JEC-9.28.2012-10K
Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 __________________________________________________ 
FORM 10-K
ANNUAL REPORT PURSUANT TO
SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended September 28, 2012                         Commission File No. 1-7463
__________________________________________________ 
 Jacobs Engineering Group Inc.
 
 
 
Delaware
 
95-4081636
State of incorporation
 
IRS Employer
identification number
 
 
1111 South Arroyo Parkway
Pasadena, California 91105
 
(626) 578-3500
Address of principal executive offices
 
Telephone number (including area code)
Securities registered pursuant to Section 12(b) of the Act:
 __________________________________________________ 
Title of Each Class
 
Name of Each Exchange on Which Registered
Common Stock, $1 par value
 
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: None
 __________________________________________________ 
Indicate by check-mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act:   ý    Yes  ¨    No
Indicate by check-mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.  ¨    Yes  ý    No
Indicate by check-mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  ý    Yes  ¨    No
Indicate by check-mark whether the Registrant: has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files).
ý    Yes - ¨    No
Indicate by check-mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ý
Indicate by check-mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
 
ý
  
Accelerated filer
 
¨
 
 
 
 
Non-accelerated filer
 
¨
  
Smaller reporting company
 
¨
Indicate by check-mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act)  ¨    Yes  ý    No
There were 130,076,572 shares of common stock outstanding as of November 15, 2012. The aggregate market value of the Registrant’s common equity held by non-affiliates was approximately $5.7 billion as of March 30, 2012, based upon the last reported sales price on the New York Stock Exchange on that date.
__________________________________________________ 
DOCUMENTS INCORPORATED BY REFERENCE
Part III — Portions of the Registrant’s definitive Proxy Statement to be issued in connection with its 2013 Annual Meeting of Shareholders.


Table of Contents

JACOBS ENGINEERING GROUP INC.
Fiscal 2012 Annual Report on Form 10-K
Table of Contents
 
 
 
 
 
Item
  
 
Page No.
 
 
 
 
Item 1.
 
Item 1A.
 
Item 1B.
 
Item 2.
 
Item 3.
 
 
 
 
 
 
 
 
Item 5.
 
Item 6.
 
Item 7.
 
Item 7A.
 
Item 8.
 
Item 9.
 
Item 9A.
 
Item 9B.
 
 
 
 
 
 
 
 
Item 10.
 
Item 11.
 
Item 12.
 
Item 13.
 
Item 14.
 
 
 
 
 
 
 
 
Item 15.
 
 

Page2

Table of Contents

PART I
FORWARD-LOOKING STATEMENTS
In addition to historical information, this Annual Report on Form 10-K contains forward-looking statements that are not based on historical fact. When used in this report, words such as “expects”, “anticipates”, “believes”, “seeks”, "see", “estimates”, “plans”, “intends”, and similar words identify forward-looking statements. You should not place undue reliance on any such forward-looking statements. Although such statements are based on management’s current estimates and expectations, and currently available competitive, financial, and economic data, forward-looking statements are inherently uncertain and involve risks and uncertainties that could cause our actual results to differ materially from what may be inferred from the forward-looking statements. Some of the factors that could cause or contribute to such differences are listed and discussed in Item 1A—Risk Factors, below. The risk factors and other matters described herein are not all-inclusive, and we undertake no obligation to release publicly any revisions or updates to any forward-looking statements that are contained in this document. We encourage you to read carefully the risk factors described in other documents we file from time to time with the United States Securities and Exchange Commission (the “SEC”).
Unless the context otherwise requires, all references herein to "Jacobs" or the "Registrant" are to Jacobs Engineering Group Inc. and its predecessors, and references to the "Company", "we", "us" or "our" are to Jacobs Engineering Group Inc. and its consolidated subsidiaries.



Item 1.
BUSINESS

General Background Information
We are one of the largest technical professional services firms in the world. We provide a diverse range of technical, professional, and construction services to a large number of industrial, commercial, and governmental clients. We provide four broad categories of services:
Project Services (including engineering, design, architecture, interiors, planning, environmental, and similar services);
Process, Scientific, and Systems Consulting services (including services performed in connection with scientific testing, analysis, and consulting activities, as well as information technology and systems engineering and integration activities);
Construction services (encompassing traditional field construction services as well as modular construction activities, direct hire construction, and construction management services); and
Operations and Maintenance services (including services performed in connection with operating large, complex facilities on behalf of clients, as well as services involving process plant and facilities maintenance).
We focus our services on clients operating in the following industries and markets:
Oil and gas exploration, production, and refining;
Chemicals and polymers;
Programs for various national governments, including aerospace, defense, and environmental programs;
Buildings (including specialized buildings for clients operating in the fields of healthcare, education, and high technology; governmental complexes; other specialized civic and mission critical buildings, installations, and laboratories; and retail and commercial buildings);
Infrastructure;
Mining and minerals;
Pharmaceuticals and biotechnology;
Power;
Pulp and paper;
Technology and manufacturing; and,
Food and consumer products, among others.

Page3

Table of Contents

We are headquartered in Pasadena, California, USA, and provide our services through more than 200 offices located around the globe, primarily in North America, South America, Europe, the Middle East, India, Australia, Africa, and Asia.
How We Operate
The relationships we have with our clients drive our business. As a broad-based technical professional services firm, we offer a range of services to help our clients maintain a competitive edge in their respective markets. From feasibility studies to design, to engineering, to construction, to start-up and commissioning, and then to operations and maintenance, we customize our services to meet business and project goals. Our global network of professionals works with a multi-office approach in an effort to provide clients with the best, most economical project or program solutions.
We strive to provide client value through continuous improvement in our performance. We regularly monitor our clients' expectations, our quality system, and our operational performance. Tools such as our Jacobs Value Enhancing Practices, Global Standard Operating Procedures, project reviews, the Jacobs System to Ensure Project Success ("JSTEPS") and Safe Plans of Action ("SPAs") provide added value to our clients' projects. They also allow us to create performance improvement actions during the project execution. Through continuous improvement upon our performance, our tools, and our processes, we believe we can offer our clients superior value when they do business with us.
JacobsValue+SM ("Value Plus") is an internal tool we use to document and quantify the actual value or savings we provide to our clients and their projects. Some of the benefits achieved through the Value Plus program include lower total installed cost, shorter schedule, and reduced life cycle cost. Value Plus is implemented at project initiation: a project goal is created, and cost-saving ideas are entered into the Value Plus database. When the Value Plus cycle is complete, the project team and client identify unique cost and/or schedule reductions for the project.
Our Business Model
Our organizational structure and integrated system for delivering services are key components of our business strategy. Our operating units generally use a matrix organizational structure whereby our project management functions are supported by the various technical planning, design, and construction disciplines that are necessary to effectively execute long-term engineering and construction contracts. We recognize that technical expertise alone cannot grow our business; project management skills and the ability to manage multi-million dollar projects and programs for our clients is critical to our success. Crucial functions, such as project controls and procurement, are embedded within each of our major offices and serve operations by providing specialized services required by projects.
In managing our business, we encourage cooperation, not competition, across all of our offices. We do not maintain profit centers, and we expect our offices to provide and share resources to deliver those services required by our client contracts regardless of which office "owns" the contract. As an example, we sponsor one, company-wide incentive bonus plan that rewards employees based on the results of the Company as a whole. Our organizational structure encourages our operating groups to work collaboratively, while simultaneously helping to reduce costs and promote an efficient delivery system for all of our services.
Three important concepts support our business model: a multi-domestic approach, a boundaryless approach, and a focus on cost management.
Our global reach enables us to provide local, customized service worldwide. We work in many countries with locally-staffed offices that share a common set of values and a single vision while maintaining one-on-one contact with individual clients. This approach provides customized services suited to the locale and defines our multi-domestic approach.
We take a boundaryless approach to our business. This means that we try to enhance local expertise with the best talent and the best technology the Company has to offer regardless of office location. The diversity of our employees reflects our geographic reach as well as the wide range of our technical capabilities. Our talent pool is flexible, so we are able to be where our clients need us, doing the work that is necessary to achieve solutions for them.
Our continual emphasis on managing costs is an important component of our business model. As companies providing technical, professional, and construction services are required to compete against each other across geographic boundaries, the company that can provide its clients with cost-efficient solutions to their project needs has an advantage. Managing general and administrative (“G&A”) costs is in our nature: since Jacobs' founding in 1947, keeping costs down has been critical to the way we operate. Another way we provide savings to our clients is by utilizing resources in our overseas offices that may be more cost competitive. With our focus on driving costs down throughout every level of our organization, we strive to deliver superior technical, professional, and construction services safely, efficiently, and within the cost and time parameters our clients require.

Page4

Table of Contents

The Company's Culture
Our employees are our most important and valuable asset and, therefore, the prevention of job-related injuries is given top priority. It is the policy of the Company to provide and maintain a safe and healthy working environment and to follow operating practices that safeguard all employees and result in a more efficient operation.
BeyondZero® , the name of our program that promotes our culture of caring, moves beyond efforts to have an incident and injury-free safety performance. We implement a true culture of caring where concern for employees' health, safety, and welfare extends outside the office walls, beyond the project site fences and into their homes, cars, and all the places where they interact with family, friends, and fellow employees.
Our employees and business partners are expected to follow the highest principles of business conduct, integrity, and ethics as they carry out their responsibilities. Our employees are guided by the following principles in carrying out their responsibilities: loyalty, compliance with applicable laws, observance of ethical standards, avoidance of conflicts of interest, and communication. We endeavor to deal fairly with our employees, customers, suppliers, and competitors, and to respect the policies and procedures of those outside the Company.
Our objective is to present a clear and consistent image of our Company to our clients, employees, shareholders, and business partners — regarding how we behave, how we communicate, how we look, and most importantly, how our promises to our clients are delivered — anywhere in the world. 
We accomplish this foremost through our core values, which allow us to behave as one company and unify us worldwide. By keeping our core values as a central focus of our Company, we are able to think the same way and arrive at similar conclusions, regardless of our physical location. Our core values are:
People are our greatest asset;
We are relationship-based; and
Growth is an imperative.
Our core values are consistent with our commitment to sustainability. We see sustainability as a balance between the social, economic, and environmental aspects of a business. Too much emphasis on any single aspect cannot achieve sustainability. Our core values drive us to continuously improve efficiencies and reduce energy and natural resources; practices that drive down costs and contribute to a lower impact on the environment. Around the world, across all disciplines, we work to demonstrate our commitment to sustainability through our actions and project delivery. That commitment is reflected every day through our low-cost posture, our BeyondZero® safety philosophy, and our adherence to our seven principles of sustainability. These principles are:
Sustainable development is a corporate priority;
We seek broad, deep, differentiated capabilities and services;
Sustainable development is integrated into our business;
Training and education are important;
Our facilities and operations follow sustainable principles;
We contribute to the common effort for sustainability; and
We are open and transparent.
Delivering timely and efficient engineering and design services and effective, tailored sustainable solutions are the best way we can save our clients money and make their businesses successful. Such sustainable solutions that allow our clients to achieve their project goals are a key aspect of the creation of an enduring sustainable legacy.
Applying the best, most efficient and effective sustainable solutions for our clients worldwide, in all major industries in which we operate, allows us to make a significant contribution to a safe and sustainable future.
With respect to human resources, our goal is to establish an inclusive, diverse workplace that energizes the people who fuel our Company's growth. Although we are a large company with over 60,000 employees in more than 25 countries, our employees are unified in their focus on superior value, safety, and ethical business practices; regardless of the country.
Our work locations around the world are multicultural, and our people are successful at building networks, breaking down boundaries, and embracing diversity. They collaborate and learn new skills from one another. We recognize that an

Page5

Table of Contents

inclusive environment is a healthy one that results in better decisions, better talent, and more creative solutions to offer our clients. We seek employees that operate with a boundaryless mindset.
We have engaged, committed, and productive people who add value to our project teams. We focus on hiring the best, keeping the best, and continually improving the skills and capabilities of individuals and teams.
How We Grow
We are committed to a relationship-based business model, which is central to our sustained growth and profitability. We pursue the development of long-term relationships and alliances with our clients. By working with our clients on their capital programs, we increase our understanding of their overall business needs, as well as the unique technical requirements of their specific projects. This increased understanding enables us, we believe, to provide superior value to our clients. Our approach provides us with opportunities to market all the services our clients are expected to need in the pre-design phase, such as master planning, permitting, or project finance options; in the design phase; and in the construction, post-start-up and commissioning phases of a facility, including operations and maintenance services.
Our relationships with clients also present ongoing opportunities to expand into adjacent markets. For example, clients operating in the mining and minerals market often have a need for our infrastructure and buildings capabilities. The same is true for clients operating in other markets.
We market our services to clients in a wide range of public and institutional, process, and industrial markets. We increase our opportunities through selective market diversity, and are able to price contracts more competitively and enhance overall profitability while delivering additional value to our clients by integrating and bundling our services. In complex economic times, we have the ability to evolve along with market cycles worldwide. When opportunities decrease in a particular market or geography, other opportunities often increase. Because of our selective market diversity, we believe we are well-positioned to address a wide range of opportunities across many markets and geographies, which helps us grow our business.
Closely linked to our relationship-based business model is our multi-domestic geographic strategy. Our core clients can depend on us for assistance with their engineering and construction needs when they move projects around the world. We therefore follow our clients into new geographic regions, which helps us perform meaningful portions of their projects by utilizing local resources rather than exporting the work to other offices.
The Role of Acquisitions in the Development Our Business
When we review acquisition targets, we are conscious of the effect the acquisition may have on our client base. We favor acquisitions that allow us to (i) expand into a new client market; (ii) enhance the range of services we provide existing clients; and/or (iii) access new geographic areas in which our clients either already operate or plan to expand. By expanding into new geographic areas and adding to our existing technical and project management capabilities, we strive to position ourselves as a preferred, single-source provider of technical, professional, and construction services to our major clients. The following is a brief description of some of our recent key acquisitions:
In August 2012, we acquired a consulting project management business based in Sydney, Australia. The primary purpose of this acquisition was to expand our geographic presence and grow our infrastructure business in Australia.
In July 2012, we acquired a majority ownership of DM Petroleum Operations Company ("DMP") headquartered in New Orleans, Louisiana. DMP manages and operates the Strategic Petroleum Reserve ("SPR") under contract to the United States ("U.S.") Department of Energy (the "DoE"). The SPR is the world's largest reserve of emergency crude oil, and DMP has been the SPR management and operating contractor since 1993. DMP builds on our locally-based petroleum operations and maintenance expertise.
In December 2011, we acquired Unique World Pty Ltd., headquartered in Sydney, Australia. Unique World is an information management and knowledge management consultancy specializing in enabling technologies such as collaboration, business process automation, business intelligence, intranets, and portals. Unique World expands the Company's capabilities in Australia to include such information technology ("IT") services, as well as expanding the client base to which we can offer these services.
In November 2011, we acquired KlingStubbins, Inc., a 500-person firm headquartered in Philadelphia, Pennsylvania, USA, with offices located throughout the U.S. and in China. KlingStubbins provides professional services in the areas of architecture, engineering, interiors, planning, and landscape architecture. The markets served by KlingStubbins include corporate/commercial, governmental, science

Page6

Table of Contents

and technology, higher education, mission critical, and interiors.
In May 2011, we acquired an additional 55% interest in Consulting Engineering Services (India) Private Limited (“CES”), a leading power, infrastructure, and civil engineering company headquartered in Delhi, India. Founded in 1969, CES employs more than 2,000 people and provides a range of solutions in infrastructure development, planning, engineering, and construction management. This acquisition significantly increased our existing resources and capabilities in India to more than 4,500 employees and expanded our presence in other regions in Asia and the Middle East.
In February 2011, we acquired Aker Solutions’ Process and Construction (“P&C”) business, a 4,500-person operating unit serving clients in the oil, gas, and refining markets, as well as the mining and minerals, chemicals, energy and environmental industries. The primary purpose for acquiring Aker’s P&C business was to expand significantly our global presence in the mining and metals market; provide a new geographic region with South America; and enhance our regional presence in Australia, Europe, and North America. In a related transaction completed in April 2011, we acquired Aker Projects (Shanghai) Company Limited (Aker Solutions’ onshore P&C operations in China). This element of the Aker transactions greatly expanded our presence and capabilities in China. The businesses and operations acquired in this transaction are sometimes referred to herein collectively as the "Aker Entities".
In December 2010, we acquired Damon S. Williams (“DSWA”), a 50-person professional services firm headquartered in Phoenix, Arizona. Founded in 1987, DSWA specializes in water and wastewater facilities, with expertise in planning, design, construction administration and operations services. The primary purpose for acquiring DSWA was to expand our water and wastewater capabilities to better serve our customers in the western U.S.
In October 2010, we acquired Sula Systems Ltd (“Sula”), a 70-person professional services firm headquartered in Gloucestershire, England. Founded in 1996, Sula provides systems engineering and technical services on large, complex programs and projects to clients in the United Kingdom defense and aerospace markets. Sula is also involved in a number of major defense programs in areas such as armored vehicles, complex weapons, test and evaluation, submarine nuclear propulsion, and capability and network level systems engineering. Sula also provides services relating to civil airliners and space-based subsystems. The primary purpose for acquiring Sula was to expand the Company’s position in the defense and aerospace markets.
In October 2010, we acquired TechTeam Government Solutions, Inc. ("TechTeam") a 500-person IT solutions company that provides support to U.S. federal, state and local government agencies, including the U.S. Department of Homeland Security, U.S. Army and U.S. Army Corps of Engineers. The firm’s core competencies include systems integration, enterprise application integration, ERP implementation support, IT infrastructure support, network operations management, and call center operations. The primary purpose for acquiring TechTeam was to expand the Company’s IT, modeling, and simulation services capabilities with the U.S. federal government.
In February 2010, we acquired Jordan, Jones and Goulding, Inc. (“JJG”), a 500-person professional services firm headquartered in Atlanta, Georgia. Founded in 1958, JJG provides engineering, planning, and consulting services for water, wastewater, environmental and other clients. The primary purpose for acquiring JJG was to expand the Company’s capabilities in the North American areas of water and wastewater.
In December 2009, we acquired TYBRIN Corporation (“TYBRIN”), a 1,500-person professional services firm headquartered in Fort Walton Beach, Florida. Founded in 1972, TYBRIN is a leading supplier of mission planning solutions, systems engineering, software development, modeling and combat environment simulation, engineering and testing, range safety, and other services to the U.S. Department of Defense (“DoD”), the National Aeronautics and Space Administration (“NASA”), and other government clients. The primary purpose for acquiring TYBRIN was to expand our professional services business with the U.S. federal government.
In March 2008, we acquired a 60% interest in Zamel & Turbag Consulting Engineers (“Zate”). Located in Saudi Arabia, Zate was an approximately 500-person professional services firm providing engineering and construction management services to clients operating in the oil & gas, refining, and chemicals industries. The primary purpose for acquiring Zate was to expand our business in the Middle East.

Page7

Table of Contents

After we complete an acquisition, we move very quickly to integrate the newly-acquired operations. We typically assign senior operations personnel to manage the overall integration process with assistance from our sales, accounting, legal, IT, human resources, and risk management departments. Although integrating newly acquired businesses can be very challenging, the assimilation process is critical in order to assure (i) that our global businesses processes and systems are properly deployed throughout the newly-acquired entities and (ii) that we can begin to leverage-off the acquired talents, skills, and expertise to grow our business and help our clients execute their capital programs. Newly-acquired businesses are not left as stand-alone entities within the Company’s internal reporting system. The businesses we acquire are typically folded-in to existing operational organizations within the Company.
Financial Information About Segments
Although we describe our business in this Annual Report on Form 10-K in terms of the various services we provide, the markets in which our clients operate, and the geographic areas in which we operate, we have concluded that our operations may be aggregated into one reportable segment pursuant to those accounting principles generally accepted in the U.S. (“U.S. GAAP”). In making this determination, we considered the various economic characteristics of our operations, including: the nature of the services we provide, the nature of our internal processes for delivering and distributing those services, and the types of customers we have. In addition to the discussion that follows, please refer to Note 14 — Segment Information of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K.
There is a high degree of similarity among the workforces employed across the categories of services we provide. For example, professionals in engineering and design services (i.e., services provided by persons who are degreed, and in certain circumstances licensed, such as engineers, architects, scientists, and economists) exist in all four service categories. In addition, there is a high degree of similarity among a significant component of the workforces we employ to perform construction and operations and maintenance ("O&M") projects. In providing construction and O&M services, we employ a large number of skilled craft labor personnel. These may include welders, pipe fitters, electricians, crane operators, and other personnel who work on very large capital projects (in the case of projects classified within the construction services category) or on smaller capital projects (in the case of maintenance projects classified within the O&M services category).

All of our offices use a matrix organizational structure. Our results, therefore, are dependent on groups representing technical disciplines (e.g., electrical engineering, mechanical engineering, cost engineering, etc.) supporting project management personnel (who maintain the relationship between our clients and us and are ultimately responsible for delivering projects to our clients safely, on time, and on budget). Additionally, all of our operating regions use common tools, policies, and procedures to manage and run their respective units. These include project review meetings, project performance evaluations, and project execution plans.
    
Each of the Company's operating regions provide most of the services the Company offers generally, and each of our operating regions include in its customer base many of the same or similar clients as our other regions.
The use of technology throughout our organization is highly uniform. Whether it is computer-aided design and drafting (“CADD”) applications used by our engineering and design staff, or modeling programs used by the scientific and consulting staff, or scheduling, estimating, and cost control applications used by home-office personnel in support of our construction and maintenance activities, all of the service categories described above are equally affected by changes in technology as they occur in the economy at large.
Furthermore, the types of information and internal reports used by the Company’s chief operating decision maker (the “CODM”), who is also the Company’s chief executive officer and other members of management to monitor performance, evaluate results of operations, allocate resources, and otherwise manage the business support a single reportable segment. Accordingly, based on these similarities, we have concluded that our operations may be aggregated into one reportable segment for purposes of the disclosures included in this Annual Report on Form 10-K.
 

Page8

Table of Contents


Services Provided
As described above, the services we provide generally fall into the following four broad categories: Project Services; Process, Scientific, and Systems Consulting services; Construction services; and Operations and Maintenance services.    
The following table sets forth our revenues from each of our four service categories for each of the last five fiscal years (in thousands):
 
 
2012
 
2011
 
2010
 
2009
 
2008
Project Services
 
$
5,693,419

 
$
5,070,575

 
$
4,224,898

 
$
4,644,043

 
$
5,128,456

Process, Scientific, and Systems Consulting
 
772,031

 
815,561

 
888,405

 
894,446

 
770,223

Construction
 
3,145,311

 
3,060,820

 
3,722,101

 
4,763,640

 
4,239,439

Operations and Maintenance (“O&M”)
 
1,283,017

 
1,434,708

 
1,080,113

 
1,165,247

 
1,114,041

 
 
$
10,893,778

 
$
10,381,664

 
$
9,915,517

 
$
11,467,376

 
$
11,252,159


Project Services
We employ the engineering, architecture, interiors, design, planning, and related disciplines necessary to design and engineer modern process plants, buildings, infrastructure projects, technology and manufacturing facilities, consumer products manufacturing facilities, power plants and stations, pulp and paper plants, and other facilities.
We are capable of providing our clients with a variety of value engineering services, including "safety in design". Through safety in design we integrate best practices, hazard analysis, and risk assessment methods early in the design phase of projects, taking those steps necessary to eliminate or mitigate injury and damage during the construction, start-up, testing and commissioning, and operations phases of a project.
In the area of construction management, we provide our clients with a wide range of services as an agent for our clients. We may act as program director, whereby we oversee, on the owner's behalf, the complete planning, design, and construction phases of the project. Alternatively, our services may be limited to providing construction consulting.
Project Services also includes planning, scheduling, procurement, estimating, cost engineering, project accounting, quality and safety, and all other key support services needed for complete cradle-to-grave project delivery.
Process, Scientific, and Systems Consulting Services
We employ the professional and technical skills and expertise with respect to a broad range of consulting services, including: performing pricing studies, market analyses, and financial projections necessary in determining the feasibility of a project; performing gasoline reformulation modeling; analyzing and evaluating layout and mechanical designs for complex processing plants; analyzing automation and control systems; analyzing, designing, and executing biocontainment strategies; developing and performing process protocols with respect to the U.S. Food and Drug Administration-mandated qualification and validation requirements; and performing geological and metallurgical studies.
Also included in this service category are revenues relating to defense and aerospace-related programs. Such services typically are more technical and scientific in nature than other project services we provide, and may involve such tasks as supporting the development and testing of conventional weapons systems; weapons modeling and simulations; computer systems development, maintenance, and support; evaluation and testing of mission-critical control systems; aerospace, testing, and propulsion systems and facilities; and other highly technical or scientific tasks.
Construction
In addition to the construction management services included under Project Services above, we provide traditional field construction services to private and public sector clients. We also provide our clients with a modular construction option. Our modular construction includes the engineering and construction of a facility in an off-site fabrication and assembly environment, with final completion during the field erection phase. The option provides our clients with an alternative approach to traditional methods of engineering and construction, which can compress and shorten the construction schedule, reduce risk, lower costs, and provide environmental benefits. In the area of environmental remediation and restoration, we also provide environmental remedial construction services for a variety of public and private sector clients.

Page9

Table of Contents

Historically, our field construction activities have been focused primarily on those construction projects for which we perform much of the related engineering and design work. By focusing our construction efforts in this way, we minimize the risks associated with constructing complex projects based on designs prepared by third parties. The financial risk to us of constructing complex assets based on designs prepared by third parties may be particularly significant on fixed-price contracts; therefore, we generally avoid this type of project. However, we will pursue construction-only projects when we can negotiate pricing and other contract terms we deem acceptable and which we believe can result in a fair return for the degree of risk we assume.
Operations and Maintenance ("O&M") Services
O&M refers to all of the tasks required to operate and maintain large, complex facilities on behalf of clients. We provide key management and support services over all aspects of the operations of a facility, including managing subcontractors and other on-site personnel. O&M also includes process plant maintenance services, which generally involves all tasks required to keep a process plant (typically a refinery or chemical plant) in day-to-day operation.
Within the aerospace and defense areas, O&M often requires us to provide the management and technical support services necessary to operate and maintain such sites as engine test facilities, weapons integration facilities, and high-tech simulation and verification centers. Such O&M contracts also frequently require us to provide facilities management and maintenance services; utilities operations and maintenance services; property management and disposition services; and construction support services.
Within the environmental area, O&M often includes engineering and technical support services as well as program management services necessary to remediate contaminated sites.
Although the gross profit margins we realize from O&M services are generally lower than those associated with the other services we provide, the costs to support maintenance activities are also generally lower. Also, O&M services offer us an opportunity for long-term relationships with clients. This aspect of maintenance services greatly reduces the selling costs in respect of such services.

The Industries and Markets in Which Our Clients Operate
We market our services to clients where the scope of work required by their capital projects and programs is within our expertise. Within each market, we may offer specialty services unique to the sector, or services which differentiate us from our competitors in the marketplace.
The following table sets forth our revenues from each of the various industry groups and markets in which our clients operate for each of the last five fiscal years (in thousands):
 
 
 
2012
 
2011
 
2010
 
2009
 
2008
Refining – Downstream
 
$
2,379,750

 
$
2,256,092

 
$
2,876,059

 
$
3,850,734

 
$
3,525,838

National Government Programs
 
2,272,611

 
2,313,240

 
2,314,548

 
2,148,688

 
1,784,150

Chemicals and Polymers
 
1,704,723

 
1,461,125

 
1,203,373

 
1,210,027

 
1,409,868

Infrastructure
 
1,085,649

 
1,219,633

 
938,978

 
933,519

 
935,333

Buildings
 
843,938

 
893,528

 
869,248

 
793,041

 
900,115

Oil & Gas – Upstream
 
790,546

 
753,471

 
559,492

 
895,284

 
1,102,743

Pharmaceuticals and Biotechnology
 
576,303

 
404,687

 
589,795

 
875,007

 
978,867

Mining & Minerals
 
550,134

 
449,194

 
26,161

 
136,851

 
66,206

Industrial and Other
 
690,124

 
630,694

 
537,863

 
624,225

 
549,039

 
 
$
10,893,778

 
$
10,381,664

 
$
9,915,517

 
$
11,467,376

 
$
11,252,159


Refining - Downstream
Our typical refining projects for global clients include new design and construction, revamps or expansions of existing plants, turnarounds, upgrades of individual process units within refineries, and long-term maintenance services. We also provide process assessments, facility appraisals, feasibility studies, technology evaluations, project finance structuring and support, and multi-client subscription services.

Page10

Table of Contents

Our modular construction capabilities, asset management/maintenance services, and formal client alliances help differentiate us to customers operating in this industry. Using modular construction decreases congestion at the construction site and provides enhanced safety, cost, and project execution benefits in remote locations.
We also include power generation projects within our clients' refining and processing facilities, such as simple and combined cycle power projects, industrial gas turbines, and emergency power generation stations. In addition, we offer support in the procurement and commissioning of equipment.
Oil & Gas - Upstream
As international oil companies develop reserves and try to maximize their existing resources, our expertise in a range of production methods, combined with our commitment to safety and strength in project management, helps us deliver a wide range of projects for oil and gas operators.
In the exploration and production market, our projects range from oil recovery through steam injection to gas treating, gas gathering, and gas storage projects including extraction of commercially valuable elements of the gas stream, utilizing new technologies such as Steam-Assisted Gravity Drainage ("SAGD").
Typical projects for our clients in this sector involve the design and construction of projects that recover oil and gas, and include oil thermal recovery facilities either by in-situ means or oil sands mining, upgraders, pipelines, gas plants, and CO2 flood. These are typically large projects that may involve many of our offices and often include work-share with our Mumbai, India office as a value-added engineering center to reduce project costs.
We also provide substantial maintenance and modification services for aging oil and gas facilities around the world. In connection with the refining market, we also provide process assessments, facility appraisals, feasibility studies, technology evaluations, project finance structuring consulting services, and other support services.    
National Government Programs
We categorize our National Government Programs as generally relating to aerospace and defense programs or environmental programs for government entities.
Aerospace and Defense Programs
We provide an in-depth range of science, engineering, construction and technical support services to the aerospace and defense industry. Long-term clients include the Ministry of Defence in the U.K., NASA, the DoD, the U.S. Special Operations Command ("USSOCOM"), and the Australian Department of Defence. Specific to NASA is our ability to design, build, operate, and maintain highly complex facilities relating to space systems, including test and evaluation facilities, launch facilities, and support infrastructure.
Our experience in the defense sector includes military systems acquisition management and strategic planning; operations and maintenance of test facilities and ranges; test and evaluation services in computer, laboratory, facility, and range environments; test facility computer systems instrumentation and diagnostics; and test facility design and build. We also provide systems engineering and integration of complex weapons and space systems, as well as hardware and software design of complex flight and ground systems.
We have provided advanced technology engineering services to the DoD for more than 50 years, and currently support major defense programs in the U.S. and internationally. We operate and maintain several DoD test centers and provide services and assist in the acquisition and development of systems and equipment for Special Operations Forces, as well as the development of biological, chemical, and nuclear detection and protection systems.
We maintain enterprise information systems for government and commercial clients worldwide, ranging from the operation of complex computational networks to the development and validation of specific software applications. We also support the DoD in a number of information technology programs, including network design, integration, and support; command and control technology; development and maintenance of databases and customized applications; and security solutions.
Environmental Programs
We provide environmental investigation, permitting, restoration, remediation, engineering, and site operations services to a number of European, North American, and Middle Eastern government agencies. Our projects include hazardous and nuclear waste management and site cleanup and closure; the preparation of feasibility studies and environmental

Page11

Table of Contents

investigations; environmental design; and remediation services on several national programs, as well as compliance with various national environmental policies.
Additionally, we support our clients in such areas as pollution prevention assessments; underground storage tank removal; contaminated soil and water remediation, monitoring and systems cleanup; long-term water quality management plans; and air quality planning and permitting. Much of this type of work is in support of large infrastructure projects that are underway in both Europe and in North America.
As a differentiating aspect of our support to our government clients, we provide asset management services in the form of long-term infrastructure operations and maintenance. Asset management also includes building closures that involve deactivation, decommissioning, and demolition of government facilities. This is an integral part of our services for the DoE.
Chemicals and Polymers
Our clients in this sector rely on our extensive knowledge of and experience with feedstock synthesis, chemical synthesis, and polymerization, including advanced polymerization reactors and state-of-the-art, post-reactor processing techniques to help bring new products and new facilities to market quickly and economically. We apply best practices on capital and maintenance work by leveraging resources within our alliances and partnerships. Specialty services we provide to our clients in these industries include project finance structuring consulting, market analysis, facility appraisal, and procurement with global inspection capabilities.
An important capability we offer our clients in the chemicals business is in the area of field services. We have contracts with major chemical producers worldwide to provide construction, on-site maintenance, and turnaround activities. Many of these contracts are evergreen in nature, with relationships extending over many years due to our focus on safety, value, and client satisfaction and lead us to numerous formal alliances.
Infrastructure
The strengths we offer our clients in this industry segment include expertise in transportation, transit, aviation, water and wastewater, and civil construction projects throughout North America, Europe, India, the Middle East, and Asia. Representative clients include national government departments and agencies in the U.S. and the U.K.; state departments of transportation within the U.S.; other regional and local agencies; and private industry freight transport firms.
Transportation development/rehabilitation is a core competency of our infrastructure business. Typical projects include highways, bridges, transit, tunnels, airports, railroads, intermodal facilities, and maritime or port projects where our interdisciplinary teams work independently or as an extension of the client's staff. Providing alternative financing methods has proven successful in Europe where there is privatization of public infrastructure systems.
In water infrastructure, we help public and private sector clients develop or rehabilitate critical water resource systems. Emerging economies are investing heavily in water and wastewater systems, while governments in North America and Europe are addressing the challenges of drought and aging infrastructure. We continue to develop water/wastewater conveyance systems and water flood defense projects.
Buildings
We have planned, designed, and constructed buildings for a variety of clients and markets for more than 60 years. We believe our global presence and understanding of contracting and delivery demands keep us in an excellent position to provide professional services worldwide.
Our diversified client base encompasses both public and private sectors and relates primarily to institutional, commercial, government and corporate buildings, including projects at many of the world's leading medical and research centers, and universities. We focus our efforts and resources in areas where capital spending initiatives drive demand, and where changes and advances in technology require innovative, value-adding solutions. We also provide integrated facility management services (sometimes through joint ventures with third parties) for which we assume responsibility for the ongoing operation and maintenance of entire commercial or industrial complexes on behalf of clients.
We have specific capabilities in energy and power, master planning, and commissioning for office headquarters, aviation facilities, mission-critical facilities, municipal and civic buildings, courts and correctional facilities, mixed-use and commercial centers, healthcare and education campuses, and recreation complexes.

