maturity Date, the acceleration of any term loan, or the prepayment of a term loan, which is expensed to interest over the term of the respective term loan using the effective interest method. Further, with respect to any term loan subject to prepayment prior to the Term Loan Maturity Date, whether by mandatory or voluntary prepayment or acceleration, the Company will be required to make a prepayment fee equal to 3% of the principal amount being prepaid, if such prepayment is made on or prior to the first anniversary of the funding date of the applicable term loan, 2% of the principal amount being prepaid, if such prepayment is made after the first anniversary but before the second anniversary of the funding date of the applicable term loan, or 1% of the principal amount being prepaid, if such prepayment is made after the second anniversary of the funding date of the applicable term loan.

        The Company's obligations under the SVB/Oxford Agreement are secured by a security interest over substantially all of the Company's and ImaTx's assets, other than intellectual property, with respect to which the Company and ImaTx granted a negative pledge. The SVB/Oxford Agreement contains negative covenants restricting its activities, including limitations on dispositions, mergers or acquisitions, incurring indebtedness or liens, paying dividends or making investments and certain other business transactions. There are no financial covenants associated with the SVB/Oxford Agreement. Obligations under the SVB/Oxford Agreement are subject to acceleration upon the occurrence of specified events of default, including a material adverse change in the business, operations or financial or other condition.

        Also, immediately upon the occurrence and during the continuance of an event of default, all obligations outstanding under the agreement shall accrue interest at a fixed rate equal to the per annum rate that is otherwise applicable thereto plus 5%.

        As of December 31, 2014 and March 31, 2015, the prime rate was 3.25% and no advances were outstanding from the fully available $5 million Revolving Line. Administrative and legal costs in connection with the SVB/Oxford Agreement were deemed immaterial and expensed as incurred.

        In connection with the SVB/Oxford Term Loan A, the Company issued warrants to purchase an aggregate of 33,481 shares of the Company's common stock at a price of $8.96 per share, which was the fair value of the Company's common stock. Based on the Company's assessment of the warrants relative to ASC 480, Distinguishing Liabilities fromEquity, the warrants are classified as equity and the Company recorded $134,000 fair value of the warrants as a discount to the term loan recorded to additional paid-in capital.

F-24


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        The value of the warrants is amortized to interest expense over the life of the SVB/Oxford Term Loan A. The Company used the Black-Scholes option pricing model to calculate the fair value of the warrants based on the following inputs and assumptions:

Risk-free interest rate

    1.6 %

Expected term (in years)

    5  

Dividend yield

    0 %

Expected volatility

    50 %

$15 million term loan—WTI Term Loan II

        In May 2014, the $15 million term loan and security agreement (the "WTI Term Loan II") entered into with WTI in February 2011 was paid-off as scheduled. The 39-month credit facility was secured by certain tangible assets of the Company and included a security interest in the Company's intellectual property. The borrowings under the WTI Term Loan II, which were drawn in tranches, incurred a fixed interest rate of 12.50% per annum. Following the interest only periods, interest and principal was payable in equal monthly installments. In 2011, the Company drew down two tranches of $5 million each and issued warrants to purchase $1,100,000 and $80,000 of Series D preferred stock. Based on the Company's assessment of the warrants relative to ASC 480, Distinguishing Liabilities from Equity, the warrants are classified as equity and the Company recorded $573,000 million and $76,000 fair value of the warrants as a discount to the term loan recorded to additional paid-in capital. The value of the warrants was amortized to interest expense over the life of the term loans, which was fully amortized when the loan was paid in full in 2014.

        Additionally, in July 2011, in connection with an amendment of the WTI Term Loan II to extend the termination dates of the second and third tranches, the Company issued a warrant to purchase $159,000 of Series D preferred stock or equivalent preferred stock. Based on the Company's assessment of the warrants relative to ASC 480, Distinguishing Liabilities from Equity, the warrants are classified as equity and the Company recorded $79,000 fair value of the warrants as a discount to the term loan to additional paid-in capital. The value of the warrants was amortized to interest expense over the remaining life of the term loan which was fully amortized when the loan was paid-off.

$1.4 million term loan—Massachusetts Development Finance Agency

        In June 2011, the Company entered into a $1.4 million term loan facility with Massachusetts Development Finance Agency ("MDFA") for the purposes of equipment purchases. The MDFA facility, which is subordinated to the SVB/Oxford Term Loans and any advances under the Revolving Line, are secured on a second-lien basis by certain tangible assets of the Company.

        At the time the Company entered into the MDFA facility, the Company borrowed the first tranche of $0.6 million, with the remaining funds to be borrowed over the following 18 months. To date, the Company has borrowed a total of $1.4 million of the available commitments under the facility, of which $692,000 in loans were outstanding as of March 31, 2015. Loans under the MDFA facility bear a fixed interest rate of 6.5% per annum. Interest is payable monthly in arrears. Beginning on January 1, 2013, the Company began making payments of principal and interest in 66 equal monthly installments.

        In connection with the MDFA facility, the Company issued warrants to MDFA to purchase 16,000 shares of Series D preferred stock. Based on the Company's assessment of the warrants relative to ASC 480, Distinguishing Liabilities from Equity, the warrants are classified as equity and

F-25


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

the Company recorded fair value of $46,000 as a discount to the term loan and was amortized to interest expense over the 84-month life of the term loan.

Note K—Related Party Transactions

Vertegen

        In April 2007, the Company entered into a license agreement with Vertegen, Inc., or Vertegen. Vertegen is an entity that is controlled by and affiliated with Dr. Lang, the Company's Chief Executive Officer. Under the agreement (the "Vertegen Agreement"), Vertegen granted the Company an exclusive, worldwide license under specified Vertegen patent rights and related technology to make, use and sell products and services in the fields of diagnosis and treatment of articular disorders and disorders of the human spine. The company may sublicense the rights licensed to it by Vertegen. The Company is required to use commercially reasonable efforts, at its sole expense, to prosecute the patent applications licensed to the Company by Vertegen.

        In connection with entering into the license agreement with Vertegen, the Company paid Vertegen an initial license fee of $10,000 and issued Vertegen a warrant to purchase 100,000 shares of its common stock at an exercise price of $1.10 per share, which has expired unexercised. The Company is required to pay Vertegen a 5% royalty on net sales of products covered by the patents licensed to us by Vertegen, the subject matter of which is directed primarily to spinal implants, as well as a 5% royalty on any proceeds from enforcing the patent rights licensed to the Company by Vertegen. The Company has not sold any products subject to this agreement and has paid no royalties under this agreement.

        The Vertegen Agreement may be terminated by the Company at any time by providing notice to Vertegen. In addition, Vertegen may terminate the Vertegen Agreement in its entirety if the Company is in material breach of the agreement, and the Company fails to cure such breach during a specified period.

Asia strategy

        In connection with the issuance and sale of the Company's Series E-1 and Series E-2 preferred stock, the Company entered into a letter agreement with an investor that provides that $5.0 million of the proceeds received by the Company from the investor for the sale of the Company's Series E-1 and Series E-2 preferred stock could only be used in connection with the marketing and sale of the Company's products in Asia and that a committee of the Company's board of directors should be formed for the purposes of directing and overseeing the investment of such proceeds.

        In July 2013, the Company agreed to exchange 381,875 shares of Series E-1 preferred stock held by the investor for 381,875 shares of the Company's Series E-2 preferred stock.

        Based on the restriction on the use of the proceeds received in connection with the letter agreement, the proceeds were classified as restricted cash. As of December 31, 2013, $4.6 million of the proceeds, as of December 31, 2014, $3.6 million of the proceeds and as of March 31, 2015, $3.5 million of the proceeds were included in restricted cash.

Revenue share agreement

        As described in Note I, the Company is a party to certain agreements with advisors to participate as a member of the Company's scientific advisory board. In September 2011, the Company entered into an amended and restated revenue share agreement with Philipp Lang, M.D., our Chief Executive Officer, which amended and restated a similar agreement entered into in 2008

F-26


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

when Dr. Lang stepped down as chair of the Company's scientific advisory board and became the Company's Chief Executive Officer. This agreement provides that the Company will pay Dr. Lang a specified percentage of our net revenues, ranging from 0.875% to 1.33%, with respect to all of our current and planned products, including the Company's iUni, iDuo, iTotal CR, iTotal PS and iTotal Hip products, as well as certain other knee, hip and shoulder replacement products and related instrumentation the Company may develop in the future. The specific percentage is determined by reference to product classifications set forth in the agreement and is tiered based on the level of net revenues collected by the Company on such product sales. The Company's payment obligations expire on a product-by-product basis on the last to expire of the Company's patents on which Dr. Lang is a named inventor that claim the applicable product. These payment obligations survive any termination of Dr. Lang's employment with the Company. The Company incurred revenue share expense paid to Dr. Lang of $0.4 million during the year ended December 31, 2013, $0.6 million during the year ended December 31, 2014, $0.1 million during the three months ended March 31, 2014, and $0.2 million during the three months ended March 31, 2015.

