Sign In  |  Register  |  About Burlingame  |  Contact Us

Burlingame, CA
September 01, 2020 10:18am
7-Day Forecast | Traffic
  • Search Hotels in Burlingame

  • CHECK-IN:
  • CHECK-OUT:
  • ROOMS:

Daily Maintenance Of UBO CNC Router Engraving Machine

Shandong UBO CNC Machinery Co., Ltd.main scop:

CNC ROUTER

LASER MACHINE

STONE CNCATC MACHINE

CNC PLASMA CUTTING MACHINE

Now introduce the daily maintenance of ubo CNC router engraving machine:

1. The continuous running time is less than 10 hours a day, (water-cooled spindle) to ensure the cleanliness of the cooling water and the normal operation of the water pump, and the water-spindle motor must not be short of water, and the cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.

2. After each use of the machine, pay attention to cleaning, be sure to clean up the dust on the platform and the transmission system, and lubricate the transmission system (X, Y, Z three axes) regularly (weekly). (Note: the X, Y, Z three-axis rails are maintained with oil; the screw part is added with high-speed butter; if the working environment temperature is too low in winter, the screw and rail (square rail or circular rail) part should be rinsed with gasoline first. and then add oil, otherwise the resistance of the transmission part of the machine will be too large and the machine will be dislocated.)

3. For the maintenance and inspection of electrical appliances, be sure to cut off the power supply and wait until the monitor has no display and the main circuit power indicator light goes out.The ubo cnc router engraving machine is a computer-controlled router engraving machine, and it can also be called a computer numerical control engraving machine. Can control the engraving machine to engrave plates (wood, stone, MDF, etc.). Now there are many types of computer engraving machines on the market. The mainstream computer engraving machines in the market include woodworking engraving machines, advertising engraving machines, stone engraving machines, cylindrical engraving machines, laser engraving machines, laser cutting machines, laser marking machines, and glass engraving machines , Metal engraving machine.

original source: https://www.ubocnc.com/news/daily-maintenance-of-ubo-cnc-router-engraving-machine/

Media Contact
Company Name: SHANDONG UBO CNC MACHINERY CO., LTD
Email: Send Email
Phone: +8615315139350
Address:2nd Floor, Building 3, Biobase Headquarters, No. 9 Gangxing Road, Jinan Area, China (Shandong) Pilot Free Trade Zone
Country: China
Website: https://www.ubocnc.com/


Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
 
 
Copyright © 2010-2020 Burlingame.com & California Media Partners, LLC. All rights reserved.