Page12

Table of Contents

Advanced technology clients require highly specialized buildings in the fields of medical research, nano science, biotechnology, and laser sciences. We offer total integrated design and construction management solutions to these projects, many of which are world leaders in their functions.
Our recent acquisition of design firm KlingStubbins reinforces our commitment to our clients in this industry group, expanding our capabilities to clients in the pharma-bio, data center, government intelligence, corporate headquarters/interiors, and science and technology-based education markets around the globe.
Our government building projects include large, multi-year programs in the U.S. and Europe. U.S. government agencies we serve include the Federal Aviation Administration ("FAA"); the General Services Administration ("GSA"); the Internal Revenue Service ("IRS"); the U.S. Departments of State, Treasury, Agriculture, Homeland Security, and Defense; and the Army National Guard, among others. In the U.K., we are leading the Custodial Services' project management delivery program to upgrade the U.K. prison stock and also certain security-led programs such as upgrading works to the Palace of Westminster and some regional police authorities.
We are providing services to the DoD on military family housing; quality of life projects; training, maintenance, and readiness facilities; and command and control centers, as well as military facilities supporting the DoD's global re-basing program, the 2005 Base Realignment and Closure ("BRAC") program.
Mining and Minerals
Our mining and minerals business targets the non-ferrous and ferrous metal markets, precious metals, energy minerals (uranium, coal, oil sands), and industrial and fertilizer minerals (mineral sands, borates, trona, phosphates and potash). We work with many of the resources companies undertaking new and existing facility upgrades and process plant developments. We offer project management; front-end studies; and full engineering, procurement, construction, and maintenance ("EPCM") capabilities; completions, commissioning and start-up services specializing in new plant construction, brownfield expansions, and sustaining capital and maintenance projects.
For our mining and mineral clients, we provide the industry proprietary sulfuric acid production technology through our Chemetics® product - an important synergistic by-product of the smelting process and a key consumable in mines employing ore leaching technology. We are also able to deliver value to our mining clients by providing distinctive adjacent capabilities such as infrastructure, major equipment and materials to support their mining operations.
By focusing on mitigating our clients' resource risk, we are able to address challenges of tight labor markets by providing a reliable and familiar labor pool for their ongoing projects. We host local offices in the most active mining geographies (South America, Australia, Canada, India, South Africa), and can thereby effectively help our clients improve their project delivery and resource availability.
Pharmaceuticals and Biotechnology
We provide our pharmaceuticals and biotechnology clients single-point consulting, engineering, procurement, construction management, and validation ("EPCMV") project delivery, enabling us to execute the industry's largest capital programs on a single-responsibility basis. Typical projects in this sector include laboratories, research and development facilities, pilot plants, bulk active pharmaceutical ingredient production facilities, full-scale biotechnology production facilities, and secondary manufacturing facilities.
As companies in this industry continue to experience pressure to decrease product time-to-market, reduce costs, and increase return on investment, the types of services we provide have grown over the years to include modular construction, as well as consulting and strategic planning to help our clients complete capital projects faster and more efficiently.
Regulatory compliance, state-of-the-art technology, and increased efficiencies are critical issues to our clients in these industries. We have expertise in containment, barrier technology, locally controlled environments, building systems automation, and off-the-site design and fabrication of facility modules; in addition to vaccine production and purification, and aseptic processing.
Industrial and Other
We provide a broad range of services to our clients operating in the power; pulp and paper; high-technology manufacturing; food, beverage, and consumer products industries and markets.
        

Page13

Table of Contents

Power
Global energy demand is expected to grow by nearly 50 percent over the next 25 years, according to the U.S. Energy Information Administration. Significant capital spend in the power business is being driven by plant obsolescence and the need for utilities to comply with regulatory requirements and changes in environmental legislation. Our typical projects include simple and combined cycle power projects, cogeneration power plants, asset lifetime extension projects, and emergency power generation stations. In addition to traditional engineering, we offer services in procurement and commissioning of equipment, as well as construction services for the power market including thermal, biomass, renewables, and nuclear energy facilities.
Pulp and Paper
The pulp and paper industry has been consolidating for many years, and several of our traditional pulp and paper clients have emerged as major consumer product companies. These clients have created new opportunities for us in non-traditional areas, such as wall board plants and facilities that manufacture diapers and feminine care products. Typical projects range from small mill projects to complex, multi-million-dollar paper machine rebuilds, mill expansions, and the construction of new facilities.
Pulp and paper projects encompass many areas of a mill, and our expertise also includes the converting and packaging of paper products for distribution and consumer use. Our pulp and paper capability extends through our offices in the U.S., U.K., France, Spain, Italy, and Mexico to clients worldwide. A significant portion of our work consists of assisting our clients in their compliance with environmental regulations and standards that affect the pulp and paper industry. We monitor all key environmental regulations affecting our clients and offer compliance studies, permitting support, design of pollution control systems, and compliance services regarding air pollutant standards and hazardous air pollutant emission limits from industrial boilers.
High Technology Manufacturing
We provide our core services for a variety of high tech manufacturing and test facilities, particularly for clients in the automotive and industrial industries. Typical automotive projects range from conceptual design and feasibility studies to complete design-build programs of aero-acoustic wind tunnels, engine test facilities, acoustic enclosures, transmission test stands; powertrain, environmental, emissions, altitude, and electromagnetic compatibility test facilities; in-line and end-of-line component test stands; and computer-based measurement and control systems. We also serve advanced technology and research facilities, including facilities supporting research in fusion and fission energy, nanoscale materials, and high-powered lasers and X-rays to support important research activities in the U.S., Europe, and the U.K.
In addition, we perform projects for clients operating in the semiconductor industry. Projects in the semiconductor industry are typically more complex than many other commercial facilities, requiring a greater emphasis on cleanroom and similar high-end technologies. Our projects range from on-site plant engineering and tool hookups to multi-million dollar state-of-the-art wafer fabrication and crystal growing facilities used to produce solar energy cells, microprocessors for computers, and other consumer electronic devices.
Food, Beverage, and Consumer Products
As a provider to the entire food, beverage, and consumer products supply chain, our global presence and capabilities allow us to help our clients with targeted expansion and new investments. Our food processing services include hygienic design, clean-in-place ("CIP") systems, heat transfer systems, material handling of liquids and solids, refrigeration, and compliance with government requirements. From facility design to raw materials processing to converting, packaging, and distribution, our vast depth of expertise helps our clients do just that. Our knowledge of food and beverage processing results in plants that are productive, efficient, and economical.
Backlog
Backlog represents the total dollar amount of revenues we expect to record in the future as a result of performing work under contracts that have been awarded to us. With respect to O&M contracts, however, we include in backlog the amount of revenues we expect to receive for only one succeeding year, regardless of the remaining life of the contract. For national government programs (other than U.S. federal O&M contracts), our policy is to include in backlog the full contract award, whether funded or unfunded, excluding option periods. In accordance with industry practice, substantially all of our contracts are subject to cancellation, termination, or suspension at the discretion of the client. In addition, the contracts in our backlog are subject to changes in the scope of services to be provided as well as adjustments to the costs relating to the contracts. Accordingly, backlog is not necessarily indicative of our future revenues or earnings.

Page14

Table of Contents

Our backlog includes expected revenues for contracts that are based on estimates. For information regarding our backlog including those risk factors specific to backlog, please refer to Item 1A — Risk Factors, and Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations, below.

Significant Customers
The following table sets forth the percentage of total revenues earned directly or indirectly from agencies of the U.S. federal government for each of the last five fiscal years: 
2012
 
2011
 
2010
 
2009
 
2008
22.1
%
 
24.4
%
 
25.4
%
 
20.3
%
 
16.8
%
It is uncommon for a commercial customer to contribute 10% or more of the Company’s total revenues. On occasion, however, we will perform a number of field services projects for a single customer in the same fiscal year which, primarily because of the amount of pass-through costs (discussed below) that is included in revenue, will cause total revenue from that customer to exceed 10% of total consolidated revenues. For the fiscal year ended October 2, 2009 revenues earned from Motiva Enterprises LLC accounted for 12.2% of total consolidated revenues.
Financial Information About Geographic Areas
Selected financial information regarding the geographic areas in which we operate is included in Note 14 — Segment Information of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K and is incorporated herein by reference.
Contracts
While there is considerable variation in the pricing provisions of the contracts we undertake, our contracts generally fall into two broad categories: cost-reimbursable and fixed-price. The following table sets forth the percentages of total revenues represented by these types of contracts for each of the last five fiscal years:
 
 
 
2012
 
2011
 
2010
 
2009
 
2008
Cost-reimbursable
 
85%
 
84%
 
87%
 
86%
 
88%
Fixed-price
 
15%
 
16%
 
13%
 
14%
 
12%
In accordance with industry practice, most of our contracts (including those with the U.S. federal government) are subject to termination at the discretion of the client, which is discussed in greater detail in Item 1A — Risk Factors. In such situations, our contracts typically provide for reimbursement of costs incurred and payment of fees earned through the date of termination.
When we are directly responsible for engineering, design, procurement, and construction of a project or the maintenance of a client’s plant or facility, we reflect the costs of materials, equipment, and subcontracts in both revenues and costs. On other projects, where the client elects to pay for such items directly and we have no associated responsibility for such items, these amounts are not reflected in either revenues or costs. The following table sets forth the approximate amount of such pass-through costs included in revenues for each of the last five fiscal years (in millions of dollars):
 
2012
 
2011
 
2010
 
2009
 
2008
$
2,328.4

 
$
2,118.5

 
$
2,723.3

 
$
4,017.0

 
$
3,517.4

Cost-Reimbursable Contracts
Cost-reimbursable contracts generally provide for reimbursement of costs incurred plus an amount of profit. The profit element may be in the form of a simple mark-up applied to the labor costs incurred or it may be in the form of a fee, or a combination of a mark-up and a fee. The fee element can also take several forms. The fee may be a fixed amount; it may be an amount based on a percentage of the costs incurred; or it may be an incentive fee based on targets, milestones, or performance factors defined in the contract. In general, we prefer cost-reimbursable contracts because we believe the primary reason for awarding a contract to us should be our technical expertise and professional qualifications rather than price.

Page15

Table of Contents

Fixed-Price Contracts
Fixed-price contracts include both “lump sum bid” contracts and “negotiated fixed-price” contracts. Under lump sum bid contracts, we typically bid against other contractors based on specifications the client furnishes. This type of pricing presents certain inherent risks, including the possibility of ambiguities in the specifications received, problems with new technologies, and economic and other changes that may occur over the contract period. Additionally, it is not unusual for lump sum bid contracts to lead to an adversarial relationship with clients, which is contrary to our relationship-based business model. Accordingly, lump sum bid contracts are not our preferred form of contract. In contrast, under a negotiated fixed-price contract, we are selected as the contractor first and then we negotiate a price with our client. Negotiated fixed-price contracts frequently exist in single-responsibility arrangements where we perform some portion of the work before negotiating the total price of the project. Thus, although both types of contracts involve a firm price for the client, the lump sum bid contract provides the greater degree of risk to us. However, because of economies that may be realized during the contract term, both negotiated fixed-price and lump sum bid contracts may offer greater profit potential than other types of contracts. Over the past five years, most of our fixed-price work has been either negotiated fixed-price contracts or lump sum bid contracts for project services, rather than turn-key construction.
Competition
For information regarding the competitive conditions in our business, please refer to Item 1A—Risk Factors, below.
Employees
At September 28, 2012, we had approximately 48,600 full-time, staff employees (including contract staff). Additionally, as of September 28, 2012, there were approximately 14,800 persons employed in the field on a project basis. The number of field employees varies in relation to the number and size of the maintenance and construction projects in progress at any particular time.
Executive Officers of the Registrant
The information required by Paragraph (a), and Paragraphs (c) through (g) of Item 401 of Regulation S-K (except for information required by Paragraph (e) of that Item to the extent the required information pertains to our executive officers) and Item 405 of Regulation S-K is hereby incorporated by reference from our definitive proxy statement to be filed with the SEC pursuant to Regulation 14A within 120 days after the close of our fiscal year.
The following table presents the information required by Paragraph (b) of Item 401 of Regulation S-K.
 
 
 
 
 
 
Year Joined the
Name
 
Age
 
Position with the Company
 
Registrant
Craig L. Martin
 
62

 
President, Chief Executive Officer and Director
 
1994
Thomas R. Hammond
 
61

 
Executive Vice President, Operations
 
1975
George A. Kunberger, Jr.
 
60

 
Executive Vice President, Global Sales
 
1979
Gregory J. Landry
 
64

 
Executive Vice President, Operations
 
1984
Joseph G. Mandel
 
52

 
Executive Vice President, Operations
 
2011
John W. Prosser, Jr.
 
67

 
Executive Vice President, Finance and Administration and Treasurer
 
1974
Cora L. Carmody
 
55

 
Senior Vice President, Information Technology
 
2008
Nazim G. Thawerbhoy
 
65

 
Senior Vice President and Controller
 
1979
All of the officers listed in the preceding table serve in their respective capacities at the pleasure of the Board of Directors and, with the exception of Mr. Mandel and Ms. Carmody, have served in executive and senior management capacities with the Company for more than five years.
Prior to joining Jacobs in 2008, Ms. Carmody served as the Chief Information Officer for SAIC Inc., a large provider of scientific, engineering, systems integration and technical services and solutions, from August 2003 to April 2008. Mr. Mandel joined the Company in February 2011 through the acquisition of the Aker Entities. Mr. Mandel served in various senior management roles with Aker Solutions ASA since first joining them in 1995.
 

Page16

Table of Contents

Available Information
You may read and copy any materials we file with the SEC at the SEC’s Public Reference Room located at 100 F Street N.E., Washington, D.C., 20549. In order to obtain information about the operation of the Public Reference Room, a person may call the SEC at 1-800-732-0330. The SEC also maintains a site on the Internet that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The SEC’s website is http://www.sec.gov. You may also read and download the various reports we file with, or furnish to, the SEC free of charge from our website, http://www.jacobs.com.
 

Page17

Table of Contents

Item 1A.    RISK FACTORS
We operate in a changing environment that involves numerous known and unknown risks and uncertainties that could materially adversely affect our business, financial condition, and results of operations. The risks described below highlight some of the factors that have affected and could affect us in the future. We may also be affected by unknown risks or risks that we currently think are immaterial. If any such events actually occur, our business, financial condition, and results of operations could be materially adversely affected.
Construction and maintenance sites are inherently dangerous workplaces. If we fail to maintain safe work sites, we can be exposed to significant financial losses as well as civil and criminal liabilities.
Construction and maintenance sites often put our employees and others in close proximity with large pieces of mechanized equipment, moving vehicles, chemical and manufacturing processes, and highly regulated materials. On many sites we are responsible for safety and, accordingly, must implement safety procedures. If we fail to implement such procedures or if the procedures we implement are ineffective, our employees and others may become injured. Unsafe work sites also have the potential to increase employee turnover, increase the cost of a project to our clients, and raise our operating costs. Any of the foregoing could result in financial losses, which could have a material adverse impact on our business, financial condition, and results of operations.
In addition, our projects can involve the handling of hazardous and other highly regulated materials, which, if improperly handled or disposed of, could subject us to civil and criminal liabilities. We are also subject to regulations dealing with occupational health and safety. Although we maintain functional groups whose primary purpose is to ensure we implement effective health, safety, and environmental (“HSE”) work procedures throughout our organization, including construction sites and maintenance sites, the failure to comply with such regulations could subject us to liability.
Our safety record is critical to our reputation. Many of our clients require that we meet certain safety criteria to be eligible to bid for contracts and many contracts provide for automatic termination or forfeiture of some or all of our contract fees or profit in the event we fail to meet certain measures. As a result, our failure to maintain adequate safety standards could result in reduced profitability or the loss of projects or clients, and could have a material adverse impact on our business, financial condition, and results of operations.
Negative conditions in the credit and financial markets could impair our ability to operate our business, implement our acquisition strategy, or access our cash and short-term investments; it could also adversely affect our customers’ businesses.
Although we finance much of our operations using cash provided by operations, at times we depend on the availability of credit to grow our business and to help fund business acquisitions. In addition, some of our clients depend on the availability of credit to help finance their capital projects. Due to the continuing instability of the credit markets in the U.S. and abroad, the availability of credit has continued to be relatively difficult or expensive to obtain in spite of government efforts to stabilize the credit markets. This situation could make it more difficult or more expensive for us to access funds, refinance our existing indebtedness, enter into agreements for new indebtedness, or obtain funding through the issuance of securities or such additional capital may not be available on terms acceptable to us. In addition, these market conditions could negatively impact our clients’ ability to fund their projects and, therefore, utilize our services, which could have a material adverse impact on our business, financial condition, and results of operations.
In addition, we are subject to the risk that the counterparties to our credit agreements may go bankrupt if they suffer catastrophic demand on their liquidity that will prevent them from fulfilling their contractual obligations to us. We also routinely enter into contracts with counterparties including vendors, suppliers, and subcontractors that may be negatively impacted by events in the credit markets. If those counterparties are unable to perform their obligations to us or our clients, we may be required to provide additional services or make alternate arrangements on less favorable terms with other parties to ensure adequate performance and delivery of services to our clients. These circumstances could also lead to disputes and litigation with our partners or clients, which could have a material adverse impact on our reputation, business, financial condition, and results of operations.
In addition, we typically bill our clients for our services in arrears and are, therefore, subject to our clients delaying or failing to pay our invoices. In weak economic environments, we may experience increased delays and failures due to, among other reasons, a diminution in our clients’ access to the credit markets. If one or more clients delays in paying or fail to pay us a significant amount of our outstanding receivables, it could have a material adverse impact on our liquidity, financial condition, and results of operations.
Furthermore, our cash balances and short-term investments are maintained in accounts held by major banks and

Page18

Table of Contents

financial institutions located primarily in North America, Europe, South America, Australia and Asia. Some of our accounts hold deposits in amounts that exceed available insurance. Although none of the financial institutions in which we hold our cash and investments have gone into bankruptcy or forced receivership, or have been seized by their governments, there is a risk that this may occur in the future. If this were to occur, we would be at risk of not being able to access our cash which may result in a temporary liquidity crisis that could impede our ability to fund operations.
Our vulnerability to the cyclical nature of the markets in which our clients operate is exacerbated during economic downturns.
We provide technical, professional, construction, and O&M services to clients operating in a number of markets including oil and gas exploration, production, and refining; programs for various national governments, including the U.S. federal government; chemicals and polymers; mining and minerals; pharmaceuticals and biotechnology; infrastructure; buildings; power; and other, general industrial and consumer businesses and markets (such as technology and manufacturing; pulp and paper; and food and consumer products). These markets and the resulting demand for our services have been, and we expect will continue to be, cyclical and subject to significant fluctuations due to a variety of factors beyond our control, including economic conditions and changes in client spending, particularly during periods of economic uncertainty.
Current global economic conditions have negatively impacted many of our clients’ ability and willingness to fund their projects. They have also caused our clients to reduce their capital expenditures, alter the mix of services purchased, seek more favorable price and other contract terms, and otherwise slow their spending on our services. For example, in the public sector, declines in state tax revenues as well as other economic declines may result in lower state and local government spending. In addition, due to these conditions many of our competitors may be more inclined to take greater or unusual risks or accept terms and conditions in contracts that we might not deem acceptable. These conditions have reduced the demand for our services, which has had a significant negative impact on our business and results of operations.
Current economic conditions also make it extremely difficult for our clients, our vendors, and us to accurately forecast and plan future business activities and could cause businesses to continue to slow spending on our services. We cannot predict the timing, strength or duration of any economic slowdown or subsequent economic recovery worldwide or in our clients’ markets. In addition, our business has traditionally lagged recoveries in the general economy and, therefore, may not recover as quickly as the economy at large. A continuation or worsening of current weak economic conditions or a reduction in government spending could have a material adverse impact on our business, financial condition, and results of operations.
Regardless of economic or market conditions, investment decisions by our customers may vary by location or as a result of other factors like the availability of labor or relative construction cost. Because we are dependent on the timing and funding of new awards, we are therefore vulnerable to changes in our clients’ markets and investment decisions. As a result, our past results have varied and may continue to vary depending upon the demand for future projects in the markets and the locations in which we operate.
Fluctuations in commodity prices may affect our customers’ investment decisions and therefore subject us to risks of cancellation, delays in existing work, or changes in the timing and funding of new awards.
Commodity prices can affect our customers in a number of ways. For example, for those customers that produce commodity products such as oil, gas, copper, or fertilizers, fluctuations in price can have a direct effect on their profitability and cash flow and, therefore, their willingness to continue to invest or make new capital investments. To the extent commidity prices decline and our customers defer new investments or cancel or delay existing projects, the demand for our services decreases, which may have a material adverse impact on our business, financial condition, and results of operations.
Commodity prices can also strongly affect the costs of projects. Rising commodity prices can negatively impact the potential returns on investments that are planned, as well as those in progress, and result in customers deferring new investments or canceling or delaying existing projects. Cancellations and delays have affected our past results and may continue to do so in significant and unpredictable ways and could have a material adverse impact on our business, financial condition, and results of operations.
 
Our continued success is dependent upon our ability to hire, retain, and utilize qualified personnel.
The success of our business is dependent upon our ability to hire, retain, and utilize qualified personnel, including engineers, architects, designers, craft personnel, and corporate management professionals who have the required experience and expertise. From time to time, it may be difficult to attract and retain qualified individuals with the expertise and in the timeframe demanded by our clients. In certain geographic areas, for example, we may not be able to satisfy the demand for our services because of our inability to successfully hire and retain qualified personnel.

Page19

Table of Contents

In addition, as some of our key personnel approach retirement age, we need to have appropriate succession plans in place and to successfully implement such plans. If we cannot attract and retain qualified personnel or effectively implement appropriate succession plans, it could have a material adverse impact on our business, financial condition, and results of operations.
The cost of providing our services, including the extent to which we utilize our workforce, affects our profitability. For example, the uncertainty of contract award timing can present difficulties in matching our workforce size with our contracts. If an expected contract award is delayed or not received, we could incur cost resulting from excess staff, reductions in staff, or redundancy of facilities that could have a material adverse impact on our business, financial conditions, and results of operations.
The outcome of pending and future claims and litigation could have a material adverse impact on our business, financial condition, and results of operations.
We are a party to litigation in the normal course of business. Since we engage in engineering and construction activities for large facilities and projects where design, construction or systems failures can result in substantial injury or damage to employees or others, we are exposed to substantial claims and litigation if there is a failure at any such project. Such claims could relate to, among other things, personal injury, loss of life, business interruption, property damage, pollution, and environmental damage and be brought by our clients or third parties, such as those who use or reside near our clients’ projects. We can also be exposed to claims if we agreed that a project will achieve certain performance standards or satisfy certain technical requirements and those standards or requirements are not met. In many of our contracts with clients, subcontractors, and vendors, we agree to retain or assume potential liabilities for damages, penalties, losses, and other exposures relating to projects that could result in claims that greatly exceed the anticipated profits relating to those contracts. In addition, while clients and subcontractors may agree to indemnify us against certain liabilities, such third parties may refuse or be unable to pay us.
We maintain insurance coverage for various aspects of our business and operations. Our insurance programs have varying coverage limits and maximums, and insurance companies may seek to deny claims we might make. In addition, we have elected to retain a portion of losses that may occur through the use of various deductibles, limits, and retentions under these programs. As a result, we may be subject to future liability for which we are only partially insured, or completely uninsured. Our insurers are also subject to business risk and, as a result, one or more of them may be unable to fulfill their insurance obligations due to insolvency or otherwise.
In addition, the nature of our business sometimes results in clients, subcontractors, and vendors presenting claims to us for, among other things, recovery of costs related to certain projects. Similarly, we occasionally present change orders and other claims to our clients, subcontractors, and vendors. If we fail to document properly the nature of our claims and change orders or are otherwise unsuccessful in negotiating reasonable settlements with our clients, subcontractors, and vendors, we could incur cost overruns, reduced profits or, in some cases, a loss for a project. A failure to promptly recover on these types of claims could have a material adverse impact on our liquidity and financial results. Additionally, irrespective of how well we document the nature of our claims and change orders, the cost to prosecute and defend claims and change orders can be significant.
Litigation and regulatory proceedings are subject to inherent uncertainties and unfavorable rulings can and do occur. Pending or future claims against us could result in professional liability, product liability, criminal liability, warranty obligations, and other liabilities which, to the extent we are not insured against a loss or our insurer fails to provide coverage, could have a material adverse impact on our business, financial condition, and results of operations.
Contracts with the U.S. federal government and other governments and their agencies pose additional risks relating to future funding and compliance.
Contracts with the U.S. federal government and other governments and their agencies, which are a significant source of our revenue and profit, are subject to various uncertainties, restrictions, and regulations including oversight audits by various government authorities as well as cost controls. Government contracts are also exposed to uncertainties associated with funding. Contracts with the U.S. federal government, for example, are subject to the uncertainties of Congressional funding. Governments are typically under no obligation to maintain funding at any specific level, and funds for government programs may even be eliminated.
As a result, our government clients may reduce the scope or terminate our contracts for convenience or decide not to renew our contracts with little or no prior notice. Since government contracts represent a significant percentage of our revenues

Page20

Table of Contents

(for example, those with the U.S. federal government represented approximately 22.1% of our total revenue in fiscal 2012), a significant reduction in government funding or the loss of such contracts could have a material adverse impact on our business, financial condition, and results of operations. If the U.S. federal government is unable to agree on a budget by the end of 2012 and the terms of the Budget Control Act of 2011 go into effect, it may have a material adverse impact on our business with the U.S. federal government and could potentially cause a more general recession in the U.S.
Most government contracts are awarded through a rigorous competitive process. The U.S. federal government has increasingly relied upon multiple-year contacts with multiple contractors that generally require those contractors to engage in an additional competitive bidding process for each task order issued under a contract. This process may result in us facing significant additional pricing pressure and uncertainty and incurring additional costs. Moreover, we may not be awarded government contracts because of existing policies designed to protect small businesses and under-represented minorities. Our inability to win new contracts or be awarded work under existing contracts could have a negative impact on our business and results of operations.
In addition, government contracts are subject to specific procurement regulations and a variety of other socio-economic requirements, which affects how we transact business with our clients and, in some instances, impose additional costs on our business operations. For example, for contracts with the U.S. federal government, we must comply with the Federal Acquisition Regulation, the Truth in Negotiations Act, the Cost Accounting Standards, the Service Contract Act, and numerous regulations governing security, environmental protection, and employment practices. Government contracts also contain terms that expose us to heightened levels of risk and potential liability than non-government contracts. This includes, for example, unlimited indemnification obligations.
We also are subject to government audits, investigations, and proceedings. For example, government agencies such as the U.S. Defense Contract Audit Agency routinely review and audit us to determine the adequacy of and our compliance with our internal control systems and policies and whether allowable costs are in accordance with applicable regulations. These audits can result in a determination that a rule or regulation has been violated or that adjustments are necessary to the amount of contract costs we believe are reimbursable by the agencies and the amount of our overhead costs allocated to the agencies.
If we violate a rule or regulation, fail to comply with a contractual or other requirement or do not satisfy an audit, a variety of penalties can be imposed including monetary damages and criminal and civil penalties. In addition, any or all of our government contracts could be terminated, we could be suspended or debarred from all government contract work, or payment of our costs could be disallowed. For example, in so-called "qui tam" actions brought by individuals or the government under the U.S. Federal False Claims Act or under similar state and local laws, treble damages can be awarded. The occurrence of any of these actions could harm our reputation and could have a material adverse impact on our business, financial condition, and results of operations.
Many of our federal government contracts require us to have security clearances, which can be difficult and time consuming to obtain. If our employees are unable to obtain or retain the necessary securities clearances, our clients could terminate or not renew existing contracts or award us new contracts. To the extent this occurs, our operations and results of operations could be negatively impacted.
We bear the risk of cost overruns in fixed-price contracts. We may experience reduced profits or, in some cases, losses under these contracts if costs increase above our estimates.
For fiscal 2012, approximately 15.0% of our revenues were earned under contracts that were fixed-price in nature. For these contracts, we bear the risk of paying some, if not all, of any cost overruns. Fixed-price contract amounts are established in part on cost and scheduling estimates that are based on a number of assumptions, including those about future economic conditions, prices and availability of labor, equipment and materials, and other exigencies. If these estimates prove inaccurate, there are errors or ambiguities as to contract specifications, or if circumstances change due to, among other things, unanticipated technical problems, difficulties in obtaining permits or approvals, changes in local laws or labor conditions, weather delays, changes in the costs of raw materials, or our vendors’ or subcontractors’ inability to perform, then cost overruns may occur and we could experience reduced profits or, in some cases, a loss for that project. If the project is significant, or there are one or more issues that impact multiple projects, costs overruns could have a material adverse impact on our business, financial condition, and results of operations.

Page21

Table of Contents

The contracts in our backlog may be adjusted, cancelled or suspended by our clients and, therefore, our backlog is not necessarily indicative of our future revenues or earnings. Additionally, even if fully performed, our backlog may not be a good indicator of our future gross margins.
As of the end of fiscal 2012, our backlog totaled approximately $15.9 billion. There is no assurance that backlog will actually be realized as revenues in the amounts reported or, if realized, will result in profits. In accordance with industry practice, substantially all of our contracts are subject to cancellation, termination, or suspension at the discretion of the client. In addition, the contracts in our backlog are subject to changes in the scope of services to be provided as well as adjustments to the costs relating to the contracts. The revenue for certain contracts included in backlog are based on estimates. Projects can remain in backlog for extended periods of time because of the nature of the project and the timing of the particular services required by the project. The risk of contracts in backlog being cancelled or suspended generally increases during periods of wide-spread economic slowdowns.
Additionally, the way we perform on our individual contracts can affect greatly our gross margins and hence, future profitability. In some markets, there is a continuing trend towards cost-reimbursable contracts with incentive-fee arrangements. Typically, our incentive fees are based on such things as achievement of target completion dates or target costs, overall safety performance, overall client satisfaction, and other performance criteria. If we fail to meet such targets or achieve the expected performance standards, we may receive a lower, or even zero, incentive fee resulting in lower gross margins. Accordingly, there is no assurance that the contracts in backlog, assuming they produce the revenues currently expected, will generate gross margins at the rates we have realized in the past.
Our use of joint ventures and partnerships exposes us to risks and uncertainties, many of which are outside of our control.
As is common in the industry, we perform certain contracts as a member of joint ventures, partnerships, and similar arrangements. This situation exposes us to a number of risks, including the risk that our partners may be unable to fulfill their obligations to us or our clients. Our partners may also be unable or unwilling to provide the required levels of financial support to the partnerships. If these circumstances occur, we may be required to pay financial penalties or liquidated damages, provide additional services, or make additional investments to ensure adequate performance and delivery of the contracted services. Under agreements with joint and several liabilities, we could be liable for both our obligations and those of our partners. These circumstances could also lead to disputes and litigation with our partners or clients, all of which could have a material adverse impact on our reputation, business, financial condition, and results of operations.
We participate in joint ventures and similar arrangements in which we are not the controlling partner. In these cases, we have limited control over the actions of the joint venture. These joint ventures may not be subject to the same requirements regarding internal controls and internal control over financial reporting that we follow. To the extent the controlling partner makes decisions that negatively impact the joint venture or internal control problems arise within the joint venture, it could have a material adverse impact on our business, financial condition, and results of operations.
The failure by a joint venture partner to comply with applicable laws, regulations or client requirements could negatively impact our business and, for government clients, could result in fines, penalties, suspension or even debarment being imposed on us, which could have material adverse impact on our business, financial condition, and results of operations.
We are dependent on third parties to complete many of our contracts.
Much of the work performed under our contracts is performed by third-party subcontractors we hire. We also rely on third-party equipment manufacturers or suppliers to provide much of the equipment and materials used for projects. If we are unable to hire qualified subcontractors or find qualified equipment manufacturers or suppliers, our ability to successfully complete a project could be impaired. If we are not able to locate qualified third-party subcontractors or the amount we are required to pay for subcontractors or equipment and supplies exceeds what we have estimated, especially in a lump-sum or a fixed-price contract, we may suffer losses on these contracts. If a subcontractor, supplier, or manufacturer fails to provide services, supplies or equipment as required under a contract for any reason, we may be required to source these services, equipment or supplies to other third parties on a delayed basis or on less favorable terms, which could impact contract profitability. In the current economic environment, third parties may find it difficult to obtain sufficient financing to help fund their operations. The inability to obtain financing could adversely affect a third party’s ability to provide materials, equipment or services which could have a material adverse impact on our business, financial condition, and results of operations. In addition, a failure by a third party subcontractor, supplier or manufacturer to comply with applicable laws, regulations or client requirements could negatively impact our business and, for government clients, could result in fines, penalties, suspension or even debarment being imposed on us, which could have material adverse impact on our business, financial condition, and results of operations.