Note L—Stockholders' Equity

Common stock

        The Company's amended and restated certificate of incorporation in effect during 2013 and 2014, and the three months ended March 31, 2015 (the "Restated Certificate of Incorporation") authorizes the Company to issue 80,000,000 shares of $0.00001 par value common stock in the years ended December 31, 2013 and 2014, and in the three months ended March 31, 2015, respectively. Common stockholders are entitled to dividends as and when declared by the board of directors, subject to the rights of holders of all classes of stock outstanding having priority rights as to dividends. There have been no dividends declared to date. The holder of each share of common stock is entitled to one vote.

Preferred stock

        The Company's Restated Certificate of Incorporation authorizes the Company to issue 53,496,241 shares of $0.00001 par value preferred stock:

        At December 31, 2013, convertible preferred stock consisted of the following (in thousands, except share data):

Series
  Shares
Authorized
  Shares
Issued and
Outstanding
  Liquidation
Value
 

Series A convertible preferred

    3,410,278     3,410,278   $ 3,410  

Series B convertible preferred

    4,469,349     4,469,349     12,023  

Series C convertible preferred

    5,191,754     4,906,040     17,171  

Series D convertible preferred

    14,612,360     12,939,830     77,639  

Series E-1 convertible preferred

    15,149,375     11,827,030     94,616  

Series E-2 convertible preferred

    10,663,125     10,259,189     123,110  

    53,496,241     47,811,716   $ 327,969  

F-27


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        At December 31, 2014 and March 31, 2015 (unaudited), convertible preferred stock consisted of the following (in thousands, except share data):

Series
  Shares
Authorized
  Shares
Issued and
Outstanding
  Liquidation
Value
 

Series A convertible preferred

    3,410,278     3,410,278   $ 3,410  

Series B convertible preferred

    4,469,349     4,469,349     12,023  

Series C convertible preferred

    5,191,754     4,906,040     17,171  

Series D convertible preferred

    14,612,360     13,307,287     79,844  

Series E-1 convertible preferred

    15,149,375     14,633,509     117,068  

Series E-2 convertible preferred

    10,663,125     10,259,189     123,110  

    53,496,241     50,985,652   $ 352,626  

        Significant terms of the Company's preferred stock are as follows:

        Conversion.    Each share of preferred stock may be converted into the Company's common stock at the option of the holder on a two-to-one basis. Additionally, each share of preferred stock shall be automatically converted into common stock upon the earlier (1) closing of a firm commitment underwritten public offering from which the aggregate net proceeds equal or exceed $50.0 million and in which the price per share is at least $20.00, or the equivalent price after adjustment for certain events, (2) with respect to the Series A preferred stock, approval of the holders of a majority of the outstanding Series A preferred stock, (3) with respect to the Series B preferred stock, approval of the holders of a majority of the outstanding Series B preferred stock, (4) with respect to the Series C preferred stock, approval of the holders of a majority of the outstanding Series C preferred stock, (5) with respect to the Series D preferred stock, approval of the holders of a majority of the outstanding Series D preferred stock, (6) with respect to the Series E-1 preferred stock, approval of the holders of a majority of the outstanding Series E-1 preferred stock, and (7) with respect to the Series E-2 preferred stock, approval of the holders of a majority of the outstanding Series E-2 preferred stock.

        Antidilution Protection.    The rate at which shares of preferred stock may be converted into common stock shall be subject to adjustment for stock dividends, stock splits, reverse stock splits, and similar events. The rate shall also be subject to broad-based weighted average antidilution protection, subject to exclusions for: (1) the issuance of common stock as approved by the Board of Directors to directors, officers, employees, consultants, and advisors, (2) the issuance of the Company's capital stock (or rights therefor) in connection with acquisitions and mergers as approved by the Board of Directors, (3) the issuance of the Company's capital stock (or rights therefor) as approved by the Board of Directors in connection with equipment leasing, real estate, bank financing, or similar transactions, (4) the issuance of the Company's capital stock (or rights therefor) as approved by the Board of Directors to vendors, customers or strategic business partners, (5) common stock issued upon conversion of preferred stock, (6) the issuance of securities in an underwritten public offering pursuant to an effective registration statement, (7) the issuance of securities pursuant to currently outstanding warrants as of July 5, 2013, (8) issuances of securities approved by the holders of a majority of the outstanding Series E-1 preferred stock and outstanding Series E-2 preferred stock, voting together as a single class on an as-converted basis, and either unanimously approved by the Company's Board of Directors or the holders of outstanding shares of preferred stock, voting together as a single class on an as-converted basis, and (9) Series E-1 preferred stock or Series E-2 preferred stock issued or issuable at a purchase price equal to or greater than $8.00 per share.

F-28


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        Dividends.    The holders of preferred stock are entitled to receive non-cumulative and non-accruing dividends only when and if declared by the Board of Directors out of funds legally available for that purpose in an amount equal to: $0.10 per share of Series A preferred stock; $0.27 per share of Series B preferred stock; $0.35 per share of Series C preferred stock; $0.60 per share of Series D preferred stock; $0.80 per share of Series E-1 preferred stock; and $1.20 per share of Series E-2 preferred stock (in each case, subject to stock splits, subdivisions, combinations, consolidations and the like with respect to such shares). No dividends shall be declared on any series of preferred stock unless dividends are declared on all such preferred stock. After payments of dividends to the holders of preferred stock, dividends may be declared and distributed among all holders of common stock, provided that no dividend be declared or distributed among the holders of common stock at a greater rate than that at which dividends are paid to the holders of preferred stock (based on the number of shares of common stock into which such preferred stock is convertible on the date the dividend is declared).

        Voting rights.    The holders of preferred stock are entitled to the number of votes equal to the number of shares of common stock issuable upon conversion of the preferred stock held by such holder, and except as otherwise provided by law or the Restated Certificate of Incorporation, the holders of preferred stock and of common stock shall vote together on all matters.

        Protective provisions.    The votes of the holders of a majority of the outstanding shares of each series of preferred stock, voting as a separate class, will be required for the approval of certain events relating to (1) authorization or issuance of additional preferred stock having superior preferences or priorities as to dividends, redemption rights, liquidation preferences, conversion rights or voting rights of the given series of preferred stock, and (2) amendments, restatements, modifications or waivers to the Company's certificate of incorporation or bylaws in a manner that is materially adverse to the given series of preferred stock.

        Additionally, the votes of the holders of a majority of the outstanding shares of preferred stock, voting together as a single class, will be required for the approval of certain events relating to the liquidation, dissolution, or winding-up of the Company, certain redemptions or repurchases of the Company's common stock, and the disposition of the securities of any subsidiary (other than to the Company), any authorization, execution, amendment or termination of any material contract, agreement or other arrangement between the Company and any member of the Company's board of directors, any executive officer or any holder of 10% of the Company's outstanding capital stock, any increase in the number of shares of the Company's capital stock reserved under any equity incentive plan, and any change in the Company's principal business focus to a field of business other than medical devices.

        Redemption.    None of the preferred stock shall be redeemable.

        Liquidation, dissolution, or winding-up.    In the event of any liquidation or winding up of the Company, the holders of Series E-1 preferred stock, Series E-2 preferred stock and Series D preferred stock shall be entitled to receive, pari passu and in preference to the holders of the Company's Series C preferred stock, Series B preferred stock, Series A preferred stock and common stock, an amount equal to declared but unpaid dividends on each share of such preferred stock, plus $8.00 per share of Series E-1 preferred stock, $12.00 per share of Series E-2 preferred stock and $6.00 per share of Series D preferred stock. After such payments, the holders of Series C preferred stock shall be entitled to receive, in preference to the holders of Series B preferred stock, Series A preferred stock and common stock, an amount equal to declared but unpaid dividends on a share of Series C preferred stock plus $3.50 per share.

F-29


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        After such payments, the holders of Series B preferred stock shall be entitled to receive, in preference to the holders of Series A preferred stock and common stock, an amount equal to declared but unpaid dividends on a share of Series B preferred stock plus $2.69 per share. After such payments, the holders of Series A preferred stock shall be entitled to receive, in preference to the holders of common stock, an amount equal to declared but unpaid dividends on a share of Series A preferred stock plus $1.00 per share.

        After the payments set forth above, proceeds shall be shared pro rata by the holders of common stock, Series C preferred stock, Series B preferred stock and Series A preferred stock (on an as-converted basis) until such time as the holders of each such series of preferred stock shall have received a total distribution (including the initial preference) of two times their respective original purchase prices. All remaining proceeds thereafter shall be shared pro rata by the holders of common stock. A consolidation or merger of the Company or sale of all or substantially all of its assets or of a majority of its capital stock shall be deemed to be a liquidation or winding up for purposes of the liquidation preference.