Page22

Table of Contents

Maintaining adequate bonding and letter of credit capacity is necessary for us to successfully bid on and win some contracts.
In line with industry practice, we are often required to provide performance or payment bonds to our customers. These bonds indemnify the customer should we fail to perform our obligations under the contract. If a bond is required for a particular project and we are unable to obtain an appropriate bond, we cannot pursue that project.
Historically, we have had adequate bonding and letter of credit capacity but, as is typically the case, the issuance of a bond is at the surety’s sole discretion and the issuance of a letter of credit is based on the Company's credit worthiness. Because of an overall lack of worldwide bonding capacity, we may find it difficult to find sureties who will provide required levels of bonding or such bonding may only be available at significant additional cost. There can be no assurance that our bonding capacity will continue to be available to us on reasonable terms. Our inability to obtain adequate bonding and, as a result, to bid on new contracts that require such bonding could have a material adverse impact on our business, financial condition, results of operations, and cash flows.
If we fail to comply with federal, state, local or foreign governmental requirements, our business may be adversely affected.
We are subject to U.S. federal, state, local and foreign laws and regulations that affect our business. For example, we are subject to a variety of environmental, health, and safety laws and regulations governing, among other things, discharges to air and water, the handling, storage, and disposal of hazardous or waste materials and the remediation of contamination associated with the releases of hazardous substances and human health and safety. These laws and regulations and the risk of attendant litigation can cause significant delays to a project and add significantly to its cost. Violations of these regulations could subject us and our management to civil and criminal penalties and other liabilities.
Various U.S. federal, state, local, and foreign environmental laws and regulations may impose liability for property damage and costs of investigation and cleanup of hazardous or toxic substances on property currently or previously owned by us or arising out of our waste management or environmental remediation activities. These laws may impose responsibility and liability without regard to knowledge of or causation of the presence of contaminants. The liability under these laws is joint and several. We have potential liabilities associated with our past waste management and other activities and with our current and prior ownership of various properties. The discovery of additional contaminants or the imposition of unforeseen clean-up obligations at these or other sites could have a material adverse impact on our financial condition and results of operations.
When we perform our services, our personnel and equipment may be exposed to radioactive and hazardous materials and conditions. We may be subject to liability claims by employees, customers, and third parties as a result of such exposures. In addition, we may be subject to fines, penalties or other liabilities arising under environmental or safety laws. A claim, if not covered by insurance, could have a material adverse impact on our results of operations and financial condition.
Such laws, regulations and policies are reviewed periodically and any changes could affect us in substantial and unpredictable ways. Such changes could, for example, relax or repeal laws and regulations relating to the environment, which could result in a decline in the demand for our environmental services and, in turn, could negatively impact our revenue. Our failure to comply with such laws or regulations, whether actual or alleged, could expose us to fines, penalties or potential litigation liabilities, including costs, settlements and judgments, any of which could adversely affect our business, financial condition and results of operations.
In addition, we and many of our clients operate in highly regulated environments, which may require us or our clients to obtain, and to comply with, federal, state, and local government permits and approvals. Any of these permits or approvals may be subject to denial, revocation or modification under various circumstances. Failure to obtain or comply with, or the loss or modification of, the conditions of permits or approvals may subject us to penalties or other liabilities, which could have a material adverse impact on our business, financial condition, and result of operations.
Our global operations require importing and exporting goods and technology across international borders. Although we have policies and procedures to comply with U.S. and foreign international trade laws, the violation of such laws could subject the Company and its employees to civil or criminal penalties, including substantial monetary fines, or other adverse actions including denial of import or export privileges, and could damage our reputation and therefore, our ability to do business.
Employee, agent or partner misconduct or our overall failure to comply with laws or regulations could weaken our ability to win contracts, which could result in reduced revenues and profits.
Misconduct, fraud, non-compliance with applicable laws and regulations, or other improper activities by one of our

Page23

Table of Contents

employees, agents or partners could have a significant negative impact on our business and reputation. Such misconduct could include the failure to comply with government procurement regulations, regulations regarding the protection of classified information, regulations prohibiting bribery and other corrupt practices, regulations regarding the pricing of labor and other costs in government contracts, regulations on lobbying or similar activities, regulations pertaining to the internal controls over financial reporting, environmental laws, and any other applicable laws or regulations. For example, we routinely provide services that may be highly sensitive or that relate to critical national security matters; if a security breach were to occur, our ability to procure future government contracts could be severely limited. The precautions we take to prevent and detect these activities may not be effective, and we could face unknown risks or losses. Our failure to comply with applicable laws or regulations or acts of misconduct could subject us to fines and penalties, loss of security clearance, and suspension or debarment from contracting, which could weaken our ability to win contracts and result in reduced revenues and profits and could have a material adverse impact on our business, financial condition, and results of operations.
We could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act and similar worldwide anti-bribery laws.
The U.S. Foreign Corrupt Practices Act (“FCPA”), the U.K. Bribery Act of 2010, and similar anti-bribery laws in other jurisdictions generally prohibit companies and their intermediaries from making improper payments for the purpose of obtaining or retaining business. Our policies mandate compliance with these anti-bribery laws. We operate in many parts of the world that have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. Despite our training and compliance programs, there is no assurance that our internal control policies and procedures will protect us from acts committed by our employees or agents. If we are found to be liable for FCPA or other violations (either due to our own acts or our inadvertence, or due to the acts or inadvertence of others), we could suffer from civil and criminal penalties or other sanctions, which could have a material adverse impact on our business, financial condition, and results of operations.
The loss of or a significant reduction in business from one or a few customers could have an adverse impact on us.
A few clients have in the past and may in the future account for a significant portion of our revenue and/or backlog in any one year or over a period of several consecutive years. For example, in fiscal 2012, 2011, and fiscal 2010, approximately 22.1%, 24.4%, and 25.4%, respectively, of our revenue was earned directly or indirectly from agencies of the U.S. federal government. Although we have long-standing relationships with many of our significant clients, our clients may unilaterally reduce, delay, or cancel their contracts at any time. Our loss of or a significant reduction in business from a significant client could have a material adverse impact on our business, financial condition, and results of operations.
We engage in a highly competitive business. If we are unable to compete effectively, we could lose market share and our business and results of operations could be negatively impacted.
We face intense competition to provide technical, professional, and construction services to clients. The extent of such competition varies by industry, geographic market, and project type. For example, with respect to our construction and operations and maintenance services, clients generally award large projects to large contractors, which may give our larger competitors an advantage when bidding for these projects. Conversely, with respect to our engineering, design, architectural, and consulting services, low barriers of entry can result in competition with smaller, newer competitors. If we are unable to compete effectively, we may experience a loss of market share or reduced profitability or both, which if significant, could have a material adverse impact on our business, financial condition, and results of operations.
Our larger competitors for engineering, construction, and maintenance services for process plants include Bechtel, Fluor, Foster Wheeler, KBR, Technip, WorleyParsons, the Shaw Group, and AMEC. In the area of buildings, our competitors include several of the competitors previously mentioned as well as HDR, HOK, AECOM, and Turner. In the area of infrastructure, our competitors include several of the competitors previously mentioned as well as URS, Parsons Brinckerhoff, HNTB, Tetra Tech, Parsons, and W.S. Atkins. In the area of national government programs, our principal competitors include several of the competitors listed above as well as SAIC, CH2M Hill, Weston, Lockheed Martin, and Computer Sciences Corporation.
In addition to the risks discussed elsewhere in Risk Factors, our international operations are also exposed to additional risks and uncertainties including unfavorable political developments and weak foreign economies.
For fiscal 2012, approximately 38.0% of our revenues was earned from clients outside the U.S. Our business is dependent on the continued success of our international operations, and we expect our international operations to continue to account for a significant portion of our total revenues. At a minimum, our reported financial condition and results of operations

Page24

Table of Contents

are exposed to the effects (both positive and negative) that fluctuating exchange rates have on the process of translating the financial statements of our international operations, which are denominated in currencies other than the U.S. dollar, into the U.S. dollar. In addition, our international operations are subject to a variety of risks, including:
 
Recessions and other economic crises in other regions, such as Europe, or specific foreign economies and the impact on our costs of doing business in those countries;
Difficulties in staffing and managing foreign operations, including logistical and communication challenges;
Unexpected changes in foreign government policies and regulatory requirements;
Lack of developed legal systems to enforce contractual rights;
Renegotiation or nullification of our existing contracts;
The adoption of new, and the expansion of existing, trade or other restrictions;
Embargoes;
Acts of war, civil unrest, force majeure, and terrorism;
The ability to finance efficiently our foreign operations;
Social, political, and economic instability;
Expropriation of property;
Tax increases;
Limitations on the ability to repatriate foreign earnings; and
U.S. government policies.
The lack of a well-developed legal system in some of these countries may make it difficult to enforce our contractual rights. In addition, military action or continued unrest, particularly in the Middle East, could impact the supply or pricing of oil, disrupt our operations in the region and elsewhere. To the extent our international operations are affected by unexpected or adverse economic, political and other conditions, our business, financial condition, and results of operations may be adversely affected.
 
Foreign exchange risks may affect our ability to realize a profit from certain projects.
While we generally attempt to denominate our contracts in the currencies of our expenditures, we do enter into contracts that expose us to currency risk, particularly to the extent contract revenue is denominated in a currency different than the contract costs. We attempt to minimize our exposure from currency risks by obtaining escalation provisions for projects in inflationary economies or entering into derivative (hedging) instruments, when there is currency risk exposure that is not naturally mitigated via our contracts. These actions, however, may not always eliminate currency risk exposure. Based on fluctuations in currency, the U.S. dollar value of our backlog may from time to time increase or decrease significantly. We may also be exposed to limitations on our ability to reinvest earnings from operations in one country to fund the financing requirements of our operations in other countries.

Our business strategy relies in part on acquisitions to sustain our growth. Acquisitions of other companies present certain risks and uncertainties.
Our business strategy involves growth through, among other things, the acquisition of other companies. Acquiring companies presents a number of risks, including:
Assumption of liabilities of an acquired business, including liabilities that were unknown at the time the acquisition was negotiated;
Valuation methodologies may not accurately capture the value of the acquired business;
Failure to realize anticipated benefits, such as cost savings and revenue enhancements;
Difficulties relating to combining previously separate entities into a single, integrated, and efficient business;
The effects of diverting management’s attention from day-to-day operations to matters involving the integration of acquired companies;
Potentially substantial transaction costs associated with business combinations;
Potential impairment resulting from the overpayment for an acquisition;

Page25

Table of Contents

Difficulties relating to assimilating the personnel, services, and systems of an acquired business and to assimilating marketing and other operational capabilities;
Increased burdens on our staff and on our administrative, internal control and operating systems, which may hinder our legal and regulatory compliance activities; and
Difficulties in applying and integrating our system of internal controls to an acquired business.
While we often obtain indemnification rights from the sellers of acquired businesses, such rights may be difficult to enforce, the losses may exceed any dedicated escrow funds, and the indemnitors may not have ability to financially support the indemnity.
In addition, there is no assurance that we will continue to locate suitable acquisition targets or that we will be able to consummate any such transactions on terms and conditions acceptable to us. The credit markets may make it more difficult and costly to finance acquisitions. Acquisitions may also bring us into businesses we have not previously conducted and expose us to additional business risks that are different than those we have traditionally experienced.
In the event we issue stock as consideration for certain acquisitions we may make, we could dilute share ownership.
One method of acquiring companies or otherwise funding our corporate activities is through the issuance of additional equity securities. Accordingly, we filed a shelf registration statement on Form S-4 on December 7, 2007. If we issue additional equity securities pursuant to this shelf registration statement or otherwise, such issuances could have the effect of diluting our earnings per share as well as our existing shareholders’ individual ownership percentages in the Company.
Our quarterly results may fluctuate significantly, which could have a material negative effect on the price of our common stock.
Our quarterly operating results may fluctuate significantly, which could have a material negative effect on the price of our common stock, because of a number of factors, including:
Fluctuations in the spending patterns of our government and commercial customers;
The number and significance of projects executed during a quarter;
Unanticipated changes in contract performance, particularly with contracts that have funding limits;
The timing of resolving change orders, requests for equitable adjustments, and other contract adjustments;
Delays incurred in connection with a project;
Changes in prices of commodities or other supplies;
Weather conditions that delay work at project sites;
The timing of expenses incurred in connection with acquisitions or other corporate initiatives;
Natural disasters or other crises, such as the hurricanes affecting oil-producing regions like the Gulf of Mexico;
Staff levels and utilization rates;
Changes in prices of services offered by our competitors; and
General economic and political conditions.
Our actual results could differ from the estimates and assumptions used to prepare our financial statements.
In preparing our financial statements, our management is required under U.S. GAAP to make estimates and assumptions as of the date of the financial statements. These estimates and assumptions affect the reported values of assets, liabilities, revenue, and expenses and disclosure of contingent assets and liabilities. Areas requiring significant estimates by our management include:
Recognition of contract revenue, costs, profit or losses in applying the principles of percentage of completion accounting;
Estimated amounts for expected project losses, warranty costs, contract close-out or other costs;
Recognition of recoveries under contract change orders or claims;
Collectability of billed and unbilled accounts receivable and the need and amount of any allowance for doubtful accounts;

Page26

Table of Contents

The amount of reserves necessary for self-insured risks;
Accruals for estimated liabilities, including litigation reserves;
Valuation of assets acquired, and liabilities, goodwill, and intangible assets assumed, in acquisitions;
Valuation of stock-based compensation; and
The determination of liabilities under pension and other post-retirement benefit programs.
Our actual business and financial results could differ from our estimates of such results, which could have a material negative impact on our financial condition and results of operations.
An impairment charge of goodwill could have a material adverse impact on our financial condition and results of operations.
Under U.S. GAAP, we are required to test goodwill carried in our Consolidated Balance Sheets for possible impairment on an annual basis based upon a fair value approach. As of September 28, 2012, we had $2.0 billion of goodwill, representing 29.4% of our total assets of $6.8 billion. We have chosen to perform our annual impairment reviews of goodwill at the end of the third quarter of our fiscal year. We also are required to test goodwill for impairment between annual tests if events occur or circumstances change that would more likely than not reduce our enterprise fair value below its book value. These events or circumstances could include a significant change in the business climate, including a significant sustained decline in a reporting unit’s market value, legal factors, operating performance indicators, competition, sale or disposition of a significant portion of our business, potential government actions toward our facilities, and other factors.
If the fair value of our reporting units is less than their carrying value, we could be required to record an impairment charge. The amount of any impairment could be significant and could have a material adverse impact on our financial condition and results of operations for the period in which the charge is taken. For a further discussion of goodwill impairment testing, please see Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations below.

We may be required to contribute additional cash to meet any underfunded benefit obligations associated with retirement and post-retirement benefit plans we manage.

We have various employee benefit plan obligations that require us to make contributions to satisfy, over time, our underfunded benefit obligations, which are generally determined by calculating the projected benefit obligations minus the fair value of plan assets. For example, as of September 28, 2012 and September 30, 2011, our defined benefit pension and post-retirement benefit plans were projected to be underfunded by $463.7 million and $421.0 million, respectively. See Note 7—Pension Plans of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K for additional disclosure. In the future, our benefit plan obligations may increase or decrease depending on changes in the levels of interest rates, pension plan asset performance and other factors. If we are required to contribute a significant amount of the deficit for underfunded benefit plans, our cash flows could be materially and adversely affected.

Rising inflation, interest rates, and/or construction costs could reduce the demand for our services as well as decrease our profit on our existing contracts, in particular with respect to our fixed-price contracts.
Rising inflation, interest rates, or construction costs could reduce the demand for our services. In addition, we bear all of the risk of rising inflation with respect to those contracts that are fixed-price. Because a significant portion of our revenues are earned from cost-reimbursable type contracts (approximately 85.0% during fiscal 2012), the effects of inflation on our financial condition and results of operations over the past few years have been generally minor. However, if we expand our business into markets and geographic areas where fixed-price and lump-sum work is more prevalent, inflation may have a larger impact on our results of operations in the future. Therefore, increases in inflation, interest rates or construction costs could have a material adverse impact on our business, financial condition, and results of operations.
We may be affected by market or regulatory responses to climate change.
Growing concerns about climate change may result in the imposition of additional environmental regulations. For example, there is a growing consensus that new and additional regulations may be enacted concerning, among other things, greenhouse gas emissions could result in increased compliance costs for us and our clients. Legislation, international protocols, regulation or other restrictions on emissions could also affect our clients, including those who are involved in the exploration, production or refining of fossil fuels. Such changes could increase the costs of projects for our clients or, in some cases, prevent a project from going forward, thereby potentially reducing the need for our services, which would in turn have a material adverse impact on our business, financial condition, and results of operations. However, these changes could also

Page27

Table of Contents

increase the pace of projects, such as carbon capture or storage projects, that could have a positive impact on our business. We cannot predict when or whether any of these various proposals may be enacted or what their effect will be on us or on our customers.
Our effective tax rate may increase or decrease.
We are subject to income taxes in the U.S. and numerous foreign jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes. In the ordinary course of our business, there are many transactions and calculations where the ultimate tax determination is uncertain. We are regularly under audit by tax authorities. Although we believe that our tax estimates and tax positions are reasonable, they could be materially affected by many factors including the final outcome of tax audits and related litigation, the introduction of new tax accounting standards, legislation, regulations, and related interpretations, our global mix of earnings, the realizability of deferred tax assets and changes in uncertain tax positions. An increase or decrease in our effective tax rate could have a material adverse impact on our financial condition and results of operations.
Systems and information technology interruption could adversely impact our ability to operate.
We rely heavily on computer, information, and communications technology and related systems in order to properly operate our business. From time to time, we experience occasional system interruptions and delays. In the event we are unable to regularly deploy software and hardware, effectively upgrade our systems and network infrastructure, and take other steps to maintain or improve the efficiency and efficacy of our systems, the operation of such systems could be interrupted or result in the loss, corruption, or release of data. In addition, our computer and communication systems and operations could be damaged or interrupted by natural disasters, telecommunications failures, acts of war or terrorism, computer viruses, physical or electronic security breaches, intentional or inadvertent user misuse or error, or similar events or disruptions. Any of these or other events could cause interruptions, delays, loss of critical and/or sensitive data or similar effects, which could have a material adverse impact on our business, financial condition, protection of intellectual property, and results of operations, as well as those of our clients.
We may not be able to protect our intellectual property or that of our clients.
Our technology and intellectual property provide us, in many instances, with a competitive advantage. Although we protect our property through patent registrations, license restrictions, and similar mechanisms, we may not be able to successfully preserve our rights and they could be invalidated, circumvented, challenged or become obsolete. In addition, the laws of some foreign countries in which we operate do not protect intellectual property rights to the same extent as the U.S. If we are unable to protect and maintain our intellectual property rights or if there are any successful intellectual property challenges or infringement proceedings against us, our ability to differentiate our service offerings could be reduced. In addition, our clients or other third parties may also provide us with their technology and intellectual property. There is a risk we may not sufficiently protect our or their information from improper use or dissemination and, as a result, could be subject to claims and litigation and resulting liabilities, loss of contracts or other consequences that could have an adverse impact on our business, financial condition, and results of operations.
We are subject to professional standards, duties and statutory obligations on professional reports and opinions we issue, which could subject us to monetary damages.
We issue reports and opinions to clients based on our professional engineering expertise as well as our other professional credentials that subject us to professional standards, duties and obligations regulating the performance of our services. For example, we issue opinions and reports to government clients in connection with securities offerings. If a client or another third party alleges that our report or opinion is incorrect or it is improperly relied upon and we are held responsible, we could be subject to significant monetary damages.
Delaware law and our charter documents may impede or discourage a takeover or change of control.
We are a Delaware corporation. Certain anti-takeover provisions of the Delaware general corporation law impose restrictions on the ability of others to acquire control of us. In addition, certain provisions of our charter documents may impede or discourage a takeover. For example:
Our Board of Directors is divided into three classes serving staggered three-year terms;
Only our Board of Directors can fill vacancies on the board;
There are various restrictions on the ability of a shareholder to nominate a director for election; and
Our Board of Directors can authorize the issuance of preference shares.

Page28

Table of Contents

These types of provisions, as well as our ability to adopt a shareholder rights agreement in the future, could make it more difficult for a third party to acquire control of us, even if the acquisition would be beneficial to our shareholders. Accordingly, stockholders may be limited in the ability to obtain a premium for their shares.
 
Item 1B.    UNRESOLVED STAFF COMMENTS
None.

Item 2.
PROPERTIES
Our properties consist primarily of office space within general, commercial office buildings located in major cities primarily in the following countries: United States; Australia; Austria; Belgium; Canada; Chile; China; Finland; France; Germany; Greece; India; Italy; Mexico; Morocco; The Netherlands; Poland; Puerto Rico; Peru; Republic of Ireland; Saudi Arabia; Singapore; Spain; Sweden; United Arab Emirates; and the United Kingdom. Such space is used for operations (providing technical, professional, and other home office services), sales, and administration. Most of our properties are leased. In addition, we own facilities located in Charleston, South Carolina which serve as our principal manufacturing and fabrication site for our modular construction activities. We also have fabrication facilities located in Canada in Pickering, Ontario and Edmonton and Lamont, Alberta. The total amount of space used by us for all of our operations is approximately 7.6 million square feet.
We also lease smaller, project offices located throughout the U.S., the U.K., and in certain other countries. We also rent most of our construction equipment on a short-term basis.

Item 3.
LEGAL PROCEEDINGS
The information required by this Item 3 is included in Note 11 — Contractual Guarantees, Litigation, Investigations, and Insurance of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K and is incorporated herein by reference.

PART II
 
Item 5.
MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Jacobs’ common stock is listed on the NYSE and trades under the symbol JEC. We provided to the NYSE, without qualification, the required annual certification of our Chief Executive Officer regarding compliance with the NYSE’s corporate governance listing standards. The following table sets forth the low and high sales prices of a share of our common stock during each of the fiscal quarters presented, based on the NYSE Composite Price History: 
 
 
Low Sales
Price
 
High Sales
Price
Fiscal 2012:
 
 
 
 
First quarter
 
$
30.74

 
$
43.10

Second quarter
 
40.53

 
48.17

Third quarter
 
33.61

 
45.00

Fourth quarter
 
36.07

 
43.90

Fiscal 2011:
 
 
 
 
First quarter
 
$
37.39

 
$
47.97

Second quarter
 
44.92

 
55.73

Third quarter
 
40.53

 
51.84

Fourth quarter
 
31.69

 
43.96

Shareholders
According to the records of our transfer agent, there were 1,330 shareholders of record as of November 15, 2012.

Page29

Table of Contents

Dividends
Our policy is to use cash flows from operations to fund future growth, pay down debt, and, subject to market conditions, repurchase common stock under a stock buy-back program approved by our Board of Directors. Accordingly, we have not paid a cash dividend since fiscal 1984. Although our Board of Directors periodically reviews and considers the merits of paying cash dividends and buying back shares of our common stock, we currently have no plans to pay cash dividends or repurchase our common stock in the foreseeable future.

Performance Graph
The following graph and table shows the changes over the past five-year period in the value of $100 invested at the end of fiscal 2007 in (1) the common stock of Jacobs Engineering Group Inc., (2) the Standard & Poor’s 500 Index, and (3) the Dow Jones Heavy Construction Group Index. The values of each investment are based on share price appreciation, with reinvestment of all dividends, provided any were paid. The investments are assumed to have occurred at the beginning of the period presented. The stock performance included in this graph is not necessarily indicative of future stock price performance.
 
 
 
2007
 
2008
 
2009
 
2010
 
2011
 
2012
Jacobs Engineering Group Inc.
 
100.00

 
71.86

 
60.80

 
51.20

 
42.72

 
53.49

S&P 500
 
100.00

 
78.02

 
72.63

 
80.01

 
80.93

 
105.37

Dow Jones US Heavy Construction
 
100.00

 
64.03

 
60.74

 
57.43

 
50.23

 
66.25

Note: The above information was provided by Research Data Group, Inc.



Page30

Table of Contents

Item 6.
SELECTED FINANCIAL DATA
The following table presents selected financial data for each of the last five fiscal years. This selected financial data should be read in conjunction with the Consolidated Financial Statements and related notes beginning on page F-1 of this Annual Report on Form 10-K. Amounts are presented in thousands, except for per share information and ratios:

 
 
2012 (a)
 
2011
 
2010 (b)
 
2009
 
2008
Results of Operations:
 
 
 
 
 
 
 
 
 
 
Revenues
 
$
10,893,778

 
$
10,381,664

 
$
9,915,517

 
$
11,467,376

 
$
11,252,159

Net earnings attributable to Jacobs
 
378,954

 
331,029

 
245,974

 
399,854

 
420,742

Financial Position:
 
 
 
 
 
 
 
 
 
 
Current ratio
 
2.07 to 1

 
1.53 to 1

 
2.23 to 1

 
2.17 to 1

 
1.74 to 1

Working capital
 
$
1,865,025

 
$
1,099,308

 
$
1,527,589

 
$
1,522,548

 
$
1,173,237

Current assets
 
3,612,077

 
3,157,353

 
2,767,042

 
2,818,449

 
2,750,234

Total assets
 
6,839,433

 
6,049,428

 
4,683,917

 
4,428,614

 
4,278,238

Cash
 
1,032,457

 
905,633

 
938,842

 
1,033,619

 
604,420

Long-term debt
 
528,260

 
2,042

 
509

 
737

 
55,675

Total Jacobs stockholders’ equity
 
3,722,473

 
3,312,988

 
2,859,048

 
2,625,913

 
2,245,147

Return on average equity
 
10.77
%
 
10.73
%
 
8.97
%
 
16.42
%
 
20.58
%
Backlog:
 
 
 
 
 
 
 
 
 
 
Technical professional services
 
$
10,266,500

 
$
9,100,100

 
$
7,588,900

 
$
8,209,300

 
$
8,085,200

Field services
 
5,643,200

 
5,189,700

 
5,613,100

 
7,010,100

 
8,611,400

Total
 
$
15,909,700

 
$
14,289,800

 
$
13,202,000

 
$
15,219,400

 
$
16,696,600

Per Share Information:
 
 
 
 
 
 
 
 
 
 
Basic earnings per share
 
$
2.97

 
$
2.63

 
$
1.98

 
$
3.26

 
$
3.47

Diluted earnings per share
 
2.94

 
2.60

 
1.96

 
3.21

 
3.38

Stockholders’ equity
 
28.65

 
25.93

 
22.71

 
21.14

 
18.30

Average Number of Shares of
   Common Stock and Common
   Stock Equivalents Outstanding
   (Diluted)
 
128,692

 
127,235

 
125,790

 
124,534

 
124,357

Common Shares Outstanding
   at Year End
 
129,936

 
127,785

 
125,909

 
124,230

 
122,701

 
(a)
Includes a one-time, after-tax gain of $4.0 million, or $0.03 per diluted share, related to the sale of the Company's intellectual property for iron ore pelletizing and certain other related assets.

(b)
Includes non-recurring, after-tax charges totaling $60.3 million, or $0.48 per diluted share, relating to the SIVOM Judgment (refer to Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations, below, for a description of this matter and its effects on the Company’s fiscal 2010 Consolidated Financial Statements, as well as for a reconciliation to the Company’s fiscal 2010 consolidated results of operations in accordance with U.S. GAAP).



Page31

Table of Contents

Item 7.
MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Critical Accounting Policies
In order to understand better the changes that occur to key elements of our financial condition, results of operations, and cash flows, a reader of this Management’s Discussion and Analysis (“MD&A”) should be aware of the critical accounting policies we apply in preparing our consolidated financial statements.
The consolidated financial statements contained in this report were prepared in accordance with U.S. GAAP. The preparation of our consolidated financial statements and the financial statements of any business performing long-term engineering and construction-type contracts requires management to make certain estimates and judgments that affect both the entity’s results of operations and the carrying values of its assets and liabilities. Although our significant accounting policies are described in Note 2 – Significant Accounting Policies of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K, the following discussion is intended to highlight and describe those accounting policies that are especially critical to the preparation of our consolidated financial statements.
Revenue Accounting for Contracts and Use of Joint Ventures—In general, we recognize revenues at the time we provide services. Depending on the commercial terms of the contract, we recognize revenues either when costs are incurred, or using the percentage-of-completion method of accounting by relating contract costs incurred to date to the total estimated costs at completion. This method of revenue recognition requires us to prepare estimates of costs to complete contracts in progress as of the balance sheet dates. In making such estimates, judgments are required to evaluate the possible effects of variances in schedule; the costs of materials and labor; productivity; and the impact of change orders, liability claims, contract disputes, and achievement of contractual performance standards. Many of our engineering and construction contracts provide for reimbursement of costs plus a fixed or percentage fee. For contracts containing incentive fee arrangements, fees are frequently based on achievement of target completion dates, target costs, and/or other performance criteria. Failure to meet these targets or increases in contract costs can result in unrealized incentive fees or non-recoverable costs, which could exceed revenues recognized from the project.
We provide for contract losses in their entirety in the period they become known, without regard to the percentage of completion. For multiple contracts with a single customer we account for each contract separately.
The nature of our business sometimes results in clients, subcontractors or vendors presenting claims to us for recovery of costs they incurred in excess of what they expected to incur, or for which they believe they are not contractually responsible. In those situations where a claim against us may result in additional costs to the contract, we include in the total estimated costs of the contract (and therefore, the estimated amount of margin to be earned under the contract) an estimate, based on all relevant facts and circumstances available, of the additional costs to be incurred. Similarly, and in the normal course of business, we may present claims to our clients for costs we have incurred for which we believe we are not contractually responsible. In those situations where we have presented such claims to our clients, we include in revenues the amount of costs incurred, without profit, to the extent it is probable that the claims will result in additional contract revenue, and the amount of such additional revenue can be reliably estimated. Costs associated with unapproved change orders are included in revenues using substantially the same criteria used for claims.
Certain cost-reimbursable contracts with government customers as well as certain commercial clients provide that contract costs are subject to audit and adjustment. In this situation, revenues are recorded at the time services are performed based upon the amounts we expect to realize upon completion of the contracts. In those situations where an audit indicates that we may have billed a client for costs that are not allowable under the terms of the contract, we estimate the amount of such nonbillable costs and adjust our revenues accordingly.
As is common to the industry, we execute certain contracts jointly with third parties through various forms of joint ventures and consortiums. Although the joint ventures own and hold the contracts with the clients, the services required by the contracts are typically performed by us and our joint venture partners, or by other subcontractors under subcontracting agreements with the joint ventures. The assets of our joint ventures, therefore, consist almost entirely of cash and receivables (representing amounts due from clients), and the liabilities of our joint ventures consist almost entirely of amounts due to the joint venture partners (for services provided by the partners to the joint ventures under their individual subcontracts) and other subcontractors. In general, at any given time, the equity of our joint ventures represents the undistributed profits earned on contracts the joint ventures hold with clients. Very few of our joint ventures have employees. None of our joint ventures have third-party debt or credit facilities. Our joint ventures, therefore, are simply mechanisms used to deliver engineering and construction services to clients. Rarely do they, in and of themselves, present any risk of loss to us or to our partners separate

Page32

Table of Contents

from those that we would carry if we were performing the contract on our own. Under U.S. GAAP, our share of losses associated with the contracts held by the joint ventures, if and when they occur, has always been reflected in our Consolidated Financial Statements.
In evaluating the Company's joint ventures (also referred to as "variable interest entities", or "VIEs") for accounting and consolidation purposes, we perform a qualitative analysis to determine whether or not the Company has a “controlling financial interest” in the VIE. The Company is deemed to have a controlling financial interest in a VIE if it has (i) the power to direct the activities of the VIE that most significantly impact the VIEs economic performance; and (ii) the right to receive benefits, or obligation to absorb losses, that could potentially be significant to the VIE. In making our qualitative analysis, the Company assesses each VIE to determine those activities that most significantly impact the VIE's economic performance and whether the Company, another entity, or multiple entities have the power to direct those activities.
 If we determine that we have the power to direct those activities of the VIE that most significantly impact its financial performance and have the right or obligation to receive benefits or absorb losses that could potentially be significant to the VIE, then we are the primary beneficiary of the VIE and we consolidate the VIE. If we determine that we do not have the power to direct the most significant activities of the VIE or power is shared by two or more unrelated parties, then we are not the primary beneficiary and we do not consolidate the VIE.
For the Company's unconsolidated joint ventures, we use the equity method of accounting. The Company does not currently participate in any significant VIEs in which it has a controlling financial interest. There were no changes in facts and circumstances in the period that caused the Company to reassess the method of accounting for its VIEs.
Accounting for Stock Issued to Employees and Others— We measure the cost of employee services received in exchange for an award of equity instruments based on the estimated grant-date fair value of the award. We estimate the fair value of stock options granted to employees and directors using the Black-Scholes option-pricing model. Like all option-pricing models, the Black-Scholes models require the use of highly subjective assumptions including (i) the expected volatility of the market price of the underlying stock, and (ii) the expected term of the award, among others. Accordingly, changes in assumptions and any subsequent adjustments to those assumptions can cause drastically different fair values to be assigned to our stock option awards. For restricted stock units containing service and performance conditions with measures external to the Company, compensation expense is based on the fair value of such units determined using Monte Carlo Simulations. Due to the uncertainties inherent in the use of assumptions and the results of applying Monte Carlo Simulations, the amount of expense recorded in the accompanying consolidated financial statements may not be representative of the effects on our future consolidated financial statements because equity awards tend to vest over several years and additional equity awards may be made in the future.
Accounting for Pension Plans— The accounting for pension plans requires the use of assumptions and estimates in order to calculate periodic pension cost and the value of the plans’ assets and liabilities. These assumptions include discount rates, investment returns, and projected salary increases, among others. The actuarial assumptions used in determining the funded statuses of the plans are provided in Note 7 – Pension Plans of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K.
The expected rates of return on plan assets for fiscal 2013 range from 2.4% to 8.5%; this compares to a range of 2.7% to 7.5% for fiscal 2012. We believe the range of rates selected for fiscal 2013 reflects the long-term returns expected on the plans’ assets, considering recent market conditions, projected rates of inflation, the diversification of the plans’ assets, and the expected real rates of market returns. The discount rates used to compute plan liabilities were changed from a range of 2.6% to 5.9% in fiscal 2011 to a range of 0.6% to 8.4% in fiscal 2012. These assumptions represent the Company’s best estimate of the rates at which its pension obligations could be effectively settled.
Changes in the actuarial assumptions often have a material affect on the values assigned to plan assets and liabilities, and the associated pension expense. For example, if the discount rate used to value the net pension benefit obligation (“PBO”) at September 28, 2012 was higher (lower) by 0.5%, the PBO would have been lower (higher) at that date by approximately $100.8 million for non-U.S. plans, and by approximately $24.4 million for U.S. plans. If the expected return on plan assets was higher (lower) by 1.0%, the net periodic pension cost for fiscal 2013 would be lower (higher) by approximately $8.9 million for non-U.S. plans, and by approximately $3.5 million for U.S. plans. Differences between actuarial assumptions and actual performance (i.e., actuarial gains and losses) that are not recognized as a component of net periodic pension cost in the period in which such differences arise are recorded to accumulated other comprehensive income (loss) and are recognized as part of net periodic pension cost in future periods in accordance with U.S. GAAP. Management monitors trends in the marketplace within which our pension plans operate in an effort to assure the fairness of the actuarial assumptions used.
 

Page33

Table of Contents

Contractual Guarantees, Litigation, Investigations, and Insurance— In the normal course of business, we are subject to certain contractual guarantees and litigation. The guarantees to which we are a party generally relate to project schedules and plant performance. Most of the litigation in which we are involved has us as a defendant in workers’ compensation; personal injury; environmental; employment/labor; professional liability; and other similar lawsuits. We maintain insurance coverage for various aspects of our business and operations. We have elected, however, to retain a portion of losses that occur through the use of various deductibles, limits, and retentions under our insurance programs. This situation may subject us to some future liability for which we are only partially insured, or completely uninsured, and we intend to mitigate any such future liability by continuing to exercise prudent business judgment in negotiating the terms and conditions of our contracts.
In accordance with U.S. GAAP, we record in our Consolidated Balance Sheets amounts representing our estimated liability relating to such guarantees, litigation, and insurance claims. We include any adjustments to such liabilities in our consolidated results of operations.
In addition, as a contractor providing services to the U.S. federal government and several of its agencies, we are subject to many levels of audits, investigations, and claims by, or on behalf of, the U.S. federal government with respect to contract performance, pricing, costs, cost allocations, and procurement practices. We adjust revenues based upon the amounts we expect to realize considering the effects of any client audits or governmental investigations.
Testing Goodwill for Possible Impairment— The goodwill carried in our Consolidated Balance Sheets is tested annually for possible impairment. In performing the annual impairment test, we evaluate our goodwill at the reporting unit level. We have determined that we have two reporting units, which are based on geography. We refer to these reporting units internally as “Europe” and “Non-Europe”. Each of our reporting units conducts the business activities described elsewhere in this 2012 Form 10-K, which includes providing professional technical services such as design, engineering, and architectural services; construction and/or construction management services; and maintenance and operations services.
Our geography-based reporting units reflect the Company’s organizational structure, which is based predominately on geography, as well as our acquisition strategy, which favors acquisition targets that, among other things, provide access to new geographic areas. Our reporting units represent rational groupings into which substantially all of our major acquisitions (which are responsible for the goodwill appearing in our consolidated balance sheet) have been assimilated, and where all of the operations under each reporting unit share in the benefits of the goodwill created by our acquisitions.
U.S. GAAP does not prescribe a specific valuation method for estimating the fair value of reporting units. The valuation technique used to estimate the fair value of the reporting units requires the use of significant estimates and assumptions, including revenue growth rates, operating margins, discount rates and future market conditions, among others.
For fiscal years 2011 and 2010 , we used a market approach for valuing our reporting units. Under this method, the fair value of our reporting units was estimated by multiplying their respective after-tax earnings for the trailing twelve months by the Company’s overall average market earnings multiple.
The key inputs used in the valuation model were the after-tax earnings of our reporting units and the Company’s market-driven average earnings multiple. The multiples used for fiscal 2011 and 2010 were approximately 18 and 14, respectively.
For fiscal year 2012, we used both an income approach and a market approach to test our goodwill for possible impairment. Such approaches require us to make estimates and judgments. Under the income approach, fair vale is determined by using the discounted cash flows of our reporting units. Under the market approach, the fair value of our reporting units is determined by reference to guideline companies that are reasonably comparable to our reporting units; the fair values are estimated based on the valuation multiples of the invested capital associated with the guideline companies. In assessing whether there is an indication that the carrying value of goodwill has been impaired, we utilize the results of both valuation techniques and consider the range of fair values indicated. The fair values for each reporting unit exceeded the respective book values by over 30%. The key assumptions used to determine the fair value of our reporting units in our testing were:
Income Approach
Company financial projections for fiscal years 2012 to 2015
Weighted average cost of capital of 12%
Residual period growth rate of 3%


Page34

Table of Contents

Market Approach
With respect to the market approach, the Company used multiples ranging from 6.2 to 8.0 of EBITDA (generally, earnings before interest, taxes, depreciation, and amortization), and from 7.3 to 9.6 for EBIT (generally, earnings before interest and taxes) for guideline publicly traded companies reasonably comparable to the Company's reporting units applied to the trailing twelve months results of operations for each of our reporting units.
It is possible that changes in market conditions, economy, facts and circumstances, judgments, and assumptions used in estimating the fair value could change, resulting in possible impairment of goodwill in the future. The fair values resulting from the valuation technique used are not necessarily representative of the values we might obtain in a sale of the reporting units to willing third parties.
The Company performs the annual goodwill impairment test for the reporting units in the third quarter of our fiscal year. The Company will test goodwill for impairment between annual tests if an event occurs or circumstances change that would more likely than not reduce the fair value of a reporting unit below its carrying amount. We have determined that the fair value of our reporting units substantially exceeded their respective carrying values for fiscal years 2012, 2011 and 2010.
Based on the most recent results of our annual impairment tests, there were no indications of impairment of the goodwill shown in our Consolidated Balance Sheets at either September 28, 2012 or September 30, 2011.

 
Fiscal 2012 — Overview
The Company’s net earnings increased $47.9 million, or 14.5%, from $331.0 million for fiscal 2011 to $379.0 million for fiscal 2012. Included in net earnings for fiscal 2012 is a one-time, after-tax gain of $4.0 million, or $0.03 per diluted share, related to the sale of the Company's intellectual property for iron ore pelletizing and other related assets ("pelletizing gain"). The sale was completed in the fourth quarter of fiscal 2012. Excluding the pelletizing gain, the Company's net earnings for fiscal 2012 grew 13.3% from the prior year.
Although any fiscal 2012 information that excludes the pelletizing gain is non-U.S. GAAP, we use such information in this MD&A because Management believes such information provides a better point of reference for assessing the Company’s current financial performance and operating trends.
In spite of the difficult economic environment that continued to plague many of the end-markets that we serve, the Company was able to grow net earnings by 13.3% and revenues by 4.9% from the prior year. This growth was facilitated by increased activity across several of the major markets in which our clients operate, including the hydrocarbons business (refining and upstream oil and gas), chemicals and polymers, mining and minerals, and pharmaceuticals and biotechnology. This growth occurred principally within the technical, professional services areas of our business.
Backlog at September 28, 2012 increased $1.62 billion, or 11.3%, to $15.91 billion. Backlog at September 28, 2012 includes new awards from clients operating in the Chemicals and Polymers, Oil & Gas - Upstream, and Mining and Minerals industries and markets.
 

Page35

Table of Contents

Results of Operations
General
Our business focuses exclusively on providing technical professional services and field services to a large number of industrial, commercial, and governmental clients around the world. The services we provide generally fall into four broad categories:
Project services (which includes engineering, design, architectural, interiors, planning, and similar services);
Process, Scientific, and Systems Consulting services (which include a wide variety of services performed in connection with scientific testing, analysis, and consulting activities, as well as information technology, and systems engineering and integration activities);
Construction services (which encompasses traditional field construction services as well as modular construction activities, and includes direct-hire construction and construction management services); and
Operations and Maintenance services (which include services performed in connection with operating large, complex facilities on behalf of clients, as well as services involving process plant and facilities maintenance).
The scope of services we can provide our clients, therefore, ranges from consulting and conceptual design services (which are often required by clients in the very early stages of a project) to complete single-responsibility, design-build contracts, to services required in the post start-up phases of a project such as maintenance and operations services.
The following table sets forth our revenues by type of service for each of the last three fiscal years (in thousands):
 
 
 
2012
 
2011
 
2010
Technical Professional
Services revenues:
 
 
 
 
 
 
Project Services
 
$
5,693,419

 
$
5,070,575

 
$
4,224,898

Process, Scientific, and
Systems Consulting
 
772,031

 
815,561

 
888,405

Total Technical Professional
Services revenues
 
6,465,450

 
5,886,136

 
5,113,303

Field Services revenues:
 
 
 
 
 
 
Construction
 
3,145,311

 
3,060,820

 
3,722,101

Operations and Maintenance
(“O&M”)
 
1,283,017

 
1,434,708

 
1,080,113

Total Field Services
revenues
 
4,428,328

 
4,495,528

 
4,802,214

 
 
$
10,893,778

 
$
10,381,664

 
$
9,915,517


Page36

Table of Contents

We focus our services on clients operating in select industry groups and markets. We believe these industry groups and markets have sufficient common needs to permit cross-utilization of our resources. The following table sets forth our revenues by these industry groups and markets for each of the last three fiscal years (in thousands):
 
 
 
2012
 
2011
 
2010
Refining – Downstream
 
$
2,379,750

 
$
2,256,092

 
$
2,876,059

National Government Programs
 
2,272,611

 
2,313,240

 
2,314,548

Chemicals and Polymers
 
1,704,723

 
1,461,125

 
1,203,373

Infrastructure
 
1,085,649

 
1,219,633

 
938,978

Buildings
 
843,938

 
893,528

 
869,248

Oil & Gas – Upstream
 
790,546

 
753,471

 
559,492

Pharmaceuticals and Biotechnology
 
576,303

 
404,687

 
589,795

Mining & Minerals
 
550,134

 
449,194

 
26,161

Industrial and Other
 
690,124

 
630,694

 
537,863

 
 
$
10,893,778

 
$
10,381,664

 
$
9,915,517

We recorded net earnings of $379 million, or $2.94 per diluted share ($375 million, or $2.91 per diluted share excluding the pelletizing gain), for the fiscal year ended September 28, 2012, compared to $331.0 million, or $2.60 per diluted share, for the fiscal year ended September 30, 2011.
Revenues increased $512.1 million, or 4.9%, from $10.38 billion for fiscal 2011 to $10.89 billion for fiscal 2012.
Revenues from clients operating in the Chemicals and Polymers industries increased $243.6 million, or 16.7%, from $1.5 billion for fiscal 2011 to $1.7 billion for fiscal 2012. The effect of shale gas projects and the low price of natural gas had an impact on the chemicals market in fiscal 2012. Because there is now a large source of feedstock available outside refineries which can grow independently of the refining infrastructure, we believe more projects are now economically viable and capital is being deployed to develop these opportunities. Furthermore, our clients are looking at various options to monetize natural gas.
Revenues from clients operating in the Pharmaceutical and Biotechnology markets increased $171.6 million, or 42.4%, from $404.7 million for fiscal 2011 to $576.3 million for fiscal 2012. This increase was due primarily to a number of new and continuing projects, including projects relating to vaccine production facilities. Although we view this market as being steady, we see growth prospects in the areas of biotechnology-based drug development in Europe and North America and for secondary manufacturing expansion in Asia and South America.
Revenues from clients operating in the Refining—Downstream market increased $123.7 million, or 5.5%, from $2.26 billion for fiscal 2011 to $2.38 billion for fiscal 2012. The increase was due primarily to higher business volume principally within the Company's operations in the U.S. and Canada. We believe the level of profits realized by our refinery clients will help drive new capital projects, particularly as refiners assess possible changes in their crude slate and the need to revamp decades-old facilities to meet changing demand and the continuing effects of recent environmental regulations. We believe the Refining - Downstream market will remain strong in fiscal 2013.
Revenues from clients operating in the Mining and Minerals market increased $100.9 million, or 22.5%, from $449.2 million for fiscal 2011 to $550.1 million for fiscal 2012. This increase is due primarily to the inclusion of the revenues of the Aker Entities for all of fiscal 2012, versus only a portion of fiscal 2011. The "Aker Entities" refer to certain businesses that were acquired in separate transactions that were completed in February and April 2011, and which are described in more detail in Note 3—Business Combinations of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K. Although we see opportunities to grow this business in fiscal 2013, our clients in this market have been affected negatively by falling spot prices for iron ore, coking, and thermal coal and weaker commodity prices - albeit these declines have occurred from prices that were generally high from a historical perspective. Further influencing this market is continued European banking instability, the weak U.S. recovery, and a general slowdown in the Chinese economy. Despite this cooling market we believe that we are well positioned to capture additional market share during fiscal 2013, particularly in the area of small-cap projects and maintenance-driven work.
Revenues from clients operating in the Oil and Gas—Upstream market increased $37.1 million, or 4.9%, from $753.5 million for fiscal 2011 to $790.5 million for fiscal 2012. The Canadian oil and gas business continues to improve. The Company anticipates this market to remain strong during fiscal 2013. Projections continue to show a strong oil price forecast

Page37

Table of Contents

which should keep the market moving forward. We also anticipate an increase in our field services activities for clients in this market in fiscal 2013.
National Government Programs revenues for fiscal 2012 remained relatively flat compared to fiscal 2011. We believe that uncertainties associated with sequestration (i.e., that mechanism within the Budget Control Act of 2011 that can trigger automatic U.S. government spending cuts in the event the U.S. Congress and the President fail to to agree on a budget by the end of calendar 2012) caused several agencies to slow the release of work in 2012. We believe the impact to the Company, if any, of sequestration, should it occur, will likely begin in late fiscal 2013. Nevertheless, certain recent changes in government contracting in the U.S. have helped to stabilize this area of our business and may continue to help stabilize it in the future. We have seen an increasing volume of work released by U.S. government agencies in the form of multiple award task order contracts ("MATOC"). These types of awards allow the Company to bid on, and participate in, more government sites than large, single-award contracts. We believe our cost profile makes us very competitive for MATOC-type awards.
Revenues from clients operating in the Buildings market decreased $49.6 million, or 5.5%, from $893.5 million for fiscal 2011 to $844.0 million for fiscal 2012. In general, we see a shift in this industry group towards projects for clients in the private sector; driven by a continuing decline in government spending. Growth in the private sector business is coming from mission critical, education, healthcare, aviation, and corporate and commercial programs and projects. We anticipate continued growth in fiscal 2013.
Direct costs of contracts increased $344.6 million, or 3.9%, from $8.82 billion during fiscal 2011 to $9.17 billion during fiscal 2012. Direct costs of contracts include all costs incurred in connection with and directly for the benefit of client contracts, including depreciation and amortization relating to assets used in connection with providing the services required by client projects. The level of direct costs of contracts may fluctuate between reporting periods due to a variety of factors including the amount of pass-through costs we incur during a period. On those projects where we are responsible for subcontract labor or third-party materials and equipment, we reflect the amounts of such items in both revenues and costs (and we refer to such costs as “pass-through costs”). On other projects, where the client elects to pay for such items directly and we have no associated responsibility for such items, these amounts are not considered pass-through costs and are, therefore, not reflected in either revenues or costs. To the extent that we incur a significant amount of pass-through costs in a period, our direct cost of contracts are likely to increase as well.
Pass-through costs increased $209.9 million, or 9.9%, from $2.12 billion during fiscal 2011 to $2.33 billion for fiscal 2012. In general, pass-through costs are more significant on projects that have a higher content of field services activities. Field services revenues however, decreased $67.2 million, or 1.5%, from $4.50 billion during fiscal 2011 to $4.43 billion during fiscal 2012. Pass-through costs are generally incurred at a specific point in the lifecycle of a project and are highly dependent on the needs of our individual clients and the nature of the clients’ projects. However, because we have hundreds of projects which start at various times within a fiscal year, the effect of pass-through costs on the level of direct costs of contracts can vary between fiscal years without there being a fundamental or significant change to the underlying business.
As a percentage of revenues, direct costs of contracts were 84.1% for fiscal 2012, compared to 85.0% for fiscal 2011. The relationship between direct costs of contracts and revenues will fluctuate between reporting periods depending on a variety of factors including the mix of business during the reporting periods being compared as well as the level of margins earned from the various types of services provided. Generally speaking, the more procurement we do on behalf of our clients (i.e., where we purchase equipment and materials for use on projects, and/or procure subcontracts in connection with projects) and the more field services revenues we have relative to technical, professional services revenues, the higher the ratio will be of direct costs of contracts to revenues. Because revenues from pass-through costs typically have lower margin rates associated with them, it is not unusual for us to experience an increase or decrease in such revenues without experiencing a corresponding increase or decrease in our gross margins and operating profit. The decrease in the ratio of direct costs of contracts to revenues in fiscal 2011 as compared to last year was due primarily to improved margins for our project services (margins relating to our field services were virtually unchanged).
Selling, general, and administrative ("SG&A") expenses for fiscal 2012 increased by $90.3 million, or 8.7%, to $1.13 billion, compared to $1.04 billion for fiscal 2011. These increases were due primarily to the SG&A expenses attributable to acquired businesses.
Operating profit was $596.1 million for the fiscal year ended September 28, 2012, compared to $518.9 million, for the fiscal year ended September 30, 2011. As a percentage of revenues, operating profit was 5.5% for fiscal 2012, compared to 5.0% in fiscal 2011. Improved margins for our Project Services contributed to this increase.
Interest income during fiscal 2012 increased $1.1 million as compared to the prior year. Contributing to this

Page38

Table of Contents

increase was higher average cash balances on deposit in fiscal 2012 as compared to fiscal 2011.
Interest expense for fiscal 2012 increased $2.9 million, as compared to fiscal 2011. Interest expense in both fiscal 2011 and fiscal 2012 was due primarily to the debt incurred in connection with the acquisition of the Aker Entities. The increase is due primarily to the inclusion of interest expense associated with acquisition indebtedness for all of fiscal 2012, versus only a portion of fiscal 2011.
The Company’s consolidated effective income tax rate was 34.1% for fiscal 2012, compared to 35.1% in fiscal 2011. In general, the lower effective tax rate in fiscal 2012 as compared to fiscal 2011 is due to the changing geographical source of our earnings combined with an increase in the utilization of U.S. foreign tax credits. In the normal course of our business, we may engage in numerous transactions for which the ultimate tax outcome (including the period in which the transaction will ultimately be included in income or deducted as an expense) is uncertain. Additionally, we file income, franchise, gross receipts and similar tax returns in many jurisdictions. Our tax returns are subject to audit and investigation by the Internal Revenue Service, most states in the U.S., and by various government agencies representing many jurisdictions outside the U.S. We continually monitor the appropriateness of the rate, and we adjust our income tax expense in the period it is probable that actual results will change.
Fiscal 2011 Compared to Fiscal 2010
The most significant event that affects the comparability of the Company’s consolidated results of operations for fiscal 2011 to fiscal 2010 was the loss recorded last year in connection with the SIVOM Judgment.
During the third quarter of fiscal 2010, we received an unfavorable court judgment relating to a waste incineration project in France for the SIVOM de Mulhousienne (the “SIVOM Judgment”). The SIVOM project was performed by a consortium of contractors that was led by one of our subsidiaries under a contract that was entered into in 1996, prior to our acquisition of that subsidiary. As a result of the judgment, we recorded a pre-tax charge to earnings of approximately $93.3 million. Net of the effects of the charge on the Company’s long-term incentive bonus plan and income taxes, the effect on net earnings attributable to Jacobs for the fiscal year ended October 1, 2010 was approximately $60.3 million, or $0.48 per diluted share.
Because of the unusual nature of the SIVOM Judgment, we include in certain places within this MD&A a discussion of the Company’s consolidated results of operations for fiscal 2011 as it compares to fiscal 2010, both with and without the effects of the SIVOM Judgment. Although any fiscal 2010 information that excludes the effects of the SIVOM Judgment is non-U.S. GAAP, it is presented because Management believes such information provides a better point of reference for assessing the Company’s current financial performance and operating trends.
The following table reconciles the Company’s fiscal 2010 consolidated results of operations presented in accordance with U.S. GAAP to its fiscal 2010 consolidated results of operations excluding the effects of the SIVOM Judgment (in thousands, except earnings per share):
 
Financial Statement Element
 
Results as
Presented
(U.S. GAAP)
 
Effects of the
SIVOM  Judgment
 
Results Before the
Effects of the
SIVOM Judgment
(non-U.S. GAAP)
Revenue
 
$
9,915,517

 
$
(25,894
)
 
$
9,941,411

Direct costs of contracts
 
$
(8,582,912
)
 
$
(58,641
)
 
$
(8,524,271
)
Selling, general, and administrative expenses
 
$
(932,522
)
 
$
6,363

 
$
(938,885
)
Net interest income (expense)
 
$
(5,083
)
 
$
(8,725
)
 
$
3,642

Earnings (loss) before taxes
 
$
391,934

 
$
(86,897
)
 
$
478,831

Income tax (expense) benefit
 
$
(145,647
)
 
$
26,620

 
$
(172,267
)
Net earnings (loss) attributable to Jacobs
 
$
245,974

 
$
(60,277
)
 
$
306,251

Diluted earnings (loss) per share
 
$
1.96

 
$
(0.48
)
 
$
2.44

We recorded net earnings of $331.0 million, or $2.60 per diluted share for the fiscal year ended September 30, 2011, compared to $246.0 million, or $1.96 per diluted share for the fiscal year ended October 1, 2010. Excluding the effects of the SIVOM Judgment, net earnings and earnings per share for fiscal 2010 were $306.3 million and $2.44, respectively.
Revenues increased $466.1 million, or 4.7%, from $9.9 billion for fiscal 2010 to $10.4 billion for fiscal 2011. Revenues from clients operating in the Mining and Minerals markets increased significantly during fiscal 2011 due primarily to

Page39

Table of Contents

the acquisition of the Aker Entities. Revenues from clients for Infrastructure projects increased $280.7 million, or 29.9%, from $939.0 million for fiscal 2010 to $1.2 billion for fiscal 2011. Contributing to this increase were higher Project Services revenues for various transportation projects in the U.S. combined with revenues attributable to the Aker Entities. Revenues from clients operating in the Chemicals & Polymers markets increased $257.8 million, or 21.4%, from $1.2 billion for fiscal 2010 to $1.5 billion for fiscal 2011. Revenues from clients operating in the Oil & Gas – Upstream markets increased $194.0 million, or 34.7%, from $559.5 million for fiscal 2010 to $753.5 million for fiscal 2011. Contributing to this increase were several large, EPC projects performed in North America.
Direct costs of contracts increased $239.3 million, or 2.8%, from $8.6 billion during fiscal 2010 to $8.8 billion during fiscal 2011. Pass-through costs decreased $604.8 million, or 22.2%, from $2.7 billion during fiscal 2010 to $2.1 billion for fiscal 2011. Field services revenues decreased $306.7 million, or 6.4%, from $4.8 billion during fiscal 2010 to $4.5 billion during fiscal 2011.
As a percentage of revenues, direct costs of contracts were 85.0% for fiscal 2011, compared to 86.6% for fiscal 2010. The decrease in the ratio of direct costs of contracts to revenues in fiscal 2011 as compared to last year was due primarily to lower levels of pass-through costs.
SG&A expenses for fiscal 2011 increased by $108.1 million, or 11.6%, to $1.04 billion, compared to $932.5 million for fiscal 2010. The Aker Entities contributed $113.0 million (inclusive of due diligence and integration costs) of SG&A expenses for the fiscal year ended September 30, 2011. Excluding the SG&A expenses of the Aker Entities, SG&A expenses for fiscal 2011 decreased by $4.9 million compared to fiscal 2010. The decrease in SG&A expenses during fiscal 2011 was due primarily to management’s efforts to reduce SG&A expenses.
Operating profit was $518.9 million for the fiscal year ended September 30, 2011, compared to $400.1 million ($478.3 million, before the effects of the SIVOM Judgment), for the fiscal year ended October 1, 2010. As a percentage of revenues, operating profit was 5.0% for fiscal 2011, compared to 4.0% in fiscal 2010 (4.8%, before the effects of the SIVOM Judgment).
Even though the Company maintained significant cash balances during fiscal 2011, the rate of interest earned on our deposits and investments remained low in fiscal 2011.
Interest expense for fiscal 2011 decreased $1.1 million, as compared to fiscal 2010. Excluding the effects of the SIVOM Judgment, interest expense for fiscal 2011 increased $8.8 million as compared to fiscal 2010. The increase in interest expense in fiscal 2011 was due primarily to the debt incurred in connection with the acquisition of the Aker Entities. Interest expense in fiscal 2010 included the reversal of $2.9 million of interest expense that was accrued over a number of years in connection with an income tax matter that was resolved successfully.
The Company’s consolidated effective income tax rate was 35.1% for fiscal 2011, compared to 37.2% in fiscal 2010. The tax rate in fiscal 2011 decreased from fiscal 2010 due to a change in the mix of international work and the successful resolution of a U.S. domestic tax issue.
 

Page40

Table of Contents

Contractual Obligations
The following table sets forth certain information about our contractual obligations as of September 28, 2012 (in thousands):
 
 
 
 
 
Payments Due by Fiscal Period
 
 
Total
 
1 Year
or Less
 
2 - 3
Years
 
4 - 5
Years
 
More than 5
Years
Debt obligations
 
$
528,260

 
$

 
$

 
$
528,260

 
$

Operating leases (a)
 
871,857

 
153,328

 
285,176

 
168,636

 
264,717

Obligations under defined benefit pension
   plans (b)
 
474,555

 
63,065

 
133,799

 
144,717

 
132,974

Obligations under nonqualified deferred
   compensation plans (c)
 
105,806

 
6,100

 
12,941

 
13,997

 
72,768

Purchase obligations (d)
 
1,123,389

 
1,123,389

 

 

 

Interest (e)
 
26,201

 
5,822

 
11,645

 
8,734

 

Total
 
$
3,130,068

 
$
1,351,704

 
$
443,561

 
$
864,344

 
$
470,459

 
(a)
Assumes the Company will make the end of lease term residual value guarantee payment of $38.8 million in 2015 with respect to the lease of an office building in Houston, Texas. Please refer to Note 10—Commitments and Contingencies, and Derivative Financial Instruments of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K.
(b)
Assumes that future contributions will be consistent with amounts projected to be contributed in fiscal 2013, allowing for certain growth based on rates of inflation and salary increases, but limited to the amount recorded as of September 28, 2012. Actual contributions will depend on a variety of factors, including amounts required by local laws and regulations, and other funding requirements.
(c)
Assumes that future payments will be consistent with amounts paid in fiscal 2012, allowing for certain growth. Due to the nonqualified nature of the plans, and the fact that benefits are based in part on years of service, the payments included in the schedule were limited to the amount recorded as of September 28, 2012.
(d)
Represents those liabilities estimated to be under firm contractual commitments as of September 28, 2012; primarily accounts payable and accrued payroll.
(e)
Determined based on borrowings outstanding at the end of fiscal 2012 using the interest rates in effect at that time and concluding with the expiration date of the 2012 Facility.
Backlog
Backlog represents the total dollar amount of revenues we expect to record in the future as a result of performing work under contracts that have been awarded to us. With respect to O&M contracts, however, we include in backlog the amount of revenues we expect to receive for only one succeeding year, regardless of the remaining life of the contract. For national government programs (other than U.S. federal O&M contracts), our policy is to include in backlog the full contract award, whether funded or unfunded, excluding option periods.
The following table summarizes our backlog for each of the last three fiscal years (in millions): 
 
 
2012
 
2011
 
2010
Technical professional services
 
$
10,266.5

 
$
9,100.1

 
$
7,588.9

Field services
 
5,643.2

 
5,189.7

 
5,613.1

Total
 
$
15,909.7

 
$
14,289.8

 
$
13,202.0

The entire value of contract awards are added to backlog when the contracts are awarded to us. Accordingly, backlog can fluctuate from one reporting period to the next due to the timing of when new contracts are added to backlog and when the contract revenue is recognized in our consolidated financial statements. Many of our contracts require us to provide services that span over a number of fiscal quarters (and sometimes over fiscal years). Our backlog at September 28, 2012 increased by$1.6 billion, or 11.3%, to $15.9 billion from $14.3 billion at September 30, 2011. The increase in backlog from September 30, 2011 to September 28, 2012 was due primarily to new awards from clients operating in the Chemicals and Polymers, Oil & Gas—Upstream, and Mining and Minerals industries and markets.

Page41

Table of Contents

In accordance with industry practice, substantially all of our contracts are subject to cancellation or termination at the discretion of the client. In a situation where a client terminates a contract, we would ordinarily be entitled to receive payment for work performed up to the date of termination and, in certain instances, we may be entitled to allowable termination and cancellation costs. There were no significant project cancellations in fiscal 2012.
While management uses all information available to it to determine backlog, our backlog at any given time is subject to changes in the scope of services to be provided as well as increases or decreases in costs relating to the contracts included therein. Accordingly, backlog is not necessarily a reliable indicator of future revenues.
 
Backlog relating to work to be performed either directly or indirectly for the U.S. federal government and its agencies totaled approximately $3.6 billion (or 22.9% of total backlog), $3.6 billion (or 24.9% of total backlog), and $4.3 billion (or 32.6% of total backlog) at September 28, 2012, September 30, 2011, and October 1, 2010, respectively. Most of our federal contracts require that services be provided beyond one year. In general, these contracts must be funded annually (i.e., the amounts to be spent under the contract must be appropriated by the U.S. Congress to the procuring agency, and then the agency must allot these sums to the specific contracts).
Subject to the factors discussed in Item 1A—Risk Factors, above, we estimate that approximately $8.6 billion, or 54.0%, of total backlog at September 28, 2012 will be realized as revenues within the next fiscal year.
Effects of Inflation
The effects of inflation on our business is discussed in Item 1A—Risk Factors, and is incorporated herein by reference.
Liquidity and Capital Resources
At September 28, 2012, our primary sources of liquidity consisted of $1.03 billion of cash and cash equivalents, and $664.6 million of available borrowing capacity under our $1.21 billion unsecured revolving credit facility. We finance as much of our operations and growth as possible through cash generated by our operations.
During fiscal 2012, our cash and cash equivalents increased by $126.8 million from $905.6 million at September 30, 2011 to $1.03 billion at September 28, 2012. This compares to a net decrease in cash and cash equivalents of $33.2 million during the corresponding period last year. During fiscal 2012, our operating activities contributed $299.8 million of cash and cash equivalents and the effects of exchange rate changes added another $10.9 million. These increases in cash flows were offset in part by net cash uses of $181.1 million for investing activities and $2.7 million for financing activities.
Operations provided net cash of $299.8 million during fiscal 2012. This compares to net cash inflows of $236.5 million and $223.6 million during fiscal 2011 and 2010, respectively. The $63.3 million increase in cash provided by operations in fiscal 2012 as compared to fiscal 2011 was due primarily to a $55.7 million increase in net earnings attributable to the Group and a $22.9 million favorable change in the Company's working capital accounts, offset in part by a $16.9 million change relating to deferred income taxes.
Because such a high percentage of our revenues are earned on cost-plus type contracts, and due to the significance of revenues relating to pass-through costs, most of the costs we incur are included in invoices we send to clients. Although we continually monitor our accounts receivable, we manage the operating cash flows of the Company by managing the working capital accounts in total, rather than by the individual elements. The primary elements of the Company’s working capital accounts are accounts receivable, accounts payable, and billings in excess of cost. Accounts payable consists of obligations to third parties relating primarily to costs incurred for projects which are generally billable to clients. Accounts receivable consist of billings to our clients — a substantial portion of which is for project-related costs. Billings in excess of cost consist of billings to and payments from our clients for costs yet to be incurred.
This relationship between revenues and costs, and between receivables and payables is unique to our industry, and facilitates review of our liquidity at the total working capital level. The changes in cash flows relating to our working capital accounts were due simply to the timing of cash receipts and payments within our working capital accounts and is not indicative of any known trend or fundamental change to the underlying business. There were only minor changes within the components of our working capital accounts during fiscal 2012 when compared to fiscal 2011. We still continue to experience delays in certain payments and have seen an increase in the length of payment terms with certain customers. We believe that this situation does not present a significant risk to the Company's cash flows. We believe the risk of not collecting substantially all of the Company's outstanding receivables is remote. Though the Company provides services in a number of countries outside the U.S., we believe our credit risk is not significant. Our private sector customers are comprised principally of large, well

Page42

Table of Contents

known, and well established multi-national companies. Our government customers are comprised of national, state, and local agencies located principally in the U.S. and the U.K. We have not historically experienced significant collection issues with either of our governmental or non-governmental customers. Furthermore, our largest government customer in the U.K. provides advance payments to the Company.
 
We used $181.1 million of cash and cash equivalents for investing activities during fiscal 2012. This compares to $801.8 million and $398.5 million during fiscal 2011 and 2010, respectively. The $620.7 million decrease in cash used for investing activities during fiscal 2012 as compared to fiscal 2011 was due to to a decline in merger and acquisition activity.
Additions to property and equipment totaled $102.6 million, $98.7 million, and $49.1 million for fiscal years 2012, 2011, and 2010, respectively. Included in fiscal 2012 activity are significant expenditures for system software and hardware upgrades (relating principally to the businesses we recently acquired) and leasehold improvements (relating primarily to the consolidation of certain office space in one major market in the U.S., and the expansion of office space in several locations in the U.S. and overseas). Included in the fiscal 2011 activity was a $49.1 million addition to property plant and equipment related to the purchase of an office building we use in our operations and the associated equipment and furniture.
Our financing activities resulted in net cash outflows of $2.7 million during fiscal 2012. This compares to net cash inflows of $556.9 million and $93.1 million during fiscal 2011 and 2010, respectively. The $559.7 million net decrease in cash flows from financing activities during fiscal 2012 as compared to fiscal 2011 was due primarily to the overall higher level of borrowing activity that occurred last year in support of the Company's merger and acquisition activity.
The Company had $1.03 billion of cash and short term equivalents at September 28, 2012. Of this amount, approximately $779.5 million was held in the U.S. and $253.0 million was held outside of the U.S., primarily in Canada, the United Kingdom, the Eurozone, and Australia. Other than the tax cost of repatriating funds held outside the U.S. to the U.S. (see Note 9—Income Taxes of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K), there are no impediments to repatriating these funds to the U.S.
On March 29, 2012, the Company and certain of its subsidiaries entered into a $1.21 billion unsecured, revolving credit facility (the "2012 Facility") with a syndicate of large, U.S. domestic and international banks and financial institutions. The 2012 Facility replaces and refinances the Company's previous revolving credit facility originally entered into by the Company on December 15, 2005 (the "2005 Facility"). Effective with the closing of the 2012 Facility, all commitments under the 2005 Facility were terminated and were refinanced under the 2012 Facility. The total amount utilized under the 2012 Facility at September 28, 2012 was $540.4 million ($528.3 million in the form of direct borrowings and $12.1 million utilized in the form of letters of credit). The 2012 Facility has a five year maturity. Please refer to Note 6—Borrowings of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K for additional information regarding the 2012 Facility.
We believe we have adequate liquidity and capital resources to fund our operations, support our acquisition strategy, and service our debt for the next twelve months. We had $1.03 billion in cash and cash equivalents at September 28, 2012, compared to $905.6 million at September 30, 2011. Our consolidated working capital position at September 28, 2012 was $1.87 billion; an increase of $853.5 million from September 30, 2011. Contributing to this increase in working capital in fiscal 2012 was the refinancing of $566.0 million of short-term debt under the the 2012 Facility.
Additionally, there was $664.6 million of borrowing capacity available at September 28, 2012 under the 2012 Facility. We believe that the remaining capacity, terms and conditions of our revolving credit facility, combined with cash on-hand and the other committed and uncommitted facilities we have in place, are adequate for our working capital and general business requirements.
The Company had $224.9 million of letters of credit outstanding at September 28, 2012. Of this amount, $12.1 million had been issued under the 2012 Facility and $212.7 million were issued under separate, committed and uncommitted letter-of-credit facilities.
Off-Balance Sheet Arrangements
We are party to financial instruments with off-balance sheet risk, in the form of guarantees not reflected in our balance sheet that arise in the normal course of business. However, such off-balance sheet arrangements are not reasonably likely to have an effect on our financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or resources that is material to investors. See Note 10 – Commitments and Contingencies, and Derivative Financial Instruments of Notes to Consolidated Financial Statements beginning on page F-1 of this Annual Report on Form 10-K.