        Right of first refusal.    For subsequent issuances of equity securities of the Company (excluding certain specified issuances), the Company has granted to certain investors holding at least 300,000 shares of preferred stock (or common stock issued upon conversion of preferred stock) and certain other investors (each a "Major Investor") the right to purchase up to their pro rata share of the new securities. Also, should any Major Investor choose not to purchase its full pro rata share, certain other Major Investors shall have the right to purchase a portion of the remaining shares.

Demand registration rights

        Beginning six months after the closing of an initial public offering, subject to specified limitations set forth in a registration rights agreement, at any time, the holders of at least 50% of the then outstanding registrable shares may at any time demand in writing that the Company register all or a portion of the registrable shares under the Securities Act for an offering of at least 40% of the then outstanding registrable shares or a lesser percentage of the then outstanding registrable shares provided that it is reasonably anticipated the aggregate offering price would exceed $20 million. The Company is not obligated to file a registration statement pursuant to these rights on more than two occasions.

        If, at any time after an initial public offering the Company proposes to file a registration statement to register any of its common stock under the Securities Act in connection with a public offering of such common stock, other than pursuant to certain specified registrations, the holders of registrable shares are entitled to notice of registration and, subject to specified exceptions, including market conditions, the Company will be required, upon the holder's request, to register their then held registrable shares.

Warrants

        The Company also issued warrants to certain investors and consultants to purchase shares of the Company's preferred stock and common stock. Based on the Company's assessment of the warrants granted in 2013 and 2014 relative to ASC 480, Distinguishing Liabilities from Equity, the warrants are classified as equity. No new warrants were issued in the three months ended March 31, 2015. According to ASC 480, an entity shall classify as a liability any financial instrument, other than an outstanding share, that, at inception, both a) embodies an obligation to repurchase the issuer's equity shares, or is indexed to such obligation and b) requires or may require the

F-30


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

issuer to settle the obligation by transferring assets. The warrants do not contain any provision that requires the Company to repurchase the shares and are not indexed to such an obligation. The warrants also do not require the Company to settle by transferring assets.

        All warrants were exercisable immediately upon issuance. Upon the conversion of the Company's preferred stock into common stock in connection with the Company's initial public offering, all warrants to purchase preferred stock instead become warrants to purchase the same number of shares of common stock.

        The fair value of warrants at date of grant was estimated using the Black-Scholes option pricing model, based on the following assumptions:

 
  Year Ended December 31,
 
  2013   2014

Risk-free interest rate

  0.36% - 0.57%   0.91% - 1.71%

Expected term (in years)

  2.50   2.50 - 5.00

Dividend yield

  0.00%   0.00%

Expected volatility

  55.00%   50.00% - 55.00%

Series C preferred stock warrants

        The Company has issued warrants to certain investors to purchase up to 594,774 shares of Series C preferred stock at an exercise price range of $0.01 to $3.50 per share of which warrants to purchase 285,714 shares are outstanding as of December 31, 2013 and 2014, and March 31, 2015.

        Summary of Series C preferred stock warrant activity is as follows:

 
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
  Fair
Value
 

Outstanding December 31, 2012

    285,714   $ 3.50     285,714   $ 3.50   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding December 31, 2013

    285,714   $ 3.50     285,714   $ 3.50   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding December 31, 2014

    285,714   $ 3.50     285,714   $ 3.50   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding March 31, 2015 (unaudited)

    285,714   $ 3.50     285,714   $ 3.50   $  

F-31


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Series D preferred stock warrants

        The Company has issued warrants to certain investors and consultants to purchase up to 1,672,529 shares of Series D preferred stock at an exercise price of $6.00 per share, of which warrants to purchase 1,637,529 shares of Series D preferred stock were outstanding at December 31, 2013, warrants to purchase 1,246,367 shares of Series D preferred stock were outstanding at December 31, 2014 and March 31, 2015. Upon the closing of an initial public offering, warrants to purchase 406,874 shares of Series D preferred stock at an exercise price of $6.00 per share will be automatically exchanged for 203,436 shares of common stock for no additional consideration.

        Summary of Series D preferred stock warrant activity is as follows:

 
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share(1)
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
  Fair
Value
 

Outstanding December 31, 2012

    1,672,529   $ 6.00     1,672,529   $ 6.00   $  

Granted

                     

Exercised

                     

Cancelled/expired

    (35,000 )   6.00     (35,000 )   6.00      

Outstanding December 31, 2013

    1,637,529   $ 6.00     1,637,529   $ 6.00   $  

Granted

                     

Exercised

    (367,455 )   6.00     (367,455 )   6.00      

Cancelled/expired

    (23,707 )   6.00     (23,707 )   6.00      

Outstanding December 31, 2014

    1,246,367   $ 6.00     1,246,367   $ 6.00   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding March 31, 2015 (unaudited)

    1,246,367   $ 6.00     1,246,367   $ 6.00   $  

(1)
This weighted average exercise price does not give effect to the automatic exchange of warrants to purchase 406,874 shares of Series D preferred stock for 203,436 shares of common stock for no additional consideration in the event of an initial public offering.

Series E-1 and E-2 preferred stock warrants

        The Company has issued warrants to certain equity investors and consultants to purchase up to 515,866 shares of Series E-1 preferred stock at an exercise price of $8.00 per share. As of December 31, 2013, warrants to purchase 300,929 shares of Series E-1 preferred stock were outstanding, and as of December 31, 2014 and March 31, 2015, warrants to purchase 515,866 shares of Series E-1 preferred stock were outstanding. The Company has issued warrants to certain investors and consultants to purchase up to 403,936 shares of Series E-2 preferred stock at an exercise price of $8.00 per share. As of December 31, 2013, warrants to purchase 247,686 shares of Series E-2 preferred stock were outstanding, and as of December 31, 2014 and March 31, 2015, warrants to purchase 403,936 shares of Series E-2 preferred stock were outstanding. Upon the

F-32


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

closing of an initial public offering, all warrants to purchase shares of Series E-1 or E-2 preferred stock will expire unless exercised.

        Summary of Series E-1 preferred stock warrant activity is as follows:

 
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
  Fair
Value
 

Outstanding December 31, 2012

    190,073   $ 8.00     190,073   $ 8.00   $  

Granted

    110,856     8.00     110,856     8.00     2.72  

Exercised

                     

Cancelled/expired

                     

Outstanding December 31, 2013

    300,929   $ 8.00     300,929   $ 8.00   $  

Granted

    214,937     8.00     214,937     8.00     3.68  

Exercised

                     

Cancelled/expired

                     

Outstanding December 31, 2014

    515,866   $ 8.00     515,866   $ 8.00   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding March 31, 2015 (unaudited)

    515,866   $ 8.00     515,866   $ 8.00   $  

        Summary of Series E-2 preferred stock warrant activity is as follows:

 
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
  Fair
Value
 

Outstanding December 31, 2012

    247,686   $ 8.00     247,686   $ 8.00   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding December 31, 2013

    247,686   $ 8.00     247,686   $ 8.00   $  

Granted

    156,250     8.00     156,250     8.00     3.88  

Exercised

                     

Cancelled/expired

                     

Outstanding December 31, 2014

    403,936   $ 8.00     403,936   $ 8.00   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding March 31, 2015 (unaudited)

    403,936   $ 8.00     403,936   $ 8.00   $  

F-33


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Common stock warrants

        The Company also issued warrants to certain investors and consultants to purchase 1,138,424 shares of common stock at an exercise price range of $0.02 to $9.00 per share of which warrants to purchase 170,832 shares are outstanding as of December 31, 2013, and warrants to purchase 204,312 shares are outstanding as of December 31, 2014 and March 31, 2015.