Page43

Table of Contents

New Accounting Pronouncements
In July 2012, the Financial Accounting Standards Board ("FASB") adopted Accounting Standards Update ("ASU") No. 2012-02—Testing Indefinite-Lived Intangible Assets for Impairment. ASU 2012-02 amends Topic 350 of the FASB's Accounting Standards Codification ("ASC") regarding how entities test indefinite-lived intangible assets other than goodwill for possible impairment. ASU 2012-02 permits entities first to assess qualitative factors to determine whether it is more likely than not that an indefinite lived intangible asset is impaired as a basis for determining whether it is necessary to perform the quantitative impairment test pursuant to ASC Subtopic 350-30. If the entity determines that is is more likely than not that such asset is not impaired based on its qualitative assessment, no further testing is required. The amendments in ASU 2012-02 are effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012. The Company does not believe that the adoption of ASU 2012-02 will have a material effect on its consolidated financial statements.
In December 2011, the FASB adopted ASU No. 2011-12—Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of items Out of Accumulated Other Comprehensive Income in Accounting Standards Update No. 2011-05. ASU 2011-12 amends Topic 220 of the ASC as that Topic was affected by ASU 2011-05. ASU 2011-05 required entities to, among other things, present reclassification adjustments and the effect of such adjustment on the face of the financial statements where net earnings is presented, by component of net earnings, and on the face of the financial statements where other comprehensive income is presented, by component of other comprehensive income. The effect of ASU 2011-12 is to defer the effective date of certain of the presentation requirements of ASU 2011-05 in order to give the FASB more time to deliberate such requirements. The amendments in ASU 2011-12 are effective at the same time as the amendments in ASU 2011-05 so that entities will not be required to comply with the presentation requirements in Update 2011-05 that ASU 2012-12 is deferring.
Also in December 2011, the FASB adopted ASU No. 2011-11—Disclosures about Offsetting Assets and Liabilities. ASU 2011-11 amends Topic 210 of the ASC and requires entities to disclose information about offsetting and related arrangements to enable users of their financial statements to understand the effect of those arrangements on their respective financial positions. The scope of this ASU includes derivatives, sale and repurchase agreements, reverse sale and repurchase agreements, and securities borrowing and securities lending agreements. Entities are required to apply the provisions of ASU 2011-11 for annual reporting periods beginning on or after January 1, 2013. The Company does not believe that the adoption of ASU 2011-11 will have a material effect on its consolidated financial statements.
 
In September 2011, the FASB issued ASU 2011-08—Intangibles-Goodwill and Other. ASU 2011-08 amends Topic 350 of the ASC and simplifies how entities test goodwill for possible impairment. Under this ASU, an entity has the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If, after assessing the totality of events or circumstances, an entity determines it is not more likely than not that the fair value of a reporting unit is less than its carrying amount, then performing the two-step impairment test is unnecessary. However, if an entity concludes otherwise, then it is required to perform the first step of the two-step impairment test by calculating the fair value of the reporting unit and comparing the fair value with the carrying amount of the reporting unit. Under this ASU, an entity has the option to bypass the qualitative assessment for any reporting unit in any period and proceed directly to performing the first step of the two-step goodwill impairment test. An entity may resume performing the qualitative assessment in any subsequent period. ASU 2011-08 is effective for annual and interim goodwill impairment tests performed for fiscal years beginning after December 15, 2011. The Company does not believe that the adoption of ASU 2011-08 will have a material effect on its consolidated financial statements.
In June 2011, the FASB issued ASU 2011-05—Comprehensive Income. ASU 2011-05 amends Topic 220 of the ASC and provides that an entity has the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In both choices, an entity is required to present each component of net income along with total net income, each component of other comprehensive income along with a total for other comprehensive income, and a total amount for comprehensive income. The provisions of ASU 2011-05 will be applied retrospectively and are effective for fiscal years, and interim periods within those years, beginning after December 15, 2011. The Company is currently evaluating the impact of ASU 2011-05, if any, on its consolidated financial statements.


Page44

Table of Contents

Item 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We do not enter into derivative financial instruments for trading, speculation or other purposes that would expose the Company to market risk. In the normal course of business, our results of operations are exposed to risks associated with fluctuations in interest rates and currency exchange rates.
Interest Rate Risk
Please refer to the discussion of the Company's 2012 Facility in the liquidity and capital resources discussion in Management's Discussion and Analysis of Financial Condition and Results of Operations in this Annual Report on Form 10-K.
Foreign Currency Risk
In situations where our operations incur contract costs in currencies other than their functional currency, we attempt to have a portion of the related contract revenues denominated in the same currencies as the costs. In those situations where revenues and costs are transacted in different currencies, we sometimes enter into foreign exchange contracts in order to limit our exposure to fluctuating foreign currencies. We follow the provisions of ASC 815-10 in accounting for our derivative contracts. The Company does not currently have exchange rate sensitive instruments that would have a material effect on our consolidated financial statements or results of operations.

Item 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The information required by this Item 8 is submitted as a separate section beginning on page F-1of this Annual Report on Form 10-K and is incorporate herein by reference.

Item 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUTING AND FINANCIAL DISCLOSURE
None.

Item 9A.
CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
The Company’s management, with the participation of its Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of the Company’s disclosure controls and procedures as defined by Rule 13a-15(e) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) as of September 28, 2012, the end of the period covered by this Annual Report on Form 10-K (the “Evaluation Date”). Based on that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of the Evaluation Date.
Management’s Annual Report on Internal Control Over Financial Reporting
Management is responsible for establishing and maintaining adequate internal controls over financial reporting, as defined in Rule 13a-15(f) under the Exchange Act. Management, with the participation of its Chief Executive Officer and Chief Financial Officer, has assessed the effectiveness of the Company’s internal control over financial reporting as of the Evaluation Date based on the framework established in “Internal Control—Integrated Framework”, issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, management has concluded that the Company’s internal controls over financial reporting as of the Evaluation Date were effective. The Company’s independent registered public accounting firm, Ernst & Young LLP, has issued an attestation report on the Company’s internal control over financial reporting which appears later in this Annual Report on Form 10-K.
Changes in Internal Control
There were no changes in the Company’s internal control over financial reporting during the Company’s fiscal quarter ended September 28, 2012, that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Page45

Table of Contents


Limitations on Effectiveness of Controls
The Company’s management, including its Chief Executive Officer and Chief Financial Officer, does not expect that its disclosure controls and procedures or its system of internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed or operated, can provide only reasonable, but not absolute, assurance that the objectives of the system of internal control are met. The design of the Company’s control system reflects the fact that there are resource constraints, and that the benefits of such control system must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control failures and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the intentional acts of individuals, by collusion of two or more people, or by management override of the controls. The design of any system of controls is also based in part on certain assumptions about the likelihood of future events, and there can be no assurance that the design of any particular control will always succeed in achieving its objective under all potential future conditions.

Item 9B.
OTHER INFORMATION
None.

Page46

Table of Contents

PART III
 
Item 10.
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Directors, Executive Officers, Promoters and Control Persons
The information required by Paragraph (a), and Paragraphs (c) through (g) of Item 401 of Regulation S-K (except for information required by Paragraph (e) of that Item to the extent the required information pertains to our executive officers) and Item 405 of Regulation S-K is hereby incorporated by reference from our definitive proxy statement to be filed with the SEC pursuant to Regulation 14A within 120 days after the close of our fiscal year. The information required by Paragraph (b) of Item 401 of Regulation S-K is set forth in Part I, Item 1 of this Annual Report on Form 10-K.
Code of Ethics
We have adopted a code of ethics for our chief executive, chief financial, and principal accounting officers; a code of business conduct and ethics for members of our Board of Directors; and corporate governance guidelines. The full text of the codes of ethics and corporate governance guidelines is available at our website www.jacobs.com. In the event we make any amendment to, or grant any waiver from, a provision of the code of ethics that applies to the principal executive officer, principal financial officer or principal accounting officer that requires disclosure under applicable SEC rules, we will disclose such amendment or waiver and the reasons therefor on our website. We will provide any person without charge a copy of any of the aforementioned codes of ethics upon receipt of a written request. Requests should be addressed to: Jacobs Engineering Group Inc., 1111 S. Arroyo Parkway, Pasadena, California, 91105, Attention: Corporate Secretary.
Corporate Governance
The information required by Items 407(c)(3), (d)(4) and (d)(5) of Regulation S-K is hereby incorporated by reference from our definitive proxy statement to be filed with the SEC pursuant to Regulation 14A within 120 days after the close of our fiscal year.

Item 11.
EXECUTIVE COMPENSATION
The information required by this Item is hereby incorporated by reference from our definitive proxy statement to be filed with the SEC pursuant to Regulation 14A within 120 days after the close of our fiscal year.
 

Page47

Table of Contents

Item 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
Securities Authorized for Issuance Under Equity Compensation Plans
The following table presents certain information about our equity compensation plans as of September 28, 2012:
 
 
Column A
 
Column B
 
Column C
Plan Category
 
Number of
securities to
be issued
upon
exercise of
outstanding
options,
warrants,
and rights
 
Weighted-
average
exercise
price of
outstanding
options,
warrants,
and rights
 
Number of
securities
remaining
available for
future
issuance
under equity
compensation
plans
(excluding
securities
reflected in
Column A)
Equity compensation plans approved by shareholders (a)
 
5,756,734

 
$
47.23

 
4,029,346

Equity compensation plans not approved by shareholders
 

 

 

Total
 
5,756,734

 
$
47.23

 
4,029,346

____________________
(a)
The number in Column A excludes purchase rights accruing under our two, broad-based, shareholder-approved employee stock purchase plans: The Jacobs Engineering Group Inc. 1989 Employee Stock Purchase Plan (the “1989 ESPP”), and the Global Employee Stock Purchase Plan (the “GESPP”). These plans give employees the right to purchase shares at an amount and price that are not determinable until the end of the specified purchase periods, which occurs monthly. Our shareholders have authorized a total of 27.8 million shares of common stock to be issued through the 1989 ESPP and the GESPP. From the inception of the 1989 ESPP and the GESPP through September 28, 2012, a total of 24.4 million shares have been issued, leaving 3.4 million shares of common stock available for future issuance at that date.
The information required by Item 403 of Regulation S-K is hereby incorporated by reference from our definitive proxy statement to be filed with the SEC pursuant to Regulation 14A within 120 days after the close of our fiscal year.

Item 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by this Item is hereby incorporated by reference from our definitive proxy statement to be filed with the SEC pursuant to Regulation 14A within 120 days after the close of our fiscal year.

Item 14.
PRINCIPAL ACCOUNTING FEES AND SERVICES
The information required by this Item is hereby incorporated by reference from our definitive proxy statement to be filed with the SEC pursuant to Regulation 14A within 120 days after the close of our fiscal year.

Page48

Table of Contents

PART IV

Item 15.
EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a)Documents filed as part of this report:
(1)
The Company’s Consolidated Financial Statements at September 28, 2012 and September 30, 2011 and for each of the three years in the period ended September 28, 2012, September 30, 2011 and October 1, 2010 and the notes thereto, together with the report of the independent auditors on those Consolidated Financial Statements are hereby filed as part of this report, beginning on page F-1.
(2)
Financial statement schedules – no financial statement schedules are presented as the required information is either not applicable, or is included in the consolidated financial statements or notes thereto.
(3)See Exhibits and Index to Exhibits, below.
(b)Exhibits and Index to Exhibits:
2.1

 
Share Purchase Agreement between Aker Solutions ASA and certain of its subsidiaries and the Registrant and certain of its subsidiaries, dated as of December 21, 2010, for the purchase of certain Aker Solutions businesses. Filed as Exhibit 2.1 to the Registrant’s Quarterly Report on Form 10-Q for the first quarter of fiscal 2011 and incorporated herein by reference.
 
 
 
†3.1

 
Amended and Restated Certificate of Incorporation of the Registrant.
 
 
 
3.2

 
Jacobs Engineering Group Inc. Amended and Restated Bylaws, dated November 15, 2012. Filed as Exhibit 3.1 to the Registrant’s Current Report on Form 8-K filed on November 19, 2012 and incorporated herein by reference.
 
 
 
4.1

 
See Sections 5 through 18 of Exhibit 3.1.
 
 
 
4.2

 
See Article II, Section 3.03 of Article III, Article VI and Section 7.04 of Article VII of Exhibit 3.2.
 
 
 
10.1 #

 
The Jacobs Engineering Group Inc. Incentive Bonus Plan for Officers and Key Managers. Filed as Exhibit 10.10 to the Registrant’s fiscal 2011 Annual Report on Form 10-K and incorporated herein by reference.
 
 
 
10.2 #

 
The Executive Security Program of Jacobs Engineering Group Inc. Filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2009 and incorporated herein by reference.
 
 
 
10.3 #

 
Amendment to the Executive Security Program of Jacobs Engineering Group Inc., dated December 23, 2008. Filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2009 and incorporated herein by reference.
 
 
 
10.4 #

 
Amendment to the Executive Security Program of Jacobs Engineering Group Inc., dated May 31, 2009. Filed as Exhibit 10.5 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2009 and incorporated herein by reference.
 
 
 
†10.5 #

 
Jacobs Engineering Group Inc. 1991 Executive Deferral Plan, effective June 1, 1991.
 
 
 
†10.6 #

 
Jacobs Engineering Group Inc. 1993 Executive Deferral Plan, effective December 1, 1993.
 
 
 
10.7 #

 
Jacobs Engineering Group Inc. 1995 Executive Deferral Plan, effective January 1, 1995. Filed as Exhibit 10.7 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2009 and incorporated herein by reference.
 
 
 
†10.8 #

 
Jacobs Engineering Group Inc. Amended and Restated Executive Deferral Plan.
10.9 #

 
The Jacobs Engineering Group Inc. 1989 Employee Stock Purchase Plan, as Amended and Restated-effective January 22, 2009. Filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K dated January 27, 2009 and incorporated herein by reference.
 
 
 
10.10 #

 
The Jacobs Engineering Group Inc. Global Employee Stock Purchase Plan. Filed as Exhibit 10.10 to the Registrant’s fiscal 2011 Annual Report on Form 10-K and incorporated herein by reference.
 
 
 

Page49

Table of Contents

10.11 #

 
Form of Indemnification Agreement entered into between the Registrant and certain of its officers and directors. Filed as Exhibit 10.8 to the Registrant’s fiscal 2008 Annual Report on Form 10-K and incorporated herein by reference.
 
 
 
†10.12 #

 
Jacobs Engineering Group Inc. 401(k) Plus Savings Plan and Trust, as Amended and Restated April 1, 2003.
 
 
 
10.13 #

 
Jacobs Engineering Group Inc. 1999 Stock Incentive Plan, as Amended and Restated. Filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on January 27, 2012 and incorporated herein by reference.
 
 
 
10.14 #

 
Form of Indemnification Agreement entered into between the Registrant and certain of its officers and directors. Filed as Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the third quarter of fiscal 2012 and incorporated herein by reference.
 
 
 
10.15 #

 
Form of Jacobs Engineering Group Inc. Non-Qualified Stock Option Agreement. Filed as Exhibit 4.3 to the Registrant’s Registration Statement on Form S-8 filed on January 29, 2009 and incorporated herein by reference.
 
 
 
10.16 #

 
Form of Jacobs Engineering Group Inc. Restricted Stock Agreement. Filed as Exhibit 10.3 to the Registrant's Quarterly Report on Form 10-Q for the second quarter of fiscal 2012 and incorporated herein by reference.
 
 
 
10.17 #

 
Form of Restricted Stock Unit Award Agreement (Market Stock Units). Filed as Exhibit 10.2 to the Registrant’s Current Report on Form 8-K filed on June 1, 2011 and incorporated herein by reference.
 
 
 
10.18 #

 
Form of Restricted Stock Unit Award Agreement. Filed as Exhibit 10.2 to the Registrant’s Current Report on Form 8-K filed on June 1, 2011 and incorporated herein by reference. Filed as Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the second quarter of fiscal 2012 and incorporated herein by reference.
 
 
 
10.19 #

 
Form of Restricted Stock Award Agreement. Filed as Exhibit 10.3 to the Registrant’s Current Report on Form 8-K dated May 26, 2011 and incorporated herein by reference.
 
 
 
10.20 #

 
Amendment One to Restricted Stock Unit Award Agreement (Market Stock Units) by and between Craig Martin and the Company dated as of October 14, 2011. Filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on October 18, 2011 and incorporated herein by reference.
 
 
 
†10.21

 
Jacobs Engineering Group Inc. 1999 Outside Director Stock Plan, as Amended and Restated
 
 
 
10.22

 
Credit Agreement dated as of December 15, 2005 among Jacobs Engineering Group Inc. and certain of its subsidiaries (as “Borrowers”), and the Bank of Nova Scotia, Wachovia Bank N.A., BNP Paribas., Bank of America, N.A. (as “Administrative Agent”), and other lender parties, and Banc of America Securities LLC (as “Sole Lead Arranger”). Filed as Exhibit 10.12 to the Registrant’s fiscal 2006 Annual Report on Form 10-K and incorporated herein by reference.
 
 
 
10.23

 
Credit Agreement dated as of March 29, 2012 among Jacobs Engineering Group Inc. and certain of its subsidiaries )as "borrowers"), and the Bank of America, N.AA. (as "Administrative Agent"); BNP Paribas, and Wells Fargo Bank, N.A. (as Co-Syndication Agents); Union Bank, N.A. (as Documentation Agent); Merrill Lynch, Pierce, Fenner & Smith Incorporated (as Sole Book Manager); and Merrill Lynch, Pierce, Fenner & Smith Incorporated, BNP Paribas Securities Corp, and Wells Fargo Securities, LLC (as Joint Lead Arrangers). Filed as Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the second quarter of fiscal 2012 and incorporated herein by reference.
 
 
 
10.24

 
Amendment Agreement Entered Into as of May 4, 2007 Among Jacobs Engineering Group Inc. and Certain Subsidiaries, the Bank of Nova Scotia as Canadian Facility Agent, Bank of America, N.A. as Administrative Agent, and Certain Other Lending Banks and Financial Institutions. Filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2007 and incorporated herein by reference
 
 
 
10.25 #

 
Assignment Letter Agreement dated February 16, 2005 between the Registrant and Thomas R. Hammond, Executive Vice President. Filed as Exhibit 10.17 to the Registrant’s fiscal 2010 Annual Report on Form 10-K and incorporated herein by reference.


Page50

Table of Contents

10.26 #

 
Amendment dated March 24, 2005 to the February 16, 2005 Assignment Letter Agreement between the Registrant and Thomas R. Hammond, Executive Vice President. Filed as Exhibit 10.15 to the Registrant’s fiscal 2008 Annual Report on Form 10-K and incorporated herein by reference.
 
 
 
10.27 #

 
Amendment dated April 23, 2008 to the February 16, 2005 Assignment Letter Agreement between the Registrant and Thomas R. Hammond, Executive Vice President. Filed as Exhibit 10.16 to the Registrant’s fiscal 2008 Annual Report on Form 10-K and incorporated herein by reference.
 
 
 
10.28 #

 
Amendment dated October 1, 2009 to the February 16, 2005 Assignment Letter Agreement between the Registrant and Thomas R. Hammond, Executive Vice President. Filed as Exhibit 10.18 to the Registrant’s fiscal 2009 Annual Report on Form 10-K and incorporated by reference.
 
 
 
10.29 #

 
Relocation/Repatriation Agreement, dated as of September 29, 2011, by and between the Registrant and Thomas Hammond. Filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K dated September 29, 2011 and incorporated herein by reference.
 
 
 
10.30 #

 
Relocation Agreement dated October 1, 2009 between the Registrant and George A. Kunberger, Executive Vice President. Filed as Exhibit 10.19 to the Registrant’s fiscal 2009 Annual Report on Form 10-K and incorporated by reference.
 
 
 
10.31 #

 
Jacobs Engineering Group Inc. 2005 Executive Deferral Plan, effective January 1, 2005. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the second quarter of fiscal 2010 and incorporated herein by reference.
 
 
 
10.32 #

 
Agreement between Jacobs Engineering Group Inc. and Noel G. Watson dated July 1, 2010. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2010 and incorporated herein by reference.
 
 
 
10.33 #

 
Consulting Agreement between Jacobs Engineering Group Inc. and Noel G. Watson dated July 1, 2010. Filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2010 and incorporated herein by reference.
 
 
 
10.34 #

 
Amendment No. 1 to Consulting Agreement between the Registrant and Noel G. Watson dated July 1, 2011. Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the third quarter of fiscal 2011 and incorporated herein by reference.
 
 
 
10.35

 
Term Loan Agreement dated January 27, 2011 between Jacobs Engineering U.K. Limited and Royal Bank of Scotland Finance (Ireland). Filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the second quarter of fiscal 2011 and incorporated herein by reference.
 
 
 
10.36

 
Senior Term Loan Facility dated January 26, 2011 between Jacobs Nederland B.V. and BNP Paribas. Filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the second quarter of fiscal 2011 and incorporated herein by reference.
 
 
 
10.37

 
Senior Term Loan Facility dated January 26, 2011 between Jacobs Engineering U.K. Limited and Bank of America, N.A., London Branch. Filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the second quarter of fiscal 2011 and incorporated herein by reference.
 
 
 
10.38

 
Senior Term Loan Facility dated January 26, 2011 between Jacobs Australia Pty Limited and Bank of America, N.A., Australian Branch. Filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the second quarter of fiscal 2011 and incorporated herein by reference.
 
 
 
10.39

 
Form of Guaranty among certain subsidiaries of the Registrant and Royal Bank of Scotland Finance (Ireland), BNP Paribas, Bank of America, N.A., London Branch, and Bank of America, N.A., Australian Branch. Filed as Exhibit 10.5 to the Registrant’s Quarterly Report on Form 10-Q for the second quarter of fiscal 2011 and incorporated herein by reference.
 

Page51

Table of Contents

10.40 #
  
Employment Agreement dated December 23, 2010 between the Registrant and Gary Mandel. Filed as Exhibit 10.6 to the Registrant’s Quarterly Report on Form 10-Q for the second quarter of fiscal 2011 and incorporated herein by reference.
 
 
†21.
  
List of Subsidiaries of Jacobs Engineering Group Inc.
 
 
†22.
  
Consent of Ernst & Young LLP, Independent Registered Public Accounting Firm.
 
 
†31.1
  
Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
†31.2
  
Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
†32.1
  
Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
†32.2
  
Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
†101.INS
  
XBRL Instance Document
 
 
†101.SCH
  
XBRL Taxonomy Extension Schema Document
 
 
†101.CAL
  
XBRL Taxonomy Extension Calculation Linkbase Document
 
 
†101.DEF
  
XBRL Taxonomy Extension Definition Linkbase Document
 
 
†101.LAB
  
XBRL Taxonomy Extension Label Linkbase Document
 
 
†101.PRE
  
XBRL Taxonomy Extension Presentation Linkbase Document
Being filed herewith.
#
Management contract or compensatory plan or arrangement.


Page52

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
 
 
JACOBS ENGINEERING GROUP INC.
Dated:
November 20, 2012
 
By:
 
/S/ Craig L. Martin
 
 
 
 
 
Craig L. Martin
 
 
 
 
 
President, Chief Executive Officer, and Director (Principal Executive Officer)
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:
Signature
  
Title
 
Date
/S/ Craig L. Martin
 
President, Chief Executive Officer and
Director (Principal Executive Officer)
 
November 20, 2012
Craig L. Martin
  
 
 
 
/S/ Noel G. Watson
  
Chairman of the Board
 
November 20, 2012
Noel G. Watson
  
 
 
 
/S/ Joseph R. Bronson
  
Director
 
November 20, 2012
Joseph R. Bronson
  
 
 
 
/S/ John F. Coyne
  
Director
 
November 20, 2012
John F. Coyne
  
 
 
 
/S/ Robert C. Davidson, Jr.
  
Director
 
November 20, 2012
Robert C. Davidson, Jr.
  
 
 
 
/S/ Ralph E. Eberhart
  
Director
 
November 20, 2012
Ralph E. Eberhart
  
 
 
 
/S/ Edward V. Fritzky
  
Director
 
November 20, 2012
Edward V. Fritzky
  
 
 
 
/S/ Linda Fayne Levinson
  
Director
 
November 20, 2012
Linda Fayne Levinson
 
 
 
 
/S/ Benjamin F. Montoya
  
Director
 
November 20, 2012
Benjamin F. Montoya
  
 
 
 
/S/ Peter J. Robertson
  
Director
 
November 20, 2012
Peter J. Robertson
  
 
 
 
 
  
Director
 
 
Christopher M.T. Thompson
  
 
 
 
/S/ John W. Prosser, Jr.
  
Executive Vice President,
Finance and Administration and Treasurer
(Principal Financial Officer)
 
November 20, 2012
John W. Prosser, Jr.
  
 
 
 
/S/ Nazim G. Thawerbhoy
  
Senior Vice President and Controller
(Principal Accounting Officer)
 
November 20, 2012
Nazim G. Thawerbhoy
  
 
 
 

Page53

Table of Contents


JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
WITH REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
September 28, 2012

F-1

Table of Contents


JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
September 28, 2012
  
 
 
  
 
 
  
 
 
  
 
 
  
 
 
  
 
 
  


F-2

Table of Contents

JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(In thousands, except share information)
At September 28, 2012 and September 30, 2011
 
 
2012
 
2011
ASSETS
 
 
 
 
Current Assets:
 
 
 
 
Cash and cash equivalents
 
$
1,032,457

 
$
905,633

Receivables
 
2,348,892

 
2,077,494

Deferred income taxes
 
142,369

 
133,418

Prepaid expenses and other current assets
 
88,359

 
63,546

Total current assets
 
3,612,077

 
3,180,091

Property, Equipment, and Improvements, Net
 
331,131

 
284,633

Other Noncurrent Assets:
 
 
 
 
Goodwill
 
2,010,340

 
1,872,768

Miscellaneous
 
885,885

 
861,734

Total other noncurrent assets
 
2,896,225

 
2,734,502

 
 
$
6,839,433

 
$
6,199,226

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
 
Current Liabilities:
 
 
 
 
Notes payable
 
$

 
$
566,031

Accounts payable
 
376,694

 
351,299

Accrued liabilities
 
1,061,969

 
937,291

Billings in excess of costs
 
263,275

 
276,739

Income taxes payable
 
45,114

 
37,166

Total current liabilities
 
1,747,052

 
2,168,526

Long-term Debt
 
528,260

 
2,042

Other Deferred Liabilities
 
796,338

 
705,273

Redeemable Noncontrolling Interest
 
8,894

 

Commitments and Contingencies
 

 

Stockholders’ Equity:
 
 
 
 
Capital stock:
 
 
 
 
Preferred stock, $1 par value, authorized—1,000,000 shares; issued and outstanding—none
 

 

Common stock, $1 par value, authorized—240,000,000 shares; issued and outstanding—129,935,881 shares and 127,784,884 shares, respectively
 
129,936

 
127,785

Additional paid-in capital
 
953,983

 
858,460

Retained earnings
 
2,920,441

 
2,564,281

Accumulated other comprehensive loss
 
(281,887
)
 
(237,538
)
Total Jacobs stockholders’ equity
 
3,722,473

 
3,312,988

Noncontrolling interests
 
36,416

 
10,397

Total Group stockholders’ equity
 
3,758,889

 
3,323,385

 
 
$
6,839,433

 
$
6,199,226

See the accompanying Notes to Consolidated Financial Statements.

F-3

Table of Contents

JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF EARNINGS
For the Fiscal Years Ended September 28, 2012September 30, 2011, and October 1, 2010
(In thousands, except per share information)
 
 
2012
 
2011
 
2010
Revenues
 
$
10,893,778

 
$
10,381,664

 
$
9,915,517

Costs and Expenses:
 
 
 
 
 
 
Direct costs of contracts
 
(9,166,789
)
 
(8,822,171
)
 
(8,582,912
)
Selling, general and administrative expenses
 
(1,130,916
)
 
(1,040,575
)
 
(932,522
)
Operating Profit
 
596,073

 
518,918

 
400,083

Other (Expense) Income:
 
 
 
 
 
 
Interest income
 
6,049

 
4,917

 
4,791

Interest expense
 
(11,686
)
 
(8,799
)
 
(9,874
)
Gain on sale of intellectual property, net
 
6,292

 

 

Miscellaneous income (expense), net
 
(3,392
)
 
1,625

 
(3,066
)
Total other expense, net
 
(2,737
)
 
(2,257
)
 
(8,149
)
Earnings Before Taxes
 
593,336

 
516,661

 
391,934

Income Tax Expense
 
(202,382
)
 
(181,440
)
 
(145,647
)
Net Earnings of the Group
 
390,954

 
335,221

 
246,287

Net Earnings Attributable to Noncontrolling Interests
 
(12,000
)
 
(4,192
)
 
(313
)
Net Earnings Attributable to Jacobs
 
$
378,954

 
$
331,029

 
$
245,974

Net Earnings Per Share:
 
 
 
 
 
 
Basic
 
$
2.97

 
$
2.63

 
$
1.98

Diluted
 
$
2.94

 
$
2.60

 
$
1.96

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
For the Fiscal Years Ended September 28, 2012September 30, 2011, and October 1, 2010
(In thousands)
 
 
2012
 
2011
 
2010
Net Earnings of the Group
 
$
390,954

 
$
335,221

 
$
246,287

Other Comprehensive (Loss) Income:
 
 
 
 
 
 
Foreign currency translation adjustments
 
30,038

 
(22,524
)
 
(9,338
)
Change in pension liability
 
(100,385
)
 
99,881

 
(89,091
)
Gains (losses) on cash flow hedges
 
3,567

 
137

 
(1,444
)
Other Comprehensive Income (Loss) Before Income Taxes
 
(66,780
)
 
77,494

 
(99,873
)
Income Tax Benefit (Expense):
 
 
 
 
 
 
Foreign currency translation adjustments
 
(750
)
 
(2,500
)
 

Change in pension liability
 
24,443

 
(26,707
)
 
25,095

Gains (losses) on cash flow hedges
 
(1,262
)
 
(84
)
 
552

Total Income Tax Benefit (Expense)
 
22,431

 
(29,291
)
 
25,647

Net Other Comprehensive Income (Loss)
 
(44,349
)
 
48,203

 
(74,226
)
Net Comprehensive Income of the Group
 
346,605

 
383,424

 
172,061

Net Comprehensive Income Attributable to Noncontrolling Interests
 
(12,000
)
 
(4,192
)
 
(313
)
Total Comprehensive Income Attributable to Jacobs
 
$
334,605

 
$
379,232

 
$
171,748

See the accompanying Notes to Consolidated Financial Statements.

F-4

Table of Contents

JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
For the Fiscal Years Ended September 28, 2012September 30, 2011, and October 1, 2010
(In thousands)
 
 
Common
Stock
 
Additional
Paid-in
Capital
 
Retained
Earnings
 
Accumulated
Other Comp-
rehensive
Income
(Loss)
 
Total
Jacobs
Stock-
holders’
Equity
 
Non-
controlling
Interests
 
Total
Group
Stock-
holders’
Equity
Balances at 10/2/2009
 
$
124,230

 
$
703,860

 
$
2,009,338

 
$
(211,515
)
 
$
2,625,913

 
$
5,562

 
$
2,631,475

Net earnings
 

 

 
245,974

 

 
245,974

 
313

 
246,287

Foreign currency translation adjustments
 

 

 

 
(9,338
)
 
(9,338
)
 
5

 
(9,333
)
Pension liability, net of deferred tax benefit of $25,095
 

 

 

 
(63,996
)
 
(63,996
)
 

 
(63,996
)
Other, miscellaneous elements of total comprehensive income (loss), net of deferred tax benefit of $552
 

 

 

 
(892
)
 
(892
)
 

 
(892
)
Issuances of equity securities, net
 
1,802

 
66,635

 

 

 
68,437

 

 
68,437

Repurchases of equity securities
 
(123
)
 
(2,981
)
 
(3,946
)
 

 
(7,050
)
 

 
(7,050
)
Balances at October 1, 2010
 
125,909

 
767,514

 
2,251,366

 
(285,741
)
 
2,859,048

 
5,880

 
2,864,928

Net earnings
 

 

 
331,029

 

 
331,029

 
4,192

 
335,221

Foreign currency translation adjustments, net of deferred tax expense of $2,500
 

 

 

 
(25,024
)
 
(25,024
)
 

 
(25,024
)
Pension liability, net of deferred tax expense of $26,707
 

 

 

 
73,174

 
73,174

 

 
73,174

Other, miscellaneous elements of total comprehensive income (loss), net of deferred tax expense of $84
 

 

 

 
53

 
53

 

 
53

Noncontrolling interest acquired / consolidated
 

 

 

 

 

 
4,942

 
4,942

Distributions to noncontrolling interests
 

 

 

 

 

 
(4,617
)
 
(4,617
)
Issuances of equity securities, net
 
2,282

 
96,010

 

 

 
98,292

 

 
98,292

Repurchases of equity securities
 
(406
)
 
(5,064
)
 
(18,114
)
 

 
(23,584
)
 

 
(23,584
)
Balances at September 30, 2011
 
127,785

 
858,460

 
2,564,281

 
(237,538
)
 
3,312,988

 
10,397

 
3,323,385

Net earnings
 

 

 
378,954

 

 
378,954

 
12,000

 
390,954

Foreign currency translation adjustments, net of deferred tax expense of $750
 

 

 

 
29,288

 
29,288

 

 
29,288

Pension liability, net of deferred tax benefit of $24,443
 

 

 

 
(75,942
)
 
(75,942
)
 

 
(75,942
)
Other, miscellaneous elements of total comprehensive income (loss), net of deferred tax expense of $1,262
 

 

 

 
2,305

 
2,305

 

 
2,305

Noncontrolling interest acquired / consolidated
 

 

 
(3,971
)
 

 
(3,971
)
 
15,528

 
11,557

Distributions to noncontrolling interests
 

 

 

 

 

 
(5,376
)
 
(5,376
)
Contributions from noncontrolling interests
 

 

 

 

 

 
3,867

 
3,867

Issuances of equity securities, net
 
2,706

 
106,494

 

 

 
109,200

 

 
109,200

Repurchases of equity securities
 
(555
)
 
(10,971
)
 
(18,823
)
 

 
(30,349
)
 

 
(30,349
)
Balances at September 28, 2012
 
$
129,936

 
$
953,983

 
$
2,920,441

 
$
(281,887
)
 
$
3,722,473

 
$
36,416

 
$
3,758,889

See the accompanying Notes to Consolidated Financial Statements.

F-5

Table of Contents

JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
For the Fiscal Years Ended September 28, 2012September 30, 2011, and October 1, 2010
(In thousands)

 
 
2012
 
2011
 
2010
Cash Flows from Operating Activities:
 
 
 
 
 
 
Net earnings attributable to the Group
 
$
390,954

 
$
335,221

 
$
246,287

Adjustments to reconcile net earnings to net cash flows from operations:
 
 
 
 
 
 
Depreciation and amortization:
 
 
 
 
 
 
Property, equipment and improvements
 
58,890

 
57,620

 
64,447

Intangible assets
 
41,934

 
37,750

 
24,048

Write-off of the SIVOM receivable
 

 

 
25,894

Purchase accounting gain
 

 
(3,716
)
 

Gain on sale of certain intellectual property
 
(6,292
)
 

 

Stock based compensation
 
32,442

 
29,084

 
24,361

Excess tax benefits from stock based compensation
 
(3,957
)
 
(6,837
)
 
(2,884
)
Equity in earnings of investees, net of dividends
 
(8,980
)
 
(8,729
)
 
(1,759
)
Change in pension plan obligations
 
(28,351
)
 
(27,150
)
 
2,516

Change in deferred compensation plans
 
(5,474
)
 

 

(Gains) Losses on sales of assets, net
 
811

 
(481
)
 
353

Changes in assets and liabilities, excluding the effects of businesses acquired:
 
 
 
 
 
 
Receivables
 
(227,123
)
 
(234,024
)
 
(3,052
)
Prepaid expenses and other current assets
 
(19,265
)
 
(14,604
)
 
(56
)
Accounts payable
 
10,673

 
(15,997
)
 
(46,920
)
Accrued liabilities
 
80,806

 
41,529

 
(43,328
)
Billings in excess of costs
 
(15,626
)
 
13,304

 
(42,819
)
Income taxes payable
 
10,015

 
26,387

 
(24,733
)
Deferred income taxes
 
(1,036
)
 
15,853

 
551

Other deferred liabilities
 
(4,764
)
 
(1,218
)
 

Other, net
 
(5,852
)
 
(7,502
)
 
715

Net cash provided by operating activities
 
299,805

 
236,490

 
223,621

Cash Flows from Investing Activities:
 
 
 
 
 
 
Additions to property and equipment
 
(102,574
)
 
(98,749
)
 
(49,075
)
Disposals of property and equipment
 
319

 
3,860

 
14,379

Purchases of investments
 
(38
)
 
(193
)
 
(106,733
)
Sales of investments
 
15

 
4,667

 

Sale of intellectual property
 
12,726

 

 

Acquisitions of businesses, net of cash acquired
 
(91,575
)
 
(711,421
)
 
(259,492
)
Other, net
 

 

 
2,435

Net cash used for investing activities
 
(181,127
)
 
(801,836
)
 
(398,486
)

See the accompanying Notes to Consolidated Financial Statements.







F-6

Table of Contents

JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
For the Fiscal Years Ended September 28, 2012September 30, 2011, and October 1, 2010
(In thousands)
Continued

 
 
2012
 
2011
 
2010
Cash Flows from Financing Activities:
 
 
 
 
 
 
Proceeds from long-term borrowings
 
528,673

 
825,681

 

Repayments of long-term borrowings
 
(98
)
 
(239,189
)
 
(217
)
Proceeds from short-term borrowings
 
2,586

 
77,055

 
105,184

Repayments of short-term borrowings
 
(579,901
)
 
(159,394
)
 
(47,094
)
Proceeds from issuances of common stock
 
43,568

 
45,943

 
36,209

Excess tax benefits from stock based compensation
 
3,956

 
6,837

 
2,884

Distributions to noncontrolling interests
 
(5,376
)
 

 

Contributions from noncontrolling interests
 
3,868

 

 

Other, net
 

 

 
(3,852
)
Net cash provided by (used for) financing activities
 
(2,724
)
 
556,933

 
93,114

Effect of Exchange Rate Changes
 
10,870

 
(24,796
)
 
(13,026
)
Increase (Decrease) in Cash and Cash Equivalents
 
126,824

 
(33,209
)
 
(94,777
)
Cash and Cash Equivalents at Beginning of Period
 
905,633

 
938,842

 
1,033,619

Cash and Cash Equivalents at End of Period
 
$
1,032,457

 
$
905,633

 
$
938,842



F-7

Table of Contents

JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. Description of Business and Basis of Presentation
Description of Business
We provide a broad range of technical, professional, and construction services including engineering, design, and architectural services; construction and construction management services; operations and maintenance services; and process, scientific, and systems consulting services. We provide our services through offices and subsidiaries located primarily in North America, South America, Europe, the Middle East, India, Australia, Africa, and Asia. We provide our services under cost-reimbursable and fixed-price contracts. The percentage of revenues realized from each of these types of contracts for each of the last three fiscal years was as follows:
 
 
2012
 
2011
 
2010
Cost-reimbursable
 
85
%
 
84
%
 
87
%
Fixed-price
 
15
%
 
16
%
 
13
%
Basis of Presentation, Definition of Fiscal Year, and Other Matters
The accompanying Consolidated Financial Statements have been prepared in accordance with U.S. GAAP and include the accounts of Jacobs Engineering Group Inc. and its subsidiaries and affiliates which it controls. All significant intercompany accounts and transactions have been eliminated in consolidation. Certain amounts in the Statement of Cash flows for fiscal 2011 and 2010 have been reclassified to conform to the fiscal 2012 presentation.
The Company’s fiscal year ends on the Friday closest to September 30 (determined on the basis of the number of workdays) and, accordingly, an additional week of activity is added every five-to-six years.
During fiscal 2012, and within the measurement period prescribed by U.S. GAAP, we completed the purchase price allocations of two business combinations completed last year. Accordingly, the Consolidated Balance Sheet at September 30, 2011 has been revised to include the significant effects of the final purchase price allocations (see Note 3—Business Combinations).
Please refer to Note 16—Definitions for the definitions of certain terms used in the accompanying Consolidated Financial Statements and these Notes to Consolidated Financial Statements.
2. Significant Accounting Policies
Revenue Accounting for Contracts and Use of Joint Ventures
In general, we recognize revenues at the time we provide services. Depending on the commercial terms of the contract, we recognize revenues either when costs are incurred, or using the percentage-of-completion method of accounting by relating contract costs incurred to date to the total estimated costs at completion. Contract losses are provided for in their entirety in the period they become known, without regard to the percentage-of-completion. For multiple contracts with a single customer we account for each contract separately. We also recognize as revenues costs associated with claims and unapproved change orders to the extent it is probable that such claims and change orders will result in additional contract revenue, and the amount of such additional revenue can be reliably estimated.
Certain cost-reimbursable contracts include incentive-fee arrangements. The incentive fees in such contracts can be based on a variety of factors but the most common are the achievement of target completion dates, target costs, and/or other performance criteria. Failure to meet these targets can result in unrealized incentive fees. We recognize incentive fees based on expected results using the percentage-of-completion method of accounting. As the contract progresses and more information becomes available, the estimate of the anticipated incentive fee that will be earned is revised as necessary. We bill incentive fees based on the terms and conditions of the individual contracts. In certain situations, we are allowed to bill a portion of the incentive fees over the performance period of the contract. In other situations, we are allowed to bill incentive fees only after the target criterion has been achieved. Incentive fees which have been recognized but not billed are included in receivables in the accompanying Consolidated Balance Sheets.

F-8

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Certain cost-reimbursable contracts with government customers as well as certain commercial clients provide that contract costs are subject to audit and adjustment. In this situation, revenues are recorded at the time services are performed based upon the amounts we expect to realize upon completion of the contracts. Revenues are not recognized for non-recoverable costs. In those situations where an audit indicates that we may have billed a client for costs not allowable under the terms of the contract, we estimate the amount of such nonbillable costs and adjust our revenues accordingly.
When we are directly responsible for subcontractor labor or third-party materials and equipment, we reflect the costs of such items in both revenues and costs (and we refer to such costs as “pass-through” costs). On those projects where the client elects to pay for such items directly and we have no associated responsibility for such items, these amounts are not reflected in either revenues or costs.
The following table sets forth pass-through costs included in revenues for each of the last three fiscal years 2012, 2011, and 2010 (in millions):
2012
 
2011
 
2010
$
2,328.4

 
$
2,118.5

 
$
2,723.3

As is common to the industry, we execute certain contracts jointly with third parties through various forms of joint ventures and consortiums. Although the joint ventures own and hold the contracts with the clients, the services required by the contracts are typically performed by us and our joint venture partners, or by other subcontractors under subcontracting agreements with the joint ventures. The assets of our joint ventures, therefore, consist almost entirely of cash and receivables (representing amounts due from clients), and the liabilities of our joint ventures consist almost entirely of amounts due to the joint venture partners (for services provided by the partners to the joint ventures under their individual subcontracts) and other subcontractors. In general, at any given time, the equity of our joint ventures represents the undistributed profits earned on contracts the joint ventures hold with clients. Very few of our joint ventures have employees. None of our joint ventures have third-party debt or credit facilities. Our joint ventures, therefore, are simply mechanisms used to deliver engineering and construction services to clients. Rarely do they, in and of themselves, present any risk of loss to us or to our partners separate from those that we would carry if we were performing the contract on our own. Under U.S. GAAP, our share of losses associated with the contracts held by the joint ventures, if and when they occur, has always been reflected in our Consolidated Financial Statements.
Certain of our joint ventures meet the definition of a VIE. In evaluating our VIEs for possible consolidation, we perform a qualitative analysis to determine whether or not we have a “controlling financial interest” in the VIE as defined by U.S. GAAP. We consolidate only those VIEs over which we have a controlling financial interest.
For the Company’s unconsolidated joint ventures, we use either the equity method of accounting or proportional consolidation. The Company does not currently participate in any significant VIEs in which it has a controlling financial interest that it does not consolidate.
There were no changes in facts and circumstances during the period that caused the Company to reassess the method of accounting for its VIEs.
Fair Value Measurements
The net carrying amounts of cash and cash equivalents, trade receivables and payables, and notes payable approximate Fair Value due to the short-term nature of these instruments. Similarly, we believe the carrying value of long-term debt also approximates Fair Value based on the interest rates and scheduled maturities applicable to the outstanding borrowings. Certain other assets and liabilities, such as forward contracts and an interest rate swap agreement we purchased as cash-flow hedges discussed in Note 10 -Commitments and Contingencies, and Derivative Financial Instruments are required to be carried in our Consolidated Financial Statements at Fair Value.
The Fair Value of the Company’s reporting units (needed for purposes of determining whether there is an indication of possible impairment of the carrying value of goodwill) was determined in fiscal years 2010 and 2011 using a market approach that multiplies the after-tax earnings of each reporting unit for the trailing twelve months by the Company’s overall average market earnings multiple. For fiscal year 2012, we used both an income approach and a market approach to test our goodwill for possible impairment. Such approaches require us to make estimates and judgments. Under the income approach, Fair Vale is determined by using the discounted cash flows of our reporting units. Under the market approach, the Fair Value of our reporting units is determined by reference to guideline companies that are reasonably comparable to our reporting units; the Fair Values are estimated based on the valuation multiples of the invested capital associated with the guideline companies. In

F-9

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


assessing whether there is an indication that the carrying value of goodwill has been impaired, we utilize the results of both valuation techniques and consider the range of Fair Values indicated. The range of value (both end of the range) for each reporting unit, exceeded the respective book values by more than 30%.
With respect to share-based payments, we estimate the Fair Value of stock options granted to employees and directors using the Black-Scholes option-pricing model. Like all option-pricing models, the Black-Scholes model requires the use of highly subjective assumptions including (i) the expected volatility of the market price of the underlying stock, and (ii) the expected term of the award, among others. Accordingly, changes in assumptions and any subsequent adjustments to those assumptions can cause drastically different Fair Values to be assigned to our stock option awards. For restricted stock units containing service and performance conditions with measures external to the Company, compensation expense is based on the Fair Value of such units using a Monte Carlo simulation. Due to the uncertainties inherent in the use of assumptions and the results of applying Monte Carlo simulations, the amount of expense recorded in the accompanying consolidated financial statements may not be representative of the effects on our future consolidated financial statements because equity awards tend to vest over several years and additional equity awards may be made in the future.
The Fair Values of the assets owned by the various pension plans that the Company sponsors are determined based on the type of asset, consistent with U.S. GAAP. Equity securities are valued by using market observable data such as quoted prices. Publicly traded corporate equity securities are valued at the last reported sale price on the last business day of the year of the plans. Securities not traded on the last business day are valued at the last reported bid price. Debt securities are valued at the last reported sale price on the last business day applicable. Real estate consists primarily of common or collective trusts, with underlying investments in real estate. They are valued using the best information available, including quoted market prices or market prices for similar assets when available or internal cash flow estimates discounted at an appropriate interest rate or independent appraisals, as appropriate. Insurance contracts, investments in infrastructure/raw goods, and hedge funds are valued using actuarial assumptions and values reported by the fund managers.

The methodologies described above and elsewhere in these Notes to Consolidated Financial Statements may produce a Fair Value measure that may not be indicative of net realizable value or reflective of future Fair Values. Furthermore, while the Company believes its valuation methods are appropriate and consistent with other market participants, the use of different methodologies or assumptions to determine the Fair Value of certain financial instruments could result in a different Fair Value measurement.
Cash Equivalents
We consider all highly liquid investments with original maturities of less than three months to be cash equivalents. Cash equivalents at September 28, 2012 and September 30, 2011 consisted primarily of money market mutual funds and overnight bank deposits.
Receivables and Billings in Excess of Costs
“Receivables” include billed receivables, unbilled receivables, and retentions receivable. Billed receivables represent amounts invoiced to clients in accordance with the terms of our client contracts. They are recorded in our financial statements when they are issued. Unbilled receivables and retentions receivable represent reimbursable costs and amounts earned and reimbursable under contracts in progress as of the respective balance sheet dates. Such amounts become billable according to the contract terms, which usually consider the passage of time, achievement of certain milestones or completion of the project. We anticipate that substantially all of such unbilled amounts will be billed and collected over the next fiscal year.
Certain contracts allow us to issue invoices to clients in advance of providing services. “Billings in excess of costs” represent billings to, and cash collected from, clients in advance of work performed. We anticipate that substantially all such amounts will be earned over the next twelve months.
Property, Equipment, and Improvements
Property, equipment and improvements are carried at cost, and are shown net of accumulated depreciation and amortization in the accompanying Consolidated Balance Sheets. Depreciation and amortization is computed primarily by using the straight-line method over the estimated useful lives of the assets. The cost of leasehold improvements is amortized using the straight-line method over the lesser of the estimated useful life of the asset or the remaining term of the related lease. Estimated useful lives range from 20 to 40 years for buildings, from 3 to 10 years for equipment and from 4 to 10 years for leasehold improvements.

F-10

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Goodwill and Other Intangible Assets
Goodwill represents the excess of the cost of an acquired business over the Fair Value of the net tangible and intangible assets acquired. Goodwill and the cost of intangible assets with indefinite lives are not amortized; instead, we test goodwill for possible impairment. We conduct such tests annually (or more frequently if events occur or circumstances change that would more likely than not reduce the Fair Values of our reporting units below their respective carrying values). The first step in the test is to compare the implied Fair Value of each of the Company’s reporting units to their respective carrying amounts, including goodwill. In the event that the carrying value of a reporting unit exceeds its Fair Value, a second test is performed to measure the amount of the impairment loss, if any. In performing the annual impairment test, the Company evaluates goodwill at the reporting unit level. We have determined that our operating segment is comprised of two reporting units based on geography. Based on the results of these tests, we have determined that the Fair Value of our reporting units substantially exceeded their respective carrying values for fiscal years 2012, 2011, and 2010.

The following table provides certain information related to the Company’s acquired intangible assets for each of the fiscal years presented (in thousands):
 
 
 
Customer
Relationships,
Contracts, and
Backlog
 
Developed
Technology
 
Trade
Names
 
Other
 
Total
Balances, October 2, 2009
 
$
53,675

 
$

 
$
1,508

 
$
2,276

 
$
57,459

Acquisitions
 
50,600

 

 
2,400

 
1,100

 
54,100

Amortization
 
(8,619
)
 

 
(1,851
)
 
(736
)
 
(11,206
)
Foreign currency translation
 
(178
)
 

 
(5
)
 
(125
)
 
(308
)
Balances, October 1, 2010
 
95,478

 

 
2,052

 
2,515

 
100,045

Acquisitions
 
155,512

 
23,000

 
2,744

 
2,542

 
183,798

Amortization
 
(21,239
)
 
(1,023
)
 
(1,214
)
 
(1,225
)
 
(24,701
)
Foreign currency translation
 
(13
)
 

 
(109
)
 
(14
)
 
(136
)
Balances, September 30, 2011
 
229,738

 
21,977

 
3,473

 
3,818

 
259,006

Acquisitions
 
13,010

 

 
1,200

 
410

 
14,620

Amortization
 
(24,406
)
 
(1,533
)
 
(1,430
)
 
(1,597
)
 
(28,966
)
Foreign currency translation
 
(613
)
 

 
(161
)
 
(124
)
 
(898
)
Balances, September 28, 2012
 
$
217,729

 
$
20,444

 
$
3,082

 
$
2,507

 
$
243,762

Weighted average amortization period
 
11.2

 
14

 
12.9

 
6.5

 
11.4

The above table excludes the values assigned to those intangible assets embedded in the Company’s investment in AWE Management Ltd. (“AWE”). Those amounts are included in the carrying value of the Company’s investment in AWE. The amount of amortization expense we estimate we will record during each of the next five fiscal years relating to intangible assets existing at September 28, 2012 including those associated with AWE is: fiscal 2013 - $40.5 million; fiscal 2014 - $27.2 million; fiscal 2015 - $24.6 million; fiscal 2016 - $24.2 million; and fiscal 2017 - $24.1 million.
The change in goodwill during the period relates primarily to businesses acquired during fiscal 2012.
Foreign Currencies
In preparing our consolidated financial statements, it is necessary to translate the financial statements of our subsidiaries operating outside the United States ("U.S."), which are denominated in currencies other than the U.S. dollar, into the U.S. dollar. In accordance with U.S. GAAP, revenues and expenses of operations outside the U.S. are translated into U.S. dollars using weighted-average exchange rates for the applicable period(s) being translated while the assets and liabilities of operations outside the U.S. are generally translated into U.S. dollars using period-end exchange rates. The net effect of foreign currency translation adjustments is included in stockholders’ equity as a component of accumulated other comprehensive income (loss) in the accompanying Consolidated Balance Sheets.
Share-Based Payments
We measure the value of services received from employees and directors in exchange for an award of an equity instrument based on the grant-date Fair Value of the award. The computed value is recognized as a non-cash cost on a straight-

F-11

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


line basis over the period the individual provides services, which is typically the vesting period of the award with the exception of awards containing an internal performance measure which is recognized on a straight-line basis over the vesting period subject to the probability of meeting the performance requirements. The cost of these awards is recorded in selling, general and administrative expense in the Company's Consolidated Financial Statements.

The following table presents our stock-based compensation expense for the various types of awards made by the Company for each of the fiscal years presented (in thousands):
Award Type
 
2012
 
2011
 
2010
Restricted Stock and Restricted
Stock Units (excluding Performance
Awards)
 
$11,021
 
$10,710
 
$7,900
Stock Options
 
14,067
 
16,468
 
16,461
Performance Awards
 
7,354
 
1,906
 
0
Total Expense
 
$32,442
 
$29,084
 
$24,361
The Company has two incentive plans whereby eligible employees and directors of Jacobs may be granted stock options, restricted stock, and/or restricted stock units.
 
Stock Options—The majority of stock options granted during the year are awarded on the same date (although the date is different for employees and directors). The following table presents the assumptions used in the Black-Scholes option-pricing model during each of the last three fiscal years for awards made to employees and directors:
 
 
 
Awards Made to Employees
 
Awards Made to Directors
 
 
2012
 
2011
 
2010
 
2012
 
2011
 
2010
Dividend yield
 
0
%
 
0
%
 
0
%
 
0
%
 
0
%
 
0
%
Expected volatility
 
43.28
%
 
41.54
%
 
43.12
%
 
41.42
%
 
41.97
%
 
40.78
%
Risk-free interest rate
 
0.95
%
 
2.00
%
 
2.54

 
1.11
%
 
2.40
%
 
2.85

Expected term of options (in years)
 
5.82

 
5.82

 
6.14

 
5.82

 
5.82

 
6.29

Performance Awards During fiscal year 2011, the Company granted restricted stock units containing service and performance conditions. The number of restricted stock units in which the employee may ultimately vest is determined using a stock performance multiplier (“SPM”). The SPM is the quotient obtained by dividing the 60 calendar day average market price of our common stock ending on the vesting date (“Ending Average Stock Price”) by the 60 calendar day average market price of our common stock ending on the grant date (“Beginning Average Stock Price”). The maximum SPM is 2 and will be zero if the Ending Average Market Price of our common stock is less than 50% of the Beginning Average Market Price. The number of restricted stock units earned is equal to the target restricted stock units awarded to an employee multiplied by the SPM.
The Company's chief executive officer's restricted stock units are further subject to an additional Total Shareholder Return ("TSR") condition. Specifically, in order to receive full payout of whatever restricted stock unit award was otherwise earned at the end of the three-year performance period, the Company's TSR compared to its peers must be no less than at the 50th percentile. If performance is at the 25th percentile, 50% of the otherwise payable award is paid. No award is payable if TSR is below the 25th percentile. If performance is between the 25th and 50th percentile, the amount of the otherwise payable award is increased from 50% to 100% of the full award on a linear basis.
The majority of restricted stock units with performance conditions granted during the year are awarded on the same date. The following table presents the assumptions used to value the restricted stock units with service and performance conditions:
 
2011
Dividend yield
0
%
Expected volatility
46.67
%
Risk-free interest rate
0.83
%
Expected term (in years)
3


F-12

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


During fiscal year 2012, the Company granted restricted stock units containing service and performance conditions. The restricted stock unit award is split equally between an Earned Relative TSR Restricted Stock Units and an Earned Net Earnings Growth Restricted Stock Units.
The number of Earned Relative TSR Restricted Stock Units in which the employee may ultimately vest shall be equal to 50% of the grant multiplied by the TSR Performance Multiplier. The TSR Performance Multiplier will be determined by comparing the Company's total stockholder return to the total stockholder return of each of the companies in a specified industry peer group over the three-year period immediately following the award date. For purposes of computing total stockholder return, the beginning stock price will be the average closing stock price over the 30 calendar day period ending on the award date, and the ending stock price will be the average closing price over the 30 calendar day period ending on the last day of the performance period. Any dividend payments made over the performance period will be deemed re-invested on the ex-dividend data in additional shares of the related Company.
The following table presents the basis on which the Earned Relative TSR Restricted Stock Units are determined:
Company TSR Percentile Rank
 
TSR Performance Multiplier
Below 30th percentile
 
—%
30th percentile
 
50%
50th percentile
 
100%
70th percentile or above
 
150%

If the Company's total stockholder return over the Performance Period falls between any of the brackets described above, the TSR Performance Multiplier will be determined using straight line interpolation based on the actual percentile ranking.
The following table presents the assumptions used to value the Earned Relative TSR Restricted Stock Units are determined:
 
2012
Dividend yield
0
%
Expected volatility
36.30
%
Risk-free interest rate
0.42
%
Expected term (in years)
3

The number of Earned Net Earnings Growth Restricted Stock Units in which an employee may ultimately vest shall be equal to the sum of the following: (1) An amount, not less than zero, equal to one-third of the Target Restricted Stock Units multiplied by 50% multiplied by the Net Earnings Growth Performance Multiplier (or, "NEGPM", as defined) determined based upon the growth in the Company's Net Earnings (as defined) over the period from April 1, 2012 to March 31, 2013; plus, (2) an amount, not less than zero, equal to (A) two-thirds of the Target Restricted Stock Units multiplied by 50% multiplied by the NEGPM determined based upon the average growth in the Company's Net Earnings over the period from April 1, 2012 to March 31, 2014, minus (B) the amount determined pursuant to (1) above; plus, (3) an amount, not less than zero, equal to (A) the Target Restricted Stock Units multiplied by 50% multiplied by the NEGPM determined based upon the average growth in the Company's Net Earnings over the period from April 1, 2012 to March 31, 2015, minus (B) the amount determined pursuant to (1) and (2) above.
If the Company's average growth in Net Earnings over the applicable fiscal years during the Performance Period is between 5% and 10%, 10% and 15%, or 15% and 20%, the Net Earnings Growth Performance Multiplier will be determined using straight line interpolation based on the actual average growth in the Company's consolidated net earnings.

F-13

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents the basis on which the Earned Net Earnings Growth Restricted Stock Units are determined:
Average Net
Earnings Growth
 
Net Earnings Growth
Performance
Multiplier
Less than 5%
 
—%
5%
 
50%
10%
 
100%
15%
 
150%
20%
 
200%
Unless stated otherwise, all other awards our valued based on the closing price of the Company's commons stock as reported int the NYSE Composite Price History on their respective grant date.
Concentrations of Credit Risk
Our cash balances and short-term investments are maintained in accounts held by major banks and financial institutions located primarily in North America, South America, Europe, Australia, and Asia. In the normal course of business, and consistent with industry practices, we grant credit to our clients without requiring collateral. Concentrations of credit risk is the risk that, if we extend a significant amount of credit to clients in a specific geographic area or industry, we may experience disproportionately high levels of default if those clients are adversely affected by factors particular to their geographic area or industry. Concentrations of credit risk relative to trade receivables are limited due to our diverse client base, which includes the U.S. federal government and multi-national corporations operating in a broad range of industries and geographic areas. Additionally, in order to mitigate credit risk, we continually evaluate the credit worthiness of our major commercial clients.
Use of Estimates and Assumptions
The preparation of financial statements in conformity with U.S. GAAP requires us to employ estimates and make assumptions that affect the reported amounts of certain assets and liabilities; the revenues and expenses reported for the periods covered by the financial statements; and certain amounts disclosed in these Notes to the Consolidated Financial Statements. Although such estimates and assumptions are based on management’s most recent assessment of the underlying facts and circumstances utilizing the most current information available and past experience, actual results could differ significantly from those estimates and assumptions. Our estimates, judgments, and assumptions are evaluated periodically and adjusted accordingly.
Earlier in these Notes to Consolidated Financial Statements, we discussed three significant accounting policies that rely on the application of estimates and assumptions: revenue recognition for long-term construction contracts; the process for testing goodwill for possible impairment; and the accounting for share-based payments to employees and directors. The following is a discussion of certain other significant accounting policies that rely on the use of estimates:
Accounting for Pensions— We use certain assumptions and estimates in order to calculate periodic pension cost and the value of the assets and liabilities of our pension plans. These assumptions involve discount rates, investment returns, and projected salary increases, among others. Changes in the actuarial assumptions may have a material effect on the plans’ liabilities and the projected pension expense. 
Accounting for Income Taxes— We determine our consolidated income tax provision using the asset and liability method prescribed by U.S. GAAP. Under this method, deferred tax assets and liabilities are recognized for the temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and income tax purposes. Such deferred tax assets and liabilities are adjusted, as appropriate, to reflect changes in tax rates expected to be in effect when the temporary differences reverse. If and when we determine that a deferred tax asset will not be realized for its full amount, we will recognize and record a valuation allowance with a corresponding charge to earnings. Judgment is required in determining our worldwide provision for income taxes. In the normal course of business, we may engage in numerous transactions every day for which the ultimate tax outcome (including the period in which the transaction will ultimately be included in taxable income or deducted as an expense) is uncertain. Additionally, we file income, franchise, gross receipts and similar tax returns in many jurisdictions. Our tax returns are subject to audit and investigation by the Internal Revenue Service, most states in the U.S., and by various government agencies representing many jurisdictions outside the U.S.

F-14

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Contractual Guarantees, Litigation, Investigations, and Insurance— In the normal course of business, we are subject to certain contractual guarantees and litigation. We record in the Consolidated Balance Sheets amounts representing our estimated liability relating to such guarantees, litigation, and insurance claims. We perform an analysis to determine the level of reserves to establish for both insurance-related claims that are known and have been asserted against us as well as for insurance-related claims that are believed to have been incurred based on actuarial analysis, but have not yet been reported to our claims administrators as of the respective balance sheet dates. We include any adjustments to such insurance reserves in our Consolidated Statements of Earnings. In addition, as a contractor providing services to various agencies of the U.S. federal government, we are subject to many levels of audits, investigations, and claims by, or on behalf of, the U.S. federal government with respect to contract performance, pricing, costs, cost allocations, and procurement practices. We adjust revenues based upon the amounts we expect to realize considering the effects of any client audits or governmental investigations.
Accounting for Business Combinations— U.S. GAAP requires that the purchase price paid for business combinations accounted for using the acquisition method be allocated to the assets and liabilities acquired based on their respective Fair Values. Determining the Fair Value of contract assets and liabilities acquired often requires estimates and judgments regarding, among other things, the estimated cost to complete such contracts. The Company must also make certain estimates and judgments relating to other assets and liabilities acquired as well as any identifiable intangible assets acquired.
New Accounting Pronouncements
In July 2012, the FASB adopted ASU No. 2012-02—Testing Indefinite-Lived Intangible Assets for Impairment. ASU 2012-02 amends Topic 350 of the FASB's ASC regarding how entities test indefinite-lived intangible assets other than goodwill for possible impairment. ASU 2012-02 permits entities first to assess qualitative factors to determine whether it is more likely than not that an indefinite lived intangible asset is impaired as a basis for determining whether it is necessary to perform the quantitative impairment test pursuant to ASC Subtopic 350-30. If the entity determines that is is more likely than not that such asset is not impaired based on its qualitative assessment, no further testing is required. The amendments in ASU 2012-02 are effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012. The Company does not believe that the adoption of ASU 2012-02 will have a material effect on its consolidated financial statements.
In December 2011, the FASB adopted ASU No. 2011-12—Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of items Out of Accumulated Other Comprehensive Income in Accounting Standards Update No. 2011-05. ASU 2011-12 amends Topic 220 of the ASC as that Topic was affected by ASU 2011-05. ASU 2011-05 required entities to, among other things, present reclassification adjustments and the effect of such adjustment on the face of the financial statements where net earnings is presented, by component of net earnings, and on the face of the financial statements where other comprehensive income is presented, by component of other comprehensive income. The effect of ASU 2011-12 is to defer the effective date of certain of the presentation requirements of ASU 2011-05 in order to give the FASB more time to deliberate such requirements. The amendments in ASU 2011-12 are effective at the same time as the amendments in ASU 2011-05 so that entities will not be required to comply with the presentation requirements in Update 2011-05 that ASU 2012-12 is deferring.
Also in December 2011, the FASB adopted ASU No. 2011-11—Disclosures about Offsetting Assets and Liabilities. ASU 2011-11 amends Topic 210 of the ASC and requires entities to disclose information about offsetting and related arrangements to enable users of their financial statements to understand the effect of those arrangements on their respective financial positions. The scope of this ASU includes derivatives, sale and repurchase agreements, reverse sale and repurchase agreements, and securities borrowing and securities lending agreements. Entities are required to apply the provisions of ASU 2011-11 for annual reporting periods beginning on or after January 1, 2013. The Company does not believe that the adoption of ASU 2011-11 will have a material effect on its consolidated financial statements.
 
In September 2011, the FASB issued ASU 2011-08—Intangibles-Goodwill and Other. ASU 2011-08 amends Topic 350 of the ASC and simplifies how entities test goodwill for possible impairment. Under this ASU, an entity has the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If, after assessing the totality of events or circumstances, an entity determines it is not more likely than not that the fair value of a reporting unit is less than its carrying amount, then performing the two-step impairment test is unnecessary. However, if an entity concludes otherwise, then it is required to perform the first step of the two-step impairment test by calculating the fair value of the reporting unit and comparing the fair value with the carrying amount of the reporting unit. Under this ASU, an entity has the option to bypass the qualitative assessment for any reporting unit in any period and proceed directly to performing the first step of the two-step goodwill impairment test. An entity may resume performing the qualitative assessment in any subsequent period. ASU 2011-08 is effective for annual and interim goodwill impairment tests performed for fiscal years beginning after December 15, 2011.

F-15

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The Company does not believe that the adoption of ASU 2011-08 will have a material effect on its consolidated financial statements.
In June 2011, the FASB issued ASU 2011-05—Comprehensive Income. ASU 2011-05 amends Topic 220 of the ASC and provides that an entity has the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In both choices, an entity is required to present each component of net income along with total net income, each component of other comprehensive income along with a total for other comprehensive income, and a total amount for comprehensive income. The provisions of ASU 2011-05 will be applied retrospectively and are effective for fiscal years, and interim periods within those years, beginning after December 15, 2011. The Company is currently evaluating the impact of ASU 2011-05, if any, on its consolidated financial statements.

3. Business Combinations
Fiscal 2012 Acquisitions
In August 2012, we acquired a consulting project management business based in Sydney, Australia. The acquisition is an important step in our strategy to expand our geographic presence and grow our infrastructure business in Australia.
In July 2012, we acquired a majority ownership of DM Petroleum Operations Company ("DMP") headquartered in New Orleans, Louisiana. DMP manages and operates the Strategic Petroleum Reserve ("SPR") under contract to the U.S. Department of Energy. The SPR is the world's largest reserve of emergency crude oil, and DMP has been the SPR Management and Operating contractor since 1993. DMP builds on our locally-based petroleum operations and maintenance expertise.
In December 2011, we acquired Unique World Pty Ltd., headquartered in Sydney, Australia. Unique World is a leading information management and knowledge management consultancy specializing in enabling technologies such as collaboration, business process automation, business intelligence, intranets, and portals. Unique World expands the Company's capabilities in Australia to include such IT services, as well as expanding the client base to which we can offer these services.
In November 2011, we acquired KlingStubbins, Inc., a 500-person firm headquartered in Philadelphia, Pennsylvania, with offices located throughout the U.S. and in China. KlingStubbins provides professional services in the areas of architecture, engineering, interiors, planning, and landscape architecture. The markets served by KlingStubbins include corporate / commercial, governmental, science and technology, higher education, mission critical, and interiors.
The results of operations of these acquired businesses have been included in the Company's consolidated results of operations commencing with the dates control of the acquired businesses was obtained. The above acquisitions were not material to the Company’s consolidated financial statements at September 28, 2012 and for the year then ended. The Company continues to assess the fair values of the assets and liabilities acquired, and will complete the allocation within the measurement period prescribed by U.S. GAAP.
The Aker Solutions ASA Transactions
During the second quarter of fiscal 2011, we acquired certain operations within the process and construction business of Aker Solutions ASA, and in April 2011 we completed the acquisition of Aker Projects (Shanghai) Company Limited (together, the "Aker Entities"). The acquisition of the Aker Entities is described in more detail on pages 6 and F-16 of our 2011 Form 10-K. Consistent with most other business combinations we have completed, we began integrating the Aker Entities into our existing operations shortly after the businesses were acquired. Accordingly, it is not practicable to provide complete financial information for fiscal 2012 on a stand-alone basis for the Aker Entities.
The purchase price consisted of $675 million plus approximately $234.6 million representing the value of certain transactions specified in the share purchase agreement (“SPA”) and a preliminary estimate of net cash and working capital acquired. Prior to the acquisition of the Aker Entities, the seller completed certain transactions that could have affected the amounts of net cash and net working capital of the operations acquired. The parties therefore negotiated into the SPA a "net cash and working capital adjustment" by which the net cash and working capital of the acquired operations were compared to target amounts specified in the SPA and which, after considering bands within which no settlement would be required, may cause one party to pay cash to the other. The final adjustment amount was determined in accordance with the terms of the SPA in the fourth quarter of fiscal 2011 and no payment was made by either party.
During the second quarter of fiscal 2012, the Company completed the purchase price allocation of the Aker Entities.