        Summary of common stock warrant activity is as follows:

 
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
  Fair
Value
 

Outstanding December 31, 2012

    270,831   $ 6.02     270,831   $ 6.02   $  

Granted

                     

Exercised

                     

Cancelled/expired

    (100,000 )   1.10     (100,000 )   1.10      

Outstanding December 31, 2013

    170,831   $ 8.88     170,831   $ 8.88   $  

Granted

    33,481     8.96     33,481     8.96     2.00  

Exercised

                     

Cancelled/expired

                     

Outstanding December 31, 2014

    204,312   $ 8.90     204,312   $ 8.90   $  

Granted

                     

Exercised

                     

Cancelled/expired

                     

Outstanding March 31, 2015 (unaudited)

    204,312   $ 8.90     204,312   $ 8.90   $  

        At December 31, 2013 and 2014 and March 31, 2015 (unaudited), the range of warrant prices per share for shares under warrants and the weighted average contractual life is as follows:

2013
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share
  Weighted
Average
Remaining
Contractual Life
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
 

Series C

    285,714   $ 3.50     3.54     285,714   $ 3.50  

Series D

    1,637,529   $ 6.00 (1)   1.11     1,637,529   $ 6.00  

Series E-1

    300,929   $ 8.00     5.95     300,929   $ 8.00  

Series E-2

    247,686   $ 8.00     5.71     247,686   $ 8.00  

Common Stock

    170,832   $ 8.88     1.93     170,832   $ 8.88  

 

2014
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share
  Weighted
Average
Remaining
Contractual Life
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
 

Series C

    285,714   $ 3.50     2.55     285,714   $ 3.50  

Series D

    1,246,367   $ 6.00 (1)   2.84     1,246,367   $ 6.00  

Series E-1

    515,866   $ 8.00     4.95     515,866   $ 8.00  

Series E-2

    403,936   $ 8.00     6.46     403,936   $ 8.00  

Common Stock

    204,312   $ 8.90     3.26     204,312   $ 8.90  

F-34


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements


2015
  Number of
Warrants
  Weighted
Average
Exercise Price
Per Share
  Weighted
Average
Remaining
Contractual Life
  Number of
Warrants
Exercisable
  Weighted
Average Price
Per Share
 
 
  (unaudited)
  (unaudited)
  (unaudited)
  (unaudited)
  (unaudited)
 

Series C

    285,714   $ 3.50     2.30     285,714   $ 3.50  

Series D

    1,246,367   $ 6.00 (1)   2.59     1,246,367   $ 6.00  

Series E-1

    515,866   $ 8.00     4.70     515,866   $ 8.00  

Series E-2

    403,936   $ 8.00     6.21     403,936   $ 8.00  

Common Stock

    204,312   $ 8.90     3.02     204,312   $ 8.90  

(1)
This weighted average exercise price does not give effect to the automatic exchange of warrants to purchase 406,874 shares of Series D preferred stock for 203,436 shares of common stock for no additional consideration in the event of an initial public offering.

Stock option plan

        In June 2004, the Company authorized the adoption of the 2004 Stock Option and Incentive Plan (the "2004 Plan"). Under the 2004 Plan, options were granted to persons who were, at the time of grant, employees, officers, or directors of, or consultants or advisors to, the Company. The 2004 Plan provided for the granting of non-statutory options, incentive options, stock bonuses, and rights to acquire restricted stock.

        The option price at the date of grant was determined by the Board of Directors and, in the case of incentive options, could not be less than the fair market value of the common stock at the date of grant, as determined by the Board of Directors. Options granted under the 2004 Plan generally vest over a period of four years and are set to expire 10 years from the date of grant. In February 2011, the Company terminated the 2004 Plan and all options outstanding under it were transferred to the 2011 Plan.

        In February 2011, the Company authorized the adoption of the 2011 Stock Option/Stock Issuance Plan (the "2011 Plan"). The 2011 Plan is divided into two separate equity programs, Option Grant and Stock Issuance. Per the 2011 Plan, options can be granted to persons who are, at the time, employees, officers, or directors of, or consultants or advisors to, the Company. The 2011 Plan provides for the granting of non-statutory options, incentive options and common stock. The price at the date of grant is determined by the Board of Directors and, in the case of incentive options and common stock, cannot be less than the fair market value of the common stock at the date of grant, as determined by the Board of Directors. Options granted under the 2011 Plan generally vest over a period of four years and expire 10 years from the date of grant.

        The Company has reserved 6,630,242 shares of common stock for issuance under the 2011 Plan including shares previously reserved for under the 2004 Plan, of which 260,726 are still available for grant as of March 31, 2015 (unaudited).

F-35


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        Activity under the 2011 Plan is as follows:

 
  Number of
Options
  Price
per Share
  Weighted
Average Exercise
Price per Share
 

Outstanding December 31, 2012

    4,775,979   $0.20 - 5.50   $ 3.44  

Granted

    869,540   5.50     5.50  

Exercised

    (258,909 ) 0.20 - 5.50     2.01  

Expired

    (276,349 ) 0.20 - 5.50     4.00  

Cancelled/Forfeited

    (240,931 ) 4.32 - 5.50     5.14  

Outstanding December 31, 2013

    4,869,330   $0.20 - 5.50   $ 3.77  

Granted

    1,037,547   8.96 - 10.96     9.77  

Exercised

    (118,738 ) 0.20 - 5.50     1.50  

Expired

    (142,206 ) 1.10 - 5.50     5.29  

Cancelled/Forfeited

    (290,366 ) 0.60 - 10.96     5.08  

Outstanding December 31, 2014

    5,355,567   $0.60 - 10.96   $ 4.87  

Granted

    346,836   8.96 - 10.96     10.96  

Exercised

    (28,174 ) 3.48 - 10.96     4.48  

Expired

    (15,228 ) 4.32 - 8.96     5.55  

Cancelled/Forfeited

    (9,827 ) 5.50 - 10.96     7.47  

Outstanding March 31, 2015 (unaudited)

    5,649,174   $0.60 - 10.98   $ 5.24  

Total vested and exercisable

    4,038,012            

        At December 31, 2013 and 2014, and March 31, 2015 (unaudited), the range of prices for stock options granted under stock option plan and the weighted average contractual life is as follows:

2013

 
  Number of
Options
  Weighted
Average
Exercise
Price Per
Share
  Weighted
Average
Remaining
Life
  Stock
Options
Exercisable
  Weighted
Average
Exercise
Price Per
Share
 

Range of Option Exercise Price

                               

$0.01 - $1.23

    1,316,788   $ 0.97     3.30     1,316,788   $ 0.97  

$1.24 - $3.49

    446,900     2.64     4.44     446,900     2.64  

$3.50 - $4.33

    900,426     4.32     6.54     842,251     4.32  

$4.34 - $5.51

    2,205,216     5.44     8.56     734,738     5.42  

    4,869,330   $ 3.77     6.42     3,340,677   $ 3.02  

F-36


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

2014

 
  Number of
Options
  Weighted
Average
Exercise
Price Per
Share
  Weighted
Average
Remaining
Life
  Stock
Options
Exercisable
  Weighted
Average
Exercise
Price Per
Share
 

Range of Option Exercise Price

                               

$0.01 - $1.23

    1,200,038   $ 1.02     2.47     1,200,038   $ 1.02  

$1.24 - $3.49

    424,210     2.63     3.64     424,210     2.63  

$3.50 - $4.33

    831,176     4.32     5.59     826,943     4.32  

$4.34 - $5.51

    1,882,816     5.44     7.42     1,161,919     5.40  

$5.55 - $8.97

    613,330     8.96     9.59     75,402     8.96  

$8.98 - $10.96

    403,997     10.96     9.60     61,284     10.96  

    5,355,567   $ 4.87     6.15     3,749,796   $ 3.61  

2015

 
  Number of
Options
  Weighted
Average
Exercise
Price Per
Share
  Weighted
Average
Remaining
Life (years)
  Stock
Options
Exercisable
  Weighted
Average
Exercise
Price Per
Share
 
 
  (unaudited)
  (unaudited)
  (unaudited)
  (unaudited)
  (unaudited)
 

Range of Option Exercise Price

                               

$0.01 - $1.23

    1,200,038   $ 1.02     2.23     1,200,038   $ 1.02  

$1.24 - $3.49

    416,710     2.62     3.46     416,710     2.62  

$3.50 - $4.33

    816,926     4.32     5.36     816,926     4.32  

$4.34 - $5.51

    1,856,431     5.44     7.21     1,277,378     5.41  

$5.55 - $8.97

    611,508     8.96     9.34     162,151     8.96  

$8.98 - $10.96

    747,561     10.96     9.55     164,809     10.96  

    5,649,174   $ 5.24     6.15     4,038,012   $ 3.96  

Stock-based compensation

        The Company uses the Black-Scholes option pricing model to determine the fair value of stock options. The determination of the fair value of stock-based payment awards on the date of grant using a pricing model is affected by the value of the Company's common stock as well as assumptions regarding a number of complex and subjective variables. The valuation of the Company's common stock is performed with the assistance of an independent third-party valuation firm using a methodology that includes various inputs including the Company's historical and projected financial results, peer company public data and market metrics, such as risk-free interest and discount rates. As the valuation includes unobservable inputs that are primarily based on the Company's own assumptions, the inputs are considered level 3 inputs within the fair value hierarchy.

        The weighted average fair value of options granted was $2.89 per share for the year ended December 31, 2013, $4.40 per share for the year ended December 31, 2014 and $4.83 per share for the three months ended March 31, 2015.

F-37


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        The fair value of options at date of grant was estimated using the Black-Scholes option pricing model, based on the following assumptions:

 
  Years Ended December 31,   Three Months Ended March 31,
 
  2013   2014   2014   2015
 
   
   
  (unaudited)
  (unaudited)

Risk-free interest rate

  0.78% - 1.61%   1.66% - 2.29%   N/A   1.37% - 1.67%

Expected term (in years)

  5.00 - 6.25   5.00 - 7.25   N/A   5.47 - 6.45

Dividend yield

  0.00%   0.00%   N/A   0.00%

Expected volatility

  55.00%   50.00%   N/A   50.00%

        Risk-free interest rate.    The risk-free interest rate is based on U.S. Treasury zero-coupon issues with remaining terms similar to the expected term on the options.

        Expected term.    The expected term of stock options represents the period the stock options are expected to remain outstanding and is based on the "SEC Shortcut Approach" as defined in "Share-Based Payment" (SAB 107) ASC 718-10-S99, "Compensation—Stock Compensation—Overall—SEC Materials", which is the midpoint between the vesting date and the end of the contractual term. With certain stock option grants, the exercise price may exceed the fair value of the common stock. In these instances, the Company adjusts the expected term accordingly.

        Dividend yield.    The Company has never declared or paid any cash dividends and does not plan to pay cash dividends in the foreseeable future, and, therefore, used an expected dividend yield of zero in the valuation model.

        Expected volatility.    Expected volatility measures the amount that a stock price has fluctuated or is expected to fluctuate during a period. The Company does not have a history of market prices of its common stock as it is not a public company. Therefore, the Company estimates volatility in accordance with Securities and Exchange Commission's Staff Accounting Bulletin No. 107, SAB 107, using historical volatilities of similar public entities.

        Forfeitures.    The Company uses historical data to estimate pre-vesting option forfeitures and record stock-based compensation expense only for those awards that are expected to vest. If the Company's actual forfeiture rate is materially different from its estimate, the stock-based compensation expense could be significantly different from what the Company has recorded in the current period.

        Employee stock-based compensation expense recognized was $2.3 million for the year ended December 31, 2013, $2.5 million for the year ended December 31, 2014, $0.5 million for the three months ended March 31, 2014 and $1.1 million for the three months ended March 31, 2015, and was calculated based on awards ultimately expected to vest. To date, the amount of stock-based compensation capitalized as part of inventory was not material.

F-38


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        The following is a summary of stock-based compensation expense (in thousands):

 
  Years Ended December 31,   Three Months Ended
March 31,
 
 
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Cost of revenues

  $ 179   $ 162   $ 41   $ 110  

Sales and marketing

    439     597     113     210  

Research and development

    879     628     98     254  

General and administrative

    840     1,163     213     514  

  $ 2,337   $ 2,550   $ 465   $ 1,088  

        At March 31, 2015, the Company had $5.8 million of total unrecognized compensation expense that will be recognized over a weighted average period of 2.56 years.

Note M—Income Taxes

        The Company files U.S. federal and state tax returns as well as foreign income tax returns. The Company has accumulated significant losses since its inception in 2004.

        For financial reporting purposes, income (loss) before income taxes for the years ended December 31, 2013 and 2014 include the following components (in thousands):

 
  Years Ended
December 31,
 
 
  2013   2014  

Income (loss) from continuing operations before income taxes:

             

U.S. 

  $ (44,104 ) $ (40,328 )

Non-U.S. 

    (3,756 )   (5,353 )

  $ (47,860 ) $ (45,681 )

F-39


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        Significant components of the provision for income taxes for the years ended December 31, 2013 and 2014 are as follows (in thousands):

 
  Years Ended
December 31,
 
 
  2013   2014  

Current:

             

Federal

  $   $  

State

         

Foreign

    29     41  

    29     41  

Deferred:

             

Federal

         

State

         

Foreign

         

         

Total

  $ 29   $ 41  

        The Company accounts for income taxes under FASB ASC 740-10 Accounting for Income Taxes. Deferred tax assets and liabilities are determined based upon differences between financial reporting and tax bases of assets and liabilities and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse.

        A reconciliation of the income tax expense (benefit) at the statutory federal income tax rate as reflected in the financial statements is as follows:

 
  Years Ended
December 31,
 
 
  2013   2014  

Tax at U.S. statutory rate

    (34.00 )%   (34.00 )%

State taxes, net of federal benefits

    (2.32 )   (2.36 )

Tax credit

    (0.05 )   (8.59 )

Change in valuation allowance

    31.24     37.46  

Rate change

    0.17     (0.02 )

Other

    5.03     7.58  

    0.07 %   0.10 %

        Deferred income taxes reflect the net tax effects of temporary differences between the carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes.

F-40


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        Significant components of the Company's deferred tax assets (liabilities) consist of the following (in thousands):

 
  Years Ended
December 31,
 
 
  2013   2014  

Deferred tax assets:

             

Federal and state net operating loss carryforwards

  $ 71,101   $ 83,339  

Foreign net operating loss carryforwards

    2,621     2,758  

Accrued expenses

        183  

Credits

    67,631     3,995  

Other

    2,778     3,272  

Total deferred tax assets

    76,568     93,547  

Valuation Allowance

    (75,696 )   (92,789 )

Net deferred tax assets

    872     758  

Deferred tax liabilities:

             

Fixed Assets

    (442 )   (350 )

Intangibles

    (430 )   (359 )

Other

        (49 )

Net deferred tax liabilities

    (872 )   (758 )

Net Deferred Tax Assets

  $   $  

Current net deferred tax asset

    17     13  

Long-term net deferred tax liability

    (17 )   (13 )

Net deferred tax asset

  $   $  

        A valuation allowance is required to reduce the deferred tax assets reported if, based on weight of evidence, it is more likely than not that some portion or all of the deferred tax assets will not be realized. After consideration of all of the evidence, both positive and negative, the Company has determined that a $92.8 million valuation allowance at December 31, 2014 is necessary to reduce the deferred tax assets to the amount that will more likely than not be realized. The change in the valuation allowance for the current year is $17.1 million.

        The Company provided a valuation allowance for the full amount of its net deferred tax asset for all periods because realization of any future tax benefit cannot be sufficiently assured as the Company does not expect income in the near term.

        At December 31, 2014, the Company had approximately $229.0 million of federal net operating loss carryforwards and approximately $117.0 million of state net operating loss carryforwards that if not utilized, will begin to expire in 2020 for federal tax purposes and began to expire in various years for different state tax purposes starting in 2011. The utilization of such net operating loss carryforwards and realization of tax benefits in future years depends predominantly upon having taxable income.

        Utilization of the NOL may be subject to a substantial annual limitation due to ownership change limitations that have occurred or that could occur in the future, as required by Section 382 and Section 383 of the Code. These ownership changes may limit the amount of NOL that can be utilized annually to offset future taxable income and tax, respectively.

F-41


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

        In general, an "ownership change" as defined by Section 382 of the Code results from a transaction or series of transactions over a three-year period resulting in an ownership change of more than 50 percentage points of the outstanding stock of a company by certain stockholders. The Company has completed a study to assess whether an ownership change has occurred or whether there have been multiple ownership changes since its formation. The results of this study indicated that the Company experienced ownership changes as defined by Section 382 of the Code. The Company has not identified NOLs that, as a result of these restrictions, will expire unused.

        The Company also has foreign net operating losses of approximately $17.0 million and approximately $1.0 million as of December 31, 2014, which may be available to offset future income recognized in the Federal Republic of Germany and the United Kingdom, respectively.

        The Company has adopted the accounting guidance related to uncertainty in income taxes. The total liability for unrecognized income tax benefits was approximately $1.1 million as of December 31, 2013 and $2.5 million as of December 31, 2014. The Company recognizes interest accrued and penalties, if applicable, related to unrecognized tax benefits in income tax expense. The Company does not expect any significant changes in the next 12 months.

        As of December 31, 2013 and 2014, the Company is open to examination in the U.S. federal and certain state jurisdictions for all of the Company's tax years since the net operating losses may potentially be utilized in future years to reduce taxable income. The Company is open to examination for tax years 2007 through 2013 in Germany and tax year 2013 in the UK due to net operating losses potentially utilized to offset future taxable income.

Note N—Segment and Geographic Data

        The Company operates as one reportable segment as described in Note B to the Consolidated Financial Statements. The countries in which the Company has local revenue generating operations have been combined into the following geographic areas: the United States (including Puerto Rico), and the rest of the word, which consists of Europe predominately (including Germany, Switzerland and the United Kingdom) and other foreign countries. Sales are attributable to a geographic area based upon the customer's country of domicile. Net property, plant and equipment are based upon physical location of the assets.

        Geographic information consists of the follows (in thousands):

 
  Years Ended December 31,   Three Months Ended
March 31,
 
 
  2013   2014   2014   2015  
 
   
   
  (unaudited)
  (unaudited)
 

Revenue

                         

United States

  $ 24,681   $ 34,332   $ 6,952   $ 10,313  

Rest of World

    9,916     13,854     3,847     4,387  

  $ 34,597   $ 48,186   $ 10,799   $ 14,700  

F-42


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements


 
  December 31,    
 
 
  March 31,
2015
 
 
  2013   2014  
 
   
   
  (unaudited)
 

Property and equipment, net

                   

United States

  $ 7,791   $ 8,540   $ 9,479  

Rest of World

    166     156     147  

  $ 7,957   $ 8,696   $ 9,626  

Note O—Subsequent Events

        The Company evaluated the December 31, 2014 consolidated financial statements for subsequent events through March 20, 2015, the date the audited financial statements were available to be issued, and determined that no additional subsequent events had occurred that would require recognition in these consolidated financial statements.