F-16

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The Company recorded a number of Fair Value adjustments affecting, among other things, the estimated liabilities related to certain projects; the final, estimated liabilities relating to acquired professional liability exposures; and other adjustments to the working capital of the balance sheets of the acquired businesses, the total of which fell within the purchase price adjustment band described in the preceding paragraph.
The following table presents the final allocation of the purchase price to the net assets acquired, excluding intangibles and goodwill (in thousands):
Assets:
 
Cash and cash equivalents
$
329,689

Receivables and other current assets
163,214

Property and equipment, and other assets
115,688

Total assets
608,591

Liabilities:
 
Current liabilities
292,003

Long-term liabilities
22,534

Total liabilities
314,537

Net assets acquired
$
294,054


The following table presents the values assigned to the identifiable intangible assets acquired in the Aker Entities transactions (in thousands):
Customer relationships / backlog
$
136,000

Technology
23,000

Total
$
159,000

The carrying values of intangible assets subject to amortization are included in “Other Noncurrent Assets” in the accompanying Consolidated Balance Sheet at September 28, 2012, and are being amortized over lives that range from 1 year to 15 years (the weighted average life for all intangibles is 12.8 years).
The amount of goodwill created as a result of the Aker Entities transactions is summarized as follows (in thousands):
 
 
Purchase price
$
910,000

Amount assigned to net assets acquired
(294,054
)
Amount assigned to identifiable intangible assets
(159,000
)
Deferred taxes related to intangible assets
55,000

Goodwill recognized
$
511,946

Some of the factors contributing to a purchase price that resulted in the recognition of goodwill include: (i) access to a large, highly-trained and stable workforce; (ii) the opportunity to expand our client base in the U.S., the United Kingdom, Canada, Australia, and China; (iii) the opportunity to enter new geographic markets in South America; (iv) the opportunity to expand our presence in the mining and minerals market; and (v) the opportunity of achieving operating synergies.

F-17

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)



Other Matters
We do not expect a material amount of the goodwill recognized during fiscal 2012 and fiscal 2011 to be deductible for income tax purposes.
Included in selling, general and administrative expense for fiscal 2012 and fiscal 2011 is $5.8 million and $15.2 million, respectively of acquisition-related costs pertaining to our acquisition activities.
The Company has retrospectively adjusted certain fiscal 2011 comparative financial information for significant purchase accounting adjustments identified during the respective measurement periods of the related acquisitions. During fiscal 2012, the Company recorded adjustments increasing the Fair Values of accrued liabilities by $100.1 million, income taxes payable by $10.4 million, and other deferred liabilities by $39.3 million. These amounts were offset by an increase in goodwill of $127.1 million and $22.7 million in deferred income tax assets. These purchase price adjustments related primarily to income tax exposures and project exposures. The basis for valuing the liabilities recorded for the income tax exposure was assessments received from taxing authorities, and the basis for valuing the projected-related liabilities was management's best estimate of the costs to complete the associated projects in excess of the respective contract values.

4. Stock Purchase and Stock Option Plans
Broad-Based, Employee Stock Purchase Plans
The 1989 ESPP and the GESPP are employee stock purchase plans under which employees are granted the right to purchase shares of the common stock of Jacobs at a discount that is limited to 5% of the per-share market value on the day shares are sold to employees.
The following table summarizes the stock issuance activity under the 1989 ESPP and the GESPP during each of the last three fiscal years:
 
 
2012
 
2011
 
2010
Aggregate Purchase Price Paid for Shares Sold:
 
 
 
 
 
 
Under the 1989 ESPP
 
$
32,236,660

 
$
31,887,660

 
$
30,042,431

Under the GESPP
 
2,944,987

 
2,894,302

 
2,850,202

Total
 
$
35,181,647

 
$
34,781,962

 
$
32,892,633

Aggregate Number of Shares Sold:
 
 
 
 
 
 
Under the 1989 ESPP
 
853,819

 
771,818

 
802,508

Under the GESPP
 
76,360

 
69,386

 
74,848

Total
 
930,179

 
841,204

 
877,356

At September 28, 2012, there were 3,056,696 shares reserved for issuance under the 1989 ESPP, and there were 337,031 shares reserved for issuance under the GESPP.
 

F-18

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Stock Incentive Plans
We also sponsor the 1999 SIP and the 1999 ODSP. The 1999 SIP provides for the issuance of incentive stock options, nonqualified stock options, restricted stock, and restricted stock units to employees. The 1999 ODSP provides for awards of shares of common stock, restricted stock, and restricted stock units, and grants of nonqualified stock options to our outside (i.e., nonemployee) directors. The 1999 SIP and the 1999 ODSP (together, the “1999 Plans”) replaced the1981 Plan. The following table sets forth certain information about the 1999 Plans:
 
 
1999 SIP
 
1999 ODSP
 
Total
Number of shares authorized
 
18,700,000

 
800,000

 
19,500,000

Number of remaining shares reserved for issuance at September 28, 2012
 
5,952,853

 
439,500

 
6,392,353

Number of shares relating to outstanding stock options at September 28, 2012
 
5,505,859

 
250,875

 
5,756,734

Number of shares available for future awards:
 
 
 
 
 
 
At September 28, 2012
 
446,994

 
188,625

 
635,619

At September 30, 2011
 
2,050,107

 
200,625

 
2,250,732

The number of shares of common stock that may be awarded under the 1999 SIP in the form of restricted stock is limited to 4,870,000 shares, and shares of restricted stock that are subsequently forfeited become available again for issuance as restricted stock. At September 28, 2012, there were a total of 446,994 shares of common stock that remained available for issuance in the form of restricted stock under the 1999 SIP.
The following table presents the Fair Value of shares (of restricted stock and restricted stock units) vested during each of the last three fiscal years (in thousands):
2012
 
2011
 
2010
$
7,955

 
$
4,848

 
$
4,188

The following table presents the Company’s total pre-tax compensation cost relating to share-based payments included in the accompanying Consolidated Statements of Earnings (in thousands): 
2012
 
2011
 
2010
$
32,442

 
$
29,084

 
$
24,361


F-19

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)



The following table summarizes the stock option activity under the 1999 Plans and the 1981 Plan for each of the last three fiscal years:
 
 
 
Number of
Stock
Options
 
Weighted
Average
Exercise
Price
Outstanding at October 2, 2009
 
7,031,017

 
$
37.43

Granted
 
975,000

 
$
43.79

Exercised
 
(447,200
)
 
$
15.90

Cancelled or expired
 
(148,237
)
 
$
60.39

Outstanding at October 1, 2010
 
7,410,580

 
$
39.10

Granted
 
433,600

 
$
46.04

Exercised
 
(1,363,005
)
 
$
21.37

Cancelled or expired
 
(19,665
)
 
$
47.81

Outstanding at September 30, 2011
 
6,461,510

 
$
43.28

Granted
 
658,700

 
$
37.45

Exercised
 
(1,281,449
)
 
$
22.54

Cancelled or expired
 
(82,027
)
 
$
43.92

Outstanding at September 29, 2012
 
5,756,734

 
$
47.23


Stock options outstanding at September 28, 2012 consisted entirely of nonqualified stock options. The following table presents the total intrinsic value of stock options exercised during each of the last three fiscal years (in thousands):
2012
 
2011
 
2010
26,196

 
34,665

 
11,764

The total intrinsic value of stock options exercisable at September 28, 2012 was approximately $11.0 million. The following table presents certain other information regarding our stock incentive plans:
 
 
2012
 
2011
 
2010
At fiscal year end:
 
 
 
 
 
 
Range of exercise prices for options outstanding
 
$18.49–$94.11
 
$13.29–$94.11
 
$10.79-$94.11
Number of options exercisable
 
4,219,557

 
4,822,297

 
5,441,883

For the fiscal year:
 
 
 
 
 
 
Range of prices relating to options exercised
 
$13.29–$37.73

 
$10.785–$41.18

 
$7.03–$37.35

Estimated weighted average Fair Values of options granted
 
$
15.55

 
$
19.43

 
$
19.33



F-20

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents certain information regarding stock options outstanding, and stock options exercisable at September 28, 2012:
 
 
Options Outstanding
 
Options Exercisable
Range of Exercise Prices
 
Number
 
Weighted
Average
Remaining
Contractual
Life
(years)
 
Weighted
Average
Price
 
Number
 
Weighted
Average
Exercise
Price
$18.49 - $18.49
 
12,000

 
0.42
 
18.49

 
12,000

 
18.49

$19.96 - $26.795
 
472,085

 
0.94
 
20.96

 
472,085

 
20.96

$32.51 - $37.35
 
1,027,550

 
5.83
 
37.15

 
448,800

 
37.33

$37.43 - $46.86
 
2,686,175

 
4.94
 
42.81

 
1,909,068

 
42.84

$47.11 - $55.04
 
373,550

 
7.80
 
48.39

 
192,230

 
48.28

$56.95 - $57.81
 
515,375

 
1.73
 
56.97

 
515,375

 
56.97

$76.15 - $83.61
 
79,375

 
3.24
 
81.34

 
79,375

 
81.34

$88.19 - $94.11
 
590,624

 
2.58
 
92.57

 
590,624

 
92.57

 
 
5,756,734

 
4.39
 
47.23

 
4,219,557

 
49.40

Our stock incentive plans allow participants to satisfy the exercise price of stock options by tendering shares of Jacobs common stock that have been owned by the participants for at least six months. Shares so tendered are retired and canceled, and are shown as repurchases of common stock in the accompanying Consolidated Statements of Stockholders’ Equity.
At September 28, 2012, the amount of compensation cost relating to nonvested awards not yet recognized in the financial statements is approximately $91.0 million. The majority of the unrecognized compensation costs will be recognized by the third quarter of fiscal 2014. The weighted average remaining contractual term of options currently exercisable is 2.9 years.
The following table presents the number of shares of restricted stock and restricted stock units issued under the 1999 Plans during each of the last three fiscal years:
 
 
2012
 
2011
 
2010
Restricted stock issued
 
497,100

 
226,850

 
525,600

Restricted stock units issued (service condition)
 
124,450

 
12,100

 
9,000

Restricted stock units issued (service and performance conditions at target)
 
525,000

 
291,700

 

The amount of restricted stock units issued for awards with performance conditions in the above table is based on the target amount. The number of shares ultimately issued, which could be greater or less than target, will be based on achieving specific performance conditions described in Note 2 – Significant Accounting Policies.
The restrictions attached to restricted stock and restricted stock units generally relate to the recipient’s ability to sell or otherwise transfer the stock or stock units. There are also restrictions that subject the stock and stock units to forfeiture back to the Company until earned by the recipient through continued employment or service. At September 28, 2012, there were 1,437,830 shares of restricted stock; 152,840 shares of restricted stock units (service condition) and 794,700 shares of restricted stock units (service and performance conditions) outstanding under the 1999 Plans.



F-21

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


5. Earnings Per Share
The following table (i) reconciles the denominator used to compute Basic EPS to the denominator used to compute Diluted EPS for each of the last three fiscal years, and (ii) discloses the number of antidilutive stock options and restricted stock outstanding at the end of each of the fiscal years indicated (in thousands):
 
 
2012
 
2011
 
2010
Shares used to calculate EPS:
 
 
 
 
 
 
Weighted average shares outstanding
(denominator used to compute basic EPS)
 
127,644

 
125,686

 
124,134

Effect of stock options and restricted stock
 
1,048

 
1,549

 
1,656

Denominator used to compute diluted EPS
 
128,692

 
127,235

 
125,790

Antidilutive stock options and restricted stock
 
5,093

 
4,507

 
3,814


6. Borrowings
Short-Term Credit Arrangements
The Company maintains both committed and uncommitted credit arrangements with several banks providing for short-term borrowing capacity and overdraft protection. There were no amounts outstanding under these short-term credit facilities at September 28, 2012, and there was $2.2 million outstanding under these facilities at an interest rate of 6.0% at September 30, 2011.
Long-term Debt and Credit Arrangements
The following table presents certain information regarding the Company’s various long-term debt and credit facilities at September 28, 2012 and September 30, 2011 (dollars in thousands):
 
 
2012
 
2011
 
 
Principal
Balance
Outstanding
 
Range
of Interest
Rates
 
Principal
Balance
Outstanding
 
Range
of Interest
Rates
$1.21 Billion revolving credit facility
 
$
528,260

 
0.95 – 1.41%

 
$

 

$290.0 Million revolving credit facility
 
$

 
%
 
$
171,788

 
0.96 – 1.57%

Bilateral loan agreements
 
$

 
%
 
$
392,059

 
1.0 – 2.15%

On March 29, 2012, the Company and certain of its subsidiaries entered into a $1.21 billion unsecured, revolving credit facility (the "2012 Facility") with a syndicate of large, U.S. and international banks and financial institutions. The 2012 Facility replaces and refinances the Company's previous, $290.0 million, unsecured revolving credit facility originally entered into by the Company on December15, 2005 (the "2005 Facility"). All commitments under the 2005 Facility were terminated effective the closing date and all amounts due thereunder were refinanced under the 2012 Facility. The total amount utilized under this facility at September 28, 2012 was $540.4 million ($528.3 million in the form of direct borrowings and $12.1 million utilized in the form of letters of credit).
The 2012 Facility has a five year maturity and permits the Company to borrow under three separate tranches in U.S. dollars, certain specified foreign currencies, and any other currency that may be approved in accordance with the terms of the 2012 Facility. Depending on the Company's Consolidated Leverage Ratio, borrowings under the 2012 Facility will bear interest at either a eurocurrency rate plus a margin of between 0.875% and 1.225% or a base rate plus a margin of between 0% and 0.225%. The 2012 Facility also provides for a financial letter of credit subfacility of $300.0 million, permits performance letters of credit, and provides for a $50.0 million subfacility for swingline loans. Letters of credit are subject to fees based on the Company's Consolidated Leverage Ratio at the time any such letter of credit is issued. The Company pays a facility fee of between 0.125% and 0.275% per annum depending on the Company's Consolidated Leverage Ratio. Amounts outstanding under the 2012 Facility may be prepaid at the option of the Company without premium or penalty, subject to customary breakage fees in connection with the prepayment of eurocurrency loans. The 2012 Facility contains affirmative, negative, and financial covenants customary for financings of this type including, among other things, limitations on certain other indebtedness, loans and investments, liens, mergers, asset sales and transactions with affiliates. In addition, the 2012 Facility contains customary events of default. We were in compliance with our debt covenants at September 28, 2012.

F-22

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Included in the line “Bilateral loan agreements” for fiscal 2011 are amounts outstanding under several credit agreements we entered into with major U.S. and Inernational banks in connection with the Company's merger and acquisition activities. Amounts outstanding under these lines were either repaid during fiscal 2012 or refinanced under the 2012 Facility. Interest under these facilities was based on Libor plus 0.75%. The following table presents certain additional information regarding the Company’s various loan agreements for the fiscal years shown:
 
 
2012
 
2011
Maximum amount outstanding at any month-end
   during the fiscal year
 
$
586,933

 
$
675,083

Average amount outstanding during the year
 
$
537,131

 
$
403,649

Weighted average interest rate during the year
 
1.32
%
 
1.81
%
Included in “Long-term Debt” in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 are amounts relating to a real estate mortgage and other, miscellaneous indebtedness assumed in connection with various business combinations.
 
The following table presents the amount of interest paid by the Company during each of the last three fiscal years (in thousands):
2012
 
2011
 
2010
$
8,572

 
$
7,778

 
$
11,702

Included in the above amounts for fiscal 2010 is approximately $9.9 million of interest paid in connection with the SIVOM Judgment.
7. Pension Plans
Company-Only Sponsored Plans
We sponsor various defined benefit pension plans covering employees of certain U.S. and international subsidiaries. The pension plans provide pension benefits that are based on the employee’s compensation and years of service. Our funding policy is to fund the actuarially determined accrued benefits, allowing for projected compensation increases using the projected unit method.
The accounting for pension plans requires the use of assumptions and estimates in order to calculate periodic pension cost and the value of the plans’ assets and liabilities. These assumptions include discount rates, investment returns, and projected salary increases, among others. The discount rates used in valuating the plans' liabilities were determined with reference to high quality corporate/government bonds that are appropriately matched to the duration of each plan's obligations except for our plans in India where we used appropriate estimates as high quality corporate/government bond rates are not available. The expected long-term rate of return on plan assets, with the exception of plans in Belgium (where the assets are invested in an insurance product that provides guaranteed returns) and India (where asset returns are generally set using government bond yields), is based on a simulation model which selects a single outcome for expected return based on the target asset allocation. The model simulates interest rates, inflation and asset class returns for up to 20 years and for 500 economic scenarios to generate a rage of likely outcomes. The expected long-term-rate of return used in the valuation are the annual average returns generated by these assumptions over a 15 year period for each asset class based on the expected long-term rate of return of the underlying assets.

F-23

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table sets forth the changes in the plans’ combined net benefit obligation (segregated between plans existing within and outside the U.S.) during each of the fiscal years presented (in thousands):
 
 
U.S. Pension Plans
 
Non-U.S. Pension Plans
 
 
2012
 
2011
 
2012
 
2011
Net benefit obligation at the
    beginning of the year
 
$
482,542

 
$
160,264

 
$
968,938

 
$
1,007,105

Service cost
 
12,838

 
10,684

 
22,723

 
30,816

Interest cost
 
20,923

 
21,377

 
54,287

 
54,631

Participants’ contributions
 
3,200

 
3,318

 
11,614

 
12,108

Actuarial (gains)/losses
 
20,342

 
30,378

 
142,935

 
(141,498
)
Benefits paid
 
(10,978
)
 
(34,486
)
 
(30,180
)
 
(32,419
)
Curtailments and settlements
 
(27,702
)
 

 
(6,118
)
 
(3,744
)
Plan amendments
 

 

 
(2,294
)
 

Business combinations/consolidations
 
8,440

 
290,887

 
8,933

 
49,638

Special termination benefits
 

 
120

 

 

Effect of exchange rate changes
 

 

 
20,507

 
(7,699
)
Net benefit obligation at the end
    of the year
 
$
509,605

 
$
482,542

 
$
1,191,345

 
$
968,938

The following table sets forth the changes in the combined Fair Value of the plans’ assets (segregated between plans existing within and outside the U.S.) during each of the fiscal years presented (in thousands):
 
 
U.S. Pension Plans
 
Non-U.S. Pension Plans
 
 
2012
 
2011
 
2012
 
2011
Fair Value of plan assets at the
    beginning of the year
 
$
285,777

 
$
107,791

 
$
744,689

 
$
661,825

Actual return on plan assets
 
62,635

 
1,899

 
91,987

 
3,729

Employer contributions
 
42,606

 
21,753

 
48,374

 
70,575

Participants’ contributions
 
3,200

 
3,318

 
11,614

 
12,108

Gross benefits paid
 
(10,978
)
 
(34,486
)
 
(30,180
)
 
(32,419
)
Business combinations/consolidations
 
3,810

 
185,502

 
4,272

 
40,922

Curtailments/settlements
 
(27,702
)
 

 
(6,085
)
 
(3,744
)
Effect of exchange rate changes
 

 

 
13,279

 
(8,307
)
Fair Value of plan assets at the
    end of the year
 
$
359,348

 
$
285,777

 
$
877,950

 
$
744,689

 
The following table reconciles the combined funded statuses of the plans recognized in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 (segregated between plans existing within and outside the U.S.) (in thousands):
 
 
U.S. Pension Plans
 
Non-U.S. Pension Plans
 
 
2012
 
2011
 
2012
 
2011
Net benefit obligation at the end
    of the year
 
$
509,605

 
$
482,542

 
$
1,191,345

 
$
968,938

Fair Value of plan assets at the end
    of the year
 
359,348

 
285,777

 
877,950

 
744,689

Under funded amount recognized
    at the end of the year
 
$
150,257

 
$
196,765

 
$
313,395

 
$
224,249


F-24

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents the accumulated benefit obligation at September 28, 2012 and September 30, 2011 (segregated between plans existing within and outside the U.S.) (in thousands):
 
 
U.S. Pension Plans
 
Non-U.S. Pension Plans
 
 
2012
 
2011
 
2012
 
2011
Accumulated benefit obligation at the
   end of the year
 
$
460,618

 
$
432,109

 
$
1,109,413

 
$
909,746

The following table presents the amounts recognized in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 (segregated between plans existing within and outside the U.S.) (in thousands):
 
 
U.S. Pension Plans
 
Non-U.S. Pension Plans
 
 
2012
 
2011
 
2012
 
2011
Accrued benefit cost included in
    noncurrent assets
 
$

 
$

 
$
13,174

 
$

Accrued benefit cost included in
    current liabilities
 

 

 
2,271

 
1,690

Accrued benefit cost included in
    noncurrent liabilities
 
150,257

 
196,765

 
324,298

 
222,559

Net amount recognized at the end of
    the year
 
$
150,257

 
$
196,765

 
$
313,395

 
$
224,249

Included in the tables are amounts relating to a U.S. pension plan the participating employees in which are assigned to, and work exclusively on, a specific operating contract with the U.S. federal government. It is the intention of the parties to this contract that the cost of this pension plan will be fully reimbursed by the U.S. federal government pursuant to applicable cost accounting standards. Accordingly, included in “Other Noncurrent Assets” in the accompanying Consolidated Balance Sheet at September 28, 2012 is a receivable from the U.S. federal government of approximately $101.4 million ($140.9 million at September 30, 2011) representing the underfunded amount for this pension plan.
The following table presents the significant actuarial assumptions used in determining the funded statuses and benefit cost of the Company’s U.S. plans for each fiscal year presented:
 
 
2012
 
2011
 
2010
Weighted average discount rates
 
3.4% to 3.9%

 
4.3% to 4.6%

 
4.60
%
Rates of compensation increases
 
3.25
%
 
3.5
%
 

Expected long-term rates of return
  on plan assets
 
7.5
%
 
7.5
%
 
8.0
%
The following table presents the significant actuarial assumptions used in determining the funded statuses and benefit cost of the Company’s Non-U.S. plans for each fiscal year presented:
 
 
2012
 
2011
 
2010
Weighted average discount rates
 
0.6% to 8.4%
 
2.6% to 5.9%
 
2.1% to 5.1%
Rates of compensation increases
 
2.8% to 7.5%
 
3.0% to 3.5%
 
3.25% to 3.5%
Expected long-term rates of return
  on plan assets
 
2.4% to 8.5%
 
4.75% to 7.1%
 
2.2% to 7.6%
The following table presents certain amounts relating to our U.S. pension plans recognized in accumulated other comprehensive loss at September 28, 2012 and September 30, 2011 (in thousands):
 
 
2012
 
2011
 
2010
Arising during the period:
 
 
 
 
 
 
Net actuarial loss
 
$
2,756

 
$
7,486

 
$
8,297

Reclassification adjustments:
 
 
 
 
 
 
Net actuarial gain
 
(2,011
)
 
(2,011
)
 
(1,154
)
Total
 
$
745

 
$
5,475

 
$
7,143



F-25

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents certain amounts relating to our Non-U.S. pension plans recognized in accumulated other comprehensive loss at September 28, 2012 and September 30, 2011 (in thousands):
 
 
2012
 
2011
 
2010
Arising during the period:
 
 
 
 
 
 
Net actuarial (gain) loss
 
$
83,298

 
$
(73,258
)
 
$
64,809

Prior service cost (benefit)
 
(1,947
)
 
1,005

 
(117
)
Total
 
81,351

 
(72,253
)
 
64,692

Reclassification adjustments:
 
 
 
 
 
 
Net actuarial gain
 
(6,131
)
 
(4,990
)
 
(7,646
)
Prior service benefit
 
(23
)
 
(1,406
)
 
(193
)
Total
 
(6,154
)
 
(6,396
)
 
(7,839
)
Total
 
$
75,197

 
$
(78,649
)
 
$
56,853

The following table presents certain amounts relating to our pension plans recorded in accumulated other comprehensive loss that have not yet been recognized as components of net periodic pension cost at September 28, 2012 and September 30, 2011 (segregated between plans existing within and outside the U.S.) (in thousands):
 
 
U.S. Pension Plans
 
Non-U.S. Pension Plans
 
 
2012
 
2011
 
2012
 
2011
Net actuarial loss
 
$
68,970

 
$
68,224

 
$
201,726

 
$
124,560

Prior service cost
 

 

 
(803
)
 
1,166

Total
 
$
68,970

 
$
68,224

 
$
200,923

 
$
125,726

The following table presents the amount of accumulated comprehensive income that will be amortized against earnings as part of our net periodic pension cost in fiscal 2013(segregated between plans existing within and outside the U.S.) (in thousands):
 
 
U.S.
Pension
Plans
 
Non-U.S.
Pension
Plans
Unrecognized net actuarial loss
 
$
8,030

 
$
13,788

Unrecognized prior service cost
 
(103
)
 
(55
)
Accumulated comprehensive loss to be recorded against earnings
 
$
7,927

 
$
13,733

We consider various factors in developing the estimates for the expected, long-term rates of return on plan assets. These factors include the projected, long-term rates of returns on the various types of assets in which the plans invest, as well as historical returns. In general, investment allocations are determined by each plan’s trustees and/or investment committees. The objectives of the plans’ investment policies are to (i) maximize returns while preserving capital; (ii) provide returns sufficient to meet the current and long-term obligations of the plan as the obligations become due; and (iii) maintain a diversified portfolio of assets so as to reduce the risk associated with having a disproportionate amount of the plans’ total assets invested in any one type of asset, issuer or geography. None of our pension plans hold Jacobs common stock directly (although some plans may hold shares indirectly through investments in mutual funds). The plans’ weighted average asset allocations at September 28, 2012 and September 30, 2011 (the measurement dates used in valuing the plans’ assets and liabilities) were as follows:
 
 
U.S. Pension Plans
 
Non-U.S. Pension Pans
 
 
2012
 
2011
 
2012
 
2011
Equity securities
 
72
%
 
68
%
 
41
%
 
41
%
Debt securities
 
21
%
 
23
%
 
37
%
 
37
%
Real estate investments
 
1
%
 
2
%
 
6
%
 
6
%
Other
 
6
%
 
7
%
 
16
%
 
16
%
 

F-26

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents the Fair Value of the Company’s U.S. pension plan assets at September 28, 2012 segregated by level of Fair Value measurement inputs within the fair value hierarchy promulgated by U.S. GAAP (in thousands):
 
 
Fair Values By Level of
Fair Value Measurement Inputs
 
 
Level 1
 
Level 3
 
Total
U.S. Domestic equities
 
$
230,862

 
$

 
$
230,862

Overseas equities
 
27,343

 

 
27,343

U.S. Domestic bonds
 
75,648

 

 
75,648

Cash and equivalents
 
6,183

 

 
6,183

Real estate
 

 
4,841

 
4,841

Hedge funds
 

 
14,471

 
14,471

Total
 
$
340,036

 
$
19,312

 
$
359,348

The following table presents the Fair Value of the Company’s Non-U.S. pension plan assets at September 28, 2012 segregated by level of Fair Value measurement inputs within the fair value hierarchy promulgated by U.S. GAAP (in thousands):
 
 
Fair Values By Level of
Fair Value Measurement Inputs
 
 
Level 1
 
Level 3
 
Total
U.S. Domestic equities
 
$
193,715

 
$

 
$
193,715

Overseas equities
 
168,097

 

 
168,097

U.S. Domestic bonds
 
306,974

 

 
306,974

Overseas bonds
 
14,254

 

 
14,254

Cash and equivalents
 
27,571

 

 
27,571

Infrastructure / Raw goods
 

 
6,111

 
6,111

Real estate
 

 
49,537

 
49,537

Insurance contracts
 

 
18,291

 
18,291

Hedge funds
 

 
93,400

 
93,400

Total
 
$
710,611

 
$
167,339

 
$
877,950

The following table presents the Fair Value of the Company’s U.S. pension plan assets at September 30, 2011 segregated by level of Fair Value measurement inputs within the Fair Value hierarchy promulgated by U.S. GAAP (in thousands):
 
 
Fair Values By Level of
Fair Value Measurement Inputs
 
 
Level 1
 
Level 3
 
Total
U.S. Domestic equities
 
$
172,986

 
$

 
$
172,986

Overseas equities
 
22,057

 

 
22,057

U.S. Domestic bonds
 
66,333

 

 
66,333

Cash and equivalents
 
4,203

 

 
4,203

Real estate
 

 
5,353

 
5,353

Hedge funds
 

 
14,845

 
14,845

Total
 
$
265,579

 
$
20,198

 
$
285,777



F-27

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents the Fair Value of the Company’s Non-U.S. pension plan assets at September 30, 2011 segregated by level of Fair Value measurement inputs within the Fair Value hierarchy promulgated by U.S. GAAP (in thousands):
 
 
Fair Values By Level of
Fair Value Measurement Inputs
 
 
Level 1
 
Level 3
 
Total
U.S. Domestic equities
 
$
156,264

 
$

 
$
156,264

Overseas equities
 
149,926

 

 
149,926

U.S. Domestic bonds
 
262,377

 

 
262,377

Overseas bonds
 
13,794

 

 
13,794

Cash and equivalents
 
14,486

 

 
14,486

Infrastructure / Raw Goods
 

 
4,776

 
4,776

Real estate
 

 
43,997

 
43,997

Insurance contracts
 

 
17,293

 
17,293

Hedge funds
 

 
81,776

 
81,776

Total
 
$
596,847

 
$
147,842

 
$
744,689

The following table summarizes the changes in the Fair Value of the Company’s U.S. Plans’ Level 3 assets for the year ended September 28, 2012 (in thousands):
 
 
Real
Estate
 
Hedge
Funds
Balance, beginning of year
 
$
5,353

 
$
14,845

Realized and unrealized gains (losses)
 
(512
)
 
(374
)
Balance, end of year
 
$
4,841

 
$
14,471

The following table summarizes the changes in the Fair Value of the Company’s Non-U.S. Plans’ Level 3 assets for the year ended September 28, 2012 (in thousands):
 
 
Infrastructure
/ Raw Goods
 
Real
Estate
 
Insurance
Contracts
 
Hedge
Funds
Balance, beginning of year
 
$
4,776

 
$
43,997

 
$
17,293

 
$
81,776

Purchases, sales, and settlements
 

 
106

 
389

 

Realized and unrealized gains
 
1,572

 
3,836

 
1,422

 
7,975

Effect of exchange rate changes
 
(237
)
 
1,598

 
(813
)
 
3,649

Balance, end of year
 
$
6,111

 
$
49,537

 
$
18,291

 
$
93,400

The following table summarizes the changes in the Fair Value of the Company’s U.S. Plans’ Level 3 assets for the year ended September 30, 2011 (in thousands):
 
 
Real
Estate
 
Hedge
Funds
Balance, beginning of year
 
$
3,164

 
$
5,491

Transfers
 
4,661

 
9,208

Realized and unrealized losses
 
(2,472
)
 
146

Balance, end of year
 
$
5,353

 
$
14,845



F-28

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table summarizes the changes in the Fair Value of the Company’s Non-U.S. Plans’ Level 3 assets for the year ended September 30, 2011 (in thousands): 
 
 
Infrastructure
/ Raw Goods
 
Real
Estate
 
Insurance
Contracts
 
Hedge
Funds
 
“With Profits”
Funds
Balance, beginning of year
 
$

 
$
38,351

 
$
27,465

 
$
83,209

 
$
1,482

Purchases, sales, and settlements
 
4,776

 
2,248

 
323

 
(1,452
)
 

Realized and unrealized gains
 

 
3,799

 
593

 
937

 

Transfers
 

 

 
(10,964
)
 

 
(1,513
)
Effect of exchange rate changes
 

 
(401
)
 
(124
)
 
(918
)
 
31

Balance, end of year
 
$
4,776

 
$
43,997

 
$
17,293

 
$
81,776

 
$

The following table presents the amount of cash contributions we anticipate making into the plans during fiscal 2013 (in thousands): 
U.S.
Pension Plans
 
Non-U.S.
Pension  Pans
$
13,812

 
$
49,253

The following table presents the total benefit payments expected to be paid to pension plan participants during each of the next five fiscal years, and in total for the five years thereafter (in thousands):
 
 
U.S. Pension Plans
 
Non-U.S.
Pension  Pans
2013
 
$
35,903

 
$
33,149

2014
 
36,749

 
39,595

2015
 
37,330

 
42,413

2016
 
38,833

 
47,803

2017
 
39,325

 
50,051

For the period 2018 through 2022
 
198,441

 
320,194

The following table presents the components of net periodic pension cost for the Company’s U.S. plans recognized in the accompanying Consolidated Statements of Earnings for each of the last three fiscal years (in thousands):
 
 
2012
 
2011
 
2010
Service cost
 
$
12,838

 
$
10,684

 
$

Interest cost
 
20,923

 
21,377

 
7,545

Expected return on plan assets
 
(23,764
)
 
(23,558
)
 
(10,566
)
Actuarial loss
 
10,981

 
7,025

 
1,846

Prior service cost
 
(103
)
 
(103
)
 

Net pension cost, before special items
 
20,875

 
15,425

 
(1,175
)
Special termination benefits
 

 
120

 

Settlement loss
 
6,035

 

 

Total net periodic pension cost recognized
 
$
26,910

 
$
15,545

 
$
(1,175
)





F-29

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents the components of net periodic pension cost for the Company’s Non-U.S. plans recognized in the accompanying Consolidated Statements of Earnings for each of the last three fiscal years (in thousands):
 
 
2012
 
2011
 
2010
Service cost
 
$
22,723

 
$
30,816

 
$
22,722

Interest cost
 
54,287

 
54,631

 
46,584

Expected return on plan assets
 
(50,996
)
 
(50,033
)
 
(36,988
)
Actuarial loss
 
8,227

 
13,535

 
10,488

Prior service cost
 
152

 
303

 
293

Net pension cost, before special
    items
 
34,393

 
49,252

 
43,099

Curtailments and settlements
 
1,326

 
381

 
1,206

Total net periodic pension cost
    recognized
 
$
35,719

 
$
49,633

 
$
44,305

Multiemployer Plans
In Canada and the U.S. we contribute to various trusteed pension plans covering hourly construction employees under industry-wide agreements. We also contribute to various trusteed plans in Australia and certain countries in Europe covering both hourly and certain salaried employees. Contributions are based on the hours worked by employees covered under these agreements and are charged to direct costs of contracts on a current basis.
The majority of the contributions the Company makes to multiemployer pension plans is outside the U.S. With respect to these multiemployer plans, the Company's liability to fund these plans is generally limited to the contributions we are required to make under collective bargaining agreements.
At October 1, 2011, the Company adopted ASU 2011-09—Compensation-Retirement Benefits-Multiemployer Plans. Based on our review of our multiemployer pension plans under the guidance provided in the ASU, we have concluded that none of the multiemployer pension plans into which we contribute are individually significant to our consolidated financial statements.
The following table presents the Company’s contributions to these multiemployer plans during each of the last three fiscal years (in thousands):
 