Note P—Subsequent Events—Interim (unaudited)

        For the purposes of the unaudited interim financial statements, the Company has completed an evaluation of all subsequent events through April 24, 2015, the date these consolidated financial statements were available to be issued. Additionally, in connection with the reissuance of the unaudited interim financial statements, the Company has re-evaluated subsequent events through June 18, 2015. The Company has concluded that no subsequent event has occurred that requires disclosure, except as noted below:

        In June 2015, in connection with the election to the Company's board of directors, the Company approved a grant to Mr. Meelia under the 2015 Plan, effective as of and contingent upon the effectiveness of the registration statement, of a number of shares of restricted stock equal to $220,000 divided by the per share price at which shares of our common stock are sold by the underwriters to the public in the IPO. The shares will vest with respect to 100% of the shares on the second anniversary of the grant date, and such vesting will accelerate in full upon a change of control.

        In May 2015, the Company amended the Vertegen license agreement increasing the royalty rate the Company will be required to pay from 5% to 6% on each of net sales of products covered by the patents licensed to the Company by Vertegen, the subject matter of which is directed primarily to spinal implants, and any proceeds from the Company enforcing the patent rights licensed to the Company by Vertegen. Such 6% royalty rate will be reduced to 3% in the United States during the five-year period following the expiration of the last-to-expire applicable patent in the United States and in the rest of the world during the five-year period following the expiration of the last-to-expire patent anywhere in the world.

        In April 2015, the Company entered into a fully paid up, worldwide license agreement with Wright Medical Group, Inc., or Wright Group, and its wholly owned subsidiary Wright Medical Technology, Inc., or Wright Technology and collectively with Wright Group, Wright Medical. Under the terms of this license agreement, the Company granted a perpetual, irrevocable, non-exclusive license to Wright Medical to use patient specific instrument technology covered by the Company's patents and patent applications with off-the-shelf implants in the foot and ankle. This license does not extend to patient-specific implants. This license agreement provided for a single lump-sum payment by Wright Medical to the Company of mid-single digit millions of dollars upon entering into

F-43


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

the license agreement, which has been paid. This license agreement will expire upon the expiration of the last to expire of the Company's patents and patent applications licensed to Wright Medical, which currently is expected to occur in 2030.

        In April 2015, the Company entered into a worldwide license agreement with MicroPort Orthopedics Inc., or MicroPort, a wholly owned subsidiary of MicroPort Scientific Corporation. Under the terms of this license agreement, the Company granted a perpetual, irrevocable, non-exclusive license to MicroPort to use patient specific instrument technology covered by the Company's patents and patent applications with off-the-shelf implants in the knee. This license does not extend to patient-specific implants. This license agreement provides for the payment to the Company of a fixed royalty at a high single to low double digit percentage of net sales on patient-specific instruments and associated implant components in the knee, including MicroPort's Prophecy patient specific instruments used with its Advance and Evolution implant components. This license agreement also provided for a single lump-sum payment by MicroPort to the Company of low-single digit millions of dollars upon entering into the license agreement, which has been paid. This license agreement will expire upon the expiration of the last to expire of the Company's patents and patent applications licensed to MicroPort, which currently is expected to occur in 2029.

        The Company has accounted for the settlement with Wright Medical and MicroPort under ASC 605-25, Multiple-Element Arrangements and Staff Accounting Bulletin No. 104, Revenue Recognition (ASC 605). In accordance with ASC 605, the Company is required to identify and account for each of the separate units of accounting. The Company identified the relative selling price for each and then allocated the total consideration based on their relative values. In connection with these agreements, in April 2015, the Company recognized in aggregate (i) back-owed royalties of $3.4 million as royalty revenue and (ii) the value attributable to the settlements of $0.2 million as other income. Additionally, the Company recognized $5.2 million in aggregate as deferred royalty revenue, of which $5.0 million and $0.2 million will be recognized as royalty revenue ratably through 2031 and 2029, respectively.

Registration rights agreement

        In May 2015, the Company's Board of Directors authorized the Company to enter into an Amended and Restated Information and Registration Rights Agreement by and among the Company and certain of its stockholders, including certain related persons, (the "Registration Rights Agreement"). In June 2015, the requisite stockholders that are parties to the agreement executed the Registration Rights Agreement. A description of the Registration Rights Agreement is set forth below.

        Beginning six months after the closing of an initial public offering, subject to specified limitations set forth in the Registration Rights Agreement, the holders of at least 25% of the then outstanding registrable shares may at any time demand in writing that the Company register all or a portion of the registrable shares under the Securities Act on a Form other than Form S-3 for an offering of at least 20% of the then outstanding registrable shares or a lesser percent of the then outstanding registrable shares provided that it is reasonably anticipated the aggregate offering price, net of selling expenses, would exceed $20 million. The Company is not obligated to file a registration statement pursuant to this provision on more than two occasions.

        In addition, after such time as the Company is eligible to use Form S-3, subject to specified limitations set forth in the Registration Rights Agreement, the holders of at least 25% of the then outstanding registrable shares may at any time demand in writing that the Company register all or a

F-44


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

portion of the registrable shares under the Securities Act on Form S-3 for an offering of at least 25% of the then outstanding registrable shares having an anticipated aggregate offering price to the public, net of selling expenses, of at least $5 million (a "Resale Registration Statement"). The Company is not obligated to effect a registration pursuant to a Resale Registration Statement on more than one occasion.

Sponsor Designee Recommendation Agreement

        In May 2015, the Company entered into a Sponsor Designee Recommendation Agreement with Procific ("the Procific Agreement") which will become effective upon the closing of the IPO. The Procific Agreement provides that, in the event that Colm Lanigan should cease to serve as a member of the Company's board of directors prior to the expiration of his term upon the commencement of the Company's 2017 annual meeting of stockholders, prior to filling such vacancy, Procific will have the opportunity to recommend to the Company's nominating and corporate governance committee an individual to fill such vacancy and to serve for the balance of Mr. Lanigan's incompleted term. Procific will no longer have rights under the Procific Agreement at such time as Procific and its affiliates no longer beneficially own at least 5% of the outstanding shares of the Company's common stock. In addition, the Procific Agreement will terminate upon the earlier to occur of (a) a change of control, as defined in the Procific Agreement, (b) Procific's delivery of written notice to the Company requesting termination and (c) the commencement of the Company's 2017 annual meeting of stockholders.

2015 annual cash bonus and equity grant plan

        In May 2015, the Company's board of directors adopted an annual cash bonus and equity grant plan for 2015. Pursuant to such plan, each of the Company's executive officers is eligible to receive an annual cash bonus, which is based on the achievement of individual and corporate performance objectives, calculated as a percentage of the executive's annual base salary, and which will be determined by the compensation committee of the Company's board of directors, in its sole discretion. The target annual cash bonus for 2015, as a percentage of annual base salary, is as follows: Dr. Lang: 55%; Mr. Weiner: 40%; Dr. Steines: 40%; Mr. Cerveny: 40%; Mr. Law: 35%; and Mr. Scott: 35%. In addition, each of these executives is eligible to receive an annual equity grant, which is based on the achievement of individual and corporate performance objectives, and which will be determined by the compensation committee of the Company's board of directors, in its sole discretion. The target annual equity grant for 2015, by value as determined using the Black-Scholes pricing model in the case of stock options, for each of the executive officers is as follows: Dr. Lang: $350,000; Mr. Weiner: $250,000; Dr. Steines: $250,000; Mr. Cerveny: $250,000; Mr. Law: $150,000; and Mr. Scott: $150,000.

Note Q—2015 Reverse Stock Split

        On June 10, 2015, the Company's Board of Directors approved a one-for-two reverse stock split of its common stock. The reverse stock split became effective upon filing of a certificate of amendment to the Company's amended and restated certificate of incorporation on June 16, 2015. Upon the effectiveness of the reverse stock split, (i) every two shares of outstanding common stock were reclassified and combined into one share of common stock, (ii) the number of shares of common stock for which each outstanding option and warrant to purchase common stock is exercisable was proportionately decreased and the exercise price of each outstanding option and warrant to purchase common stock was proportionately increased and (iii) the conversion rate at

F-45


Table of Contents


CONFORMIS, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

which each share of the Company's convertible preferred stock is convertible into common stock was proportionately decreased in connection with the one-for-two reverse stock split. No fractional shares were issued as a result of the reverse stock split. The total number of authorized shares of common stock and the par value per share of common stock did not change as a result of the reverse stock split. Accordingly, all share and per share amounts for all periods presented in these financial statements and notes thereto have been adjusted retroactively, where applicable, to reflect the reverse stock split and adjustment of the preferred share conversion ratios and exercise price of each outstanding option and warrant as if the transaction had occurred as of the beginning of the earliest period presented.

F-46


Table of Contents

LOGO


Table of Contents


PART II

INFORMATION NOT REQUIRED IN PROSPECTUS

ITEM 13.    OTHER EXPENSES OF ISSUANCE AND DISTRIBUTION.

        The following table indicates the expenses to be incurred in connection with this offering described in this Registration Statement, other than underwriting discounts and commissions, all of which will be paid by us. All amounts are estimated except the Securities and Exchange Commission registration fee and the FINRA filing fee.

 
  Amount  

Securities and Exchange Commission registration fee

  $ 19,243  

FINRA filing fee

    20,750  

NASDAQ Global Market listing fee

    125,000  

Accountants' fees and expenses

    320,000  

Legal fees and expenses

    3,500,000  

Transfer agent's fees and expenses

    3,500  

Printing and engraving expenses

    200,500  

Miscellaneous

    111,007  

Total Expenses

  $ 4,300,000  

ITEM 14.    INDEMNIFICATION OF DIRECTORS AND OFFICERS.

        Section 102 of the Delaware General Corporation Law permits a corporation to eliminate the personal liability of directors of a corporation to the corporation or its stockholders for monetary damages for a breach of fiduciary duty as a director, except where the director breached his duty of loyalty, failed to act in good faith, engaged in intentional misconduct or knowingly violated a law, authorized the payment of a dividend or approved a stock repurchase in violation of Delaware corporate law or obtained an improper personal benefit. Upon the completion of this offering, our restated certificate of incorporation will provide that none of our directors shall be personally liable to us or our stockholders for monetary damages for any breach of fiduciary duty as director, notwithstanding any provision of law imposing such liability, except to the extent that the Delaware General Corporation Law prohibits the elimination or limitation of liability of directors for breaches of fiduciary duty.

        Section 145 of the Delaware General Corporation Law provides that a corporation has the power to indemnify a director, officer, employee or agent of the corporation and certain other persons serving at the request of the corporation in related capacities against expenses (including attorneys' fees), judgments, fines and amounts paid in settlements actually and reasonably incurred by the person in connection with an action, suit or proceeding to which he or she is or is threatened to be made a party by reason of such position, if such person acted in good faith and in a manner he reasonably believed to be in or not opposed to the best interests of the corporation and, in any criminal action or proceeding, had no reasonable cause to believe his or her conduct was unlawful, except that, in the case of actions brought by or in the right of the corporation, no indemnification shall be made with respect to any claim, issue or matter as to which such person shall have been adjudged to be liable to the corporation unless and only to the extent that the Court of Chancery or other adjudicating court determines that, despite the adjudication of liability but in view of all of the circumstances of the case, such person is fairly and reasonably entitled to indemnity for such expenses which the Court of Chancery or such other court shall deem proper.

        Upon the completion of this offering, our restated certificate of incorporation will provide that we will indemnify each person who was or is a party or threatened to be made a party to or is

II-1


Table of Contents

involved in any threatened, pending or completed action, suit or proceeding by reason of the fact that he or she is or was a director or officer of ConforMIS, Inc., or is or was serving at our request as a director or officer of another corporation, partnership, joint venture, trust or other enterprise to the fullest extent permitted by the Delaware General Corporation Law. Upon the completion of this offering, our restated certificate of incorporation will provide that expenses must be advanced to these indemnitees under certain circumstances.

        The indemnification provisions contained in our restated certificate of incorporation that will be effective as of the closing date of this offering are not exclusive. In addition, we have entered into indemnification agreements with each of our directors and officers. These indemnification agreements may require us, among other things, to indemnify our directors and executive officers for some expenses, including attorneys' fees, judgments, fines and settlement amounts incurred by a director or officer in any action or proceeding arising out of his or her service as one of our directors or officers, or any of our subsidiaries or any other company or enterprise to which the person provides services at our request.

        In addition, we maintain standard policies of insurance under which coverage is provided to our directors and officers against losses arising from claims made by reason of breach of duty or other wrongful act, and to us with respect to payments which may be made by us to such directors and officers pursuant to the above indemnification provisions or otherwise as a matter of law. In any underwriting agreement we enter into in connection with the sale of common stock being registered hereby, the underwriters will agree to indemnify, under certain conditions, us, our directors, our officers and persons who control us within the meaning of the Securities Act of 1933, as amended, or the Securities Act, against certain liabilities.

ITEM 15.    RECENT SALES OF UNREGISTERED SECURITIES.

        Set forth below is information regarding shares of common stock and preferred stock issued, and options and warrants granted, by us within the past three years that were not registered under the Securities Act. Included is the consideration, if any, we received for such shares, options and warrants and information relating to the section of the Securities Act, or rule of the Securities and Exchange Commission, under which exemption from registration was claimed.

(a)
Issuance of capital stock

        From June 2011 through August 2014, we sold an aggregate of 14,633,509 shares of our Series E-1 preferred stock in a private placement to certain of our existing holders of preferred stock and additional accredited investors at a purchase price of $8.00 per share for an aggregate purchase price of $117.1 million. The sale of Series E-1 preferred stock was structured in multiple tranches and with multiple closing dates.

        From October 2011 through July 2013, we sold an aggregate of 9,586,237 shares of our Series E-2 preferred stock in a private placement to certain of our existing holders of preferred stock and additional accredited investors at a purchase price of $8.00 per share for an aggregate purchase price of $76.7 million. The sale of Series E-2 preferred stock was structured in multiple tranches and with multiple closing dates.

        On December 2012, we issued an aggregate of 672,952 shares of our Series E-2 preferred stock, 687,134 shares of our Series D preferred stock and 261,765 shares of our common stock upon the conversion of a convertible promissory note in the original aggregate principal amount of $10.0 million and approximately $2.5 million in accrued interest.

        On May 4, 2015, we issued an aggregate of 9,374 shares of our Series D preferred stock to a non-U.S. person (as that term is defined in Regulation S of the Securities Act) in connection with

II-2


Table of Contents

the exercise of a warrant held by such person at a purchase price per share of $6.00 for an aggregate purchase price of $56,244.

        No underwriters were involved in the foregoing issuances and sales of securities. The securities described in this section (a) of Item 15 were issued to investors in reliance upon the exemption from the registration requirements of the Securities Act, as set forth in Section 4(a)(2) under the Securities Act and Regulation D or Regulation S promulgated thereunder relative to transactions by an issuer not involving any public offering, to the extent an exemption from such registration was required. All purchasers of shares of preferred stock described above represented to us in connection with their purchase that they were accredited investors and were acquiring the shares for their own account for investment purposes only and not with a view to, or for sale in connection with, any distribution thereof and that they could bear the risks of the investment and could hold the securities for an indefinite period of time. The purchasers received written disclosures that the securities had not been registered under the Securities Act and that any resale must be made pursuant to a registration statement or an available exemption from such registration.

(b)
Stock option grants and issuances

        Between January 1, 2012 and May 31, 2015, we granted options to purchase an aggregate of 3,281,754 shares of common stock, with exercise prices ranging from $5.50 to $15.26 per share, to employees, directors and consultants pursuant to our 2011 Plan. Between January 1, 2012 and May 31, 2015, we issued an aggregate of 520,935 shares of common stock upon the exercise of options for aggregate consideration of $1.12 million.

        Between January 1, 2012 and May 31, 2015, we granted 81,250 shares of common stock to employees, directors and consultants pursuant to our 2011 Plan in consideration of services rendered to us.

        The stock options, the shares of common stock issuable upon the exercise of such options and the shares of our common stock as described in this section (b) of Item 15 were issued pursuant to written compensatory plans or arrangements with our employees, directors and consultants, in reliance on the exemption from the registration requirements of the Securities Act provided by Rule 701 promulgated under the Securities Act or pursuant to Section 4(a)(2) under the Securities Act, relative to transactions by an issuer not involving any public offering, to the extent an exemption from such registration was required. All recipients either received adequate information about us or had access, through employment or other relationships, to such information.

(c)
Warrant grants

        Between January 1, 2012 and March 23, 2014, we issued warrants to purchase an aggregate of 512,742 shares of Series E-1 preferred stock at a price of $8.00 per share to certain non-U.S. persons (as that term is defined in Regulation S of the Securities Act).

        Between January 1, 2012 and March 23, 2014, we issued warrants to purchase an aggregate of 403,936 shares of Series E-2 preferred stock at a price of $8.00 per share to certain non-U.S. persons (as that term is defined in Regulation S of the Securities Act).