 
2012
 
2011
 
2010
Canada
 
$
72,053

 
$
81,608

 
$
54,695

Europe and Australia
 
10,808

 
12,613

 
6,629

United States
 
4,420

 
4,049

 
4,058

Total
 
$
87,281

 
$
98,270

 
$
65,382


8. Savings and Deferred Compensation Plans
Savings Plans
We sponsor various defined contribution savings plans which allow participants to make voluntary contributions by salary deduction. Such plans cover substantially all of our domestic, nonunion employees in the U.S. and are qualified under Section 401(k) of the U.S. IRC. Similar plans outside the U.S. cover various groups of employees of our international subsidiaries and affiliates. Several of these plans allow the Company to match, on a voluntary basis, a portion of the employee contributions. The following table presents the Company’s contributions to these savings plans during each of the last three fiscal years (in thousands):
2012
 
2011
 
2010
$
70,211

 
$
61,065

 
$
57,346


F-30

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Deferred Compensation Plans
Our Executive Security Plan and Executive Deferral Plans are nonqualified deferred compensation programs that provide benefits payable to directors, officers, and certain key employees or their designated beneficiaries at specified future dates, upon retirement, or death. Benefit payments under both plans are funded by a combination of contributions from participants and the Company, and most of the participants are covered by life insurance policies with the Company designated as the beneficiary. The following table presents the amount charged to expense for the Company’s deferred compensation plans during each of the last three fiscal years (in thousands):
2012
 
2011
 
2010
$
4,349

 
$
3,075

 
$
3,631

 

9. Income Taxes
The following table presents the components of our consolidated income tax expense for each of the last three fiscal years (in thousands):
 
 
 
2012
 
2011
 
2010
Current income tax expense:
 
 
 
 
 
 
Federal
 
$
111,035

 
$
102,903

 
$
123,154

State
 
23,303

 
25,067

 
23,477

Foreign
 
69,080

 
37,617

 
22,909

Total current tax expense
 
203,418

 
165,587

 
169,540

Deferred income tax expense (benefit):
 
 
 
 
 
 
Federal
 
(2,505
)
 
10,482

 
(19,518
)
State
 
(1,985
)
 
(1,760
)
 
(675
)
Foreign
 
3,454

 
7,131

 
(3,700
)
Total deferred income tax
   expense (benefit)
 
(1,036
)
 
15,853

 
(23,893
)
Consolidated income tax expense
 
$
202,382

 
$
181,440

 
$
145,647


F-31

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Deferred taxes reflect the tax effects of the differences between the amounts recorded as assets and liabilities for financial reporting purposes and the comparable amounts recorded for income tax purposes. Deferred tax assets and liabilities are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. The following table presents the components of our net deferred tax assets at September 28, 2012 and September 30, 2011 (in thousands):
 
 
 
2012
 
2011
Deferred tax assets:
 
 
 
 
Obligations relating to:
 
 
 
 
Defined benefit pension plans
 
$
103,984

 
$
80,632

Other employee benefit plans
 
173,515

 
151,855

Self-insurance programs
 
10,847

 
14,999

Contract revenues and costs
 
39,894

 
15,333

Foreign tax credits carryforward
 

 
320

Other
 
10,749

 
9,081

Gross deferred tax assets
 
338,989

 
272,220

Deferred tax liabilities:
 
 
 
 
Depreciation and amortization
 
(125,704
)
 
(130,536
)
Residual US tax on unremitted non-US
    earnings
 
(9,024
)
 
(3,188
)
Other, net
 
(10,709
)
 
(3,880
)
Gross deferred tax liabilities
 
(145,437
)
 
(137,604
)
Net deferred tax assets
 
$
193,552

 
$
134,616

The following table presents the income tax benefits realized from the exercise of nonqualified stock options and disqualifying dispositions of stock sold under our employee stock purchase plans during each of the last three fiscal years (in millions):
2012
 
2011
 
2010
$
9.3

 
$
11.9

 
$
4.0

 
The following table reconciles total income tax expense using the statutory U.S. federal income tax rate to the consolidated income tax expense shown in the accompanying Consolidated Statements of Earnings for each of the last three fiscal years (dollars in thousands):
 
 
2012
 
2011
 
2010
Statutory amount
 
$
207,668

 
$
180,831

 
$
137,177

State taxes, net of the federal
    benefit
 
13,538

 
15,150

 
14,821

Tax differential on foreign
    earnings
 
(16,667
)
 
(7,841
)
 
(7,178
)
Other, net
 
(2,157
)
 
(6,700
)
 
827

Consolidated income tax expense
 
$
202,382

 
$
181,440

 
$
145,647

Rates used to compute statutory
    amount
 
35.0
%
 
35.0
%
 
35.0
%
Consolidated effective income
    tax rate
 
34.1
%
 
35.1
%
 
37.2
%
The following table presents income tax payments made during each of the last three fiscal years (in millions):
2012
 
2011
 
2010
$
191.4

 
$
139.2

 
$
170.8


F-32

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents the components of our consolidated earnings before taxes for each of the last three fiscal years (in thousands):
 
 
2012
 
2011
 
2010
United States earnings
 
$
286,987

 
$
341,059

 
$
295,144

Foreign earnings
 
306,349

 
175,602

 
96,790

 
 
$
593,336

 
$
516,661

 
$
391,934

United States income taxes, net of applicable credits, have been provided on the undistributed earnings of the Company’s foreign subsidiaries, except in those instances where the earnings are expected to be permanently reinvested. At September 28, 2012, approximately $26.1 million of such undistributed earnings of certain foreign subsidiaries was expected to be permanently reinvested. Should these earnings be repatriated, approximately $7.5 million of income taxes would be payable.
The Company accounts for unrecognized tax benefits in accordance with ASC Topic 740. It accounts for interest and penalties on unrecognized tax benefits as interest and penalties (i.e., not as part of income tax expense). The Company’s liability for gross unrecognized tax benefits was $53.6 million and $31.1 million at September 28, 2012 and September 30, 2011, respectively, all of which, if recognized, would affect the Company’s consolidated effective income tax rate. The Company had $48.8 million and $4.0 million in accrued interest and penalties at September 28, 2012 and September 30, 2011, respectively. The increase in interest and penalties as well as the addition in the unrecognized tax benefit during fiscal 2012 relates primarily to an acquisition completed in fiscal 2012. The Company estimates that, within 12 months, $2.8 million of gross, primarily non-U.S. unrecognized tax benefits will reverse due to the anticipated expiration of time to assess tax. As of September 28, 2012, the Company’s U.S. federal income tax returns for tax years 2009 through 2012 remain subject to examination.
 The following table presents the reconciliation of the beginning and ending amount of unrecognized tax benefits (in thousands):
Balance at October 1, 2011
 
$
31,130

Additions based on tax positions related to the current year
 
6,110

Additions for tax positions of prior years
 
21,438

Reductions for tax positions of prior years
 
(4,441
)
Settlement
 
(600
)
Balance at September 2012
 
$
53,637


F-33

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


10. Commitments and Contingencies, and Derivative Financial Instruments
Commitments Under Operating Leases
We lease certain of our facilities and equipment under operating leases with net aggregate future lease payments of approximately $863.8 million at September 28, 2012 payable as follows (in thousands):
In fiscal years,
 
2013
$
153,328

2014
130,322

2015
154,854

2016
90,493

2017
78,143

Thereafter
264,717

 
871,857

Amounts representing sublease income
(8,040
)
       Total, net aggregate future lease payments
$
863,817

We recognize rent expense, inclusive of landlord concessions and tenant allowances, over the lease term on a straight-line basis. We also recognize rent expense on a straight-line basis for leases containing fixed escalation clauses and rent holidays. Contingent rentals are included in rent expense as accruable. Operating leases relating to many of our major offices generally contain renewal options, and provide for additional rental based on escalation in operating expenses and real estate taxes.
The following table presents rent expense and sublease income offsetting the Company’s rent expense during each of the last three fiscal years (in thousands):
 
 
2012
 
2011
 
2010
Rent expense
 
$
165,221

 
$
157,955

 
$
155,517

Sublease income
 
(8,402
)
 
(8,315
)
 
(11,160
)
Net rent
 
$
156,819

 
$
149,640

 
$
144,357

Guarantee
We are party to a synthetic lease agreement involving certain real and personal property located in Houston, Texas that we use in our operations. A synthetic lease is a type of off-balance sheet transaction which provides us with certain tax and other financial benefits. Significant terms of the lease are as follows:
End of lease term
2015

End of term purchase option (in thousands)
$
52,200

Residual value guaranty (in thousands)
$
38,800

The lease agreement gives us the right to request an extension of the lease term. We may also assist the owner in selling the property at the end of the lease term, the proceeds from which would be used to reduce our residual value guarantee. In connection with the lease, we entered into a floating-to-fixed interest rate swap agreement with a U.S. bank which fixes the amount of the Company’s lease payments. The notional amount of this hedge at September 28, 2012 was $52.2 million. This instrument allows us to receive a floating rate payment tied to the 1-month LIBOR from the counterparty in exchange for a fixed-rate payment from us. We’ve determined this interest rate swap to be “highly effective” according to U.S. GAAP. The minimum lease payments required by the lease agreement is included in the above lease pay-out schedule. We have determined that the estimated Fair Value of the aforementioned financial guarantee was not significant at September 28, 2012.
Derivative Financial Instruments
In situations where our operations incur contract costs in currencies other than their functional currency, we attempt to have a portion of the related contract revenues denominated in the same currencies as the costs. In those situations where revenues and costs are transacted in different currencies, we sometimes enter into foreign exchange contracts in order to limit our exposure to fluctuating foreign currencies. The Company does not currently have exchange rate sensitive instruments that would have a material effect on our consolidated financial statements or results of operations.

F-34

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


 
Letters of Credit
Letters of credit outstanding at September 28, 2012 totaled $224.9 million. Of this amount $12.1 million has been issued under our revolving credit facility and $212.7 million are issued under separate, committed and uncommitted letter-of-credit facilities.
11. Contractual Guarantees, Litigation, Investigations, and Insurance
In the normal course of business, we are subject to certain contractual guarantees and litigation. The guarantees to which we are a party generally relate to project schedules and plant performance. Most of the litigation in which we are involved has us as a defendant in workers' compensation; personal injury; environmental; employment/labor; professional liability; and other similar lawsuits.
We maintain insurance coverage for various aspects of our business and operations. Our insurance programs have varying coverage limits and maximums, and insurance companies may seek to not pay any claims we might make. We have also elected to retain a portion of losses that occur through the use of various deductibles, limits, and retentions under our insurance programs. As a result, we may be subject to future liability for which we are only partially insured or completely uninsured. We intend to mitigate any such future liability by continuing to exercise prudent business judgment in negotiating the terms and conditions of our contracts. Our insurers are also subject to business risk and, as a result, one or more of them may be unable to fulfill their insurance obligations due to insolvency or otherwise.
Additionally, as a contractor providing services to the U.S. federal government and several of its agencies, we are subject to many levels of audits, investigations, and claims by, or on behalf of, the U.S. federal government with respect to our contract performance, pricing, costs, cost allocations, and procurement practices. Furthermore, our income, franchise, and similar tax returns and filings are also subject to audit and investigation by the Internal Revenue Service, most states within the U.S. as well as by various government agencies representing jurisdictions outside the U.S.
We record in our Consolidated Balance Sheets amounts representing our estimated liability relating to such claims, guarantees, litigation, and audits and investigations. We perform an analysis to determine the level of reserves to establish for insurance-related claims that are known and have been asserted against us, and for insurance-related claims that are believed to have been incurred based on actuarial analysis, but have not yet been reported to our claims administrators as of the respective balance sheet dates. We include any adjustments to such insurance reserves in our consolidated results of operations.
Management believes, after consultation with counsel, that such guarantees, litigation, U.S. government contract-related audits, investigations and claims, and income tax audits and investigations should not have any material adverse effect on our consolidated financial statements.
In March 2008, one of Jacobs' subsidiaries, Carter & Burgess Inc. (“C&B”), filed suit against the City of Victorville in Superior Court in California, for amounts due and owing C&B. In May 2009, the City of Victorville filed a cross-complaint against C&B and Jacobs alleging breach of contract, professional negligence, breach of express and implied warranty, fraud, breach of fiduciary duty and negligent misrepresentation. The City's fraud and punitive damage allegations were dismissed. The case was tried in Riverside Superior Court, California and in December 2010, a jury returned a verdict against C&B for approximately $52 million in damages. An appeal was filed and is currently pending before the Court of Appeal, State Of California, the Fourth Appellate District. As the Company believes that there is insurance coverage for this matter, Jacobs does not expect it to have any material adverse effect on its consolidated financial statements.
On January 20, 2010, Clark County Nevada filed suit against Jacobs and two of its subsidiaries asserting claims arising out of certain construction projects to which Clark County Nevada was the owner and for which Jacobs' subsidiaries served as the project management consultant. Clark County's lawsuit against Jacobs followed years of litigation and arbitration between Clark County and its construction contractor on the applicable projects which had ended unsuccessfully for Clark County and resulted in Clark County paying more than $60 million in settlement and awards. Jacobs denies liability and has been vigorously defending against the County's claims and will continue to do so. In September 2012, the parties agreed to dismiss the litigation in U.S. District Court and proceed, in lieu thereof, in arbitration before three arbitrators. It is anticipated that a hearing on the merits will take place in September 2013. The Company does not expect this matter to have any material adverse effect on its consolidated financial statements.

F-35

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


12. Common and Preferred Stock
Jacobs is authorized to issue two classes of capital stock designated “common stock” and “preferred stock” (each has a par value of $1.00 per share). The preferred stock may be issued in one or more series. The number of shares to be included in a series as well as each series’ designation, relative powers, dividend and other preferences, rights and qualifications, redemption provisions, and restrictions are to be fixed by the Board of Directors at the time each series is issued. Except as may be provided by the Board of Directors in a preferred stock designation, or otherwise provided for by statute, the holders of shares of common stock have the exclusive right to vote for the election of Directors and all other matters requiring stockholder action. The holders of shares of common stock are entitled to dividends if and when declared by the Board of Directors from whatever assets are legally available for that purpose.
 

F-36

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


13. Other Financial Information
Receivables
The following table presents the components of “Receivables” as shown in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 as well as certain other related information (in thousands):
 
 
2012
 
2011
Amounts billed, net
 
$
1,193,500

 
$
1,016,792

Unbilled receivables and other
 
1,110,008

 
996,516

Retentions receivable
 
45,384

 
64,186

Total receivables, net
 
$
2,348,892

 
$
2,077,494

Other information about receivables:
 
 
 
 
Amounts due from the United States federal
    government included above, net of
    advanced billings
 
$
294,327

 
$
288,165

Claims receivable
 
$
26,309

 
$
14,712

Billed receivables consist of amounts invoiced to clients in accordance with the terms of our client contracts and are shown net of an allowance for doubtful accounts. We anticipate that substantially all of such billed amounts will be collected over the next twelve months.
Unbilled receivables and retentions receivable represent reimbursable costs and amounts earned and reimbursable under contracts in progress as of the respective balance sheet dates. Such amounts become billable according to the contract terms, which usually consider the passage of time, achievement of certain milestones or completion of the project. We anticipate that substantially all of such unbilled amounts will be billed and collected over the next twelve months.
Claims receivable are included in “Receivables” in the accompanying Consolidated Balance Sheets and represent certain costs incurred on contracts to the extent it is probable that such claims will result in additional contract revenue and the amount of such additional revenue can be reliably estimated.
Property, Equipment, and Improvements, Net
The following table presents the components of our property, equipment and improvements at September 28, 2012 and September 30, 2011 (in thousands):
 
 
2012
 
2011
Land
 
$
23,786

 
$
23,542

Buildings
 
136,193

 
136,161

Equipment
 
502,568

 
446,628

Leasehold improvements
 
163,916

 
144,903

Construction in progress
 
29,595

 
10,046

 
 
856,058

 
761,280

Accumulated depreciation and amortization
 
(524,927
)
 
(476,647
)
 
 
$
331,131

 
$
284,633


F-37

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Miscellaneous Noncurrent Assets
The following table presents the components of “Miscellaneous noncurrent assets” as shown in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 (in thousands):
 
 
2012
 
2011
Deferred income taxes
 
$
196,620

 
$
161,540

Cash surrender value of life insurance policies
 
86,502

 
75,440

Intangible assets (a)
 
243,762

 
259,006

Investments
 
187,248

 
185,590

Notes receivable
 
11,128

 
6,942

Reimbursable pension costs (b)
 
132,463

 
140,878

Other
 
28,162

 
32,338

Total
 
$
885,885

 
$
861,734

(a)    Consists primarily of intangible assets acquired in connection with various business combinations.
(b)
Consists of costs incurred relating to a defined benefit pension plan covering employees providing services on a contract with, and for the benefit of, the U.S. federal government pursuant to which such costs are fully reimbursable.

Accrued Liabilities
The following table presents the components of “Accrued liabilities” as shown in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 (in thousands):
 
 
 
2012
 
2011
Accrued payroll and related liabilities
 
$
641,340

 
$
535,631

Project-related accruals
 
196,836

 
221,386

Insurance liabilities
 
63,908

 
54,945

Sales and other similar taxes
 
41,951

 
38,395

Deferred rent
 
41,342

 
20,021

Other
 
76,592

 
66,913

Total
 
$
1,061,969

 
$
937,291

Other Deferred Liabilities
The following table presents the components of “Other deferred liabilities” as shown in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 (in thousands):
 
 
2012
 
2011
Liabilities relating to defined benefit pension
    and early retirement plans
 
$
474,555

 
$
419,324

Liabilities relating to nonqualified deferred
    compensation arrangements
 
92,618

 
85,032

Deferred income taxes
 
145,437

 
137,604

Miscellaneous
 
83,728

 
63,313

Total
 
$
796,338

 
$
705,273


F-38

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Total Accumulated Other Comprehensive Loss
The following table presents the components of “Total accumulated other comprehensive loss” as shown in the accompanying Consolidated Balance Sheets at September 28, 2012 and September 30, 2011 (in thousands):
 
 
2012
 
2011
Foreign currency translation adjustments
 
$
(9,149
)
 
$
(38,437
)
Adjustments relating to defined benefit pension
   plans
 
(269,892
)
 
(193,950
)
Other
 
(2,846
)
 
(5,151
)
Total
 
$
(281,887
)
 
$
(237,538
)
Supplemental Cash Flow Information
During fiscal 2012 and fiscal 2011, the Company acquired businesses for cash and stock of $91.6 million and $711.4 million, respectively. The following table presents the non-cash adjustments relating to these acquisitions made in preparing the accompanying Consolidated Statements of Cash Flows (in thousands):
 
 
2012
 
2011
Working capital
 
$
9,937

 
$
(128,251
)
Property and equipment
 
3,378

 
33,195

Noncurrent assets
 
17,591

 
15,723

Deferred liabilities
 
(8,177
)
 
(55,225
)
Non-controlling interests
 
40

 
(1,936
)
Foreign currency translation
 
21

 
(79
)
Goodwill
 
68,785

 
847,993


F-39

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


14. Segment Information
As discussed above, we provide a broad range of technical, professional, and construction services. We provide our services through offices and subsidiaries located primarily in North America, South America, Europe, the Middle East, India, Australia, Africa, and Asia.
All of our operations share similar economic characteristics. For example, all of our operations are highly influenced by the general availability of qualified engineers and other technical professional staff. They also provide similar services as well as share similar processes for delivering our services. There is also a high degree of similarity of the workforces employed among the various categories of services we provide. For example, engineering and design services (i.e., services provided by persons who are degreed, and in certain circumstances licensed, professionals such as engineers, architects, scientists, and economists) exist in all four service categories. In addition, there is a high degree of similarity among a significant component of the workforces we employ to perform construction and operations and maintenance projects. In providing construction and operations and maintenance services, we employ a large number of skilled craft labor personnel. These include welders, pipe fitters, electricians, crane operators, and other personnel who work on very large capital projects (in the case of projects classified within the construction services category) or on smaller capital projects (in the case of maintenance projects classified within the operations and maintenance services category). In addition, the use of technology is highly similar and consistent throughout our organization, as is our client base (with the exception of our operations outside the U.S., which perform very little work for the U.S. federal government), and our quality assurance and safety programs. Furthermore, the types of information and internal reports used by the Company’s chief operating decision maker and other members of management to monitor performance, evaluate results of operations, allocate resources, and otherwise manage the business support a single reportable segment. Accordingly, based on these operational similarities and the way management monitors the Company’s results of operations, we have concluded that our operations may be aggregated into one reportable segment for purposes of this disclosure.
The following table presents certain financial information by geographic area for fiscal 2012, 2011, and 2010 (in thousands):
 
 
2012
 
2011
 
2010
Revenues:
 
 
 
 
 
 
United States
 
$
6,749,583

 
$
6,435,078

 
$
6,969,264

Europe
 
1,681,421

 
1,649,678

 
1,666,325

Canada
 
1,564,883

 
1,656,487

 
989,298

Asia
 
156,748

 
102,272

 
98,259

India
 
124,362

 
103,842

 
54,413

Australia
 
253,932

 
194,560

 
28,589

South America and Mexico
 
158,141

 
109,520

 
10,149

Middle East and Africa
 
204,708

 
130,227

 
99,220

Total
 
$
10,893,778

 
$
10,381,664

 
$
9,915,517

Long-Lived Assets:
 
 
 
 
 
 
United States
 
$
203,746

 
$
169,914

 
$
122,551

Europe
 
46,763

 
49,372

 
53,586

Canada
 
47,539

 
42,496

 
21,859

Asia
 
3,580

 
1,653

 
809

India
 
17,094

 
16,831

 
13,372

Australia
 
7,859

 
1,040

 
356

South America and Mexico
 
2,400

 
1,533

 
821

Middle East and Africa
 
2,150

 
1,794

 
1,678

Total
 
$
331,131

 
$
284,633

 
$
215,032

Revenues were earned from unaffiliated clients located primarily within the various and respective geographic areas shown. Long-lived assets consist of property and equipment, net of accumulated depreciation and amortization.

F-40

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


The following table presents the revenues earned directly or indirectly from the U.S. federal government and its agencies, expressed as a percentage of total revenues, for fiscal 2012, 2011, and 2010:

2012
 
2011
 
2010
22.1
 
24.4
 
25.4


 

F-41

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


15. Selected Quarterly Information — Unaudited
The following table presents selected quarterly financial information for each of the last three fiscal years. Amounts are presented in thousands, except for per share amounts:
 
 
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
 
 
Fourth
Quarter
 
 
 
Fiscal
Year
 
 
2012
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Revenues
 
$
2,631,768

 
$
2,702,851

 
$
2,772,874

 
  
 
$
2,786,285

 
 
 
$
10,893,778

 
  
Operating profit (a)
 
141,952

 
133,138

 
153,366

 
  
 
167,617

 
 
 
596,073

 
  
Earnings before taxes
 
139,554

 
132,315

 
151,371

 
  
 
170,096

 
 
 
593,336

 
  
Net earnings of the Group
 
91,436

 
87,446

 
100,990

 
  
 
111,082

 
 
 
390,954

 
  
Net earnings attributable to
   Jacobs
 
89,710

 
83,933

 
97,900

 
  
 
107,411

 
(b) 
 
378,954

 
(b) 
Earnings per share:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Basic
 
0.71

 
0.66

 
0.77

 
  
 
0.84

 
(b) 
 
2.97

 
(b) 
Diluted
 
0.70

 
0.65

 
0.76

 
  
 
0.83

 
(b) 
 
2.94

 
(b) 
2011
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Revenues
 
$
2,356,175

 
$
2,558,016

 
$
2,744,178

 
  
 
$
2,723,295

 
 
 
$
10,381,664

 
  
Operating profit (a)
 
103,619

 
128,015

 
139,380

 
  
 
147,904

 
 
 
518,918

 
  
Earnings before taxes
 
103,723

 
126,481

 
141,301

 
  
 
145,156

 
 
 
516,661

 
  
Net earnings of the Group
 
66,697

 
81,341

 
91,936

 
  
 
95,247

 
 
 
335,221

 
  
Net earnings attributable to
   Jacobs
 
65,823

 
80,250

 
90,676

 
  
 
94,280

 
 
 
331,029

 
 
Earnings per share:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Basic
 
0.53

 
0.64

 
0.72

 
  
 
0.75

 
 
 
2.63

 
 
Diluted
 
0.52

 
0.63

 
0.71

 
  
 
0.74

 
 
 
2.60

 
 
2010
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Revenues
 
$
2,477,785

 
$
2,586,974

 
$
2,507,725

 
  
 
$
2,343,033

 
 
 
$
9,915,517

 
  
Operating profit (a)
 
113,481

 
122,004

 
45,083

 
  
 
119,515

 
 
 
400,083

 
  
Earnings before taxes
 
113,148

 
121,160

 
37,239

 
  
 
120,387

 
 
 
391,934

 
  
Net earnings of the Group
 
72,401

 
77,567

 
19,240

 
  
 
77,079

 
 
 
246,287

 
  
Net earnings attributable to
   Jacobs
 
72,437

 
77,500

 
19,043

 
(c) 
 
76,994

 
 
 
245,974

 
(c) 
Earnings per share:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Basic
 
0.59

 
0.63

 
0.15

 
(c) 
 
0.62

 
 
 
1.98

 
(c) 
Diluted
 
0.58

 
0.62

 
0.15

 
(c) 
 
0.61

 
 
 
1.96

 
(c) 
 
(a)
Operating profit represents revenues less (i) direct costs of contracts, and (ii) selling, general and administrative expenses.
(b)
Includes a one-time, after-tax gain of $4.0 million, or $0.03 per diluted share, related to the sale of the Company's intellectual property for iron ore pelletizing and certain other related assets.
(c)
Includes a non-recurring loss of $60.3 million, or $0.48 per basic and diluted share, related to the SIVOM Judgment.

F-42

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


16.
Definitions
The following terms used in the accompanying Consolidated Financial Statements and these Notes to Consolidated Financial Statements have the meanings set forth below:
“1981 Plan” means the Jacobs Engineering Group Inc. 1981 Executive Incentive Plan, as amended. The 1981 Plan is a shareholder-approved, equity-based compensation program. It covered employees of the Company as well as Jacobs' outside directors. The 1981 Plan was replaced in 2000 with the 1999 SIP and the 1999 ODSP.
“1989 ESPP” means the Jacobs Engineering Group Inc. 1989 Employee Stock Purchase Plan, as amended. The 1989 ESPP is a shareholder-approved, broad-based, employee stock purchase plan qualified under Section 423 of the U.S. IRC.
“1999 ODSP" means the Jacobs Engineering Group Inc. 1999 Outside Director Stock Plan, as amended. The 1999 ODSP is a shareholder-approved, equity-based compensation plan covering Jacobs' non-management directors.
“1999 SIP” means the Jacobs Engineering Group Inc. Stock Incentive Plan, as amended. The 1999 SIP is a shareholder-approved, equity-based compensation plan covering the Company's officers and key employees.
“ASC” refers to the Accounting Standards Codification as maintained by the FASB. The ASC is the primary source of U.S. GAAP to be applied by the Company and all other nongovernmental entities. The ASC organizes and presents hundreds of previously separate pieces of authoritative accounting guidance into a single on-line research database. The accounting principles promulgated by the ASC are organized therein by broad topics, and is updated by the FASB through the issuances of ASUs.
“ASU” means Accounting Standards Updates, the primary means by which the ASC is updated by the FASB.
“Company” (including “we”, “us” or “our”) means Jacobs Engineering Group Inc. and its consolidated subsidiaries and affiliates.
“Consolidated EBITDA" generally means consolidated net earnings attributable to Jacobs, plus consolidated (i) interest expense, (ii) tax expense, and (iii) depreciation and amortization expense (including amortization expense relating to intangible assets).
"Consolidated Funded Indebtedness" generally means the sum of (i) the balances outstanding under all loan, credit, and similar agreements for borrowed money (including purchase money indebtedness), (ii) all amounts representing direct obligations arising under letters of credit, (iii) indebtedness in respect of capital leases and similar financing arrangements, and (iv) the value of all guarantees issued with respect to the types of indebtedness described in (i) through (iii).
"Consolidated Leverage Ratio" means, as of any date of determination, the ratio of (i) the Company's "Consolidated Funded Indebtedness" as of such date to (ii) the Company's "Consolidated EBITDA" for the immediately preceding four consecutive fiscal quarters.
“EPS” means earnings-per-share. “Basic EPS” is computed by dividing the consolidated net earnings attributable to Jacobs by the weighted average number of shares of common stock outstanding during the period. “Diluted EPS” is computed in a manner similar to the computation of Basic EPS, but gives effect to all dilutive securities that were outstanding during the period. Our dilutive securities consist of nonqualified stock options and restricted stock (including restricted stock units)
“Fair Value” means the price that would be received from selling an asset, or paid to transfer a liability, in an orderly transaction between market participants as of the date fair value is determined (i.e., the “measurement date”). When determining fair value, U.S. GAAP requires that we consider the principal or most advantageous market in which we would transact any sale or purchase. U.S. GAAP also requires that the inputs (factors) we use (consider) to determine Fair Value be considered in the following order of priority:
Level 1 inputs are quoted prices in active markets for identical assets or liabilities;
Level 2 inputs are observable inputs (other than quoted prices in active markets included in Level 1) such as (i) quoted prices for similar assets or liabilities, (ii) quoted prices in markets that have insufficient volume or infrequent transactions (i.e., less active markets), and (iii) model-driven valuations in which all significant inputs are observable or can be derived principally from, or corroborated with, observable market data for substantially the full term of the asset or liability; and

F-43

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)


Level 3 inputs are unobservable inputs to the valuation methodology that are significant to the fair value measurement.
“FASB” means the Financial Accounting Standards Board. The FASB is the designated organization within the U.S. for establishing standards of financial accounting that govern the preparation of financial reports by nongovernmental entities.
“GESPP” means the Jacobs Engineering Group Inc. Global Employee Stock Purchase Plan, as amended. The GESPP is a shareholder-approved, broad-based, employee stock purchase plan covering employees of certain of Jacobs' non-U.S. subsidiaries.
“Group” refers to the combined economic interests and activities of Jacobs and the persons and entities holding noncontrolling interests in the subsidiaries and affiliates that are consolidated into the accompanying Consolidated Financial Statements.
“Jacobs” means Jacobs Engineering Group Inc.
"SIVOM Judgment" refers to an unfavorable court judgment we received in June 2010 from an Administrative Tribunal in Strasbourg, France relating to a waste incineration plant project in France. The dispute involved a project to design and build a waste incineration plant in Sausheim, France by a consortium led by Serete (an entity we acquired in 1997) for the SIVOM de Mulhousienne (the "SIVOM"). The contract was entered into in 1996, prior to the acquisition of Serete. Jacobs filed suit in 2002 seeking approximately $49.0 million in damages to recover its contract balance and additional project costs that it had incurred. The SIVOM counterclaimed for project completion costs, increased operating costs, and costs relating to emissions problems. As a result of the judgment, the Company recorded a pre-tax charge to earnings of approximately $93.3 million. Included in this amount is a $25.9 million write-off of revenue. The balance of the charge reflects the cash payments the Company made to the SIVOM, net of cash payments the Company received.
“U.S. GAAP” means those accounting principles and practices generally accepted in the United States.
“U.S. IRC” means the U.S. Internal Revenue Code of 1986, as amended.
“VIE” means a “Variable Interest Entity” as defined in U.S. GAAP. A VIE is a legal entity in which equity investors do not have sufficient equity at risk for the entity to finance its activities without additional subordinated financial support or, as a group, the holders of the equity investment at risk lack any one of the following three characteristics: (i) the power, through voting rights or similar rights, to direct the activities of a legal entity that most significantly impact the entity's economic performance; (ii) the obligation to absorb the expected losses of the legal entity; or (iii) the right to receive the expected residual returns of the legal entity. Accordingly, entities issuing consolidated financial statements (i.e., a “reporting entity”) shall consolidate a VIE if the reporting entity has a “controlling financial interest” in the VIE, as demonstrated by the reporting entity having both (i) the power to direct the activities of a VIE that most significantly impact the VIE's economic performance; and (ii) the the right to receive benefits from the VIE that could potentially be significant to the VIE or the obligation to absorb losses of the VIE that could potentially be significant to the VIE.


F-44

Table of Contents
JACOBS ENGINEERING GROUP INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)



Report of Ernst & Young LLP
Independent Registered Public Accounting Firm

The Board of Directors and Stockholders
Jacobs Engineering Group Inc.

We have audited the accompanying consolidated balance sheets of Jacobs Engineering Group Inc. and subsidiaries as of September 28, 2012 and September 30, 2011, and the related consolidated statements of earnings, comprehensive income, stockholders' equity, and cash flows for each of the three fiscal years in the period ended September 28, 2012. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Jacobs Engineering Group Inc. and subsidiaries at September 28, 2012 and September 30, 2011, and the consolidated results of their operations and their cash flows for each of the three fiscal years in the period ended September 28, 2012, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Jacobs Engineering Group Inc. and subsidiaries' internal control over financial reporting as of September 28, 2012, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated November 20, 2012 expressed an unqualified opinion thereon.




/S/ Ernst & Young LLP
Los Angeles, California
November 20, 2012


F-45

Table of Contents

Report of Ernst & Young LLP
Independent Registered Public Accounting Firm


The Board of Directors and Stockholders
Jacobs Engineering Group Inc.

We have audited Jacobs Engineering Group Inc. and subsidiaries' internal control over financial reporting as of September 28, 2012, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Jacobs Engineering Group Inc. and subsidiaries' management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the company's internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Jacobs Engineering Group Inc. and subsidiaries maintained, in all material respects, effective internal control over financial reporting as of September 28, 2012, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Jacobs Engineering Group Inc. and subsidiaries as of September 28, 2012 and September 30, 2011 and the related consolidated statements of earnings, comprehensive income, stockholders' equity, and cash flows for each of the three fiscal years in the period ended September 28, 2012 of Jacobs Engineering Group Inc. and subsidiaries and our report dated November 20, 2012 expressed an unqualified opinion thereon.




/S/ Ernst & Young LLP
Los Angeles, California
November 20, 2012


F-46