        On January 30, 2012, we issued a warrant to purchase an aggregate of 4,166 shares of Series D preferred stock at a price of $6.00 per share to a non-U.S. person (as that term is defined in Regulation S of the Securities Act). The securities described in this section (c) of Item 15 were issued in reliance upon the exemption from the registration requirements of Regulation S promulgated under the Securities Act or the Securities Act, as set forth in Section 4(a)(2) under the Securities Act promulgated thereunder relative to transactions by an issuer not involving any public offering, to the extent an exemption from such registration was required.

II-3


Table of Contents

        All of the securities described in paragraphs (a), (b) and (c) of this Item 15 are deemed restricted securities for purposes of the Securities Act. All of the certificates representing such securities included appropriate legends setting forth that the securities have not been registered and the applicable restrictions on transfer.

ITEM 16.    EXHIBITS AND FINANCIAL STATEMENT SCHEDULES.

        The exhibits to the registration statement are listed in the Exhibit Index attached hereto and incorporated by reference herein.

ITEM 17.    UNDERTAKINGS.

II-4


Table of Contents

II-5


Table of Contents


SIGNATURES

        Pursuant to the requirements of the Securities Act, the registrant has duly caused this Amendment No. 2 to the registration statement to be signed on its behalf by the undersigned, thereunto duly authorized, in the Town of Bedford, Commonwealth of Massachusetts, on the 18th day of June, 2015.


 

 

CONFORMIS, INC.

 

 

By:

 

/s/ PHILIPP LANG  
       
Philipp Lang, M.D.
President and Chief Executive Officer

        Pursuant to the requirements of the Securities Act, this Amendment No. 2 to the registration statement has been signed by the following persons in the capacities and on the dates indicated.

Signature
 
Title
 
Date

 

 

 

 

 
/s/ PHILIPP LANG

Philipp Lang, M.D.
  President and Chief Executive Officer (Principal Executive Officer) and Director   June 18, 2015

/s/ PAUL WEINER

Paul Weiner

 

Chief Financial Officer (Principal Financial Officer and Principal Accounting Officer)

 

June 18, 2015

*

Kenneth Fallon III

 

Chairman of the Board of Directors

 

June 18, 2015

*

Bradley Langdale

 

Director

 

June 18, 2015

*

Colm Lanigan

 

Director

 

June 18, 2015

/s/ RICHARD MEELIA

Richard Meelia

 

Director

 

June 18, 2015

*

Michael Milligan

 

Director

 

June 18, 2015

*

Frank Mühlenbeck, Ph.D.

 

Director

 

June 18, 2015

*

Aditya Puri

 

Director

 

June 18, 2015

*

Laurent Souviron

 

Director

 

June 18, 2015

 


*By:

 

/s/ PHILIPP LANG

Philipp Lang, M.D.
Attorney-in-Fact

 

 

Table of Contents


EXHIBIT INDEX

Exhibit
number
  Description
  1.1   Underwriting Agreement
  3.1   Amended and Restated Certificate of Incorporation of the Registrant, as amended
  3.2 * Form of Restated Certificate of Incorporation of the Registrant to be effective upon the closing of this offering
  3.3 * Bylaws of the Registrant
  3.4 * Form of Amended and Restated Bylaws of the Registrant to be effective upon the closing of this offering
  4.1   Specimen certificate evidencing shares of common stock
  5.1   Opinion of Wilmer Cutler Pickering Hale and Dorr LLP
  10.1   Amended and Restated Information and Registration Rights Agreement, dated as of June 15, 2015, among the Registrant and the other parties thereto
  10.2 * 2004 Stock Option Plan
  10.3 * Form of Incentive Stock Option Agreement under 2004 Stock Option Plan
  10.4 * Form of Nonqualified Stock Option Agreement under 2004 Stock Option Plan
  10.5 * Form of Stock Purchase Agreement for Incentive Stock Option Agreement under 2004 Stock Option Plan
  10.6 * Form of Stock Purchase Agreement for Nonqualified Stock Option Agreement under 2004 Stock Option Plan
  10.7 * 2011 Stock Option/Stock Issuance Plan
  10.8 * Form of Notice of Grant of Incentive Stock Option under 2011 Stock Option/Stock Issuance Plan
  10.9 * Form of Notice of Grant of Nonstatutory Stock Option under 2011 Stock Option/Stock Issuance Plan
  10.10 * Form of Stock Purchase Agreement under 2011 Stock Option/Stock Issuance Plan
  10.11 * 2015 Stock Incentive Plan
  10.12 * Form of Incentive Stock Option Agreement under 2015 Stock Incentive Plan
  10.13 * Form of Nonstatutory Stock Option Agreement under 2015 Stock Incentive Plan
  10.14 * First Amended and Restated Employment Agreement, dated as of January 14, 2015, between the Registrant and Philipp Lang, as amended by Amendment No. 1 to First Amended and Restated Employment Agreement, dated as of May 29, 2015 between the Registrant and Philipp Lang
  10.15 * Amended and Restated Employment Agreement, dated as of May 21, 2015, between the Registrant and Paul Weiner, together with the Employee Confidential Information, Inventions and Non-Competition Agreement, dated as of May 21, 2015, between the Registrant and Paul Weiner
  10.16 * Amended and Restated Employment Agreement, dated as of May 21, 2015, between the Registrant and Daniel Steines, together with the Amended and Restated Employee Confidential Information, Inventions and Non-Competition Agreement, dated as of June 10, 2015, between the Registrant and Daniel Steines
  10.17 * Amended and Restated Employment Agreement, dated as of May 21, 2015, between the Registrant and David Cerveny, together with the Employee Confidential Information, Inventions and Non-Competition Agreement, dated as of May 21, 2015, between the Registrant and David Cerveny

Table of Contents

Exhibit
number
  Description
  10.18 * Amended and Restated Revenue Sharing Agreement, dated as of September 2, 2011, between the Registrant and Philipp Lang
  10.19 * Amended and Restated Employee Confidential Information, Inventions and Non-Competition Agreement, effective as of January 14, 2015, between the Registrant and Philipp Lang
  10.20 * Form of Director and Officer Indemnification Agreement
  10.21 * Loan and Security Agreement, dated as of November 7, 2014, among the Registrant, Silicon Valley Bank, and the other parties thereto, as amended by First Amendment to Loan and Security Agreement, dated as of March 4, 2015, among the Registrant, Silicon Valley Bank and the other parties thereto.
  10.22 * Loan Agreement, dated as of June 29, 2011, between the Registrant and Massachusetts Development Finance Agency
  10.23 * Lease Agreement, dated as of August 20, 2014, between the Registrant and Wakefield Investments, Inc.
  10.24 * Sublease, dated as of May 30, 2012, between the Registrant and Reveal Imaging Technologies, Inc.
  10.25 * Lease Agreement, dated as of August 26, 2010, between the Registrant and N.W. Middlesex 36 Trust, as amended by Termination Agreement, dated as of May 13, 2014 between the Registrant and N.W. Middlesex 36 Trust
  10.26 * License Agreement, effective as of April 10, 2007, between the Registrant and Vertegen, Inc., as amended by First Amendment to License Agreement, dated as of May 20, 2015, between the Registrant and Vertegen, Inc.
  10.27 * Amended and Restated Employment Agreement, dated as of May 21, 2015, between the Registrant and Robert Law III, together with the Employee Confidential Information, Inventions and Non-Competition Agreement, dated as of May 21, 2015, between the Registrant and Robert Law III
  10.28 * Amended and Restated Employment Agreement, dated as of May 21, 2015, between the Registrant and Matthew Scott, together with the Employee Confidential Information, Inventions and Non-Competition Agreement, dated as of May 21, 2015, between the Registrant and Matthew Scott
  10.29 * Sponsor Designee Recommendation Agreement, dated as of May 21, 2015, between the Registrant and Procific
  10.30 * Letter Agreement, dated as of July 16, 2013, between the Registrant and Stanhope Investments
  10.31   2015 Annual Cash Bonus and Equity Grant Plan
  10.32 *† License Agreement, dated as of April 13, 2015, between the Registrant and MicroPort Orthopedics Inc.
  10.33 * License Agreement, dated as of April 13, 2015, between the Registrant and each of Wright Medical Group, Inc. and Wright Medical Technology, Inc.
  10.34   Form of Restricted Stock Agreement under 2015 Stock Incentive Plan
  21.1 * Subsidiaries of the Registrant
  23.1   Consent of Grant Thornton LLP, Independent Registered Public Accounting Firm
  23.2   Consent of Wilmer Cutler Pickering Hale and Dorr LLP (included in Exhibit 5.1)
  24.1 * Power of Attorney (included on signature page)
  24.2   Power of Attorney for Richard Meelia

*
Previously filed.

Confidential treatment requested as to certain portions, which portions have been omitted and filed separately with the Securities and Exchange Commission.